[PATCH AUTOSEL 5.10 01/13] selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh

[PATCH AUTOSEL 5.10 01/13] selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh

[Sasha Levin]

From: "Alessandro Carminati (Red Hat)" <alessandro.carminati@gmail.com>

[ Upstream commit f803bcf9208a2540acb4c32bdc3616673169f490 ]

In some systems, the netcat server can incur in delay to start listening.
When this happens, the test can randomly fail in various points.
This is an example error message:

   # ip gre none gso
   # encap 192.168.1.1 to 192.168.1.2, type gre, mac none len 2000
   # test basic connectivity
   # Ncat: Connection refused.

The issue stems from a race condition between the netcat client and server.
The test author had addressed this problem by implementing a sleep, which
I have removed in this patch.
This patch introduces a function capable of sleeping for up to two seconds.
However, it can terminate the waiting period early if the port is reported
to be listening.

Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240314105911.213411-1-alessandro.carminati@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/test_tc_tunnel.sh | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/test_tc_tunnel.sh b/tools/testing/selftests/bpf/test_tc_tunnel.sh
index 7c76b841b17bb..21bde60c95230 100755
--- a/tools/testing/selftests/bpf/test_tc_tunnel.sh
+++ b/tools/testing/selftests/bpf/test_tc_tunnel.sh
@@ -71,7 +71,6 @@ cleanup() {
 server_listen() {
 	ip netns exec "${ns2}" nc "${netcat_opt}" -l -p "${port}" > "${outfile}" &
 	server_pid=$!
-	sleep 0.2
 }
 
 client_connect() {
@@ -92,6 +91,16 @@ verify_data() {
 	fi
 }
 
+wait_for_port() {
+	for i in $(seq 20); do
+		if ip netns exec "${ns2}" ss ${2:--4}OHntl | grep -q "$1"; then
+			return 0
+		fi
+		sleep 0.1
+	done
+	return 1
+}
+
 set -e
 
 # no arguments: automated test, run all
@@ -183,6 +192,7 @@ setup
 # basic communication works
 echo "test basic connectivity"
 server_listen
+wait_for_port ${port} ${netcat_opt}
 client_connect
 verify_data
 
@@ -194,6 +204,7 @@ ip netns exec "${ns1}" tc filter add dev veth1 egress \
 	section "encap_${tuntype}_${mac}"
 echo "test bpf encap without decap (expect failure)"
 server_listen
+wait_for_port ${port} ${netcat_opt}
 ! client_connect
 
 if [[ "$tuntype" =~ "udp" ]]; then
-- 
2.43.0

[PATCH AUTOSEL 5.10 02/13] selftests/bpf: Fix flaky test btf_map_in_map/lookup_update

[Sasha Levin]

From: Yonghong Song <yonghong.song@linux.dev>

[ Upstream commit 14bb1e8c8d4ad5d9d2febb7d19c70a3cf536e1e5 ]

Recently, I frequently hit the following test failure:

  [root@arch-fb-vm1 bpf]# ./test_progs -n 33/1
  test_lookup_update:PASS:skel_open 0 nsec
  [...]
  test_lookup_update:PASS:sync_rcu 0 nsec
  test_lookup_update:FAIL:map1_leak inner_map1 leaked!
  #33/1    btf_map_in_map/lookup_update:FAIL
  #33      btf_map_in_map:FAIL

In the test, after map is closed and then after two rcu grace periods,
it is assumed that map_id is not available to user space.

But the above assumption cannot be guaranteed. After zero or one
or two rcu grace periods in different siturations, the actual
freeing-map-work is put into a workqueue. Later on, when the work
is dequeued, the map will be actually freed.
See bpf_map_put() in kernel/bpf/syscall.c.

By using workqueue, there is no ganrantee that map will be actually
freed after a couple of rcu grace periods. This patch removed
such map leak detection and then the test can pass consistently.

Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240322061353.632136-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/bpf/prog_tests/btf_map_in_map.c | 26 +------------------
 1 file changed, 1 insertion(+), 25 deletions(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/btf_map_in_map.c b/tools/testing/selftests/bpf/prog_tests/btf_map_in_map.c
index 76ebe4c250f11..a434828bc7ab7 100644
--- a/tools/testing/selftests/bpf/prog_tests/btf_map_in_map.c
+++ b/tools/testing/selftests/bpf/prog_tests/btf_map_in_map.c
@@ -58,7 +58,7 @@ static void test_lookup_update(void)
 	int map1_fd, map2_fd, map3_fd, map4_fd, map5_fd, map1_id, map2_id;
 	int outer_arr_fd, outer_hash_fd, outer_arr_dyn_fd;
 	struct test_btf_map_in_map *skel;
-	int err, key = 0, val, i, fd;
+	int err, key = 0, val, i;
 
 	skel = test_btf_map_in_map__open_and_load();
 	if (CHECK(!skel, "skel_open", "failed to open&load skeleton\n"))
@@ -135,30 +135,6 @@ static void test_lookup_update(void)
 	CHECK(map1_id == 0, "map1_id", "failed to get ID 1\n");
 	CHECK(map2_id == 0, "map2_id", "failed to get ID 2\n");
 
-	test_btf_map_in_map__destroy(skel);
-	skel = NULL;
-
-	/* we need to either wait for or force synchronize_rcu(), before
-	 * checking for "still exists" condition, otherwise map could still be
-	 * resolvable by ID, causing false positives.
-	 *
-	 * Older kernels (5.8 and earlier) freed map only after two
-	 * synchronize_rcu()s, so trigger two, to be entirely sure.
-	 */
-	CHECK(kern_sync_rcu(), "sync_rcu", "failed\n");
-	CHECK(kern_sync_rcu(), "sync_rcu", "failed\n");
-
-	fd = bpf_map_get_fd_by_id(map1_id);
-	if (CHECK(fd >= 0, "map1_leak", "inner_map1 leaked!\n")) {
-		close(fd);
-		goto cleanup;
-	}
-	fd = bpf_map_get_fd_by_id(map2_id);
-	if (CHECK(fd >= 0, "map2_leak", "inner_map2 leaked!\n")) {
-		close(fd);
-		goto cleanup;
-	}
-
 cleanup:
 	test_btf_map_in_map__destroy(skel);
 }
-- 
2.43.0

[PATCH AUTOSEL 5.10 03/13] batman-adv: bypass empty buckets in batadv_purge_orig_ref()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 40dc8ab605894acae1473e434944924a22cfaaa0 ]

Many syzbot reports are pointing to soft lockups in
batadv_purge_orig_ref() [1]

Root cause is unknown, but we can avoid spending too much
time there and perhaps get more interesting reports.

