From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
thomas.petazzoni@bootlin.com, "Andrew Lunn" <andrew@lunn.ch>,
"Jakub Kicinski" <kuba@kernel.org>,
"Eric Dumazet" <edumazet@google.com>,
"Paolo Abeni" <pabeni@redhat.com>,
"Russell King" <linux@armlinux.org.uk>,
linux-arm-kernel@lists.infradead.org,
"Christophe Leroy" <christophe.leroy@csgroup.eu>,
"Herve Codina" <herve.codina@bootlin.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"Vladimir Oltean" <vladimir.oltean@nxp.com>,
"Köry Maincent" <kory.maincent@bootlin.com>,
"Jesse Brandeburg" <jesse.brandeburg@intel.com>,
"Jonathan Corbet" <corbet@lwn.net>,
"Marek Behún" <kabel@kernel.org>,
"Piergiorgio Beruto" <piergiorgio.beruto@gmail.com>,
"Oleksij Rempel" <o.rempel@pengutronix.de>,
"Nicolò Veronese" <nicveronese@gmail.com>,
"Simon Horman" <horms@kernel.org>,
mwojtas@chromium.org
Subject: [PATCH net-next v11 00/13] Introduce PHY listing and link_topology tracking
Date: Thu, 4 Apr 2024 11:29:50 +0200 [thread overview]
Message-ID: <20240404093004.2552221-1-maxime.chevallier@bootlin.com> (raw)
Hello everyone,
This is V11 for the link topology addition, allowing to track all PHYs
that are linked to netdevices.
This V11 addresses the various netlink-related issues that were raised
by Jakub, and fixes some typos in the documentation.
As a remainder, here's what the PHY listings would look like :
- eth0 has a 88x3310 acting as media converter, and an SFP module with
an embedded 88e1111 PHY
- eth2 has a 88e1510 PHY
# ethtool --show-phys *
PHY for eth0:
PHY index: 1
Driver name: mv88x3310
PHY device name: f212a600.mdio-mii:00
Downstream SFP bus name: sfp-eth0
PHY id: 0
Upstream type: MAC
PHY for eth0:
PHY index: 2
Driver name: Marvell 88E1111
PHY device name: i2c:sfp-eth0:16
PHY id: 21040322
Upstream type: PHY
Upstream PHY index: 1
Upstream SFP name: sfp-eth0
PHY for eth2:
PHY index: 1
Driver name: Marvell 88E1510
PHY device name: f212a200.mdio-mii:00
PHY id: 21040593
Upstream type: MAC
Ethtool patches : https://github.com/minimaxwell/ethtool/tree/link-topo-v6
Link to V10: https://lore.kernel.org/netdev/20240304151011.1610175-1-maxime.chevallier@bootlin.com/
Link to V9: https://lore.kernel.org/netdev/20240228114728.51861-1-maxime.chevallier@bootlin.com/
Link to V8: https://lore.kernel.org/netdev/20240220184217.3689988-1-maxime.chevallier@bootlin.com/
Link to V7: https://lore.kernel.org/netdev/20240213150431.1796171-1-maxime.chevallier@bootlin.com/
Link to V6: https://lore.kernel.org/netdev/20240126183851.2081418-1-maxime.chevallier@bootlin.com/
Link to V5: https://lore.kernel.org/netdev/20231221180047.1924733-1-maxime.chevallier@bootlin.com/
Link to V4: https://lore.kernel.org/netdev/20231215171237.1152563-1-maxime.chevallier@bootlin.com/
Link to V3: https://lore.kernel.org/netdev/20231201163704.1306431-1-maxime.chevallier@bootlin.com/
Link to V2: https://lore.kernel.org/netdev/20231117162323.626979-1-maxime.chevallier@bootlin.com/
Link to V1: https://lore.kernel.org/netdev/20230907092407.647139-1-maxime.chevallier@bootlin.com/
Maxime Chevallier (13):
net: phy: Introduce ethernet link topology representation
net: sfp: pass the phy_device when disconnecting an sfp module's PHY
net: phy: add helpers to handle sfp phy connect/disconnect
net: sfp: Add helper to return the SFP bus name
