All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Cc: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
	"Sakari Ailus" <sakari.ailus@linux.intel.com>,
	"Kieran Bingham" <kieran.bingham+renesas@ideasonboard.com>,
	"Tomi Valkeinen" <tomi.valkeinen@ideasonboard.com>,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH v2 07/11] media: adv748x-csi2: Use the subdev active state
Date: Thu, 9 May 2024 15:45:44 +0300	[thread overview]
Message-ID: <20240509124544.GD17123@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20240506164941.110389-8-jacopo.mondi@ideasonboard.com>

Hi Jacopo,

Thank you for the patch.

On Mon, May 06, 2024 at 06:49:35PM +0200, Jacopo Mondi wrote:
> Initialize and use the subdev active state to store the subdevice
> format.
> 
> This simplifies the implementation of the get_fmt and set_fmt pad
> operations.
> 
> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/media/i2c/adv748x/adv748x-csi2.c | 107 +++++++++--------------
>  drivers/media/i2c/adv748x/adv748x.h      |   1 -
>  2 files changed, 42 insertions(+), 66 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> index 3f22dc426d7a..76b5eefdc2a7 100644
> --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> @@ -6,7 +6,6 @@
>   */
>  
>  #include <linux/module.h>
> -#include <linux/mutex.h>
>  
>  #include <media/v4l2-ctrls.h>
>  #include <media/v4l2-device.h>
> @@ -71,7 +70,33 @@ static int adv748x_csi2_register_link(struct adv748x_csi2 *tx,
>  
>  /* -----------------------------------------------------------------------------
>   * v4l2_subdev_internal_ops
> - *
> + */
> +
> +static int adv748x_csi2_init_state(struct v4l2_subdev *sd,
> +				   struct v4l2_subdev_state *state)
> +{
> +	static const struct v4l2_mbus_framefmt adv748x_csi2_default_fmt = {
> +		.width		= 1280,
> +		.height		= 720,
> +		.code		= MEDIA_BUS_FMT_UYVY8_1X16,
> +		.colorspace	= V4L2_COLORSPACE_SRGB,
> +		.field		= V4L2_FIELD_NONE,
> +		.ycbcr_enc	= V4L2_YCBCR_ENC_DEFAULT,
> +		.quantization	= V4L2_QUANTIZATION_DEFAULT,
> +		.xfer_func	= V4L2_XFER_FUNC_DEFAULT,
> +	};
> +	struct v4l2_mbus_framefmt *fmt;
> +
> +	fmt = v4l2_subdev_state_get_format(state, ADV748X_CSI2_SINK);
> +	*fmt = adv748x_csi2_default_fmt;
> +
> +	fmt = v4l2_subdev_state_get_format(state, ADV748X_CSI2_SOURCE);
> +	*fmt = adv748x_csi2_default_fmt;
> +
> +	return 0;
> +}
> +
> +/*
>   * We use the internal registered operation to be able to ensure that our
>   * incremental subdevices (not connected in the forward path) can be registered
>   * against the resulting video path and media device.
> @@ -121,6 +146,7 @@ static int adv748x_csi2_registered(struct v4l2_subdev *sd)
>  }
>  
>  static const struct v4l2_subdev_internal_ops adv748x_csi2_internal_ops = {
> +	.init_state = adv748x_csi2_init_state,
>  	.registered = adv748x_csi2_registered,
>  };
>  
> @@ -173,41 +199,6 @@ static int adv748x_csi2_enum_mbus_code(struct v4l2_subdev *sd,
>  	return 0;
>  }
>  
> -static struct v4l2_mbus_framefmt *
> -adv748x_csi2_get_pad_format(struct v4l2_subdev *sd,
> -			    struct v4l2_subdev_state *sd_state,
> -			    unsigned int pad, u32 which)
> -{
> -	struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
> -
> -	if (which == V4L2_SUBDEV_FORMAT_TRY)
> -		return v4l2_subdev_state_get_format(sd_state, pad);
> -
> -	return &tx->format;
> -}
> -
> -static int adv748x_csi2_get_format(struct v4l2_subdev *sd,
> -				   struct v4l2_subdev_state *sd_state,
> -				   struct v4l2_subdev_format *sdformat)
> -{
> -	struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
> -	struct adv748x_state *state = tx->state;
> -	struct v4l2_mbus_framefmt *mbusformat;
> -
> -	mbusformat = adv748x_csi2_get_pad_format(sd, sd_state, sdformat->pad,
> -						 sdformat->which);
> -	if (!mbusformat)
> -		return -EINVAL;
> -
> -	mutex_lock(&state->mutex);
> -
> -	sdformat->format = *mbusformat;
> -
> -	mutex_unlock(&state->mutex);
> -
> -	return 0;
> -}
> -
>  static bool adv748x_csi2_is_fmt_supported(struct adv748x_csi2 *tx,
>  					  unsigned int code)
>  {
> @@ -230,9 +221,10 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
>  				   struct v4l2_subdev_format *sdformat)
>  {
>  	struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
> -	struct adv748x_state *state = tx->state;
>  	struct v4l2_mbus_framefmt *mbusformat;
> -	int ret = 0;
> +
> +	if (sdformat->pad == ADV748X_CSI2_SOURCE)
> +		return v4l2_subdev_get_fmt(sd, sd_state, sdformat);
>  
>  	/*
>  	 * Make sure the format is supported, if not default it to
> @@ -241,34 +233,14 @@ static int adv748x_csi2_set_format(struct v4l2_subdev *sd,
>  	if (!adv748x_csi2_is_fmt_supported(tx, sdformat->format.code))
>  		sdformat->format.code = MEDIA_BUS_FMT_UYVY8_1X16;
>  
> -	mbusformat = adv748x_csi2_get_pad_format(sd, sd_state, sdformat->pad,
> -						 sdformat->which);
> -	if (!mbusformat)
> -		return -EINVAL;
> -
> -	mutex_lock(&state->mutex);
> -
> -	if (sdformat->pad == ADV748X_CSI2_SOURCE) {
> -		const struct v4l2_mbus_framefmt *sink_fmt;
> -
> -		sink_fmt = adv748x_csi2_get_pad_format(sd, sd_state,
> -						       ADV748X_CSI2_SINK,
> -						       sdformat->which);
> -
> -		if (!sink_fmt) {
> -			ret = -EINVAL;
> -			goto unlock;
> -		}
> -
> -		sdformat->format = *sink_fmt;
> -	}
> -
> +	mbusformat = v4l2_subdev_state_get_format(sd_state, sdformat->pad);
>  	*mbusformat = sdformat->format;
>  
> -unlock:
> -	mutex_unlock(&state->mutex);
> +	/* Propagate format to the source pad. */
> +	mbusformat = v4l2_subdev_state_get_format(sd_state, ADV748X_CSI2_SOURCE);
> +	*mbusformat = sdformat->format;
>  
> -	return ret;
> +	return 0;
>  }
>  
>  static int adv748x_csi2_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad,
> @@ -287,7 +259,7 @@ static int adv748x_csi2_get_mbus_config(struct v4l2_subdev *sd, unsigned int pad
>  
>  static const struct v4l2_subdev_pad_ops adv748x_csi2_pad_ops = {
>  	.enum_mbus_code = adv748x_csi2_enum_mbus_code,
> -	.get_fmt = adv748x_csi2_get_format,
> +	.get_fmt = v4l2_subdev_get_fmt,
>  	.set_fmt = adv748x_csi2_set_format,
>  	.get_mbus_config = adv748x_csi2_get_mbus_config,
>  };
> @@ -379,6 +351,11 @@ int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx)
>  	if (ret)
>  		goto err_cleanup_subdev;
>  
> +	tx->sd.state_lock = &state->mutex;
> +	ret = v4l2_subdev_init_finalize(&tx->sd);
> +	if (ret)
> +		goto err_free_ctrl;
> +
>  	ret = v4l2_async_register_subdev(&tx->sd);
>  	if (ret)
>  		goto err_free_ctrl;
> diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
> index d2b5e722e997..9bc0121d0eff 100644
> --- a/drivers/media/i2c/adv748x/adv748x.h
> +++ b/drivers/media/i2c/adv748x/adv748x.h
> @@ -75,7 +75,6 @@ enum adv748x_csi2_pads {
>  
>  struct adv748x_csi2 {
>  	struct adv748x_state *state;
> -	struct v4l2_mbus_framefmt format;
>  	unsigned int page;
>  	unsigned int port;
>  	unsigned int num_lanes;

