[PATCH v3 0/2] ASoC: fsl_xcvr: Support i.MX95 platform

[PATCH v3 0/2] ASoC: fsl_xcvr: Support i.MX95 platform

[Shengjiu Wang]

On i.MX95 wakeup domain, there is one instance of Audio XCVR
supporting SPDIF mode with a connection to the Audio XCVR physical
interface.

changes in v3:
- refine the constraint for 'resets', 'clocks', 'interrupts' in document.

changes in v2:
- Merge patch 1&2, 3&4 from v1 together.
- Add more comments in commit message
- Add constaint for clocks used on i.mx95
- Add 'select SND_SOC_FSL_UTILS' for compiling issue.

Shengjiu Wang (2):
  ASoC: dt-bindings: fsl,xcvr: Add compatible string for i.MX95
  ASoC: fsl_xcvr: Add support for i.MX95 platform

 .../devicetree/bindings/sound/fsl,xcvr.yaml   |  37 ++++-
 sound/soc/fsl/Kconfig                         |   1 +
 sound/soc/fsl/fsl_xcvr.c                      | 128 ++++++++++++------
 sound/soc/fsl/fsl_xcvr.h                      |  91 +++++++++++++
 4 files changed, 213 insertions(+), 44 deletions(-)

-- 
2.34.1

[PATCH v3 1/2] ASoC: dt-bindings: fsl,xcvr: Add compatible string for i.MX95

[Shengjiu Wang]

Add compatible string "fsl,imx95-xcvr" for i.MX95 platform.

The difference between each platform is in below table.

+---------+--------+----------+--------+
|  SOC	  |  PHY   | eARC/ARC | SPDIF  |
+---------+--------+----------+--------+
| i.MX8MP |  V1    |  Yes     |  Yes   |
+---------+--------+----------+--------+
| i.MX93  |  N/A   |  N/A     |  Yes   |
+---------+--------+----------+--------+
| i.MX95  |  V2    |  N/A     |  Yes   |
+---------+--------+----------+--------+

On i.MX95, there are two PLL clock sources, they are the parent
clocks of the XCVR root clock. one is for 8kHz series rates, named
as 'pll8k', another one is for 11kHz series rates, named as 'pll11k'.
They are optional clocks, if there are such clocks, then the driver
can switch between them to support more accurate sample rates.

As 'pll8k' and 'pll11k' are optional, then add 'minItems: 4' for
clocks and clock-names properties.

On i.MX95, the 'interrupts' configuration has the same constraint
as i.MX93.

Only on i.MX8MP, the 'resets' is required, but for i.MX95 and i.MX93
there is no such hardware setting.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 .../devicetree/bindings/sound/fsl,xcvr.yaml   | 37 ++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
index 0eb0c1ba8710..d1dcc27655eb 100644
--- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
@@ -22,6 +22,7 @@ properties:
     enum:
       - fsl,imx8mp-xcvr
       - fsl,imx93-xcvr
+      - fsl,imx95-xcvr
 
   reg:
     items:
@@ -49,6 +50,9 @@ properties:
       - description: PHY clock
       - description: SPBA clock
       - description: PLL clock
+      - description: PLL clock source for 8kHz series
+      - description: PLL clock source for 11kHz series
+    minItems: 4
 
   clock-names:
     items:
@@ -56,6 +60,9 @@ properties:
       - const: phy
       - const: spba
       - const: pll_ipg
+      - const: pll8k
+      - const: pll11k
+    minItems: 4
 
   dmas:
     items:
@@ -79,15 +86,24 @@ required:
   - clock-names
   - dmas
   - dma-names
-  - resets
 
 allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mp-xcvr
+    then:
+      required:
+        - resets
+
   - if:
       properties:
         compatible:
           contains:
             enum:
               - fsl,imx93-xcvr
+              - fsl,imx95-xcvr
     then:
       properties:
         interrupts:
@@ -98,6 +114,25 @@ allOf:
         interrupts:
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx95-xcvr
+    then:
+      properties:
+        clocks:
+          maxItems: 6
+        clock-names:
+          maxItems: 6
+    else:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          maxItems: 4
+
 additionalProperties: false
 
 examples:
-- 
2.34.1

Re: [PATCH v3 1/2] ASoC: dt-bindings: fsl,xcvr: Add compatible string for i.MX95

[Rob Herring]

