From: Richard Fitzgerald <rf@opensource.cirrus.com>
To: <broonie@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <patches@opensource.cirrus.com>,
"Richard Fitzgerald" <rf@opensource.cirrus.com>
Subject: [PATCH 06/11] regmap: kunit: Add more cache-drop tests
Date: Mon, 8 Apr 2024 15:45:55 +0100 [thread overview]
Message-ID: <20240408144600.230848-7-rf@opensource.cirrus.com> (raw)
In-Reply-To: <20240408144600.230848-1-rf@opensource.cirrus.com>
Extend the testing of cache-drop.
- Added cache_drop_all_and_sync_marked_dirty(). If all registers are
dropped from the cache a regcache_mark_dirty() followed by
regcache_sync() should not write anything because the cache is empty.
- Added cache_drop_all_and_sync_no_defaults(). This is similar to
cache_drop_all_and_sync_marked_dirty() except that regcache_mark_dirty()
is NOT called. All registers were dropped so regcache_sync() should not
write anything.
- Added cache_drop_all_and_sync_has_defaults(). This is the same as
cache_drop_all_and_sync_no_defaults() except that the regmap has a
table of default values.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
drivers/base/regmap/regmap-kunit.c | 135 +++++++++++++++++++++++++++++
1 file changed, 135 insertions(+)
diff --git a/drivers/base/regmap/regmap-kunit.c b/drivers/base/regmap/regmap-kunit.c
index 873161b58de9..3201f5f6406b 100644
--- a/drivers/base/regmap/regmap-kunit.c
+++ b/drivers/base/regmap/regmap-kunit.c
@@ -920,6 +920,138 @@ static void cache_drop(struct kunit *test)
regmap_exit(map);
}
+static void cache_drop_all_and_sync_marked_dirty(struct kunit *test)
+{
+ const struct regmap_test_param *param = test->param_value;
+ struct regmap *map;
+ struct regmap_config config;
+ struct regmap_ram_data *data;
+ unsigned int rval[BLOCK_TEST_SIZE];
+ int i;
+
+ config = test_regmap_config;
+ config.num_reg_defaults = BLOCK_TEST_SIZE;
+
+ map = gen_regmap(test, &config, &data);
+ KUNIT_ASSERT_FALSE(test, IS_ERR(map));
+ if (IS_ERR(map))
+ return;
+
+ /* Ensure the data is read from the cache */
+ for (i = 0; i < BLOCK_TEST_SIZE; i++)
+ data->read[param->from_reg + i] = false;
+ KUNIT_EXPECT_EQ(test, 0, regmap_bulk_read(map, param->from_reg, rval,
+ BLOCK_TEST_SIZE));
+ KUNIT_EXPECT_MEMEQ(test, &data->vals[param->from_reg], rval, sizeof(rval));
+
+ /* Change all values in cache from defaults */
+ for (i = 0; i < BLOCK_TEST_SIZE; i++)
+ KUNIT_EXPECT_EQ(test, 0, regmap_write(map, param->from_reg + i, rval[i] + 1));
+
+ /* Drop all registers */
+ KUNIT_EXPECT_EQ(test, 0, regcache_drop_region(map, 0, config.max_register));
+
+ /* Mark dirty and cache sync should not write anything. */
+ regcache_mark_dirty(map);
+ for (i = 0; i < BLOCK_TEST_SIZE; i++)
+ data->written[param->from_reg + i] = false;
+
+ KUNIT_EXPECT_EQ(test, 0, regcache_sync(map));
+ for (i = 0; i <= config.max_register; i++)
+ KUNIT_EXPECT_FALSE(test, data->written[i]);
+
+ regmap_exit(map);
+}
+
+static void cache_drop_all_and_sync_no_defaults(struct kunit *test)
+{
+ const struct regmap_test_param *param = test->param_value;
+ struct regmap *map;
+ struct regmap_config config;
+ struct regmap_ram_data *data;
+ unsigned int rval[BLOCK_TEST_SIZE];
+ int i;
+
+ config = test_regmap_config;
+
+ map = gen_regmap(test, &config, &data);
+ KUNIT_ASSERT_FALSE(test, IS_ERR(map));
+ if (IS_ERR(map))
+ return;
+
+ /* Ensure the data is read from the cache */
+ for (i = 0; i < BLOCK_TEST_SIZE; i++)
+ data->read[param->from_reg + i] = false;
+ KUNIT_EXPECT_EQ(test, 0, regmap_bulk_read(map, param->from_reg, rval,
+ BLOCK_TEST_SIZE));
+ KUNIT_EXPECT_MEMEQ(test, &data->vals[param->from_reg], rval, sizeof(rval));
+
+ /* Change all values in cache */
+ for (i = 0; i < BLOCK_TEST_SIZE; i++)
+ KUNIT_EXPECT_EQ(test, 0, regmap_write(map, param->from_reg + i, rval[i] + 1));
+
+ /* Drop all registers */
+ KUNIT_EXPECT_EQ(test, 0, regcache_drop_region(map, 0, config.max_register));
+
+ /*
+ * Sync cache without marking it dirty. All registers were dropped
+ * so the cache should not have any entries to write out.
