[PATCH v1 01/16] serial: max3100: Lock port->lock when calling uart_handle_cts_change()

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

uart_handle_cts_change() has to be called with port lock taken,
Since we run it in a separate work, the lcok maybe not taken at
the time of running. Make sure that it's taken by explicitly doing
that. Without it we got a splat:

  WARNING: CPU: 0 PID: 10 at drivers/tty/serial/serial_core.c:3491 uart_handle_cts_change+0xa6/0xb0
  ...
  Workqueue: max3100-0 max3100_work [max3100]
  RIP: 0010:uart_handle_cts_change+0xa6/0xb0
  ...
   max3100_handlerx+0xc5/0x110 [max3100]
   max3100_work+0x12a/0x340 [max3100]

Fixes: 7831d56b0a35 ("tty: MAX3100")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/tty/serial/max3100.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index 5efb2b593be3..45022f2909f0 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -213,7 +213,7 @@ static int max3100_sr(struct max3100_port *s, u16 tx, u16 *rx)
 	return 0;
 }
 
-static int max3100_handlerx(struct max3100_port *s, u16 rx)
+static int max3100_handlerx_unlocked(struct max3100_port *s, u16 rx)
 {
 	unsigned int status = 0;
 	int ret = 0, cts;
@@ -254,6 +254,17 @@ static int max3100_handlerx(struct max3100_port *s, u16 rx)
 	return ret;
 }
 
+static int max3100_handlerx(struct max3100_port *s, u16 rx)
+{
+	unsigned long flags;
+	int ret;
+
+	uart_port_lock_irqsave(&s->port, &flags);
+	ret = max3100_handlerx_unlocked(s, rx);
+	uart_port_unlock_irqrestore(&s->port, flags);
+	return ret;
+}
+
 static void max3100_work(struct work_struct *w)
 {
 	struct max3100_port *s = container_of(w, struct max3100_port, work);
-- 
2.43.0.rc1.1.gbec44491f096