* [PATCH] Add firmware and bootloader information
@ 2024-05-12 21:40 Marius Zachmann
0 siblings, 0 replies; only message in thread
From: Marius Zachmann @ 2024-05-12 21:40 UTC (permalink / raw)
To: Guenter Roeck
Cc: Marius Zachmann, Jean Delvare, Jonathan Corbet, linux-hwmon,
linux-kernel
This patch adds:
- Reading the firmware and bootloader version of the device
- Debugfs entries: firmware_version and bootloader_version
- Updated documentation
Signed-off-by: Marius Zachmann <mail@mariuszachmann.de>
---
Documentation/hwmon/corsair-cpro.rst | 8 +++
drivers/hwmon/corsair-cpro.c | 80 ++++++++++++++++++++++++++++
2 files changed, 88 insertions(+)
diff --git a/Documentation/hwmon/corsair-cpro.rst b/Documentation/hwmon/corsair-cpro.rst
index 751f95476b57..11135d7ec6b9 100644
--- a/Documentation/hwmon/corsair-cpro.rst
+++ b/Documentation/hwmon/corsair-cpro.rst
@@ -39,3 +39,11 @@ fan[1-6]_target Sets fan speed target rpm.
pwm[1-6] Sets the fan speed. Values from 0-255. Can only be read if pwm
was set directly.
======================= =====================================================================
+
+Debugfs entries
+---------------
+
+======================= ===========================
+firmware_version Version of the firmware
+bootloader_version Version of the bootloader
+======================= ===========================
diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c
index 3e63666a61bd..4be8a98250a9 100644
--- a/drivers/hwmon/corsair-cpro.c
+++ b/drivers/hwmon/corsair-cpro.c
@@ -10,11 +10,13 @@
#include <linux/bitops.h>
#include <linux/completion.h>
+#include <linux/debugfs.h>
#include <linux/hid.h>
#include <linux/hwmon.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/types.h>
@@ -28,6 +30,8 @@
#define LABEL_LENGTH 11
#define REQ_TIMEOUT 300
+#define CTL_GET_FW_VER 0x02 /* returns the firmware version in bytes 1-3 */
+#define CTL_GET_BL_VER 0x06 /* returns the bootloader version in bytes 1-2 */
#define CTL_GET_TMP_CNCT 0x10 /*
* returns in bytes 1-4 for each temp sensor:
* 0 not connected
@@ -78,6 +82,7 @@
struct ccp_device {
struct hid_device *hdev;
struct device *hwmon_dev;
+ struct dentry *debugfs;
/* For reinitializing the completion below */
spinlock_t wait_input_report_lock;
struct completion wait_input_report;
@@ -88,6 +93,8 @@ struct ccp_device {
DECLARE_BITMAP(temp_cnct, NUM_TEMP_SENSORS);
DECLARE_BITMAP(fan_cnct, NUM_FANS);
char fan_label[6][LABEL_LENGTH];
+ u8 firmware_ver[3];
+ u8 bootloader_ver[2];
};
/* converts response error in buffer to errno */
@@ -496,6 +503,71 @@ static int get_temp_cnct(struct ccp_device *ccp)
return 0;
}
+/* read firmware and bootloader version */
+static int get_fw_version(struct ccp_device *ccp)
+{
+ int ret;
+
+ ret = send_usb_cmd(ccp, CTL_GET_FW_VER, 0, 0, 0);
+ if (ret)
+ return ret;
+
+ ccp->firmware_ver[0] = ccp->buffer[1];
+ ccp->firmware_ver[1] = ccp->buffer[2];
+ ccp->firmware_ver[2] = ccp->buffer[3];
+
+ ret = send_usb_cmd(ccp, CTL_GET_BL_VER, 0, 0, 0);
+ if (ret)
+ return ret;
+
+ ccp->bootloader_ver[0] = ccp->buffer[1];
+ ccp->bootloader_ver[1] = ccp->buffer[2];
+
+ return 0;
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+static int firmware_show(struct seq_file *seqf, void *unused)
+{
+ struct ccp_device *ccp = seqf->private;
+
+ seq_printf(seqf, "%d.%d.%d\n",
+ ccp->firmware_ver[0],
+ ccp->firmware_ver[1],
+ ccp->firmware_ver[2]);
+
+ return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(firmware);
+
+static int bootloader_show(struct seq_file *seqf, void *unused)
+{
+ struct ccp_device *ccp = seqf->private;
+
+ seq_printf(seqf, "%d.%d\n",
+ ccp->bootloader_ver[0],
+ ccp->bootloader_ver[1]);
+
+ return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(bootloader);
+
+static void ccp_debugfs_init(struct ccp_device *ccp)
+{
+ ccp->debugfs = debugfs_create_dir("corsaircpro", NULL);
+ debugfs_create_file("firmware_version", 0444, ccp->debugfs, ccp, &firmware_fops);
+ debugfs_create_file("bootloader_version", 0444, ccp->debugfs, ccp, &bootloader_fops);
+}
+
+#else
+
+static void ccp_debugfs_init(struct ccp_device *ccp)
+{
+}
+
+#endif
+
static int ccp_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
struct ccp_device *ccp;
@@ -542,6 +614,13 @@ static int ccp_probe(struct hid_device *hdev, const struct hid_device_id *id)
ret = get_fan_cnct(ccp);
if (ret)
goto out_hw_close;
+
+ ret = get_fw_version(ccp);
+ if (ret)
+ goto out_hw_close;
+
+ ccp_debugfs_init(ccp);
+
ccp->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "corsaircpro",
ccp, &ccp_chip_info, NULL);
if (IS_ERR(ccp->hwmon_dev)) {
@@ -562,6 +641,7 @@ static void ccp_remove(struct hid_device *hdev)
{
struct ccp_device *ccp = hid_get_drvdata(hdev);
+ debugfs_remove_recursive(ccp->debugfs);
hwmon_device_unregister(ccp->hwmon_dev);
hid_hw_close(hdev);
hid_hw_stop(hdev);
--
2.45.0
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2024-05-12 21:40 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-05-12 21:40 [PATCH] Add firmware and bootloader information Marius Zachmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.