[PATCH v5 0/3] Add sysfs entry to EDL mode

[PATCH v5 0/3] Add sysfs entry to EDL mode

[Qiang Yu]

Add EDL sysfs entry for mhi controller that provides edl_trigger callback.
Add mhi_pci_generic_edl_trigger for qualcomm sdx55,sdx65 and sdx75 as
edl_trigger callback.

v4->v5:
1. Add a blank line before the #endif in patch[2/3].

2. Add reviewed-by tag.

v3->v4:
1. Modify some comments, commit message and sysfs entry description.

2. Add error cleanups if get channel doorbell offset fail.

3. s/force_edl/trigger_edl

4. s/mhi_get_channel_doorbell/mhi_get_channel_doorbell_offset

5. Use mhi_get_channel_doorbell_offset in mhi_init_mmio()

v2->v3:
1. Update Documentation/ABI/stable/sysfs-bus-mhi with description of
   force_edl sysfs entry.

2. Add comments about edl_trigger callback in mhi_controller struct.

3. Follow reverse christmas tree in mhi_pci_generic_edl_trigger.

4. Add a new API in MHI to allow controller to get CHDB address and avoid
   duplicating the definition of CHDBOFF.

v1->v2:
1. Move all process needed by qualcomm sdx55,sdx65,sdx75 to enter EDL into
   mhi_pci_generic_edl_trigger() as the callback to edl_trigger.

2. MHI stack creates EDL sysfs entry to invoke edl_trigger callback so
   that devices need different mechanism to enter EDL can provide its own
   edl_trigger callabck.

Qiang Yu (3):
  bus: mhi: host: Add sysfs entry to force device to enter EDL
  bus: mhi: host: Add a new API for getting channel doorbell address
  bus: mhi: host: pci_generic: Add edl callback to enter EDL

 Documentation/ABI/stable/sysfs-bus-mhi | 13 ++++++++++
 drivers/bus/mhi/host/init.c            | 39 ++++++++++++++++++++++++++---
 drivers/bus/mhi/host/main.c            | 16 ++++++++++++
 drivers/bus/mhi/host/pci_generic.c     | 45 ++++++++++++++++++++++++++++++++++
 include/linux/mhi.h                    |  9 +++++++
 5 files changed, 118 insertions(+), 4 deletions(-)

-- 
2.7.4

[PATCH v5 1/3] bus: mhi: host: Add sysfs entry to force device to enter EDL

[Qiang Yu]

Add sysfs entry to allow users of MHI bus force device to enter EDL.
Considering that the way to enter EDL mode varies from device to device and
some devices even do not support EDL. Hence, add a callback edl_trigger in
mhi controller as part of the sysfs entry to be invoked and MHI core will
only create EDL sysfs entry for mhi controller that provides edl_trigger
callback. All of the process a specific device required to enter EDL mode
can be placed in this callback.

Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
---
 Documentation/ABI/stable/sysfs-bus-mhi | 13 +++++++++++++
 drivers/bus/mhi/host/init.c            | 33 +++++++++++++++++++++++++++++++++
 include/linux/mhi.h                    |  2 ++
 3 files changed, 48 insertions(+)

diff --git a/Documentation/ABI/stable/sysfs-bus-mhi b/Documentation/ABI/stable/sysfs-bus-mhi
index 1a47f9e..b44f467 100644
--- a/Documentation/ABI/stable/sysfs-bus-mhi
+++ b/Documentation/ABI/stable/sysfs-bus-mhi
@@ -29,3 +29,16 @@ Description:	Initiates a SoC reset on the MHI controller.  A SoC reset is
                 This can be useful as a method of recovery if the device is
                 non-responsive, or as a means of loading new firmware as a
                 system administration task.
+
+What:           /sys/bus/mhi/devices/.../trigger_edl
+Date:           April 2024
+KernelVersion:  6.9
+Contact:        mhi@lists.linux.dev
+Description:    Writing a non-zero value to this file will force devices to
+                enter EDL (Emergency Download) mode. This entry only exists for
+                devices capable of entering the EDL mode using the standard EDL
+                triggering mechanism defined in the MHI spec v1.2. Once in EDL
+                mode, the flash programmer image can be downloaded to the
+                device to enter the flash programmer execution environment.
+                This can be useful if user wants to use QDL (Qualcomm Download,
+                which is used to download firmware over EDL) to update firmware.
diff --git a/drivers/bus/mhi/host/init.c b/drivers/bus/mhi/host/init.c
index 44f9349..7104c18 100644
--- a/drivers/bus/mhi/host/init.c
+++ b/drivers/bus/mhi/host/init.c
@@ -127,6 +127,30 @@ static ssize_t soc_reset_store(struct device *dev,
 }
 static DEVICE_ATTR_WO(soc_reset);
 
