From: Eddie James <eajames@linux.ibm.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v3 14/40] fsi: hub: Use common initialization and link enable
Date: Thu, 16 May 2024 13:18:41 -0500 [thread overview]
Message-ID: <20240516181907.3468796-15-eajames@linux.ibm.com> (raw)
In-Reply-To: <20240516181907.3468796-1-eajames@linux.ibm.com>
Set up an FSI regmap for the hub master to use the new common
master initialization and link enable procedures.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
drivers/fsi/fsi-master-hub.c | 142 ++++++-----------------------------
1 file changed, 23 insertions(+), 119 deletions(-)
diff --git a/drivers/fsi/fsi-master-hub.c b/drivers/fsi/fsi-master-hub.c
index eea8649fee74d..91ad6b7728fa2 100644
--- a/drivers/fsi/fsi-master-hub.c
+++ b/drivers/fsi/fsi-master-hub.c
@@ -9,6 +9,7 @@
#include <linux/fsi.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/regmap.h>
#include <linux/slab.h>
#include "fsi-master.h"
@@ -16,8 +17,6 @@
#define FSI_ENGID_HUB_MASTER 0x1c
-#define FSI_LINK_ENABLE_SETUP_TIME 10 /* in mS */
-
/*
* FSI hub master support
*
@@ -78,134 +77,33 @@ static int hub_master_break(struct fsi_master *master, int link)
return hub_master_write(master, link, 0, addr, &cmd, sizeof(cmd));
}
-static int hub_master_link_enable(struct fsi_master *master, int link,
- bool enable)
-{
- struct fsi_master_hub *hub = to_fsi_master_hub(master);
- int idx, bit;
- __be32 reg;
- int rc;
-
- idx = link / 32;
- bit = link % 32;
-
- reg = cpu_to_be32(0x80000000 >> bit);
-
- if (!enable)
- return fsi_device_write(hub->upstream, FSI_MCENP0 + (4 * idx),
- ®, 4);
-
- rc = fsi_device_write(hub->upstream, FSI_MSENP0 + (4 * idx), ®, 4);
- if (rc)
- return rc;
-
- mdelay(FSI_LINK_ENABLE_SETUP_TIME);
-
- return 0;
-}
-
static void hub_master_release(struct device *dev)
{
struct fsi_master_hub *hub = to_fsi_master_hub(to_fsi_master(dev));
+ regmap_exit(hub->master.map);
kfree(hub);
}
-/* mmode encoders */
-static inline u32 fsi_mmode_crs0(u32 x)
-{
- return (x & FSI_MMODE_CRS0MASK) << FSI_MMODE_CRS0SHFT;
-}
-
-static inline u32 fsi_mmode_crs1(u32 x)
-{
- return (x & FSI_MMODE_CRS1MASK) << FSI_MMODE_CRS1SHFT;
-}
-
-static int hub_master_init(struct fsi_master_hub *hub)
-{
- struct fsi_device *dev = hub->upstream;
- __be32 reg;
- int rc;
-
- reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
- | FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
- rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg));
- if (rc)
- return rc;
-
- /* Initialize the MFSI (hub master) engine */
- reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
- | FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
- rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg));
- if (rc)
- return rc;
-
- reg = cpu_to_be32(FSI_MECTRL_EOAE | FSI_MECTRL_P8_AUTO_TERM);
- rc = fsi_device_write(dev, FSI_MECTRL, ®, sizeof(reg));
- if (rc)
- return rc;
-
- reg = cpu_to_be32(FSI_MMODE_EIP | FSI_MMODE_ECRC | FSI_MMODE_EPC
- | fsi_mmode_crs0(1) | fsi_mmode_crs1(1)
- | FSI_MMODE_P8_TO_LSB);
- rc = fsi_device_write(dev, FSI_MMODE, ®, sizeof(reg));
- if (rc)
- return rc;
-
- reg = cpu_to_be32(0xffff0000);
- rc = fsi_device_write(dev, FSI_MDLYR, ®, sizeof(reg));
- if (rc)
- return rc;
-
- reg = cpu_to_be32(~0);
- rc = fsi_device_write(dev, FSI_MSENP0, ®, sizeof(reg));
- if (rc)
- return rc;
-
- /* Leave enabled long enough for master logic to set up */
- mdelay(FSI_LINK_ENABLE_SETUP_TIME);
-
- rc = fsi_device_write(dev, FSI_MCENP0, ®, sizeof(reg));
- if (rc)
- return rc;
-
- rc = fsi_device_read(dev, FSI_MAEB, ®, sizeof(reg));
- if (rc)
- return rc;
