All of lore.kernel.org
 help / color / mirror / Atom feed
From: Markus Schneider-Pargmann <msp@baylibre.com>
To: Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Vignesh Raghavendra <vigneshr@ti.com>
Cc: Vibhore Vardhan <vibhore@ti.com>,
	Kevin Hilman <khilman@baylibre.com>, Dhruva Gole <d-gole@ti.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Markus Schneider-Pargmann <msp@baylibre.com>
Subject: [PATCH 3/6] arm64: dts: ti: k3-pinctrl: Add WKUP_EN flag
Date: Thu, 23 May 2024 10:02:22 +0200	[thread overview]
Message-ID: <20240523080225.1288617-4-msp@baylibre.com> (raw)
In-Reply-To: <20240523080225.1288617-1-msp@baylibre.com>

WKUP_EN is a flag to enable pin wakeup. Any activity will wakeup the SoC
in that case.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
 arch/arm64/boot/dts/ti/k3-pinctrl.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
index 4cd2df467d0b..e36bce881f44 100644
--- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -12,6 +12,7 @@
 #define PULLTYPESEL_SHIFT	(17)
 #define RXACTIVE_SHIFT		(18)
 #define DEBOUNCE_SHIFT		(11)
+#define WKUP_EN_SHIFT		(29)
 
 #define PULL_DISABLE		(1 << PULLUDEN_SHIFT)
 #define PULL_ENABLE		(0 << PULLUDEN_SHIFT)
@@ -38,6 +39,8 @@
 #define PIN_DEBOUNCE_CONF5	(5 << DEBOUNCE_SHIFT)
 #define PIN_DEBOUNCE_CONF6	(6 << DEBOUNCE_SHIFT)
 
+#define WKUP_EN			(1 << WKUP_EN_SHIFT)
+
 #define AM62AX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
 #define AM62AX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
 
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Markus Schneider-Pargmann <msp@baylibre.com>
To: Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Vignesh Raghavendra <vigneshr@ti.com>
Cc: Vibhore Vardhan <vibhore@ti.com>,
	Kevin Hilman <khilman@baylibre.com>, Dhruva Gole <d-gole@ti.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Markus Schneider-Pargmann <msp@baylibre.com>
Subject: [PATCH 3/6] arm64: dts: ti: k3-pinctrl: Add WKUP_EN flag
Date: Thu, 23 May 2024 10:02:22 +0200	[thread overview]
Message-ID: <20240523080225.1288617-4-msp@baylibre.com> (raw)
In-Reply-To: <20240523080225.1288617-1-msp@baylibre.com>

WKUP_EN is a flag to enable pin wakeup. Any activity will wakeup the SoC
in that case.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
---
 arch/arm64/boot/dts/ti/k3-pinctrl.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
index 4cd2df467d0b..e36bce881f44 100644
--- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -12,6 +12,7 @@
 #define PULLTYPESEL_SHIFT	(17)
 #define RXACTIVE_SHIFT		(18)
 #define DEBOUNCE_SHIFT		(11)
+#define WKUP_EN_SHIFT		(29)
 
 #define PULL_DISABLE		(1 << PULLUDEN_SHIFT)
 #define PULL_ENABLE		(0 << PULLUDEN_SHIFT)
@@ -38,6 +39,8 @@
 #define PIN_DEBOUNCE_CONF5	(5 << DEBOUNCE_SHIFT)
 #define PIN_DEBOUNCE_CONF6	(6 << DEBOUNCE_SHIFT)
 
+#define WKUP_EN			(1 << WKUP_EN_SHIFT)
+
 #define AM62AX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
 #define AM62AX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
 
-- 
2.43.0


  parent reply	other threads:[~2024-05-23  8:03 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-23  8:02 [PATCH 0/6] firmware: ti_sci: Partial-IO support Markus Schneider-Pargmann
2024-05-23  8:02 ` Markus Schneider-Pargmann
2024-05-23  8:02 ` [PATCH 1/6] dt-bindings: ti, sci: Add property for partial-io-wakeup-sources Markus Schneider-Pargmann
2024-05-23  8:02   ` Markus Schneider-Pargmann
2024-05-24  0:43   ` Nishanth Menon
2024-05-24  0:43     ` Nishanth Menon
2024-05-27 19:07   ` Krzysztof Kozlowski
2024-05-27 19:07     ` Krzysztof Kozlowski
2024-05-23  8:02 ` [PATCH 2/6] firmware: ti_sci: Partial-IO support Markus Schneider-Pargmann
2024-05-23  8:02   ` Markus Schneider-Pargmann
2024-05-24  5:46   ` Nishanth Menon
2024-05-24  5:46     ` Nishanth Menon
2024-05-23  8:02 ` Markus Schneider-Pargmann [this message]
2024-05-23  8:02   ` [PATCH 3/6] arm64: dts: ti: k3-pinctrl: Add WKUP_EN flag Markus Schneider-Pargmann
2024-05-24  5:58   ` Nishanth Menon
2024-05-24  5:58     ` Nishanth Menon
2024-05-23  8:02 ` [PATCH 4/6] arm64: dts: ti: k3-am62: Add partial-io wakeup sources Markus Schneider-Pargmann
2024-05-23  8:02   ` Markus Schneider-Pargmann
2024-05-23  8:02 ` [PATCH 5/6] arm64: dts: ti: k3-am62a: " Markus Schneider-Pargmann
2024-05-23  8:02   ` Markus Schneider-Pargmann
2024-05-23  8:02 ` [PATCH 6/6] arm64: dts: ti: k3-am62p: " Markus Schneider-Pargmann
2024-05-23  8:02   ` Markus Schneider-Pargmann
2024-05-24  5:54   ` Nishanth Menon
2024-05-24  5:54     ` Nishanth Menon
2024-05-27  8:48     ` Dhruva Gole
2024-05-27  8:48       ` Dhruva Gole
2024-05-24  5:53 ` [PATCH 0/6] firmware: ti_sci: Partial-IO support Nishanth Menon
2024-05-24  5:53   ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240523080225.1288617-4-msp@baylibre.com \
    --to=msp@baylibre.com \
    --cc=conor+dt@kernel.org \
    --cc=d-gole@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@baylibre.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh@kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=vibhore@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.