[1]

watchdog: BUG: soft lockup - CPU#0 stuck for 27s! [kworker/u4:6:621]
Modules linked in:
irq event stamp: 6182794
 hardirqs last  enabled at (6182793): [<ffff8000801dae10>] __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386
 hardirqs last disabled at (6182794): [<ffff80008ad66a78>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline]
 hardirqs last disabled at (6182794): [<ffff80008ad66a78>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551
 softirqs last  enabled at (6182792): [<ffff80008aab71c4>] spin_unlock_bh include/linux/spinlock.h:396 [inline]
 softirqs last  enabled at (6182792): [<ffff80008aab71c4>] batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287
 softirqs last disabled at (6182790): [<ffff80008aab61dc>] spin_lock_bh include/linux/spinlock.h:356 [inline]
 softirqs last disabled at (6182790): [<ffff80008aab61dc>] batadv_purge_orig_ref+0x164/0x1228 net/batman-adv/originator.c:1271
CPU: 0 PID: 621 Comm: kworker/u4:6 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Workqueue: bat_events batadv_purge_orig
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : should_resched arch/arm64/include/asm/preempt.h:79 [inline]
 pc : __local_bh_enable_ip+0x228/0x44c kernel/softirq.c:388
 lr : __local_bh_enable_ip+0x224/0x44c kernel/softirq.c:386
sp : ffff800099007970
x29: ffff800099007980 x28: 1fffe00018fce1bd x27: dfff800000000000
x26: ffff0000d2620008 x25: ffff0000c7e70de8 x24: 0000000000000001
x23: 1fffe00018e57781 x22: dfff800000000000 x21: ffff80008aab71c4
x20: ffff0001b40136c0 x19: ffff0000c72bbc08 x18: 1fffe0001a817bb0
x17: ffff800125414000 x16: ffff80008032116c x15: 0000000000000001
x14: 1fffe0001ee9d610 x13: 0000000000000000 x12: 0000000000000003
x11: 0000000000000000 x10: 0000000000ff0100 x9 : 0000000000000000
x8 : 00000000005e5789 x7 : ffff80008aab61dc x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000
x2 : 0000000000000006 x1 : 0000000000000080 x0 : ffff800125414000
Call trace:
  __daif_local_irq_enable arch/arm64/include/asm/irqflags.h:27 [inline]
  arch_local_irq_enable arch/arm64/include/asm/irqflags.h:49 [inline]
  __local_bh_enable_ip+0x228/0x44c kernel/softirq.c:386
  __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline]
  _raw_spin_unlock_bh+0x3c/0x4c kernel/locking/spinlock.c:210
  spin_unlock_bh include/linux/spinlock.h:396 [inline]
  batadv_purge_orig_ref+0x114c/0x1228 net/batman-adv/originator.c:1287
  batadv_purge_orig+0x20/0x70 net/batman-adv/originator.c:1300
  process_one_work+0x694/0x1204 kernel/workqueue.c:2633
  process_scheduled_works kernel/workqueue.c:2706 [inline]
  worker_thread+0x938/0xef4 kernel/workqueue.c:2787
  kthread+0x288/0x310 kernel/kthread.c:388
  ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : arch_local_irq_enable+0x8/0xc arch/arm64/include/asm/irqflags.h:51
 lr : default_idle_call+0xf8/0x128 kernel/sched/idle.c:103
sp : ffff800093a17d30
x29: ffff800093a17d30 x28: dfff800000000000 x27: 1ffff00012742fb4
x26: ffff80008ec9d000 x25: 0000000000000000 x24: 0000000000000002
x23: 1ffff00011d93a74 x22: ffff80008ec9d3a0 x21: 0000000000000000
x20: ffff0000c19dbc00 x19: ffff8000802d0fd8 x18: 1fffe00036804396
x17: ffff80008ec9d000 x16: ffff8000802d089c x15: 0000000000000001
x14: 1fffe00036805f10 x13: 0000000000000000 x12: 0000000000000003
x11: 0000000000000001 x10: 0000000000000003 x9 : 0000000000000000
x8 : 00000000000ce8d1 x7 : ffff8000804609e4 x6 : 0000000000000000
x5 : 0000000000000001 x4 : 0000000000000001 x3 : ffff80008ad6aac0
x2 : 0000000000000000 x1 : ffff80008aedea60 x0 : ffff800125436000
Call trace:
  __daif_local_irq_enable arch/arm64/include/asm/irqflags.h:27 [inline]
  arch_local_irq_enable+0x8/0xc arch/arm64/include/asm/irqflags.h:49
  cpuidle_idle_call kernel/sched/idle.c:170 [inline]
  do_idle+0x1f0/0x4e8 kernel/sched/idle.c:312
  cpu_startup_entry+0x5c/0x74 kernel/sched/idle.c:410
  secondary_start_kernel+0x198/0x1c0 arch/arm64/kernel/smp.c:272
  __secondary_switched+0xb8/0xbc arch/arm64/kernel/head.S:404

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/originator.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c
index 2d38a09459bb5..3b2a3759efd6a 100644
--- a/net/batman-adv/originator.c
+++ b/net/batman-adv/originator.c
@@ -1285,6 +1285,8 @@ void batadv_purge_orig_ref(struct batadv_priv *bat_priv)
 	/* for all origins... */
 	for (i = 0; i < hash->size; i++) {
 		head = &hash->table[i];
+		if (hlist_empty(head))
+			continue;
 		list_lock = &hash->list_locks[i];
 
 		spin_lock_bh(list_lock);
-- 
2.43.0

[PATCH AUTOSEL 5.10 04/13] wifi: ath9k: work around memset overflow warning

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 61752ac69b69ed2e04444d090f6917c77ab36d42 ]

gcc-9 and some other older versions produce a false-positive warning
for zeroing two fields