On Tue, May 21, 2024 at 06:13:35PM +0800, Shengjiu Wang wrote:
> Add compatible string "fsl,imx95-xcvr" for i.MX95 platform.
> 
> The difference between each platform is in below table.
> 
> +---------+--------+----------+--------+
> |  SOC	  |  PHY   | eARC/ARC | SPDIF  |
> +---------+--------+----------+--------+
> | i.MX8MP |  V1    |  Yes     |  Yes   |
> +---------+--------+----------+--------+
> | i.MX93  |  N/A   |  N/A     |  Yes   |
> +---------+--------+----------+--------+
> | i.MX95  |  V2    |  N/A     |  Yes   |
> +---------+--------+----------+--------+
> 
> On i.MX95, there are two PLL clock sources, they are the parent
> clocks of the XCVR root clock. one is for 8kHz series rates, named
> as 'pll8k', another one is for 11kHz series rates, named as 'pll11k'.
> They are optional clocks, if there are such clocks, then the driver
> can switch between them to support more accurate sample rates.
> 
> As 'pll8k' and 'pll11k' are optional, then add 'minItems: 4' for
> clocks and clock-names properties.
> 
> On i.MX95, the 'interrupts' configuration has the same constraint
> as i.MX93.
> 
> Only on i.MX8MP, the 'resets' is required, but for i.MX95 and i.MX93
> there is no such hardware setting.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> ---
>  .../devicetree/bindings/sound/fsl,xcvr.yaml   | 37 ++++++++++++++++++-
>  1 file changed, 36 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
> index 0eb0c1ba8710..d1dcc27655eb 100644
> --- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
> +++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
> @@ -22,6 +22,7 @@ properties:
>      enum:
>        - fsl,imx8mp-xcvr
>        - fsl,imx93-xcvr
> +      - fsl,imx95-xcvr
>  
>    reg:
>      items:
> @@ -49,6 +50,9 @@ properties:
>        - description: PHY clock
>        - description: SPBA clock
>        - description: PLL clock
> +      - description: PLL clock source for 8kHz series
> +      - description: PLL clock source for 11kHz series
> +    minItems: 4
>  
>    clock-names:
>      items:
> @@ -56,6 +60,9 @@ properties:
>        - const: phy
>        - const: spba
>        - const: pll_ipg
> +      - const: pll8k
> +      - const: pll11k
> +    minItems: 4
>  
>    dmas:
>      items:
> @@ -79,15 +86,24 @@ required:
>    - clock-names
>    - dmas
>    - dma-names
> -  - resets
>  
>  allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: fsl,imx8mp-xcvr
> +    then:
> +      required:
> +        - resets
> +
>    - if:
>        properties:
>          compatible:
>            contains:
>              enum:
>                - fsl,imx93-xcvr
> +              - fsl,imx95-xcvr
>      then:
>        properties:
>          interrupts:
> @@ -98,6 +114,25 @@ allOf:
>          interrupts:
>            maxItems: 1
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx95-xcvr
> +    then:
> +      properties:
> +        clocks:
> +          maxItems: 6
> +        clock-names:
> +          maxItems: 6

6 is already the max. Drop these and add a 'not' into the if schema (or 
list out the other compatibles).