-
- reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK);
- rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg));
- if (rc)
- return rc;
-
- rc = fsi_device_read(dev, FSI_MLEVP0, ®, sizeof(reg));
- if (rc)
- return rc;
-
- /* Reset the master bridge */
- reg = cpu_to_be32(FSI_MRESB_RST_GEN);
- rc = fsi_device_write(dev, FSI_MRESB0, ®, sizeof(reg));
- if (rc)
- return rc;
-
- reg = cpu_to_be32(FSI_MRESB_RST_ERR);
- return fsi_device_write(dev, FSI_MRESB0, ®, sizeof(reg));
-}
-
static int hub_master_probe(struct device *dev)
{
+ struct regmap_config hub_master_regmap_config;
struct fsi_device *fsi_dev = to_fsi_dev(dev);
struct fsi_master_hub *hub;
+ struct regmap *map;
uint32_t reg, links;
- __be32 __reg;
int rc;
- rc = fsi_device_read(fsi_dev, FSI_MVER, &__reg, sizeof(__reg));
+ fsi_master_regmap_config(&hub_master_regmap_config);
+ hub_master_regmap_config.reg_base = fsi_dev->addr;
+ map = regmap_init_fsi(fsi_dev, &hub_master_regmap_config);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+
+ rc = regmap_read(map, FSI_MVER, ®);
if (rc)
- return rc;
+ goto err_regmap;
- reg = be32_to_cpu(__reg);
links = (reg >> 8) & 0xff;
dev_dbg(dev, "hub version %08x (%d links)\n", reg, links);
@@ -213,7 +111,7 @@ static int hub_master_probe(struct device *dev)
FSI_HUB_LINK_SIZE * links);
if (rc) {
dev_err(dev, "can't claim slave address range for links");
- return rc;
+ goto err_regmap;
}
hub = kzalloc(sizeof(*hub), GFP_KERNEL);
@@ -229,22 +127,24 @@ static int hub_master_probe(struct device *dev)
hub->master.dev.parent = dev;
hub->master.dev.release = hub_master_release;
hub->master.dev.of_node = of_node_get(dev_of_node(dev));
+ hub->master.map = map;
hub->master.idx = fsi_dev->slave->link + 1;
hub->master.n_links = links;
- hub->master.flags = FSI_MASTER_FLAG_NO_BREAK_SID;
+ hub->master.flags = FSI_MASTER_FLAG_NO_BREAK_SID | FSI_MASTER_FLAG_INTERRUPT;
hub->master.read = hub_master_read;
hub->master.write = hub_master_write;
hub->master.send_break = hub_master_break;
- hub->master.link_enable = hub_master_link_enable;
dev_set_drvdata(dev, hub);
- hub_master_init(hub);
+ rc = fsi_master_init(&hub->master, fsi_dev->slave->master->clock_frequency);
+ if (rc)
+ goto err_free;
rc = fsi_master_register(&hub->master);
if (rc)
- goto err_release;
+ goto err_free;
/* At this point, fsi_master_register performs the device_initialize(),
* and holds the sole reference on master.dev. This means the device
@@ -256,9 +156,13 @@ static int hub_master_probe(struct device *dev)
get_device(&hub->master.dev);
return 0;
+err_free:
+ kfree(hub);
err_release:
fsi_slave_release_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET,
FSI_HUB_LINK_SIZE * links);
+err_regmap:
+ regmap_exit(map);
return rc;
}
--
2.39.3
WARNING: multiple messages have this Message-ID (diff)
From: Eddie James <eajames@linux.ibm.com>
To: linux-fsi@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-spi@vger.kernel.org, broonie@kernel.org,
andi.shyti@kernel.org, joel@jms.id.au, alistair@popple.id.au,
jk@ozlabs.org, andrew@codeconstruct.com.au,
linux-aspeed@lists.ozlabs.org, eajames@linux.ibm.com
Subject: [PATCH v3 14/40] fsi: hub: Use common initialization and link enable
Date: Thu, 16 May 2024 13:18:41 -0500 [thread overview]
Message-ID: <20240516181907.3468796-15-eajames@linux.ibm.com> (raw)
In-Reply-To: <20240516181907.3468796-1-eajames@linux.ibm.com>
Set up an FSI regmap for the hub master to use the new common
master initialization and link enable procedures.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
drivers/fsi/fsi-master-hub.c | 142 ++++++-----------------------------