In file included from include/linux/string.h:369,
                 from drivers/net/wireless/ath/ath9k/main.c:18:
In function 'fortify_memset_chk',
    inlined from 'ath9k_ps_wakeup' at drivers/net/wireless/ath/ath9k/main.c:140:3:
include/linux/fortify-string.h:462:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
  462 |                         __write_overflow_field(p_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Using a struct_group seems to reliably avoid the warning and
not make the code much uglier. The combined memset() should even
save a couple of cpu cycles.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240328135509.3755090-3-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath.h        | 6 ++++--
 drivers/net/wireless/ath/ath9k/main.c | 3 +--
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index f02a308a9ffc5..34654f710d8a1 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -171,8 +171,10 @@ struct ath_common {
 	unsigned int clockrate;
 
 	spinlock_t cc_lock;
-	struct ath_cycle_counters cc_ani;
-	struct ath_cycle_counters cc_survey;
+	struct_group(cc,
+		struct ath_cycle_counters cc_ani;
+		struct ath_cycle_counters cc_survey;
+	);
 
 	struct ath_regulatory regulatory;
 	struct ath_regulatory reg_world_copy;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index b2cfc483515c0..c5904d81d0006 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -135,8 +135,7 @@ void ath9k_ps_wakeup(struct ath_softc *sc)
 	if (power_mode != ATH9K_PM_AWAKE) {
 		spin_lock(&common->cc_lock);
 		ath_hw_cycle_counters_update(common);
-		memset(&common->cc_survey, 0, sizeof(common->cc_survey));
-		memset(&common->cc_ani, 0, sizeof(common->cc_ani));
+		memset(&common->cc, 0, sizeof(common->cc));
 		spin_unlock(&common->cc_lock);
 	}
 
-- 
2.43.0

[PATCH AUTOSEL 5.10 05/13] af_packet: avoid a false positive warning in packet_setsockopt()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 86d43e2bf93ccac88ef71cee36a23282ebd9e427 ]

Although the code is correct, the following line

	copy_from_sockptr(&req_u.req, optval, len));

triggers this warning :

memcpy: detected field-spanning write (size 28) of single field "dst" at include/linux/sockptr.h:49 (size 16)

Refactor the code to be more explicit.

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/packet/af_packet.c | 26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index db5d16c5d5b11..3ae11961c9cc3 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -3762,28 +3762,30 @@ packet_setsockopt(struct socket *sock, int level, int optname, sockptr_t optval,
 	case PACKET_TX_RING:
 	{
 		union tpacket_req_u req_u;
-		int len;
 
+		ret = -EINVAL;
 		lock_sock(sk);
 		switch (po->tp_version) {
 		case TPACKET_V1:
 		case TPACKET_V2:
-			len = sizeof(req_u.req);
+			if (optlen < sizeof(req_u.req))
+				break;
+			ret = copy_from_sockptr(&req_u.req, optval,
+						sizeof(req_u.req)) ?
+						-EINVAL : 0;
 			break;
 		case TPACKET_V3:
 		default:
-			len = sizeof(req_u.req3);
+			if (optlen < sizeof(req_u.req3))
+				break;
+			ret = copy_from_sockptr(&req_u.req3, optval,
+						sizeof(req_u.req3)) ?
+						-EINVAL : 0;
 			break;
 		}
-		if (optlen < len) {
-			ret = -EINVAL;
-		} else {
-			if (copy_from_sockptr(&req_u.req, optval, len))
-				ret = -EFAULT;
-			else
-				ret = packet_set_ring(sk, &req_u, 0,
-						    optname == PACKET_TX_RING);
-		}
+		if (!ret)
+			ret = packet_set_ring(sk, &req_u, 0,
+					      optname == PACKET_TX_RING);
 		release_sock(sk);
 		return ret;
 	}
-- 
2.43.0

[PATCH AUTOSEL 5.10 06/13] drop_monitor: replace spin_lock by raw_spin_lock

[Sasha Levin]

From: Wander Lairson Costa <wander@redhat.com>

[ Upstream commit f1e197a665c2148ebc25fe09c53689e60afea195 ]

trace_drop_common() is called with preemption disabled, and it acquires
a spin_lock. This is problematic for RT kernels because spin_locks are
sleeping locks in this configuration, which causes the following splat:

BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 449, name: rcuc/47
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 2
5 locks held by rcuc/47/449:
 #0: ff1100086ec30a60 ((softirq_ctrl.lock)){+.+.}-{2:2}, at: __local_bh_disable_ip+0x105/0x210
 #1: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0xbf/0x130
 #2: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: __local_bh_disable_ip+0x11c/0x210
 #3: ffffffffb394a160 (rcu_callback){....}-{0:0}, at: rcu_do_batch+0x360/0xc70
 #4: ff1100086ee07520 (&data->lock){+.+.}-{2:2}, at: trace_drop_common.constprop.0+0xb5/0x290
irq event stamp: 139909
hardirqs last  enabled at (139908): [<ffffffffb1df2b33>] _raw_spin_unlock_irqrestore+0x63/0x80
hardirqs last disabled at (139909): [<ffffffffb19bd03d>] trace_drop_common.constprop.0+0x26d/0x290
softirqs last  enabled at (139892): [<ffffffffb07a1083>] __local_bh_enable_ip+0x103/0x170
softirqs last disabled at (139898): [<ffffffffb0909b33>] rcu_cpu_kthread+0x93/0x1f0
Preemption disabled at:
[<ffffffffb1de786b>] rt_mutex_slowunlock+0xab/0x2e0
CPU: 47 PID: 449 Comm: rcuc/47 Not tainted 6.9.0-rc2-rt1+ #7
Hardware name: Dell Inc. PowerEdge R650/0Y2G81, BIOS 1.6.5 04/15/2022
Call Trace:
 <TASK>
 dump_stack_lvl+0x8c/0xd0
 dump_stack+0x14/0x20
 __might_resched+0x21e/0x2f0
 rt_spin_lock+0x5e/0x130
 ? trace_drop_common.constprop.0+0xb5/0x290
 ? skb_queue_purge_reason.part.0+0x1bf/0x230
 trace_drop_common.constprop.0+0xb5/0x290
 ? preempt_count_sub+0x1c/0xd0
 ? _raw_spin_unlock_irqrestore+0x4a/0x80
 ? __pfx_trace_drop_common.constprop.0+0x10/0x10
 ? rt_mutex_slowunlock+0x26a/0x2e0
 ? skb_queue_purge_reason.part.0+0x1bf/0x230
 ? __pfx_rt_mutex_slowunlock+0x10/0x10
 ? skb_queue_purge_reason.part.0+0x1bf/0x230
 trace_kfree_skb_hit+0x15/0x20
 trace_kfree_skb+0xe9/0x150
 kfree_skb_reason+0x7b/0x110
 skb_queue_purge_reason.part.0+0x1bf/0x230
 ? __pfx_skb_queue_purge_reason.part.0+0x10/0x10
 ? mark_lock.part.0+0x8a/0x520
...

trace_drop_common() also disables interrupts, but this is a minor issue
because we could easily replace it with a local_lock.

Replace the spin_lock with raw_spin_lock to avoid sleeping in atomic
context.

Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reported-by: Hu Chunyu <chuhu@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/drop_monitor.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index 7742ee689141f..009b9e22c4e75 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -73,7 +73,7 @@ struct net_dm_hw_entries {
 };
 
 struct per_cpu_dm_data {
-	spinlock_t		lock;	/* Protects 'skb', 'hw_entries' and
+	raw_spinlock_t		lock;	/* Protects 'skb', 'hw_entries' and
 					 * 'send_timer'
 					 */
 	union {
@@ -168,9 +168,9 @@ static struct sk_buff *reset_per_cpu_data(struct per_cpu_dm_data *data)
 err:
 	mod_timer(&data->send_timer, jiffies + HZ / 10);
 out:
-	spin_lock_irqsave(&data->lock, flags);
+	raw_spin_lock_irqsave(&data->lock, flags);
 	swap(data->skb, skb);
-	spin_unlock_irqrestore(&data->lock, flags);
+	raw_spin_unlock_irqrestore(&data->lock, flags);
 
 	if (skb) {
 		struct nlmsghdr *nlh = (struct nlmsghdr *)skb->data;
@@ -225,7 +225,7 @@ static void trace_drop_common(struct sk_buff *skb, void *location)
 
 	local_irq_save(flags);
 	data = this_cpu_ptr(&dm_cpu_data);
-	spin_lock(&data->lock);
+	raw_spin_lock(&data->lock);
 	dskb = data->skb;
 
 	if (!dskb)
@@ -259,7 +259,7 @@ static void trace_drop_common(struct sk_buff *skb, void *location)
 	}
 
 out:
-	spin_unlock_irqrestore(&data->lock, flags);
+	raw_spin_unlock_irqrestore(&data->lock, flags);
 }
 
 static void trace_kfree_skb_hit(void *ignore, struct sk_buff *skb, void *location)
@@ -318,9 +318,9 @@ net_dm_hw_reset_per_cpu_data(struct per_cpu_dm_data *hw_data)
 		mod_timer(&hw_data->send_timer, jiffies + HZ / 10);
 	}
 
-	spin_lock_irqsave(&hw_data->lock, flags);
+	raw_spin_lock_irqsave(&hw_data->lock, flags);
 	swap(hw_data->hw_entries, hw_entries);
-	spin_unlock_irqrestore(&hw_data->lock, flags);
+	raw_spin_unlock_irqrestore(&hw_data->lock, flags);
 
 	return hw_entries;
 }
@@ -452,7 +452,7 @@ net_dm_hw_trap_summary_probe(void *ignore, const struct devlink *devlink,
 		return;
 
 	hw_data = this_cpu_ptr(&dm_hw_cpu_data);
-	spin_lock_irqsave(&hw_data->lock, flags);
+	raw_spin_lock_irqsave(&hw_data->lock, flags);
 	hw_entries = hw_data->hw_entries;
 
 	if (!hw_entries)
@@ -481,7 +481,7 @@ net_dm_hw_trap_summary_probe(void *ignore, const struct devlink *devlink,
 	}
 
 out:
-	spin_unlock_irqrestore(&hw_data->lock, flags);
+	raw_spin_unlock_irqrestore(&hw_data->lock, flags);
 }
 
 static const struct net_dm_alert_ops net_dm_alert_summary_ops = {
@@ -1669,7 +1669,7 @@ static struct notifier_block dropmon_net_notifier = {
 
 static void __net_dm_cpu_data_init(struct per_cpu_dm_data *data)
 {
-	spin_lock_init(&data->lock);
+	raw_spin_lock_init(&data->lock);
 	skb_queue_head_init(&data->drop_queue);
 	u64_stats_init(&data->stats.syncp);
 }
-- 
2.43.0

[PATCH AUTOSEL 5.10 07/13] scsi: qedi: Fix crash while reading debugfs attribute

[Sasha Levin]

From: Manish Rangankar <mrangankar@marvell.com>

[ Upstream commit 28027ec8e32ecbadcd67623edb290dad61e735b5 ]

The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly
on a __user pointer, which results into the crash.

To fix this issue, use a small local stack buffer for sprintf() and then
call simple_read_from_buffer(), which in turns make the copy_to_user()
call.