+ */
+ for (i = 0; i < BLOCK_TEST_SIZE; i++)
+ data->written[param->from_reg + i] = false;
+
+ KUNIT_EXPECT_EQ(test, 0, regcache_sync(map));
+ for (i = 0; i <= config.max_register; i++)
+ KUNIT_EXPECT_FALSE(test, data->written[i]);
+
+ regmap_exit(map);
+}
+
+static void cache_drop_all_and_sync_has_defaults(struct kunit *test)
+{
+ const struct regmap_test_param *param = test->param_value;
+ struct regmap *map;
+ struct regmap_config config;
+ struct regmap_ram_data *data;
+ unsigned int rval[BLOCK_TEST_SIZE];
+ int i;
+
+ config = test_regmap_config;
+ config.num_reg_defaults = BLOCK_TEST_SIZE;
+
+ map = gen_regmap(test, &config, &data);
+ KUNIT_ASSERT_FALSE(test, IS_ERR(map));
+ if (IS_ERR(map))
+ return;
+
+ /* Ensure the data is read from the cache */
+ for (i = 0; i < BLOCK_TEST_SIZE; i++)
+ data->read[param->from_reg + i] = false;
+ KUNIT_EXPECT_EQ(test, 0, regmap_bulk_read(map, param->from_reg, rval,
+ BLOCK_TEST_SIZE));
+ KUNIT_EXPECT_MEMEQ(test, &data->vals[param->from_reg], rval, sizeof(rval));
+
+ /* Change all values in cache from defaults */
+ for (i = 0; i < BLOCK_TEST_SIZE; i++)
+ KUNIT_EXPECT_EQ(test, 0, regmap_write(map, param->from_reg + i, rval[i] + 1));
+
+ /* Drop all registers */
+ KUNIT_EXPECT_EQ(test, 0, regcache_drop_region(map, 0, config.max_register));
+
+ /*
+ * Sync cache without marking it dirty. All registers were dropped
+ * so the cache should not have any entries to write out.
+ */
+ for (i = 0; i < BLOCK_TEST_SIZE; i++)
+ data->written[param->from_reg + i] = false;
+
+ KUNIT_EXPECT_EQ(test, 0, regcache_sync(map));
+ for (i = 0; i <= config.max_register; i++)
+ KUNIT_EXPECT_FALSE(test, data->written[i]);
+
+ regmap_exit(map);
+}
+
static void cache_present(struct kunit *test)
{
const struct regmap_test_param *param = test->param_value;
@@ -1463,6 +1595,9 @@ static struct kunit_case regmap_test_cases[] = {
KUNIT_CASE_PARAM(cache_sync_readonly, real_cache_types_gen_params),
KUNIT_CASE_PARAM(cache_sync_patch, real_cache_types_gen_params),
KUNIT_CASE_PARAM(cache_drop, sparse_cache_types_gen_params),
+ KUNIT_CASE_PARAM(cache_drop_all_and_sync_marked_dirty, sparse_cache_types_gen_params),
+ KUNIT_CASE_PARAM(cache_drop_all_and_sync_no_defaults, sparse_cache_types_gen_params),
+ KUNIT_CASE_PARAM(cache_drop_all_and_sync_has_defaults, sparse_cache_types_gen_params),
KUNIT_CASE_PARAM(cache_present, sparse_cache_types_gen_params),
KUNIT_CASE_PARAM(cache_range_window_reg, real_cache_types_only_gen_params),
--
2.39.2
next prev parent reply other threads:[~2024-04-08 14:46 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-08 14:45 [PATCH 00/11] regmap: kunit: Add some test cases and a few small improvements Richard Fitzgerald
2024-04-08 14:45 ` [PATCH 01/11] regmap: kunit: Fix warnings of implicit casts to __le16 and __be16 Richard Fitzgerald
2024-04-08 14:45 ` [PATCH 02/11] regmap: kunit: Create a struct device for the regmap Richard Fitzgerald
2024-04-08 14:45 ` [PATCH 03/11] regmap: kunit: Introduce struct for test case parameters Richard Fitzgerald
2024-04-08 14:45 ` [PATCH 04/11] regmap: kunit: Run sparse cache tests at non-zero register addresses Richard Fitzgerald
2024-05-16 19:53 ` Guenter Roeck
2024-05-17 11:28 ` Mark Brown
2024-05-17 15:19 ` Guenter Roeck
2024-05-17 11:58 ` Richard Fitzgerald
2024-05-17 13:10 ` Richard Fitzgerald
2024-05-17 15:44 ` Richard Fitzgerald
2024-05-17 15:57 ` Guenter Roeck
2024-04-08 14:45 ` [PATCH 05/11] regmap: kunit: Run non-sparse " Richard Fitzgerald
2024-04-08 14:45 ` Richard Fitzgerald [this message]
2024-04-08 14:45 ` [PATCH 07/11] regmap: kunit: Add more cache-sync tests Richard Fitzgerald
2024-04-08 14:45 ` [PATCH 08/11] regmap: kunit: Use a KUnit action to call regmap_exit() Richard Fitzgerald
2024-04-08 14:45 ` [PATCH 09/11] regmap: kunit: Replace a kmalloc/kfree() pair with KUnit-managed alloc Richard Fitzgerald
2024-04-08 14:45 ` [PATCH 10/11] regmap: kunit: Add cache-drop test with multiple cache blocks Richard Fitzgerald
2024-04-08 14:46 ` [PATCH 11/11] regmap: kunit: Add test cases for regmap_read_bypassed() Richard Fitzgerald
2024-04-09 23:34 ` [PATCH 00/11] regmap: kunit: Add some test cases and a few small improvements Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240408144600.230848-7-rf@opensource.cirrus.com \
--to=rf@opensource.cirrus.com \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.