1 file changed, 23 insertions(+), 119 deletions(-)
diff --git a/drivers/fsi/fsi-master-hub.c b/drivers/fsi/fsi-master-hub.c
index eea8649fee74d..91ad6b7728fa2 100644
--- a/drivers/fsi/fsi-master-hub.c
+++ b/drivers/fsi/fsi-master-hub.c
@@ -9,6 +9,7 @@
#include <linux/fsi.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/regmap.h>
#include <linux/slab.h>
#include "fsi-master.h"
@@ -16,8 +17,6 @@
#define FSI_ENGID_HUB_MASTER 0x1c
-#define FSI_LINK_ENABLE_SETUP_TIME 10 /* in mS */
-
/*
* FSI hub master support
*
@@ -78,134 +77,33 @@ static int hub_master_break(struct fsi_master *master, int link)
return hub_master_write(master, link, 0, addr, &cmd, sizeof(cmd));
}
-static int hub_master_link_enable(struct fsi_master *master, int link,
- bool enable)
-{
- struct fsi_master_hub *hub = to_fsi_master_hub(master);
- int idx, bit;
- __be32 reg;
- int rc;
-
- idx = link / 32;
- bit = link % 32;
-
- reg = cpu_to_be32(0x80000000 >> bit);
-
- if (!enable)
- return fsi_device_write(hub->upstream, FSI_MCENP0 + (4 * idx),
- ®, 4);
-
- rc = fsi_device_write(hub->upstream, FSI_MSENP0 + (4 * idx), ®, 4);
- if (rc)
- return rc;
-
- mdelay(FSI_LINK_ENABLE_SETUP_TIME);
-
- return 0;
-}
-
static void hub_master_release(struct device *dev)
{
struct fsi_master_hub *hub = to_fsi_master_hub(to_fsi_master(dev));
+ regmap_exit(hub->master.map);
kfree(hub);
}
-/* mmode encoders */
-static inline u32 fsi_mmode_crs0(u32 x)
-{
- return (x & FSI_MMODE_CRS0MASK) << FSI_MMODE_CRS0SHFT;
-}
-
-static inline u32 fsi_mmode_crs1(u32 x)
-{
- return (x & FSI_MMODE_CRS1MASK) << FSI_MMODE_CRS1SHFT;
-}
-
-static int hub_master_init(struct fsi_master_hub *hub)
-{
- struct fsi_device *dev = hub->upstream;
- __be32 reg;
- int rc;
-
- reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
- | FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
- rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg));
- if (rc)
- return rc;
-
- /* Initialize the MFSI (hub master) engine */
- reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
- | FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
- rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg));
- if (rc)
- return rc;
-
- reg = cpu_to_be32(FSI_MECTRL_EOAE | FSI_MECTRL_P8_AUTO_TERM);
- rc = fsi_device_write(dev, FSI_MECTRL, ®, sizeof(reg));
- if (rc)
- return rc;
-
- reg = cpu_to_be32(FSI_MMODE_EIP | FSI_MMODE_ECRC | FSI_MMODE_EPC
- | fsi_mmode_crs0(1) | fsi_mmode_crs1(1)
- | FSI_MMODE_P8_TO_LSB);
- rc = fsi_device_write(dev, FSI_MMODE, ®, sizeof(reg));
- if (rc)
- return rc;
-
- reg = cpu_to_be32(0xffff0000);
- rc = fsi_device_write(dev, FSI_MDLYR, ®, sizeof(reg));
- if (rc)
- return rc;
-
- reg = cpu_to_be32(~0);
- rc = fsi_device_write(dev, FSI_MSENP0, ®, sizeof(reg));
- if (rc)
- return rc;
-
- /* Leave enabled long enough for master logic to set up */
- mdelay(FSI_LINK_ENABLE_SETUP_TIME);
-
- rc = fsi_device_write(dev, FSI_MCENP0, ®, sizeof(reg));
- if (rc)
- return rc;
-
- rc = fsi_device_read(dev, FSI_MAEB, ®, sizeof(reg));
- if (rc)
- return rc;
-
- reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK);
- rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg));
- if (rc)
- return rc;
-
- rc = fsi_device_read(dev, FSI_MLEVP0, ®, sizeof(reg));
- if (rc)
- return rc;
-
- /* Reset the master bridge */
- reg = cpu_to_be32(FSI_MRESB_RST_GEN);
- rc = fsi_device_write(dev, FSI_MRESB0, ®, sizeof(reg));
- if (rc)
- return rc;
-
- reg = cpu_to_be32(FSI_MRESB_RST_ERR);
- return fsi_device_write(dev, FSI_MRESB0, ®, sizeof(reg));
-}
-
static int hub_master_probe(struct device *dev)
{