> +    else:
> +      properties:
> +        clocks:
> +          maxItems: 4
> +        clock-names:
> +          maxItems: 4
> +
>  additionalProperties: false
>  
>  examples:
> -- 
> 2.34.1
> 

Re: [PATCH v3 1/2] ASoC: dt-bindings: fsl,xcvr: Add compatible string for i.MX95

[Rob Herring]

On Tue, May 21, 2024 at 06:13:35PM +0800, Shengjiu Wang wrote:
> Add compatible string "fsl,imx95-xcvr" for i.MX95 platform.
> 
> The difference between each platform is in below table.
> 
> +---------+--------+----------+--------+
> |  SOC	  |  PHY   | eARC/ARC | SPDIF  |
> +---------+--------+----------+--------+
> | i.MX8MP |  V1    |  Yes     |  Yes   |
> +---------+--------+----------+--------+
> | i.MX93  |  N/A   |  N/A     |  Yes   |
> +---------+--------+----------+--------+
> | i.MX95  |  V2    |  N/A     |  Yes   |
> +---------+--------+----------+--------+
> 
> On i.MX95, there are two PLL clock sources, they are the parent
> clocks of the XCVR root clock. one is for 8kHz series rates, named
> as 'pll8k', another one is for 11kHz series rates, named as 'pll11k'.
> They are optional clocks, if there are such clocks, then the driver
> can switch between them to support more accurate sample rates.
> 
> As 'pll8k' and 'pll11k' are optional, then add 'minItems: 4' for
> clocks and clock-names properties.
> 
> On i.MX95, the 'interrupts' configuration has the same constraint
> as i.MX93.
> 
> Only on i.MX8MP, the 'resets' is required, but for i.MX95 and i.MX93
> there is no such hardware setting.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> ---
>  .../devicetree/bindings/sound/fsl,xcvr.yaml   | 37 ++++++++++++++++++-
>  1 file changed, 36 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
> index 0eb0c1ba8710..d1dcc27655eb 100644
> --- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
> +++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
> @@ -22,6 +22,7 @@ properties:
>      enum:
>        - fsl,imx8mp-xcvr
>        - fsl,imx93-xcvr
> +      - fsl,imx95-xcvr
>  
>    reg:
>      items:
> @@ -49,6 +50,9 @@ properties:
>        - description: PHY clock
>        - description: SPBA clock
>        - description: PLL clock
> +      - description: PLL clock source for 8kHz series
> +      - description: PLL clock source for 11kHz series
> +    minItems: 4
>  
>    clock-names:
>      items:
> @@ -56,6 +60,9 @@ properties:
>        - const: phy
>        - const: spba
>        - const: pll_ipg
> +      - const: pll8k
> +      - const: pll11k
> +    minItems: 4
>  
>    dmas:
>      items:
> @@ -79,15 +86,24 @@ required:
>    - clock-names
>    - dmas
>    - dma-names
> -  - resets
>  
>  allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: fsl,imx8mp-xcvr
> +    then:
> +      required:
> +        - resets
> +
>    - if:
>        properties:
>          compatible:
>            contains:
>              enum:
>                - fsl,imx93-xcvr
> +              - fsl,imx95-xcvr
>      then:
>        properties:
>          interrupts:
> @@ -98,6 +114,25 @@ allOf:
>          interrupts:
>            maxItems: 1
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx95-xcvr
> +    then:
> +      properties:
> +        clocks:
> +          maxItems: 6
> +        clock-names:
> +          maxItems: 6

6 is already the max. Drop these and add a 'not' into the if schema (or 
list out the other compatibles).