BUG: unable to handle page fault for address: 00007f4801111000
PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0
Oops: 0002 [#1] PREEMPT SMP PTI
Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023
RIP: 0010:memcpy_orig+0xcd/0x130
RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202
RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f
RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000
RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572
R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff
R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af
FS:  00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 ? __die_body+0x1a/0x60
 ? page_fault_oops+0x183/0x510
 ? exc_page_fault+0x69/0x150
 ? asm_exc_page_fault+0x22/0x30
 ? memcpy_orig+0xcd/0x130
 vsnprintf+0x102/0x4c0
 sprintf+0x51/0x80
 qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324]
 full_proxy_read+0x50/0x80
 vfs_read+0xa5/0x2e0
 ? folio_add_new_anon_rmap+0x44/0xa0
 ? set_pte_at+0x15/0x30
 ? do_pte_missing+0x426/0x7f0
 ksys_read+0xa5/0xe0
 do_syscall_64+0x58/0x80
 ? __count_memcg_events+0x46/0x90
 ? count_memcg_event_mm+0x3d/0x60
 ? handle_mm_fault+0x196/0x2f0
 ? do_user_addr_fault+0x267/0x890
 ? exc_page_fault+0x69/0x150
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f4800f20b4d

Tested-by: Martin Hoyer <mhoyer@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Link: https://lore.kernel.org/r/20240415072155.30840-1-mrangankar@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedi/qedi_debugfs.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/qedi/qedi_debugfs.c b/drivers/scsi/qedi/qedi_debugfs.c
index 42f5afb60055c..6e724f47ab9e8 100644
--- a/drivers/scsi/qedi/qedi_debugfs.c
+++ b/drivers/scsi/qedi/qedi_debugfs.c
@@ -120,15 +120,11 @@ static ssize_t
 qedi_dbg_do_not_recover_cmd_read(struct file *filp, char __user *buffer,
 				 size_t count, loff_t *ppos)
 {
-	size_t cnt = 0;
-
-	if (*ppos)
-		return 0;
+	char buf[64];
+	int len;
 
-	cnt = sprintf(buffer, "do_not_recover=%d\n", qedi_do_not_recover);
-	cnt = min_t(int, count, cnt - *ppos);
-	*ppos += cnt;
-	return cnt;
+	len = sprintf(buf, "do_not_recover=%d\n", qedi_do_not_recover);
+	return simple_read_from_buffer(buffer, count, ppos, buf, len);
 }
 
 static int
-- 
2.43.0

[PATCH AUTOSEL 5.10 08/13] kselftest: arm64: Add a null pointer check

[Sasha Levin]

From: Kunwu Chan <chentao@kylinos.cn>

[ Upstream commit 80164282b3620a3cb73de6ffda5592743e448d0e ]

There is a 'malloc' call, which can be unsuccessful.
This patch will add the malloc failure checking
to avoid possible null dereference and give more information
about test fail reasons.

Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240423082102.2018886-1-chentao@kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/arm64/tags/tags_test.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/tools/testing/selftests/arm64/tags/tags_test.c b/tools/testing/selftests/arm64/tags/tags_test.c
index 5701163460ef7..955f87c1170d7 100644
--- a/tools/testing/selftests/arm64/tags/tags_test.c
+++ b/tools/testing/selftests/arm64/tags/tags_test.c
@@ -6,6 +6,7 @@
 #include <stdint.h>
 #include <sys/prctl.h>
 #include <sys/utsname.h>
+#include "../../kselftest.h"
 
 #define SHIFT_TAG(tag)		((uint64_t)(tag) << 56)
 #define SET_TAG(ptr, tag)	(((uint64_t)(ptr) & ~SHIFT_TAG(0xff)) | \
@@ -21,6 +22,9 @@ int main(void)
 	if (prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE, 0, 0, 0) == 0)
 		tbi_enabled = 1;
 	ptr = (struct utsname *)malloc(sizeof(*ptr));
+	if (!ptr)
+		ksft_exit_fail_msg("Failed to allocate utsname buffer\n");
+
 	if (tbi_enabled)
 		tag = 0x42;
 	ptr = (struct utsname *)SET_TAG(ptr, tag);
-- 
2.43.0

[PATCH AUTOSEL 5.10 08/13] kselftest: arm64: Add a null pointer check

[Sasha Levin]

From: Kunwu Chan <chentao@kylinos.cn>

[ Upstream commit 80164282b3620a3cb73de6ffda5592743e448d0e ]

There is a 'malloc' call, which can be unsuccessful.
This patch will add the malloc failure checking
to avoid possible null dereference and give more information
about test fail reasons.

Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240423082102.2018886-1-chentao@kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/arm64/tags/tags_test.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/tools/testing/selftests/arm64/tags/tags_test.c b/tools/testing/selftests/arm64/tags/tags_test.c
index 5701163460ef7..955f87c1170d7 100644
--- a/tools/testing/selftests/arm64/tags/tags_test.c
+++ b/tools/testing/selftests/arm64/tags/tags_test.c
@@ -6,6 +6,7 @@
 #include <stdint.h>
 #include <sys/prctl.h>
 #include <sys/utsname.h>
+#include "../../kselftest.h"
 
 #define SHIFT_TAG(tag)		((uint64_t)(tag) << 56)
 #define SET_TAG(ptr, tag)	(((uint64_t)(ptr) & ~SHIFT_TAG(0xff)) | \
@@ -21,6 +22,9 @@ int main(void)
 	if (prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE, 0, 0, 0) == 0)
 		tbi_enabled = 1;
 	ptr = (struct utsname *)malloc(sizeof(*ptr));
+	if (!ptr)
+		ksft_exit_fail_msg("Failed to allocate utsname buffer\n");
+
 	if (tbi_enabled)
 		tag = 0x42;
 	ptr = (struct utsname *)SET_TAG(ptr, tag);
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.10 09/13] netpoll: Fix race condition in netpoll_owner_active

[Sasha Levin]

From: Breno Leitao <leitao@debian.org>

[ Upstream commit c2e6a872bde9912f1a7579639c5ca3adf1003916 ]

KCSAN detected a race condition in netpoll:

	BUG: KCSAN: data-race in net_rx_action / netpoll_send_skb
	write (marked) to 0xffff8881164168b0 of 4 bytes by interrupt on cpu 10:
	net_rx_action (./include/linux/netpoll.h:90 net/core/dev.c:6712 net/core/dev.c:6822)
<snip>
	read to 0xffff8881164168b0 of 4 bytes by task 1 on cpu 2:
	netpoll_send_skb (net/core/netpoll.c:319 net/core/netpoll.c:345 net/core/netpoll.c:393)
	netpoll_send_udp (net/core/netpoll.c:?)
<snip>
	value changed: 0x0000000a -> 0xffffffff

This happens because netpoll_owner_active() needs to check if the
current CPU is the owner of the lock, touching napi->poll_owner
non atomically. The ->poll_owner field contains the current CPU holding
the lock.