+ struct regmap_config hub_master_regmap_config;
struct fsi_device *fsi_dev = to_fsi_dev(dev);
struct fsi_master_hub *hub;
+ struct regmap *map;
uint32_t reg, links;
- __be32 __reg;
int rc;
- rc = fsi_device_read(fsi_dev, FSI_MVER, &__reg, sizeof(__reg));
+ fsi_master_regmap_config(&hub_master_regmap_config);
+ hub_master_regmap_config.reg_base = fsi_dev->addr;
+ map = regmap_init_fsi(fsi_dev, &hub_master_regmap_config);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+
+ rc = regmap_read(map, FSI_MVER, ®);
if (rc)
- return rc;
+ goto err_regmap;
- reg = be32_to_cpu(__reg);
links = (reg >> 8) & 0xff;
dev_dbg(dev, "hub version %08x (%d links)\n", reg, links);
@@ -213,7 +111,7 @@ static int hub_master_probe(struct device *dev)
FSI_HUB_LINK_SIZE * links);
if (rc) {
dev_err(dev, "can't claim slave address range for links");
- return rc;
+ goto err_regmap;
}
hub = kzalloc(sizeof(*hub), GFP_KERNEL);
@@ -229,22 +127,24 @@ static int hub_master_probe(struct device *dev)
hub->master.dev.parent = dev;
hub->master.dev.release = hub_master_release;
hub->master.dev.of_node = of_node_get(dev_of_node(dev));
+ hub->master.map = map;
hub->master.idx = fsi_dev->slave->link + 1;
hub->master.n_links = links;
- hub->master.flags = FSI_MASTER_FLAG_NO_BREAK_SID;
+ hub->master.flags = FSI_MASTER_FLAG_NO_BREAK_SID | FSI_MASTER_FLAG_INTERRUPT;
hub->master.read = hub_master_read;
hub->master.write = hub_master_write;
hub->master.send_break = hub_master_break;
- hub->master.link_enable = hub_master_link_enable;
dev_set_drvdata(dev, hub);
- hub_master_init(hub);
+ rc = fsi_master_init(&hub->master, fsi_dev->slave->master->clock_frequency);
+ if (rc)
+ goto err_free;
rc = fsi_master_register(&hub->master);
if (rc)
- goto err_release;
+ goto err_free;
/* At this point, fsi_master_register performs the device_initialize(),
* and holds the sole reference on master.dev. This means the device
@@ -256,9 +156,13 @@ static int hub_master_probe(struct device *dev)
get_device(&hub->master.dev);
return 0;
+err_free:
+ kfree(hub);
err_release:
fsi_slave_release_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET,
FSI_HUB_LINK_SIZE * links);
+err_regmap:
+ regmap_exit(map);
return rc;
}
--
2.39.3
next prev parent reply other threads:[~2024-05-16 18:18 UTC|newest]
Thread overview: 92+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-16 18:18 [PATCH v3 00/40] fsi: Add interrupt support Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 01/40] fsi: hub: Set master index to link number plus one Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 02/40] fsi: Move slave definitions to fsi-slave.h Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 03/40] fsi: Fix slave addressing after break command Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 04/40] fsi: Use a defined value for default echo delay Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 05/40] fsi: Calculate local bus clock frequency Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 06/40] fsi: core: Improve master read/write/error traces Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 07/40] fsi: core: Add slave error trace Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 08/40] fsi: core: Reset errors instead of clearing interrupts Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 09/40] fsi: aspeed: Add AST2700 support Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 10/40] fsi: core: Add slave spinlock Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 11/40] fsi: core: Allow cfam device type aliases Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 12/40] fsi: core: Add common regmap master functions Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 13/40] fsi: core: Disable relative addressing during scan Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` Eddie James [this message]