> +    else:
> +      properties:
> +        clocks:
> +          maxItems: 4
> +        clock-names:
> +          maxItems: 4
> +
>  additionalProperties: false
>  
>  examples:
> -- 
> 2.34.1
> 

Re: [PATCH v3 1/2] ASoC: dt-bindings: fsl,xcvr: Add compatible string for i.MX95

[Shengjiu Wang]

On Tue, May 28, 2024 at 11:15 PM Rob Herring <robh@kernel.org> wrote:
>
> On Tue, May 21, 2024 at 06:13:35PM +0800, Shengjiu Wang wrote:
> > Add compatible string "fsl,imx95-xcvr" for i.MX95 platform.
> >
> > The difference between each platform is in below table.
> >
> > +---------+--------+----------+--------+
> > |  SOC          |  PHY   | eARC/ARC | SPDIF  |
> > +---------+--------+----------+--------+
> > | i.MX8MP |  V1    |  Yes     |  Yes   |
> > +---------+--------+----------+--------+
> > | i.MX93  |  N/A   |  N/A     |  Yes   |
> > +---------+--------+----------+--------+
> > | i.MX95  |  V2    |  N/A     |  Yes   |
> > +---------+--------+----------+--------+
> >
> > On i.MX95, there are two PLL clock sources, they are the parent
> > clocks of the XCVR root clock. one is for 8kHz series rates, named
> > as 'pll8k', another one is for 11kHz series rates, named as 'pll11k'.
> > They are optional clocks, if there are such clocks, then the driver
> > can switch between them to support more accurate sample rates.
> >
> > As 'pll8k' and 'pll11k' are optional, then add 'minItems: 4' for
> > clocks and clock-names properties.
> >
> > On i.MX95, the 'interrupts' configuration has the same constraint
> > as i.MX93.
> >
> > Only on i.MX8MP, the 'resets' is required, but for i.MX95 and i.MX93
> > there is no such hardware setting.
> >
> > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> > ---
> >  .../devicetree/bindings/sound/fsl,xcvr.yaml   | 37 ++++++++++++++++++-
> >  1 file changed, 36 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
> > index 0eb0c1ba8710..d1dcc27655eb 100644
> > --- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
> > +++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
> > @@ -22,6 +22,7 @@ properties:
> >      enum:
> >        - fsl,imx8mp-xcvr
> >        - fsl,imx93-xcvr
> > +      - fsl,imx95-xcvr
> >
> >    reg:
> >      items:
> > @@ -49,6 +50,9 @@ properties:
> >        - description: PHY clock
> >        - description: SPBA clock
> >        - description: PLL clock
> > +      - description: PLL clock source for 8kHz series
> > +      - description: PLL clock source for 11kHz series
> > +    minItems: 4
> >
> >    clock-names:
> >      items:
> > @@ -56,6 +60,9 @@ properties:
> >        - const: phy
> >        - const: spba
> >        - const: pll_ipg
> > +      - const: pll8k
> > +      - const: pll11k
> > +    minItems: 4
> >
> >    dmas:
> >      items:
> > @@ -79,15 +86,24 @@ required:
> >    - clock-names
> >    - dmas
> >    - dma-names
> > -  - resets
> >
> >  allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: fsl,imx8mp-xcvr
> > +    then:
> > +      required:
> > +        - resets
> > +
> >    - if:
> >        properties:
> >          compatible:
> >            contains:
> >              enum:
> >                - fsl,imx93-xcvr
> > +              - fsl,imx95-xcvr
> >      then:
> >        properties:
> >          interrupts:
> > @@ -98,6 +114,25 @@ allOf:
> >          interrupts:
> >            maxItems: 1
> >
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - fsl,imx95-xcvr
> > +    then:
> > +      properties:
> > +        clocks:
> > +          maxItems: 6
> > +        clock-names:
> > +          maxItems: 6
>
> 6 is already the max. Drop these and add a 'not' into the if schema (or
> list out the other compatibles).