net: ethtool: Allow passing a phy index for some commands
netlink: specs: add phy-index as a header parameter
net: ethtool: Introduce a command to list PHYs on an interface
netlink: specs: add ethnl PHY_GET command set
net: ethtool: plca: Target the command to the requested PHY
net: ethtool: pse-pd: Target the command to the requested PHY
net: ethtool: cable-test: Target the command to the requested PHY
net: ethtool: strset: Allow querying phy stats by index
Documentation: networking: document phy_link_topology
Documentation/netlink/specs/ethtool.yaml | 62 ++++
Documentation/networking/ethtool-netlink.rst | 52 +++
Documentation/networking/index.rst | 1 +
.../networking/phy-link-topology.rst | 120 +++++++
MAINTAINERS | 2 +
drivers/net/phy/Makefile | 2 +-
drivers/net/phy/marvell-88x2222.c | 2 +
drivers/net/phy/marvell.c | 2 +
drivers/net/phy/marvell10g.c | 2 +
drivers/net/phy/phy_device.c | 55 ++++
drivers/net/phy/phy_link_topology.c | 105 ++++++
drivers/net/phy/phylink.c | 3 +-
drivers/net/phy/qcom/at803x.c | 2 +
drivers/net/phy/qcom/qca807x.c | 2 +
drivers/net/phy/sfp-bus.c | 15 +-
include/linux/netdevice.h | 4 +-
include/linux/phy.h | 6 +
include/linux/phy_link_topology.h | 72 +++++
include/linux/phy_link_topology_core.h | 25 ++
include/linux/sfp.h | 8 +-
include/uapi/linux/ethtool.h | 16 +
include/uapi/linux/ethtool_netlink.h | 21 ++
net/core/dev.c | 9 +
net/ethtool/Makefile | 2 +-
net/ethtool/cabletest.c | 16 +-
net/ethtool/netlink.c | 57 +++-
net/ethtool/netlink.h | 10 +
net/ethtool/phy.c | 300 ++++++++++++++++++
net/ethtool/plca.c | 19 +-
net/ethtool/pse-pd.c | 13 +-
net/ethtool/strset.c | 17 +-
31 files changed, 979 insertions(+), 43 deletions(-)
create mode 100644 Documentation/networking/phy-link-topology.rst
create mode 100644 drivers/net/phy/phy_link_topology.c
create mode 100644 include/linux/phy_link_topology.h
create mode 100644 include/linux/phy_link_topology_core.h
create mode 100644 net/ethtool/phy.c
--
2.44.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
thomas.petazzoni@bootlin.com, "Andrew Lunn" <andrew@lunn.ch>,
"Jakub Kicinski" <kuba@kernel.org>,
"Eric Dumazet" <edumazet@google.com>,
"Paolo Abeni" <pabeni@redhat.com>,
"Russell King" <linux@armlinux.org.uk>,
linux-arm-kernel@lists.infradead.org,
"Christophe Leroy" <christophe.leroy@csgroup.eu>,
"Herve Codina" <herve.codina@bootlin.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"Vladimir Oltean" <vladimir.oltean@nxp.com>,
"Köry Maincent" <kory.maincent@bootlin.com>,
"Jesse Brandeburg" <jesse.brandeburg@intel.com>,
"Jonathan Corbet" <corbet@lwn.net>,
"Marek Behún" <kabel@kernel.org>,
"Piergiorgio Beruto" <piergiorgio.beruto@gmail.com>,
"Oleksij Rempel" <o.rempel@pengutronix.de>,
"Nicolò Veronese" <nicveronese@gmail.com>,
"Simon Horman" <horms@kernel.org>,
mwojtas@chromium.org
Subject: [PATCH net-next v11 00/13] Introduce PHY listing and link_topology tracking
Date: Thu, 4 Apr 2024 11:29:50 +0200 [thread overview]
Message-ID: <20240404093004.2552221-1-maxime.chevallier@bootlin.com> (raw)
Hello everyone,
This is V11 for the link topology addition, allowing to track all PHYs
that are linked to netdevices.
This V11 addresses the various netlink-related issues that were raised
by Jakub, and fixes some typos in the documentation.