Use an atomic read to check if the poll owner is the current CPU.

Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240429100437.3487432-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/netpoll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 2ad22511b9c6d..f76afab9fd8bd 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -316,7 +316,7 @@ static int netpoll_owner_active(struct net_device *dev)
 	struct napi_struct *napi;
 
 	list_for_each_entry_rcu(napi, &dev->napi_list, dev_list) {
-		if (napi->poll_owner == smp_processor_id())
+		if (READ_ONCE(napi->poll_owner) == smp_processor_id())
 			return 1;
 	}
 	return 0;
-- 
2.43.0

[PATCH AUTOSEL 5.10 10/13] HID: Add quirk for Logitech Casa touchpad

[Sasha Levin]

From: Sean O'Brien <seobrien@chromium.org>

[ Upstream commit dd2c345a94cfa3873cc20db87387ee509c345c1b ]

This device sometimes doesn't send touch release signals when moving
from >=4 fingers to <4 fingers. Using MT_QUIRK_NOT_SEEN_MEANS_UP instead
of MT_QUIRK_ALWAYS_VALID makes sure that no touches become stuck.

MT_QUIRK_FORCE_MULTI_INPUT is not necessary for this device, but does no
harm.

Signed-off-by: Sean O'Brien <seobrien@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h        | 1 +
 drivers/hid/hid-multitouch.c | 6 ++++++
 2 files changed, 7 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 0732fe6c7a853..9f3f7588fe46d 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -765,6 +765,7 @@
 #define USB_DEVICE_ID_LOGITECH_AUDIOHUB 0x0a0e
 #define USB_DEVICE_ID_LOGITECH_T651	0xb00c
 #define USB_DEVICE_ID_LOGITECH_DINOVO_EDGE_KBD	0xb309
+#define USB_DEVICE_ID_LOGITECH_CASA_TOUCHPAD	0xbb00
 #define USB_DEVICE_ID_LOGITECH_C007	0xc007
 #define USB_DEVICE_ID_LOGITECH_C077	0xc077
 #define USB_DEVICE_ID_LOGITECH_RECEIVER	0xc101
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 8dcd636daf270..e7b047421f3d9 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -1998,6 +1998,12 @@ static const struct hid_device_id mt_devices[] = {
 			   USB_VENDOR_ID_LENOVO,
 			   USB_DEVICE_ID_LENOVO_X12_TAB) },
 
+	/* Logitech devices */
+	{ .driver_data = MT_CLS_NSMU,
+		HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_MULTITOUCH_WIN_8,
+			USB_VENDOR_ID_LOGITECH,
+			USB_DEVICE_ID_LOGITECH_CASA_TOUCHPAD) },
+
 	/* MosArt panels */
 	{ .driver_data = MT_CLS_CONFIDENCE_MINUS_ONE,
 		MT_USB_DEVICE(USB_VENDOR_ID_ASUS,
-- 
2.43.0

[PATCH AUTOSEL 5.10 11/13] ACPI: video: Add backlight=native quirk for Lenovo Slim 7 16ARH7

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit c901f63dc142c48326931f164f787dfff69273d9 ]

Lenovo Slim 7 16ARH7 is a machine with switchable graphics between AMD
and Nvidia, and the backlight can't be adjusted properly unless
acpi_backlight=native is passed.  Although nvidia-wmi-backlight is
present and loaded, this doesn't work as expected at all.

For making it working as default, add the corresponding quirk entry
with a DMI matching "LENOVO" "82UX".

Link: https://bugzilla.suse.com/show_bug.cgi?id=1217750
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/video_detect.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index a5cb9e1d48bcc..338e1f44906a9 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -341,6 +341,14 @@ static const struct dmi_system_id video_detect_dmi_table[] = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "82BK"),
 		},
 	},
+	{
+	 .callback = video_detect_force_native,
+	 /* Lenovo Slim 7 16ARH7 */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "82UX"),
+		},
+	},
 	{
 	 .callback = video_detect_force_native,
 	 /* Lenovo ThinkPad X131e (3371 AMD version) */
-- 
2.43.0

[PATCH AUTOSEL 5.10 12/13] HID: bpf: add in-tree HID-BPF fix for the HP Elite Presenter Mouse

[Sasha Levin]

From: Benjamin Tissoires <bentiss@kernel.org>

[ Upstream commit 4e6d2a297dd5be26ad409b7a05b20bd033d1c95e ]

Duplicate of commit 0db117359e47 ("HID: add quirk for 03f0:464a HP Elite
Presenter Mouse"), but in a slightly better way.

This time we actually change the application collection, making clearer
for userspace what the second mouse is.

Note that having both hid-quirks fix and this HID-BPF fix is not a
problem at all.

Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-4-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../hid/bpf/progs/HP__Elite-Presenter.bpf.c   | 58 +++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 drivers/hid/bpf/progs/HP__Elite-Presenter.bpf.c

diff --git a/drivers/hid/bpf/progs/HP__Elite-Presenter.bpf.c b/drivers/hid/bpf/progs/HP__Elite-Presenter.bpf.c
new file mode 100644
index 0000000000000..3d14bbb6f2762
--- /dev/null
+++ b/drivers/hid/bpf/progs/HP__Elite-Presenter.bpf.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2023 Benjamin Tissoires
+ */
+
+#include "vmlinux.h"
+#include "hid_bpf.h"
+#include "hid_bpf_helpers.h"
+#include <bpf/bpf_tracing.h>
+
+#define VID_HP 0x03F0
+#define PID_ELITE_PRESENTER 0x464A
+
+HID_BPF_CONFIG(
+	HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_GENERIC, VID_HP, PID_ELITE_PRESENTER)
+);
+
+/*
+ * Already fixed as of commit 0db117359e47 ("HID: add quirk for 03f0:464a
+ * HP Elite Presenter Mouse") in the kernel, but this is a slightly better
+ * fix.
+ *
+ * The HP Elite Presenter Mouse HID Record Descriptor shows
+ * two mice (Report ID 0x1 and 0x2), one keypad (Report ID 0x5),
+ * two Consumer Controls (Report IDs 0x6 and 0x3).
+ * Prior to these fixes it registers one mouse, one keypad
+ * and one Consumer Control, and it was usable only as a
+ * digital laser pointer (one of the two mouses).
+ * We replace the second mouse collection with a pointer collection,
+ * allowing to use the device both as a mouse and a digital laser
+ * pointer.
+ */
+
+SEC("fmod_ret/hid_bpf_rdesc_fixup")
+int BPF_PROG(hid_fix_rdesc, struct hid_bpf_ctx *hctx)
+{
+	__u8 *data = hid_bpf_get_data(hctx, 0 /* offset */, 4096 /* size */);
+
+	if (!data)
+		return 0; /* EPERM check */
+
+	/* replace application mouse by application pointer on the second collection */
+	if (data[79] == 0x02)
+		data[79] = 0x01;
+
+	return 0;
+}
+
+SEC("syscall")
+int probe(struct hid_bpf_probe_args *ctx)
+{
+	ctx->retval = ctx->rdesc_size != 264;
+	if (ctx->retval)
+		ctx->retval = -EINVAL;
+
+	return 0;
+}
+
+char _license[] SEC("license") = "GPL";
-- 
2.43.0

[PATCH AUTOSEL 5.10 13/13] Bluetooth: ath3k: Fix multiple issues reported by checkpatch.pl

[Sasha Levin]

From: Uri Arev <me@wantyapps.xyz>

[ Upstream commit 68aa21054ec3a1a313af90a5f95ade16c3326d20 ]

This fixes some CHECKs reported by the checkpatch script.

Issues reported in ath3k.c:
-------
ath3k.c
-------
CHECK: Please don't use multiple blank lines
+
+

CHECK: Blank lines aren't necessary after an open brace '{'
+static const struct usb_device_id ath3k_blist_tbl[] = {
+

CHECK: Alignment should match open parenthesis
+static int ath3k_load_firmware(struct usb_device *udev,
+                               const struct firmware *firmware)

CHECK: Alignment should match open parenthesis
+               err = usb_bulk_msg(udev, pipe, send_buf, size,
+                                       &len, 3000);

CHECK: Unnecessary parentheses around 'len != size'
+               if (err || (len != size)) {

CHECK: Alignment should match open parenthesis
+static int ath3k_get_version(struct usb_device *udev,
+                       struct ath3k_version *version)

CHECK: Alignment should match open parenthesis
+static int ath3k_load_fwfile(struct usb_device *udev,
+               const struct firmware *firmware)

CHECK: Alignment should match open parenthesis
+               err = usb_bulk_msg(udev, pipe, send_buf, size,
+                                       &len, 3000);

CHECK: Unnecessary parentheses around 'len != size'
+               if (err || (len != size)) {

CHECK: Blank lines aren't necessary after an open brace '{'
+       switch (fw_version.ref_clock) {
+

CHECK: Alignment should match open parenthesis
+       snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
+               le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");

CHECK: Alignment should match open parenthesis
+static int ath3k_probe(struct usb_interface *intf,
+                       const struct usb_device_id *id)

CHECK: Alignment should match open parenthesis
+                       BT_ERR("Firmware file \"%s\" not found",
+                                                       ATH3K_FIRMWARE);

CHECK: Alignment should match open parenthesis
+               BT_ERR("Firmware file \"%s\" request failed (err=%d)",
+                                               ATH3K_FIRMWARE, ret);

total: 0 errors, 0 warnings, 14 checks, 540 lines checked

Signed-off-by: Uri Arev <me@wantyapps.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/ath3k.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 759d7828931d9..56ada48104f0e 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -3,7 +3,6 @@
  * Copyright (c) 2008-2009 Atheros Communications Inc.
  */
 
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -129,7 +128,6 @@ MODULE_DEVICE_TABLE(usb, ath3k_table);
  * for AR3012
  */
 static const struct usb_device_id ath3k_blist_tbl[] = {
-
 	/* Atheros AR3012 with sflash firmware*/
 	{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
@@ -203,7 +201,7 @@ static inline void ath3k_log_failed_loading(int err, int len, int size,
 #define TIMEGAP_USEC_MAX	100
 
 static int ath3k_load_firmware(struct usb_device *udev,
-				const struct firmware *firmware)
+			       const struct firmware *firmware)
 {
 	u8 *send_buf;
 	int len = 0;
@@ -238,9 +236,9 @@ static int ath3k_load_firmware(struct usb_device *udev,
 		memcpy(send_buf, firmware->data + sent, size);
 
 		err = usb_bulk_msg(udev, pipe, send_buf, size,
-					&len, 3000);
+				   &len, 3000);
 
