All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Xu Yang <xu.yang_2@nxp.com>
Cc: gregkh@linuxfoundation.org, krzysztof.kozlowski+dt@linaro.org,
	shawnguo@kernel.org, conor+dt@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	peter.chen@kernel.org, jun.li@nxp.com, linux-usb@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	imx@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v8 05/10] dt-bindings: usb: ci-hdrc-usb2-imx: add restrictions for reg, interrupts, clock and clock-names properties
Date: Tue, 12 Mar 2024 08:50:35 -0600	[thread overview]
Message-ID: <20240312145035.GA2204647-robh@kernel.org> (raw)
In-Reply-To: <20240312091703.1220649-5-xu.yang_2@nxp.com>

On Tue, Mar 12, 2024 at 05:16:58PM +0800, Xu Yang wrote:
> Add restrictions for reg, interrupts, clock and clock-names properties
> for imx Socs.
> 
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
> 
> ---
> Changes in v4:
>  - new patch since v3's discussion
>  - split the reg, interrupts, clock and clock-names properties into
>    common part and device-specific
> Changes in v5:
>  - keep common property unchanged
>  - make if-then more readable
>  - remove non imx part
> Changes in v6:
>  - new patch based on ci-hdrc-usb2-imx.yaml
> Changes in v7:
>  - no changes
> Changes in v8:
>  - remove if:else:if:else:if:else block
> ---
>  .../bindings/usb/chipidea,usb2-imx.yaml       | 80 +++++++++++++++++++
>  1 file changed, 80 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml b/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
> index cdbb224e9f68..fb1c378dfe88 100644
> --- a/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
> +++ b/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
> @@ -49,6 +49,12 @@ properties:
>            - const: fsl,imx6ul-usb
>            - const: fsl,imx27-usb
>  
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
>    clocks:
>      minItems: 1
>      maxItems: 3
> @@ -144,6 +150,80 @@ allOf:
>              - const: idle
>              - const: active
>  
> +  # imx27 Soc needs three clocks
> +  - if:
> +      properties:
> +        compatible:
> +          const: fsl,imx27-usb
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 3
> +          maxItems: 3

The max is already 3, so drop maxItems.

> +        clock-names:
> +          items:
> +            - const: ipg
> +            - const: ahb
> +            - const: per
> +
> +  # imx25 and imx35 Soc need three clocks
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx25-usb
> +              - fsl,imx35-usb
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 3
> +          maxItems: 3

Same here.

> +        clock-names:
> +          items:
> +            - const: ipg
> +            - const: ahb
> +            - const: per
> +
> +  # imx7d Soc need one clock
> +  - if:
> +      properties:
> +        compatible:
> +          items:
> +            - const: fsl,imx7d-usb
> +            - const: fsl,imx27-usb
> +    then:
> +      properties:
> +        clocks:
> +          maxItems: 1
> +        clock-names:
> +          maxItems: 1

What's the name?

> +
> +  # other Soc need one clock
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx23-usb
> +              - fsl,imx28-usb
> +              - fsl,imx50-usb
> +              - fsl,imx51-usb
> +              - fsl,imx53-usb
> +              - fsl,imx6q-usb
> +              - fsl,imx6sl-usb
> +              - fsl,imx6sx-usb
> +              - fsl,imx6ul-usb
> +              - fsl,imx8mm-usb
> +              - fsl,imx8mn-usb
> +              - fsl,vf610-usb
> +    then:
> +      properties:
> +        clocks:
> +          maxItems: 1
> +        clock-names:
> +          maxItems: 1
> +
>  unevaluatedProperties: false
>  
>  examples:
> -- 
> 2.34.1
> 

WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Xu Yang <xu.yang_2@nxp.com>
Cc: gregkh@linuxfoundation.org, krzysztof.kozlowski+dt@linaro.org,
	shawnguo@kernel.org, conor+dt@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	peter.chen@kernel.org, jun.li@nxp.com, linux-usb@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	imx@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v8 05/10] dt-bindings: usb: ci-hdrc-usb2-imx: add restrictions for reg, interrupts, clock and clock-names properties
Date: Tue, 12 Mar 2024 08:50:35 -0600	[thread overview]
Message-ID: <20240312145035.GA2204647-robh@kernel.org> (raw)
In-Reply-To: <20240312091703.1220649-5-xu.yang_2@nxp.com>

On Tue, Mar 12, 2024 at 05:16:58PM +0800, Xu Yang wrote:
> Add restrictions for reg, interrupts, clock and clock-names properties
> for imx Socs.
> 
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
> 
> ---
> Changes in v4:
>  - new patch since v3's discussion
>  - split the reg, interrupts, clock and clock-names properties into
>    common part and device-specific
> Changes in v5:
>  - keep common property unchanged
>  - make if-then more readable
>  - remove non imx part
> Changes in v6:
>  - new patch based on ci-hdrc-usb2-imx.yaml
> Changes in v7:
>  - no changes
> Changes in v8:
>  - remove if:else:if:else:if:else block
> ---
>  .../bindings/usb/chipidea,usb2-imx.yaml       | 80 +++++++++++++++++++
>  1 file changed, 80 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml b/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
> index cdbb224e9f68..fb1c378dfe88 100644
> --- a/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
> +++ b/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
> @@ -49,6 +49,12 @@ properties:
>            - const: fsl,imx6ul-usb
>            - const: fsl,imx27-usb
>  
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
>    clocks:
>      minItems: 1
>      maxItems: 3
> @@ -144,6 +150,80 @@ allOf:
>              - const: idle
>              - const: active
>  
> +  # imx27 Soc needs three clocks
> +  - if:
> +      properties:
> +        compatible:
> +          const: fsl,imx27-usb
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 3
> +          maxItems: 3

The max is already 3, so drop maxItems.

