Re: [PATCH v2 06/11] media: adv748x-csi2: Validate the image format

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Jacopo,

Thank you for the patch.

On Mon, May 06, 2024 at 06:49:34PM +0200, Jacopo Mondi wrote:
> The adv748x-csi2 driver configures the CSI-2 transmitter to
> automatically infer the image stream format from the connected
> frontend (HDMI or AFE).
> 
> Setting a new format on the subdevice hence does not actually control
> the CSI-2 output format, but it's only there for the purpose of
> pipeline validation.
> 
> However, there is currently no validation that the supplied media bus
> code is valid and supported by the device.
> 
> With the introduction of enum_mbus_codes a list of supported format is
> now available, use it to validate that the supplied format is correct
> and use the default UYVY8 one if that's not the case.
> 
> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
> ---
>  drivers/media/i2c/adv748x/adv748x-csi2.c | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> index 4fd6d3a681d5..3f22dc426d7a 100644
> --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> @@ -208,6 +208,23 @@ static int adv748x_csi2_get_format(struct v4l2_subdev *sd,
>  	return 0;
>  }
>  
> +static bool adv748x_csi2_is_fmt_supported(struct adv748x_csi2 *tx,
> +					  unsigned int code)

u32 code to match the data type from the format structure.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +{
> +	const unsigned int *codes = is_txa(tx) ?
> +				    adv748x_csi2_txa_fmts :
> +				    adv748x_csi2_txb_fmts;
> +	size_t num_fmts = is_txa(tx) ? ARRAY_SIZE(adv748x_csi2_txa_fmts)
> +				     : ARRAY_SIZE(adv748x_csi2_txb_fmts);
> +
> +	for (unsigned int i = 0; i < num_fmts; i++) {
> +		if (codes[i] == code)
> +			return true;
> +	}
> +
> +	return false;
> +}
> +
>  static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
>  				   struct v4l2_subdev_state *sd_state,
>  				   struct v4l2_subdev_format *sdformat)
> @@ -217,6 +234,13 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
>  	struct v4l2_mbus_framefmt *mbusformat;
>  	int ret = 0;
>  
> +	/*
> +	 * Make sure the format is supported, if not default it to
> +	 * UYVY8 as it's supported by both TXes.
> +	 */
> +	if (!adv748x_csi2_is_fmt_supported(tx, sdformat->format.code))
> +		sdformat->format.code = MEDIA_BUS_FMT_UYVY8_1X16;
> +
>  	mbusformat = adv748x_csi2_get_pad_format(sd, sd_state, sdformat->pad,
>  						 sdformat->which);
>  	if (!mbusformat)

-- 
Regards,

Laurent Pinchart