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2024-05-09 12:45 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-06 16:49 [PATCH v2 00/11] media: renesas: rcar-csi2: Use the subdev active state Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 01/11] media: rcar-vin: Fix YUYV8_1X16 handling for CSI-2 Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 02/11] media: rcar-csi2: Disable runtime_pm in probe error Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 03/11] media: rcar-csi2: Cleanup subdevice in remove() Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 04/11] media: rcar-csi2: Use the subdev active state Jacopo Mondi
2024-05-08 16:18   ` Niklas Söderlund
2024-05-09  7:25     ` Jacopo Mondi
2024-05-09 11:06   ` [PATCH v2.1 " Jacopo Mondi
2024-05-09 11:24     ` Niklas Söderlund
2024-05-09 11:32       ` Jacopo Mondi
2024-05-09 12:14   ` [PATCH v2.2 " Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 05/11] media: adv748x-csi2: Implement enum_mbus_codes Jacopo Mondi
2024-05-09 12:42   ` Laurent Pinchart
2024-05-09 13:44     ` Jacopo Mondi
2024-05-09 14:32       ` Laurent Pinchart
2024-05-06 16:49 ` [PATCH v2 06/11] media: adv748x-csi2: Validate the image format Jacopo Mondi
2024-05-09 12:44   ` Laurent Pinchart
2024-05-06 16:49 ` [PATCH v2 07/11] media: adv748x-csi2: Use the subdev active state Jacopo Mondi
2024-05-09 12:45   ` Laurent Pinchart [this message]
2024-05-06 16:49 ` [PATCH v2 08/11] media: adv748x-afe: Use 1X16 media bus code Jacopo Mondi
2024-05-09 12:47   ` Laurent Pinchart
2024-05-06 16:49 ` [PATCH v2 09/11] media: max9286: Fix enum_mbus_code Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 10/11] media: max9286: Use the subdev active state Jacopo Mondi
2024-05-09 14:35   ` Laurent Pinchart
2024-05-09 15:19     ` Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 11/11] media: max9286: Use frame interval from subdev state Jacopo Mondi
2024-05-09 12:51   ` Laurent Pinchart
2024-05-09 13:45     ` Jacopo Mondi
2024-05-09 14:11       ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240509124544.GD17123@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.