As a remainder, here's what the PHY listings would look like :
- eth0 has a 88x3310 acting as media converter, and an SFP module with
an embedded 88e1111 PHY
- eth2 has a 88e1510 PHY
# ethtool --show-phys *
PHY for eth0:
PHY index: 1
Driver name: mv88x3310
PHY device name: f212a600.mdio-mii:00
Downstream SFP bus name: sfp-eth0
PHY id: 0
Upstream type: MAC
PHY for eth0:
PHY index: 2
Driver name: Marvell 88E1111
PHY device name: i2c:sfp-eth0:16
PHY id: 21040322
Upstream type: PHY
Upstream PHY index: 1
Upstream SFP name: sfp-eth0
PHY for eth2:
PHY index: 1
Driver name: Marvell 88E1510
PHY device name: f212a200.mdio-mii:00
PHY id: 21040593
Upstream type: MAC
Ethtool patches : https://github.com/minimaxwell/ethtool/tree/link-topo-v6
Link to V10: https://lore.kernel.org/netdev/20240304151011.1610175-1-maxime.chevallier@bootlin.com/
Link to V9: https://lore.kernel.org/netdev/20240228114728.51861-1-maxime.chevallier@bootlin.com/
Link to V8: https://lore.kernel.org/netdev/20240220184217.3689988-1-maxime.chevallier@bootlin.com/
Link to V7: https://lore.kernel.org/netdev/20240213150431.1796171-1-maxime.chevallier@bootlin.com/
Link to V6: https://lore.kernel.org/netdev/20240126183851.2081418-1-maxime.chevallier@bootlin.com/
Link to V5: https://lore.kernel.org/netdev/20231221180047.1924733-1-maxime.chevallier@bootlin.com/
Link to V4: https://lore.kernel.org/netdev/20231215171237.1152563-1-maxime.chevallier@bootlin.com/
Link to V3: https://lore.kernel.org/netdev/20231201163704.1306431-1-maxime.chevallier@bootlin.com/
Link to V2: https://lore.kernel.org/netdev/20231117162323.626979-1-maxime.chevallier@bootlin.com/
Link to V1: https://lore.kernel.org/netdev/20230907092407.647139-1-maxime.chevallier@bootlin.com/
Maxime Chevallier (13):
net: phy: Introduce ethernet link topology representation
net: sfp: pass the phy_device when disconnecting an sfp module's PHY
net: phy: add helpers to handle sfp phy connect/disconnect
net: sfp: Add helper to return the SFP bus name
net: ethtool: Allow passing a phy index for some commands
netlink: specs: add phy-index as a header parameter
net: ethtool: Introduce a command to list PHYs on an interface
netlink: specs: add ethnl PHY_GET command set
net: ethtool: plca: Target the command to the requested PHY
net: ethtool: pse-pd: Target the command to the requested PHY
net: ethtool: cable-test: Target the command to the requested PHY
net: ethtool: strset: Allow querying phy stats by index
Documentation: networking: document phy_link_topology
Documentation/netlink/specs/ethtool.yaml | 62 ++++
Documentation/networking/ethtool-netlink.rst | 52 +++
Documentation/networking/index.rst | 1 +
.../networking/phy-link-topology.rst | 120 +++++++
MAINTAINERS | 2 +
drivers/net/phy/Makefile | 2 +-
drivers/net/phy/marvell-88x2222.c | 2 +
drivers/net/phy/marvell.c | 2 +
drivers/net/phy/marvell10g.c | 2 +
drivers/net/phy/phy_device.c | 55 ++++
drivers/net/phy/phy_link_topology.c | 105 ++++++
drivers/net/phy/phylink.c | 3 +-
drivers/net/phy/qcom/at803x.c | 2 +
drivers/net/phy/qcom/qca807x.c | 2 +
drivers/net/phy/sfp-bus.c | 15 +-
include/linux/netdevice.h | 4 +-
include/linux/phy.h | 6 +
include/linux/phy_link_topology.h | 72 +++++
include/linux/phy_link_topology_core.h | 25 ++
include/linux/sfp.h | 8 +-
include/uapi/linux/ethtool.h | 16 +
include/uapi/linux/ethtool_netlink.h | 21 ++
net/core/dev.c | 9 +
net/ethtool/Makefile | 2 +-
net/ethtool/cabletest.c | 16 +-
net/ethtool/netlink.c | 57 +++-
net/ethtool/netlink.h | 10 +
net/ethtool/phy.c | 300 ++++++++++++++++++
net/ethtool/plca.c | 19 +-
net/ethtool/pse-pd.c | 13 +-
net/ethtool/strset.c | 17 +-
31 files changed, 979 insertions(+), 43 deletions(-)
create mode 100644 Documentation/networking/phy-link-topology.rst
create mode 100644 drivers/net/phy/phy_link_topology.c
create mode 100644 include/linux/phy_link_topology.h
create mode 100644 include/linux/phy_link_topology_core.h
create mode 100644 net/ethtool/phy.c
--
2.44.0
next reply other threads:[~2024-04-04 9:30 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-04 9:29 Maxime Chevallier [this message]