+static ssize_t trigger_edl_store(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct mhi_device *mhi_dev = to_mhi_device(dev);
+	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret < 0)
+		return ret;
+
+	if (!val)
+		return -EINVAL;
+
+	ret = mhi_cntrl->edl_trigger(mhi_cntrl);
+	if (ret)
+		return ret;
+
+	return count;
+}
+static DEVICE_ATTR_WO(trigger_edl);
+
 static struct attribute *mhi_dev_attrs[] = {
 	&dev_attr_serial_number.attr,
 	&dev_attr_oem_pk_hash.attr,
@@ -1018,6 +1042,12 @@ int mhi_register_controller(struct mhi_controller *mhi_cntrl,
 	if (ret)
 		goto err_release_dev;
 
+	if (mhi_cntrl->edl_trigger) {
+		ret = sysfs_create_file(&mhi_dev->dev.kobj, &dev_attr_trigger_edl.attr);
+		if (ret)
+			goto err_release_dev;
+	}
+
 	mhi_cntrl->mhi_dev = mhi_dev;
 
 	mhi_create_debugfs(mhi_cntrl);
@@ -1051,6 +1081,9 @@ void mhi_unregister_controller(struct mhi_controller *mhi_cntrl)
 	mhi_deinit_free_irq(mhi_cntrl);
 	mhi_destroy_debugfs(mhi_cntrl);
 
+	if (mhi_cntrl->edl_trigger)
+		sysfs_remove_file(&mhi_dev->dev.kobj, &dev_attr_trigger_edl.attr);
+
 	destroy_workqueue(mhi_cntrl->hiprio_wq);
 	kfree(mhi_cntrl->mhi_cmd);
 	kfree(mhi_cntrl->mhi_event);
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index cde01e1..d968e1a 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -353,6 +353,7 @@ struct mhi_controller_config {
  * @read_reg: Read a MHI register via the physical link (required)
  * @write_reg: Write a MHI register via the physical link (required)
  * @reset: Controller specific reset function (optional)
+ * @edl_trigger: CB function to trigger EDL mode (optional)
  * @buffer_len: Bounce buffer length
  * @index: Index of the MHI controller instance
  * @bounce_buf: Use of bounce buffer
@@ -435,6 +436,7 @@ struct mhi_controller {
 	void (*write_reg)(struct mhi_controller *mhi_cntrl, void __iomem *addr,
 			  u32 val);
 	void (*reset)(struct mhi_controller *mhi_cntrl);
+	int (*edl_trigger)(struct mhi_controller *mhi_cntrl);
 
 	size_t buffer_len;
 	int index;
-- 
2.7.4

Re: [PATCH v5 1/3] bus: mhi: host: Add sysfs entry to force device to enter EDL

[Manivannan Sadhasivam]

On Wed, Apr 24, 2024 at 11:21:53AM +0800, Qiang Yu wrote:
> Add sysfs entry to allow users of MHI bus force device to enter EDL.
> Considering that the way to enter EDL mode varies from device to device and
> some devices even do not support EDL. Hence, add a callback edl_trigger in
> mhi controller as part of the sysfs entry to be invoked and MHI core will
> only create EDL sysfs entry for mhi controller that provides edl_trigger
> callback. All of the process a specific device required to enter EDL mode
> can be placed in this callback.
> 
> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>

All 3 patches are applied to mhi-next with my reported changes! Since you are
doing upstreaming for some time, you should know that the changelog _must_ be
present in the patches itself or in the cover letter.

