From: Alex Bee <knaerzche@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
Alex Bee <knaerzche@gmail.com>
Subject: [PATCH 1/2] ARM: dts: rockchip: Add i2s nodes for RK3128
Date: Mon, 6 May 2024 17:51:02 +0200 [thread overview]
Message-ID: <20240506155103.206592-2-knaerzche@gmail.com> (raw)
In-Reply-To: <20240506155103.206592-1-knaerzche@gmail.com>
RK3128 SoCs have two i2s controllers. i2s_8ch has 8 tx and 2 rx channels
and is internally hard-wired to the hdmi-controller respectivly the SoC's
analog codec. i2s_2ch has 2 tx and 2 rx channels and can also be used
externally as it's pins are exposed though pinctrl.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
arch/arm/boot/dts/rockchip/rk3128.dtsi | 27 ++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
index fb98873fd94e..d0d1d7c2ab2f 100644
--- a/arch/arm/boot/dts/rockchip/rk3128.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -360,6 +360,18 @@ usb_host_ohci: usb@101e0000 {
status = "disabled";
};
+ i2s_8ch: i2s@10200000 {
+ compatible = "rockchip,rk3128-i2s", "rockchip,rk3066-i2s";
+ reg = <0x10200000 0x1000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S_8CH>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ dmas = <&pdma 14>, <&pdma 15>;
+ dma-names = "tx", "rx";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
sdmmc: mmc@10214000 {
compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x10214000 0x4000>;
@@ -408,6 +420,21 @@ emmc: mmc@1021c000 {
status = "disabled";
};
+ i2s_2ch: i2s@10220000 {
+ compatible = "rockchip,rk3128-i2s", "rockchip,rk3066-i2s";
+ reg = <0x10220000 0x1000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S_2CH>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ dmas = <&pdma 0>, <&pdma 1>;
+ dma-names = "tx", "rx";
+ rockchip,playback-channels = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_bus>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
nfc: nand-controller@10500000 {
compatible = "rockchip,rk3128-nfc", "rockchip,rk2928-nfc";
reg = <0x10500000 0x4000>;
--
2.43.2
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Alex Bee <knaerzche@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
Alex Bee <knaerzche@gmail.com>
Subject: [PATCH 1/2] ARM: dts: rockchip: Add i2s nodes for RK3128
Date: Mon, 6 May 2024 17:51:02 +0200 [thread overview]
Message-ID: <20240506155103.206592-2-knaerzche@gmail.com> (raw)
In-Reply-To: <20240506155103.206592-1-knaerzche@gmail.com>
RK3128 SoCs have two i2s controllers. i2s_8ch has 8 tx and 2 rx channels
and is internally hard-wired to the hdmi-controller respectivly the SoC's
analog codec. i2s_2ch has 2 tx and 2 rx channels and can also be used
externally as it's pins are exposed though pinctrl.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
arch/arm/boot/dts/rockchip/rk3128.dtsi | 27 ++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
index fb98873fd94e..d0d1d7c2ab2f 100644
--- a/arch/arm/boot/dts/rockchip/rk3128.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -360,6 +360,18 @@ usb_host_ohci: usb@101e0000 {
status = "disabled";
};
+ i2s_8ch: i2s@10200000 {
+ compatible = "rockchip,rk3128-i2s", "rockchip,rk3066-i2s";
+ reg = <0x10200000 0x1000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S_8CH>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ dmas = <&pdma 14>, <&pdma 15>;
+ dma-names = "tx", "rx";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
sdmmc: mmc@10214000 {
compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x10214000 0x4000>;
@@ -408,6 +420,21 @@ emmc: mmc@1021c000 {
status = "disabled";
};
+ i2s_2ch: i2s@10220000 {
+ compatible = "rockchip,rk3128-i2s", "rockchip,rk3066-i2s";
+ reg = <0x10220000 0x1000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S_2CH>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ dmas = <&pdma 0>, <&pdma 1>;
+ dma-names = "tx", "rx";
+ rockchip,playback-channels = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_bus>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
nfc: nand-controller@10500000 {
compatible = "rockchip,rk3128-nfc", "rockchip,rk2928-nfc";
reg = <0x10500000 0x4000>;
--
2.43.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Alex Bee <knaerzche@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
Alex Bee <knaerzche@gmail.com>
Subject: [PATCH 1/2] ARM: dts: rockchip: Add i2s nodes for RK3128
Date: Mon, 6 May 2024 17:51:02 +0200 [thread overview]
Message-ID: <20240506155103.206592-2-knaerzche@gmail.com> (raw)
In-Reply-To: <20240506155103.206592-1-knaerzche@gmail.com>
RK3128 SoCs have two i2s controllers. i2s_8ch has 8 tx and 2 rx channels
and is internally hard-wired to the hdmi-controller respectivly the SoC's
analog codec. i2s_2ch has 2 tx and 2 rx channels and can also be used
externally as it's pins are exposed though pinctrl.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
arch/arm/boot/dts/rockchip/rk3128.dtsi | 27 ++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
index fb98873fd94e..d0d1d7c2ab2f 100644
--- a/arch/arm/boot/dts/rockchip/rk3128.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -360,6 +360,18 @@ usb_host_ohci: usb@101e0000 {
status = "disabled";
};
+ i2s_8ch: i2s@10200000 {
+ compatible = "rockchip,rk3128-i2s", "rockchip,rk3066-i2s";
+ reg = <0x10200000 0x1000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S_8CH>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ dmas = <&pdma 14>, <&pdma 15>;
+ dma-names = "tx", "rx";
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
sdmmc: mmc@10214000 {
compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x10214000 0x4000>;
@@ -408,6 +420,21 @@ emmc: mmc@1021c000 {
status = "disabled";
};
+ i2s_2ch: i2s@10220000 {
+ compatible = "rockchip,rk3128-i2s", "rockchip,rk3066-i2s";
+ reg = <0x10220000 0x1000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S_2CH>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ dmas = <&pdma 0>, <&pdma 1>;
+ dma-names = "tx", "rx";
+ rockchip,playback-channels = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_bus>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
nfc: nand-controller@10500000 {
compatible = "rockchip,rk3128-nfc", "rockchip,rk2928-nfc";
reg = <0x10500000 0x4000>;
--
2.43.2
next prev parent reply other threads:[~2024-05-06 15:51 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-06 15:51 [PATCH 0/2] Add RK3128's sound nodes Alex Bee
2024-05-06 15:51 ` Alex Bee
2024-05-06 15:51 ` Alex Bee
2024-05-06 15:51 ` Alex Bee [this message]
2024-05-06 15:51 ` [PATCH 1/2] ARM: dts: rockchip: Add i2s nodes for RK3128 Alex Bee
2024-05-06 15:51 ` Alex Bee
2024-05-06 15:51 ` [PATCH 2/2] ARM: dts: rockchip: Add spdif node " Alex Bee
2024-05-06 15:51 ` Alex Bee
2024-05-06 15:51 ` Alex Bee
2024-06-08 15:17 ` [PATCH 0/2] Add RK3128's sound nodes Heiko Stuebner
2024-06-08 15:17 ` Heiko Stuebner
2024-06-08 15:17 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240506155103.206592-2-knaerzche@gmail.com \
--to=knaerzche@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.