[PATCH v2] dt-bindings: usb: qcom,pmic-typec: update example to follow connector schema

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

Update Qualcomm PMIC Type-C examples to follow the USB-C connector
schema. The USB-C connector should have three ports (USB HS @0,
SSTX/RX @1 and SBU @2 lanes). Reorder ports accordingly and add SBU port
connected to the SBU mux (e.g. FSA4480).

Fixes: 00bb478b829e ("dt-bindings: usb: Add Qualcomm PMIC Type-C")
Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Update examples to follow usb-c-connector schema wrt. ports definitions.
---
Changes in v2:
- Dropped patch removing the role-switching port. We do not use it, but
  it can become useful by other designs.
- Link to v1: https://lore.kernel.org/r/20240322-typec-fix-example-v1-0-6b01c347419e@linaro.org
---
 .../devicetree/bindings/usb/qcom,pmic-typec.yaml   | 34 +++++++++++++++++-----
 1 file changed, 26 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
index d9694570c419..fe757619e535 100644
--- a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
@@ -192,15 +192,22 @@ examples:
 
                     port@0 {
                         reg = <0>;
-                        pmic_typec_mux_out: endpoint {
-                            remote-endpoint = <&usb_phy_typec_mux_in>;
+                        pmic_typec_hs_in: endpoint {
+                            remote-endpoint = <&usb_hs_out>;
                         };
                     };
 
                     port@1 {
                         reg = <1>;
-                        pmic_typec_role_switch_out: endpoint {
-                            remote-endpoint = <&usb_role_switch_in>;
+                        pmic_typec_ss_in: endpoint {
+                            remote-endpoint = <&usb_phy_typec_ss_out>;
+                        };
+                    };
+
+                    port@2 {
+                        reg = <2>;
+                        pmic_typec_sbu: endpoint {
+                            remote-endpoint = <&usb_mux_sbu>;
                         };
                     };
                 };
@@ -212,8 +219,8 @@ examples:
         dr_mode = "otg";
         usb-role-switch;
         port {
-            usb_role_switch_in: endpoint {
-                remote-endpoint = <&pmic_typec_role_switch_out>;
+            usb_hs_out: endpoint {
+                remote-endpoint = <&pmic_typec_hs_in>;
             };
         };
     };
@@ -221,8 +228,19 @@ examples:
     usb-phy {
         orientation-switch;
         port {
-            usb_phy_typec_mux_in: endpoint {
-                remote-endpoint = <&pmic_typec_mux_out>;
+            usb_phy_typec_ss_out: endpoint {
+                remote-endpoint = <&pmic_typec_ss_in>;
+            };
+        };
+    };
+
+    usb-mux {
+        orientation-switch;
+        mode-switch;
+
+        port {
+            usb_mux_sbu: endpoint {
+                remote-endpoint = <&pmic_typec_sbu>;
             };
         };
     };

---
base-commit: 13ee4a7161b6fd938aef6688ff43b163f6d83e37
change-id: 20240322-typec-fix-example-3d9b1eca853d

Best regards,
-- 
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>