- Mani

> ---
>  Documentation/ABI/stable/sysfs-bus-mhi | 13 +++++++++++++
>  drivers/bus/mhi/host/init.c            | 33 +++++++++++++++++++++++++++++++++
>  include/linux/mhi.h                    |  2 ++
>  3 files changed, 48 insertions(+)
> 
> diff --git a/Documentation/ABI/stable/sysfs-bus-mhi b/Documentation/ABI/stable/sysfs-bus-mhi
> index 1a47f9e..b44f467 100644
> --- a/Documentation/ABI/stable/sysfs-bus-mhi
> +++ b/Documentation/ABI/stable/sysfs-bus-mhi
> @@ -29,3 +29,16 @@ Description:	Initiates a SoC reset on the MHI controller.  A SoC reset is
>                  This can be useful as a method of recovery if the device is
>                  non-responsive, or as a means of loading new firmware as a
>                  system administration task.
> +
> +What:           /sys/bus/mhi/devices/.../trigger_edl
> +Date:           April 2024
> +KernelVersion:  6.9
> +Contact:        mhi@lists.linux.dev
> +Description:    Writing a non-zero value to this file will force devices to
> +                enter EDL (Emergency Download) mode. This entry only exists for
> +                devices capable of entering the EDL mode using the standard EDL
> +                triggering mechanism defined in the MHI spec v1.2. Once in EDL
> +                mode, the flash programmer image can be downloaded to the
> +                device to enter the flash programmer execution environment.
> +                This can be useful if user wants to use QDL (Qualcomm Download,
> +                which is used to download firmware over EDL) to update firmware.
> diff --git a/drivers/bus/mhi/host/init.c b/drivers/bus/mhi/host/init.c
> index 44f9349..7104c18 100644
> --- a/drivers/bus/mhi/host/init.c
> +++ b/drivers/bus/mhi/host/init.c
> @@ -127,6 +127,30 @@ static ssize_t soc_reset_store(struct device *dev,
>  }
>  static DEVICE_ATTR_WO(soc_reset);
>  
> +static ssize_t trigger_edl_store(struct device *dev,
> +			       struct device_attribute *attr,
> +			       const char *buf, size_t count)
> +{
> +	struct mhi_device *mhi_dev = to_mhi_device(dev);
> +	struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
> +	unsigned long val;
> +	int ret;
> +
> +	ret = kstrtoul(buf, 10, &val);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (!val)
> +		return -EINVAL;
> +
> +	ret = mhi_cntrl->edl_trigger(mhi_cntrl);
> +	if (ret)
> +		return ret;
> +
> +	return count;
> +}
> +static DEVICE_ATTR_WO(trigger_edl);
> +
>  static struct attribute *mhi_dev_attrs[] = {
>  	&dev_attr_serial_number.attr,
>  	&dev_attr_oem_pk_hash.attr,
> @@ -1018,6 +1042,12 @@ int mhi_register_controller(struct mhi_controller *mhi_cntrl,
>  	if (ret)
>  		goto err_release_dev;
>  
> +	if (mhi_cntrl->edl_trigger) {
> +		ret = sysfs_create_file(&mhi_dev->dev.kobj, &dev_attr_trigger_edl.attr);
> +		if (ret)
> +			goto err_release_dev;
> +	}
> +
>  	mhi_cntrl->mhi_dev = mhi_dev;
>  
>  	mhi_create_debugfs(mhi_cntrl);
> @@ -1051,6 +1081,9 @@ void mhi_unregister_controller(struct mhi_controller *mhi_cntrl)
>  	mhi_deinit_free_irq(mhi_cntrl);
>  	mhi_destroy_debugfs(mhi_cntrl);
>  
> +	if (mhi_cntrl->edl_trigger)
> +		sysfs_remove_file(&mhi_dev->dev.kobj, &dev_attr_trigger_edl.attr);
> +
>  	destroy_workqueue(mhi_cntrl->hiprio_wq);
>  	kfree(mhi_cntrl->mhi_cmd);
>  	kfree(mhi_cntrl->mhi_event);
> diff --git a/include/linux/mhi.h b/include/linux/mhi.h
> index cde01e1..d968e1a 100644
> --- a/include/linux/mhi.h
> +++ b/include/linux/mhi.h
> @@ -353,6 +353,7 @@ struct mhi_controller_config {
>   * @read_reg: Read a MHI register via the physical link (required)
>   * @write_reg: Write a MHI register via the physical link (required)
>   * @reset: Controller specific reset function (optional)
> + * @edl_trigger: CB function to trigger EDL mode (optional)
>   * @buffer_len: Bounce buffer length
>   * @index: Index of the MHI controller instance
>   * @bounce_buf: Use of bounce buffer
> @@ -435,6 +436,7 @@ struct mhi_controller {
>  	void (*write_reg)(struct mhi_controller *mhi_cntrl, void __iomem *addr,
>  			  u32 val);
>  	void (*reset)(struct mhi_controller *mhi_cntrl);
> +	int (*edl_trigger)(struct mhi_controller *mhi_cntrl);
>  
>  	size_t buffer_len;
>  	int index;
> -- 
> 2.7.4
> 
> 