2024-04-04 9:29 ` [PATCH net-next v11 00/13] Introduce PHY listing and link_topology tracking Maxime Chevallier
2024-04-04 9:29 ` [PATCH net-next v11 01/13] net: phy: Introduce ethernet link topology representation Maxime Chevallier
2024-04-04 9:29 ` Maxime Chevallier
2024-04-06 15:51 ` Andrew Lunn
2024-04-06 15:51 ` Andrew Lunn
2024-04-09 20:15 ` Nathan Chancellor
2024-04-09 20:15 ` Nathan Chancellor
2024-04-10 6:45 ` Maxime Chevallier
2024-04-10 6:45 ` Maxime Chevallier
2024-04-10 8:16 ` Maxime Chevallier
2024-04-10 8:16 ` Maxime Chevallier
2024-04-10 14:53 ` Nathan Chancellor
2024-04-11 9:25 ` Maxime Chevallier
2024-04-11 9:25 ` Maxime Chevallier
2024-04-04 9:29 ` [PATCH net-next v11 02/13] net: sfp: pass the phy_device when disconnecting an sfp module's PHY Maxime Chevallier
2024-04-04 9:29 ` Maxime Chevallier
2024-04-06 15:51 ` Andrew Lunn
2024-04-06 15:51 ` Andrew Lunn
2024-04-04 9:29 ` [PATCH net-next v11 03/13] net: phy: add helpers to handle sfp phy connect/disconnect Maxime Chevallier
2024-04-04 9:29 ` Maxime Chevallier
2024-04-06 15:52 ` Andrew Lunn
2024-04-06 15:52 ` Andrew Lunn
2024-04-04 9:29 ` [PATCH net-next v11 04/13] net: sfp: Add helper to return the SFP bus name Maxime Chevallier
2024-04-04 9:29 ` Maxime Chevallier
2024-04-04 9:29 ` [PATCH net-next v11 05/13] net: ethtool: Allow passing a phy index for some commands Maxime Chevallier
2024-04-04 9:29 ` Maxime Chevallier
2024-04-04 9:29 ` [PATCH net-next v11 06/13] netlink: specs: add phy-index as a header parameter Maxime Chevallier
2024-04-04 9:29 ` Maxime Chevallier
2024-04-04 9:29 ` [PATCH net-next v11 07/13] net: ethtool: Introduce a command to list PHYs on an interface Maxime Chevallier
2024-04-04 9:29 ` Maxime Chevallier
2024-04-06 15:58 ` Andrew Lunn
2024-04-06 15:58 ` Andrew Lunn
2024-04-04 9:29 ` [PATCH net-next v11 08/13] netlink: specs: add ethnl PHY_GET command set Maxime Chevallier
2024-04-04 9:29 ` Maxime Chevallier
2024-04-06 16:14 ` Andrew Lunn
2024-04-06 16:14 ` Andrew Lunn
2024-04-04 9:29 ` [PATCH net-next v11 09/13] net: ethtool: plca: Target the command to the requested PHY Maxime Chevallier
2024-04-04 9:29 ` Maxime Chevallier
2024-04-06 16:00 ` Andrew Lunn
2024-04-06 16:00 ` Andrew Lunn
2024-04-04 9:30 ` [PATCH net-next v11 10/13] net: ethtool: pse-pd: " Maxime Chevallier
2024-04-04 9:30 ` Maxime Chevallier
2024-04-06 16:00 ` Andrew Lunn
2024-04-06 16:00 ` Andrew Lunn
2024-04-04 9:30 ` [PATCH net-next v11 11/13] net: ethtool: cable-test: " Maxime Chevallier
2024-04-04 9:30 ` Maxime Chevallier
2024-04-06 16:00 ` Andrew Lunn
2024-04-06 16:00 ` Andrew Lunn
2024-04-04 9:30 ` [PATCH net-next v11 12/13] net: ethtool: strset: Allow querying phy stats by index Maxime Chevallier
2024-04-04 9:30 ` Maxime Chevallier
2024-04-06 16:01 ` Andrew Lunn
2024-04-06 16:01 ` Andrew Lunn
2024-04-04 9:30 ` [PATCH net-next v11 13/13] Documentation: networking: document phy_link_topology Maxime Chevallier
2024-04-04 9:30 ` Maxime Chevallier
2024-04-06 16:07 ` Andrew Lunn
2024-04-06 16:07 ` Andrew Lunn
2024-04-06 17:30 ` [PATCH net-next v11 00/13] Introduce PHY listing and link_topology tracking patchwork-bot+netdevbpf
2024-04-06 17:30 ` patchwork-bot+netdevbpf
2024-04-08 14:32 ` Maxime Chevallier
2024-04-08 14:32 ` Maxime Chevallier
2024-04-08 23:50 ` Andrew Lunn
2024-04-08 23:50 ` Andrew Lunn
2024-04-09 7:22 ` Maxime Chevallier
2024-04-09 7:22 ` Maxime Chevallier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240404093004.2552221-1-maxime.chevallier@bootlin.com \
--to=maxime.chevallier@bootlin.com \
--cc=andrew@lunn.ch \
--cc=christophe.leroy@csgroup.eu \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=herve.codina@bootlin.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=jesse.brandeburg@intel.com \
--cc=kabel@kernel.org \
--cc=kory.maincent@bootlin.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mwojtas@chromium.org \
--cc=netdev@vger.kernel.org \
--cc=nicveronese@gmail.com \
--cc=o.rempel@pengutronix.de \
--cc=pabeni@redhat.com \
--cc=piergiorgio.beruto@gmail.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.