Ok, will update it.

best regards
Shengjiu Wang
>
> > +    else:
> > +      properties:
> > +        clocks:
> > +          maxItems: 4
> > +        clock-names:
> > +          maxItems: 4
> > +
> >  additionalProperties: false
> >
> >  examples:
> > --
> > 2.34.1
> >

Re: [PATCH v3 1/2] ASoC: dt-bindings: fsl,xcvr: Add compatible string for i.MX95

[Shengjiu Wang]

On Tue, May 28, 2024 at 11:15 PM Rob Herring <robh@kernel.org> wrote:
>
> On Tue, May 21, 2024 at 06:13:35PM +0800, Shengjiu Wang wrote:
> > Add compatible string "fsl,imx95-xcvr" for i.MX95 platform.
> >
> > The difference between each platform is in below table.
> >
> > +---------+--------+----------+--------+
> > |  SOC          |  PHY   | eARC/ARC | SPDIF  |
> > +---------+--------+----------+--------+
> > | i.MX8MP |  V1    |  Yes     |  Yes   |
> > +---------+--------+----------+--------+
> > | i.MX93  |  N/A   |  N/A     |  Yes   |
> > +---------+--------+----------+--------+
> > | i.MX95  |  V2    |  N/A     |  Yes   |
> > +---------+--------+----------+--------+
> >
> > On i.MX95, there are two PLL clock sources, they are the parent
> > clocks of the XCVR root clock. one is for 8kHz series rates, named
> > as 'pll8k', another one is for 11kHz series rates, named as 'pll11k'.
> > They are optional clocks, if there are such clocks, then the driver
> > can switch between them to support more accurate sample rates.
> >
> > As 'pll8k' and 'pll11k' are optional, then add 'minItems: 4' for
> > clocks and clock-names properties.
> >
> > On i.MX95, the 'interrupts' configuration has the same constraint
> > as i.MX93.
> >
> > Only on i.MX8MP, the 'resets' is required, but for i.MX95 and i.MX93
> > there is no such hardware setting.
> >
> > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> > ---
> >  .../devicetree/bindings/sound/fsl,xcvr.yaml   | 37 ++++++++++++++++++-
> >  1 file changed, 36 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
> > index 0eb0c1ba8710..d1dcc27655eb 100644
> > --- a/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
> > +++ b/Documentation/devicetree/bindings/sound/fsl,xcvr.yaml
> > @@ -22,6 +22,7 @@ properties:
> >      enum:
> >        - fsl,imx8mp-xcvr
> >        - fsl,imx93-xcvr
> > +      - fsl,imx95-xcvr
> >
> >    reg:
> >      items:
> > @@ -49,6 +50,9 @@ properties:
> >        - description: PHY clock
> >        - description: SPBA clock
> >        - description: PLL clock
> > +      - description: PLL clock source for 8kHz series
> > +      - description: PLL clock source for 11kHz series
> > +    minItems: 4
> >
> >    clock-names:
> >      items:
> > @@ -56,6 +60,9 @@ properties:
> >        - const: phy
> >        - const: spba
> >        - const: pll_ipg
> > +      - const: pll8k
> > +      - const: pll11k
> > +    minItems: 4
> >
> >    dmas:
> >      items:
> > @@ -79,15 +86,24 @@ required:
> >    - clock-names
> >    - dmas
> >    - dma-names
> > -  - resets
> >
> >  allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: fsl,imx8mp-xcvr
> > +    then:
> > +      required:
> > +        - resets
> > +
> >    - if:
> >        properties:
> >          compatible:
> >            contains:
> >              enum:
> >                - fsl,imx93-xcvr
> > +              - fsl,imx95-xcvr
> >      then:
> >        properties:
> >          interrupts:
> > @@ -98,6 +114,25 @@ allOf:
> >          interrupts:
> >            maxItems: 1
> >
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - fsl,imx95-xcvr
> > +    then:
> > +      properties:
> > +        clocks:
> > +          maxItems: 6
> > +        clock-names:
> > +          maxItems: 6
>
> 6 is already the max. Drop these and add a 'not' into the if schema (or
> list out the other compatibles).