-- 
மணிவண்ணன் சதாசிவம்

Re: [PATCH v5 1/3] bus: mhi: host: Add sysfs entry to force device to enter EDL

[Jeffrey Hugo]

On 4/25/2024 8:54 AM, Manivannan Sadhasivam wrote:
> On Wed, Apr 24, 2024 at 11:21:53AM +0800, Qiang Yu wrote:
>> Add sysfs entry to allow users of MHI bus force device to enter EDL.
>> Considering that the way to enter EDL mode varies from device to device and
>> some devices even do not support EDL. Hence, add a callback edl_trigger in
>> mhi controller as part of the sysfs entry to be invoked and MHI core will
>> only create EDL sysfs entry for mhi controller that provides edl_trigger
>> callback. All of the process a specific device required to enter EDL mode
>> can be placed in this callback.
>>
>> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
>> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
> 
> All 3 patches are applied to mhi-next with my reported changes! Since you are
> doing upstreaming for some time, you should know that the changelog _must_ be
> present in the patches itself or in the cover letter.

It is/was in the cover letter.  Was the format not to your liking?

-Jeff

Re: [PATCH v5 1/3] bus: mhi: host: Add sysfs entry to force device to enter EDL

[Manivannan Sadhasivam]

On Thu, Apr 25, 2024 at 09:07:37AM -0600, Jeffrey Hugo wrote:
> On 4/25/2024 8:54 AM, Manivannan Sadhasivam wrote:
> > On Wed, Apr 24, 2024 at 11:21:53AM +0800, Qiang Yu wrote:
> > > Add sysfs entry to allow users of MHI bus force device to enter EDL.
> > > Considering that the way to enter EDL mode varies from device to device and
> > > some devices even do not support EDL. Hence, add a callback edl_trigger in
> > > mhi controller as part of the sysfs entry to be invoked and MHI core will
> > > only create EDL sysfs entry for mhi controller that provides edl_trigger
> > > callback. All of the process a specific device required to enter EDL mode
> > > can be placed in this callback.
> > > 
> > > Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
> > > Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
> > 
> > All 3 patches are applied to mhi-next with my reported changes! Since you are
> > doing upstreaming for some time, you should know that the changelog _must_ be
> > present in the patches itself or in the cover letter.
> 
> It is/was in the cover letter.  Was the format not to your liking?
> 

Hmm, it didn't land in my inbox. Maybe my filter did something. Apologies for
the false statement.