-		if (err || (len != size)) {
+		if (err || len != size) {
 			ath3k_log_failed_loading(err, len, size, count);
 			goto error;
 		}
@@ -263,7 +261,7 @@ static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
 }
 
 static int ath3k_get_version(struct usb_device *udev,
-			struct ath3k_version *version)
+			     struct ath3k_version *version)
 {
 	return usb_control_msg_recv(udev, 0, ATH3K_GETVERSION,
 				    USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
@@ -272,7 +270,7 @@ static int ath3k_get_version(struct usb_device *udev,
 }
 
 static int ath3k_load_fwfile(struct usb_device *udev,
-		const struct firmware *firmware)
+			     const struct firmware *firmware)
 {
 	u8 *send_buf;
 	int len = 0;
@@ -311,8 +309,8 @@ static int ath3k_load_fwfile(struct usb_device *udev,
 		memcpy(send_buf, firmware->data + sent, size);
 
 		err = usb_bulk_msg(udev, pipe, send_buf, size,
-					&len, 3000);
-		if (err || (len != size)) {
+				   &len, 3000);
+		if (err || len != size) {
 			ath3k_log_failed_loading(err, len, size, count);
 			kfree(send_buf);
 			return err;
@@ -426,7 +424,6 @@ static int ath3k_load_syscfg(struct usb_device *udev)
 	}
 
 	switch (fw_version.ref_clock) {
-
 	case ATH3K_XTAL_FREQ_26M:
 		clk_value = 26;
 		break;
@@ -442,7 +439,7 @@ static int ath3k_load_syscfg(struct usb_device *udev)
 	}
 
 	snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
-		le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");
+		 le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");
 
 	ret = request_firmware(&firmware, filename, &udev->dev);
 	if (ret < 0) {
@@ -457,7 +454,7 @@ static int ath3k_load_syscfg(struct usb_device *udev)
 }
 
 static int ath3k_probe(struct usb_interface *intf,
-			const struct usb_device_id *id)
+		       const struct usb_device_id *id)
 {
 	const struct firmware *firmware;
 	struct usb_device *udev = interface_to_usbdev(intf);
@@ -506,10 +503,10 @@ static int ath3k_probe(struct usb_interface *intf,
 	if (ret < 0) {
 		if (ret == -ENOENT)
 			BT_ERR("Firmware file \"%s\" not found",
-							ATH3K_FIRMWARE);
+			       ATH3K_FIRMWARE);
 		else
 			BT_ERR("Firmware file \"%s\" request failed (err=%d)",
-							ATH3K_FIRMWARE, ret);
+			       ATH3K_FIRMWARE, ret);
 		return ret;
 	}
 
-- 
2.43.0

Re: [PATCH AUTOSEL 5.10 12/13] HID: bpf: add in-tree HID-BPF fix for the HP Elite Presenter Mouse

[Benjamin Tissoires]

On May 27 2024, Sasha Levin wrote:
> From: Benjamin Tissoires <bentiss@kernel.org>
> 
> [ Upstream commit 4e6d2a297dd5be26ad409b7a05b20bd033d1c95e ]
> 
> Duplicate of commit 0db117359e47 ("HID: add quirk for 03f0:464a HP Elite
> Presenter Mouse"), but in a slightly better way.
> 
> This time we actually change the application collection, making clearer
> for userspace what the second mouse is.
> 
> Note that having both hid-quirks fix and this HID-BPF fix is not a
> problem at all.

Please drop this patch in all backports (and FWIW, any fix in drivers/hid/bpf/progs/).

HID-BPF is only available since kernel v6.3, and the compilation output
of the in-tree file is not used directly, but shipped from udev-hid-bpf.

TL;DR: this just adds noise to those stable kernel trees.

Cheers,
Benjamin

> 
> Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-4-a8bf16033ef8@kernel.org
> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  .../hid/bpf/progs/HP__Elite-Presenter.bpf.c   | 58 +++++++++++++++++++
>  1 file changed, 58 insertions(+)
>  create mode 100644 drivers/hid/bpf/progs/HP__Elite-Presenter.bpf.c
> 
> diff --git a/drivers/hid/bpf/progs/HP__Elite-Presenter.bpf.c b/drivers/hid/bpf/progs/HP__Elite-Presenter.bpf.c
> new file mode 100644
> index 0000000000000..3d14bbb6f2762
> --- /dev/null
> +++ b/drivers/hid/bpf/progs/HP__Elite-Presenter.bpf.c
> @@ -0,0 +1,58 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/* Copyright (c) 2023 Benjamin Tissoires
> + */
> +
> +#include "vmlinux.h"
> +#include "hid_bpf.h"
> +#include "hid_bpf_helpers.h"
> +#include <bpf/bpf_tracing.h>
> +
> +#define VID_HP 0x03F0
> +#define PID_ELITE_PRESENTER 0x464A
> +
> +HID_BPF_CONFIG(
> +	HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_GENERIC, VID_HP, PID_ELITE_PRESENTER)
> +);
> +
> +/*
> + * Already fixed as of commit 0db117359e47 ("HID: add quirk for 03f0:464a
> + * HP Elite Presenter Mouse") in the kernel, but this is a slightly better
> + * fix.
> + *
> + * The HP Elite Presenter Mouse HID Record Descriptor shows
> + * two mice (Report ID 0x1 and 0x2), one keypad (Report ID 0x5),
> + * two Consumer Controls (Report IDs 0x6 and 0x3).
> + * Prior to these fixes it registers one mouse, one keypad
> + * and one Consumer Control, and it was usable only as a
> + * digital laser pointer (one of the two mouses).
> + * We replace the second mouse collection with a pointer collection,
> + * allowing to use the device both as a mouse and a digital laser
> + * pointer.
> + */
> +
> +SEC("fmod_ret/hid_bpf_rdesc_fixup")
> +int BPF_PROG(hid_fix_rdesc, struct hid_bpf_ctx *hctx)
> +{
> +	__u8 *data = hid_bpf_get_data(hctx, 0 /* offset */, 4096 /* size */);
> +
> +	if (!data)
> +		return 0; /* EPERM check */
> +
> +	/* replace application mouse by application pointer on the second collection */
> +	if (data[79] == 0x02)
> +		data[79] = 0x01;
> +
> +	return 0;
> +}
> +
> +SEC("syscall")
> +int probe(struct hid_bpf_probe_args *ctx)
> +{
> +	ctx->retval = ctx->rdesc_size != 264;
> +	if (ctx->retval)
> +		ctx->retval = -EINVAL;
> +
> +	return 0;
> +}
> +
> +char _license[] SEC("license") = "GPL";
> -- 
> 2.43.0
>