Ok, will update it.

best regards
Shengjiu Wang
>
> > +    else:
> > +      properties:
> > +        clocks:
> > +          maxItems: 4
> > +        clock-names:
> > +          maxItems: 4
> > +
> >  additionalProperties: false
> >
> >  examples:
> > --
> > 2.34.1
> >

[PATCH v3 2/2] ASoC: fsl_xcvr: Add support for i.MX95 platform

[Shengjiu Wang]

On i.MX95, the XCVR uses a new PLL in the PHY, which is
General Purpose (GP) PLL. Add GP PLL configuration support
in the driver and add the 'pll_ver' flag to distinguish
different PLL on different platforms.

The XCVR also use PHY but limited for SPDIF only case
Add 'use_phy' flag to distinguish these platforms.

When there are 'pll8k' and 'pll11k' clock existing, the clock
source of 'phy_clk' can be changed for different sample rate
requirement.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Chancel Liu <chancel.liu@nxp.com>
---
 sound/soc/fsl/Kconfig    |   1 +
 sound/soc/fsl/fsl_xcvr.c | 128 ++++++++++++++++++++++++++-------------
 sound/soc/fsl/fsl_xcvr.h |  91 ++++++++++++++++++++++++++++
 3 files changed, 177 insertions(+), 43 deletions(-)

diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 270726c134b3..9a371d4496c2 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -103,6 +103,7 @@ config SND_SOC_FSL_XCVR
 	select REGMAP_MMIO
 	select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
 	select SND_SOC_GENERIC_DMAENGINE_PCM
+	select SND_SOC_FSL_UTILS
 	help
 	  Say Y if you want to add Audio Transceiver (XCVR) support for NXP
 	  iMX CPUs. XCVR is a digital module that supports HDMI2.1 eARC,
diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c
index c46f64557a7f..6b1715ac67c5 100644
--- a/sound/soc/fsl/fsl_xcvr.c
+++ b/sound/soc/fsl/fsl_xcvr.c
@@ -15,14 +15,22 @@
 #include <sound/pcm_params.h>
 
 #include "fsl_xcvr.h"
+#include "fsl_utils.h"
 #include "imx-pcm.h"
 
 #define FSL_XCVR_CAPDS_SIZE	256
 
+enum fsl_xcvr_pll_verison {
+	PLL_MX8MP,
+	PLL_MX95,
+};
+
 struct fsl_xcvr_soc_data {
 	const char *fw_name;
 	bool spdif_only;
 	bool use_edma;
+	bool use_phy;
+	enum fsl_xcvr_pll_verison pll_ver;
 };
 
 struct fsl_xcvr {
@@ -33,6 +41,8 @@ struct fsl_xcvr {
 	struct clk *pll_ipg_clk;
 	struct clk *phy_clk;
 	struct clk *spba_clk;
+	struct clk *pll8k_clk;
+	struct clk *pll11k_clk;
 	struct reset_control *reset;
 	u8 streams;
 	u32 mode;
@@ -262,10 +272,10 @@ static int fsl_xcvr_ai_write(struct fsl_xcvr *xcvr, u8 reg, u32 data, bool phy)
 static int fsl_xcvr_en_phy_pll(struct fsl_xcvr *xcvr, u32 freq, bool tx)
 {
 	struct device *dev = &xcvr->pdev->dev;
-	u32 i, div = 0, log2;
+	u32 i, div = 0, log2, val;
 	int ret;
 
-	if (xcvr->soc_data->spdif_only)
+	if (!xcvr->soc_data->use_phy)
 		return 0;
 
 	for (i = 0; i < ARRAY_SIZE(fsl_xcvr_pll_cfg); i++) {
@@ -288,45 +298,62 @@ static int fsl_xcvr_en_phy_pll(struct fsl_xcvr *xcvr, u32 freq, bool tx)
 		return ret;
 	}
 