2024-05-16 18:18 ` [PATCH v3 14/40] fsi: hub: Use common initialization and link enable Eddie James
2024-05-16 18:18 ` [PATCH v3 15/40] fsi: aspeed: " Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 16/40] fsi: aspeed: Remove cfam reset sysfs file in error path and remove Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 17/40] fsi: aspeed: Refactor trace functions Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 18/40] fsi: aspeed: Don't clear all IRQs during OPB transfers Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 19/40] fsi: aspeed: Only read result register for successful read Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 20/40] fsi: aspeed: Switch to spinlock Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 21/40] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 22/40] fsi: aspeed: Use common master error handler Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 23/40] fsi: core: Add interrupt support Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-17 20:41 ` kernel test robot
2024-05-17 20:41 ` kernel test robot
2024-05-16 18:18 ` [PATCH v3 24/40] fsi: aspeed: " Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 25/40] fsi: hub: " Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 26/40] i2c: fsi: Calculate clock divider from local bus frequency Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 27/40] i2c: fsi: Improve formatting Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 28/40] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 29/40] i2c: fsi: Remove list structure of ports Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 30/40] i2c: fsi: Define a function to check status error bits Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 31/40] i2c: fsi: Add boolean for skip stop command on abort Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:18 ` [PATCH v3 32/40] i2c: fsi: Add interrupt support Eddie James
2024-05-16 18:18 ` Eddie James
2024-05-16 18:19 ` [PATCH v3 33/40] fsi: hub master: Reset hub master after errors Eddie James
2024-05-16 18:19 ` Eddie James
2024-05-16 18:19 ` [PATCH v3 34/40] fsi: core: Add master register read-only sysfs Eddie James
2024-05-16 18:19 ` Eddie James
2024-05-16 18:19 ` [PATCH v3 35/40] fsi: core: Add slave " Eddie James
2024-05-16 18:19 ` Eddie James
2024-05-16 18:19 ` [PATCH v3 36/40] fsi: i2cr: Adjust virtual CFAM ID to match Odyssey chip Eddie James
2024-05-16 18:19 ` Eddie James
2024-05-16 18:19 ` [PATCH v3 37/40] fsi: core: Add different types of CFAM Eddie James
2024-05-16 18:19 ` Eddie James
2024-05-17 12:38 ` kernel test robot
2024-05-17 12:38 ` kernel test robot
2024-05-17 15:49 ` kernel test robot
2024-05-17 15:49 ` kernel test robot
2024-05-18 1:03 ` kernel test robot
2024-05-18 1:03 ` kernel test robot
2024-05-16 18:19 ` [PATCH v3 38/40] spi: fsi: Calculate clock divider from local bus frequency Eddie James
2024-05-16 18:19 ` Eddie James
2024-05-16 18:24 ` Mark Brown
2024-05-16 18:24 ` Mark Brown
2024-05-16 18:19 ` [PATCH v3 39/40] ARM: dts: aspeed: P10 and tacoma: Set FSI clock frequency Eddie James
2024-05-16 18:19 ` Eddie James
2024-05-16 18:19 ` [PATCH v3 40/40] ARM: dts: aspeed: P10: Bump SPI max frequencies Eddie James
2024-05-16 18:19 ` Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240516181907.3468796-15-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.