- Mani

-- 
மணிவண்ணன் சதாசிவம்

[PATCH v5 2/3] bus: mhi: host: Add a new API for getting channel doorbell address

[Qiang Yu]

Some controllers may want to know the address of a certain doorbell. Hence
add a new API where we read CHDBOFF register to get the base address of
doorbell, so that the controller can calculate the address of the doorbell
it wants by adding additional offset.

Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
---
 drivers/bus/mhi/host/init.c |  6 ++----
 drivers/bus/mhi/host/main.c | 16 ++++++++++++++++
 include/linux/mhi.h         |  7 +++++++
 3 files changed, 25 insertions(+), 4 deletions(-)

diff --git a/drivers/bus/mhi/host/init.c b/drivers/bus/mhi/host/init.c
index 7104c18..6e0fa79 100644
--- a/drivers/bus/mhi/host/init.c
+++ b/drivers/bus/mhi/host/init.c
@@ -541,11 +541,9 @@ int mhi_init_mmio(struct mhi_controller *mhi_cntrl)
 	dev_dbg(dev, "Initializing MHI registers\n");
 
 	/* Read channel db offset */
-	ret = mhi_read_reg(mhi_cntrl, base, CHDBOFF, &val);
-	if (ret) {
-		dev_err(dev, "Unable to read CHDBOFF register\n");
+	ret = mhi_get_channel_doorbell_offset(mhi_cntrl, &val);
+	if (ret)
 		return -EIO;
-	}
 
 	if (val >= mhi_cntrl->reg_len - (8 * MHI_DEV_WAKE_DB)) {
 		dev_err(dev, "CHDB offset: 0x%x is out of range: 0x%zx\n",
diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
index 15d657a..4de7567 100644
--- a/drivers/bus/mhi/host/main.c
+++ b/drivers/bus/mhi/host/main.c
@@ -1691,3 +1691,19 @@ void mhi_unprepare_from_transfer(struct mhi_device *mhi_dev)
 	}
 }
 EXPORT_SYMBOL_GPL(mhi_unprepare_from_transfer);
+
+int mhi_get_channel_doorbell_offset(struct mhi_controller *mhi_cntrl, u32 *chdb_offset)
+{
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	void __iomem *base = mhi_cntrl->regs;
+	int ret;
+
+	ret = mhi_read_reg(mhi_cntrl, base, CHDBOFF, chdb_offset);
+	if (ret) {
+		dev_err(dev, "Unable to read CHDBOFF register\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mhi_get_channel_doorbell_offset);
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index d968e1a..2cf1b3a 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -816,4 +816,11 @@ int mhi_queue_skb(struct mhi_device *mhi_dev, enum dma_data_direction dir,
  */
 bool mhi_queue_is_full(struct mhi_device *mhi_dev, enum dma_data_direction dir);
 
+/**
+ * mhi_get_channel_doorbell_offset - Get the channel doorbell offset
+ * @mhi_cntrl: MHI controller
+ * @chdb_offset: Channel doorbell offset
+ */
+int mhi_get_channel_doorbell_offset(struct mhi_controller *mhi_cntrl, u32 *chdb_offset);
+
 #endif /* _MHI_H_ */
-- 
2.7.4

[PATCH v5 3/3] bus: mhi: host: pci_generic: Add edl callback to enter EDL

[Qiang Yu]

Some of the MHI modems like SDX65 based ones are capable of entering the EDL
mode as per the standard triggering mechanism defined in the MHI spec v1.2. So
let's add a common mhi_pci_generic_edl_trigger() function that triggers the EDL
mode in the device when user writes to the /sys/bus/mhi/devices/.../trigger_edl
file.

Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
---
 drivers/bus/mhi/host/pci_generic.c | 45 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index 51639bf..c65eaa8 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -27,12 +27,16 @@
 #define PCI_VENDOR_ID_THALES	0x1269
 #define PCI_VENDOR_ID_QUECTEL	0x1eac
 
+#define MHI_EDL_DB			91
+#define MHI_EDL_COOKIE			0xEDEDEDED
+
 /**
  * struct mhi_pci_dev_info - MHI PCI device specific information
  * @config: MHI controller configuration
  * @name: name of the PCI module
  * @fw: firmware path (if any)
  * @edl: emergency download mode firmware path (if any)
+ * @edl_trigger: capable of triggering EDL mode in the device (if supported)
  * @bar_num: PCI base address register to use for MHI MMIO register space
  * @dma_data_width: DMA transfer word size (32 or 64 bits)
  * @mru_default: default MRU size for MBIM network packets
@@ -44,6 +48,7 @@ struct mhi_pci_dev_info {
 	const char *name;
 	const char *fw;
 	const char *edl;
+	bool edl_trigger;
 	unsigned int bar_num;
 	unsigned int dma_data_width;
 	unsigned int mru_default;
@@ -292,6 +297,7 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx75_info = {
 	.name = "qcom-sdx75m",
 	.fw = "qcom/sdx75m/xbl.elf",
 	.edl = "qcom/sdx75m/edl.mbn",
+	.edl_trigger = true,
 	.config = &modem_qcom_v2_mhiv_config,
 	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
 	.dma_data_width = 32,
@@ -302,6 +308,7 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx65_info = {
 	.name = "qcom-sdx65m",
 	.fw = "qcom/sdx65m/xbl.elf",
 	.edl = "qcom/sdx65m/edl.mbn",
+	.edl_trigger = true,
 	.config = &modem_qcom_v1_mhiv_config,
 	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
 	.dma_data_width = 32,
@@ -312,6 +319,7 @@ static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = {
 	.name = "qcom-sdx55m",
 	.fw = "qcom/sdx55m/sbl1.mbn",
 	.edl = "qcom/sdx55m/edl.mbn",
+	.edl_trigger = true,
 	.config = &modem_qcom_v1_mhiv_config,
 	.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
 	.dma_data_width = 32,
@@ -928,6 +936,40 @@ static void health_check(struct timer_list *t)
 	mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
 }
 
+static int mhi_pci_generic_edl_trigger(struct mhi_controller *mhi_cntrl)
+{
+	void __iomem *base = mhi_cntrl->regs;
+	void __iomem *edl_db;
+	int ret = 0;
+	u32 val;
+
+	ret = mhi_device_get_sync(mhi_cntrl->mhi_dev);
+	if (ret) {
+		dev_err(mhi_cntrl->cntrl_dev, "Failed to wakeup the device\n");
+		return ret;
+	}
+
+	pm_wakeup_event(&mhi_cntrl->mhi_dev->dev, 0);
+	mhi_cntrl->runtime_get(mhi_cntrl);
+
+	ret = mhi_get_channel_doorbell_offset(mhi_cntrl, &val);
+	if (ret)
+		goto err_get_chdb;
+
+	edl_db = base + val + (8 * MHI_EDL_DB);
+
+	mhi_cntrl->write_reg(mhi_cntrl, edl_db + 4, upper_32_bits(MHI_EDL_COOKIE));
+	mhi_cntrl->write_reg(mhi_cntrl, edl_db, lower_32_bits(MHI_EDL_COOKIE));
+
+	mhi_soc_reset(mhi_cntrl);
+
+err_get_chdb:
+	mhi_cntrl->runtime_put(mhi_cntrl);
+	mhi_device_put(mhi_cntrl->mhi_dev);
+
+	return ret;
+}
+
 static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	const struct mhi_pci_dev_info *info = (struct mhi_pci_dev_info *) id->driver_data;
@@ -962,6 +1004,9 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	mhi_cntrl->runtime_put = mhi_pci_runtime_put;
 	mhi_cntrl->mru = info->mru_default;
 
+	if (info->edl_trigger)
+		mhi_cntrl->edl_trigger = mhi_pci_generic_edl_trigger;
+
 	if (info->sideband_wake) {
 		mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
 		mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
-- 
2.7.4