> +        clock-names:
> +          items:
> +            - const: ipg
> +            - const: ahb
> +            - const: per
> +
> +  # imx25 and imx35 Soc need three clocks
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx25-usb
> +              - fsl,imx35-usb
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 3
> +          maxItems: 3

Same here.

> +        clock-names:
> +          items:
> +            - const: ipg
> +            - const: ahb
> +            - const: per
> +
> +  # imx7d Soc need one clock
> +  - if:
> +      properties:
> +        compatible:
> +          items:
> +            - const: fsl,imx7d-usb
> +            - const: fsl,imx27-usb
> +    then:
> +      properties:
> +        clocks:
> +          maxItems: 1
> +        clock-names:
> +          maxItems: 1

What's the name?

> +
> +  # other Soc need one clock
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx23-usb
> +              - fsl,imx28-usb
> +              - fsl,imx50-usb
> +              - fsl,imx51-usb
> +              - fsl,imx53-usb
> +              - fsl,imx6q-usb
> +              - fsl,imx6sl-usb
> +              - fsl,imx6sx-usb
> +              - fsl,imx6ul-usb
> +              - fsl,imx8mm-usb
> +              - fsl,imx8mn-usb
> +              - fsl,vf610-usb
> +    then:
> +      properties:
> +        clocks:
> +          maxItems: 1
> +        clock-names:
> +          maxItems: 1
> +
>  unevaluatedProperties: false
>  
>  examples:
> -- 
> 2.34.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2024-03-12 14:50 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-12  9:16 [PATCH v8 01/10] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible Xu Yang
2024-03-12  9:16 ` Xu Yang
2024-03-12  9:16 ` [PATCH v8 02/10] arm64: dts: imx8ulp: add usb nodes Xu Yang
2024-03-12  9:16   ` Xu Yang
2024-03-12  9:16 ` [PATCH v8 03/10] arm64: dts: imx8ulp-evk: enable usb nodes and add ptn5150 nodes Xu Yang
2024-03-12  9:16   ` Xu Yang
2024-03-12  9:16 ` [PATCH v8 04/10] dt-bindings: usb: chipidea,usb2-imx: move imx parts to dedicated schema Xu Yang
2024-03-12  9:16   ` Xu Yang
2024-03-12 14:51   ` Rob Herring
2024-03-12 14:51     ` Rob Herring
2024-03-12  9:16 ` [PATCH v8 05/10] dt-bindings: usb: ci-hdrc-usb2-imx: add restrictions for reg, interrupts, clock and clock-names properties Xu Yang
2024-03-12  9:16   ` Xu Yang
2024-03-12 14:50   ` Rob Herring [this message]
2024-03-12 14:50     ` Rob Herring
2024-03-13  2:48     ` [EXT] " Xu Yang
2024-03-13  2:48       ` Xu Yang
2024-03-13  3:07       ` Frank Li
2024-03-13  3:07         ` Frank Li
2024-03-13  3:26         ` Xu Yang
2024-03-13  3:26           ` Xu Yang
2024-03-13  7:25       ` Krzysztof Kozlowski
2024-03-13  7:25         ` Krzysztof Kozlowski
2024-03-13 10:31         ` Xu Yang
2024-03-13 10:31           ` Xu Yang
2024-03-12  9:16 ` [PATCH v8 06/10] dt-bindings: usb: ci-hdrc-usb2-imx: add compatible and clock-names restriction for imx93 Xu Yang
2024-03-12  9:16   ` Xu Yang
2024-03-12 14:52   ` Rob Herring
2024-03-12 14:52     ` Rob Herring
2024-03-12  9:17 ` [PATCH v8 07/10] ARM: dts: imx6: remove fsl,anatop property from usb controller node Xu Yang
2024-03-12  9:17   ` Xu Yang
2024-03-12  9:17 ` [PATCH v8 08/10] arm64: dts: imx93: add usb nodes Xu Yang
2024-03-12  9:17   ` Xu Yang
2024-03-12  9:17 ` [PATCH v8 09/10] arm64: dts: imx93-11x11-evk: enable usb and typec nodes Xu Yang
2024-03-12  9:17   ` Xu Yang
2024-03-12  9:17 ` [PATCH v8 10/10] usb: chipidea: ci_hdrc_imx: align usb wakeup clock name with dt-bindings Xu Yang
2024-03-12  9:17   ` Xu Yang
2024-03-12 14:33 ` [PATCH v8 01/10] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible Rob Herring
2024-03-12 14:33   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240312145035.GA2204647-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=imx@lists.linux.dev \
    --cc=jun.li@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=peter.chen@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=xu.yang_2@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.