-	/* PLL: BANDGAP_SET: EN_VBG (enable bandgap) */
-	fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_BANDGAP_SET,
-			  FSL_XCVR_PLL_BANDGAP_EN_VBG, 0);
-
-	/* PLL: CTRL0: DIV_INTEGER */
-	fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0, fsl_xcvr_pll_cfg[i].mfi, 0);
-	/* PLL: NUMERATOR: MFN */
-	fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_NUM, fsl_xcvr_pll_cfg[i].mfn, 0);
-	/* PLL: DENOMINATOR: MFD */
-	fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_DEN, fsl_xcvr_pll_cfg[i].mfd, 0);
-	/* PLL: CTRL0_SET: HOLD_RING_OFF, POWER_UP */
-	fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET,
-			  FSL_XCVR_PLL_CTRL0_HROFF | FSL_XCVR_PLL_CTRL0_PWP, 0);
-	udelay(25);
-	/* PLL: CTRL0: Clear Hold Ring Off */
-	fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_CLR,
-			  FSL_XCVR_PLL_CTRL0_HROFF, 0);
-	udelay(100);
-	if (tx) { /* TX is enabled for SPDIF only */
-		/* PLL: POSTDIV: PDIV0 */
-		fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV,
-				  FSL_XCVR_PLL_PDIVx(log2, 0), 0);
-		/* PLL: CTRL_SET: CLKMUX0_EN */
-		fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET,
-				  FSL_XCVR_PLL_CTRL0_CM0_EN, 0);
-	} else if (xcvr->mode == FSL_XCVR_MODE_EARC) { /* eARC RX */
-		/* PLL: POSTDIV: PDIV1 */
-		fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV,
-				  FSL_XCVR_PLL_PDIVx(log2, 1), 0);
-		/* PLL: CTRL_SET: CLKMUX1_EN */
-		fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET,
-				  FSL_XCVR_PLL_CTRL0_CM1_EN, 0);
-	} else { /* SPDIF / ARC RX */
-		/* PLL: POSTDIV: PDIV2 */
-		fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV,
-				  FSL_XCVR_PLL_PDIVx(log2, 2), 0);
-		/* PLL: CTRL_SET: CLKMUX2_EN */
+	switch (xcvr->soc_data->pll_ver) {
+	case PLL_MX8MP:
+		/* PLL: BANDGAP_SET: EN_VBG (enable bandgap) */
+		fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_BANDGAP_SET,
+				  FSL_XCVR_PLL_BANDGAP_EN_VBG, 0);
+
+		/* PLL: CTRL0: DIV_INTEGER */
+		fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0, fsl_xcvr_pll_cfg[i].mfi, 0);
+		/* PLL: NUMERATOR: MFN */
+		fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_NUM, fsl_xcvr_pll_cfg[i].mfn, 0);
+		/* PLL: DENOMINATOR: MFD */
+		fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_DEN, fsl_xcvr_pll_cfg[i].mfd, 0);
+		/* PLL: CTRL0_SET: HOLD_RING_OFF, POWER_UP */
 		fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET,
-				  FSL_XCVR_PLL_CTRL0_CM2_EN, 0);
+				  FSL_XCVR_PLL_CTRL0_HROFF | FSL_XCVR_PLL_CTRL0_PWP, 0);
+		udelay(25);
+		/* PLL: CTRL0: Clear Hold Ring Off */
+		fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_CLR,
+				  FSL_XCVR_PLL_CTRL0_HROFF, 0);
+		udelay(100);
+		if (tx) { /* TX is enabled for SPDIF only */
+			/* PLL: POSTDIV: PDIV0 */
+			fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV,
+					  FSL_XCVR_PLL_PDIVx(log2, 0), 0);
+			/* PLL: CTRL_SET: CLKMUX0_EN */
+			fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET,
+					  FSL_XCVR_PLL_CTRL0_CM0_EN, 0);
+		} else if (xcvr->mode == FSL_XCVR_MODE_EARC) { /* eARC RX */
+			/* PLL: POSTDIV: PDIV1 */
+			fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV,
+					  FSL_XCVR_PLL_PDIVx(log2, 1), 0);
+			/* PLL: CTRL_SET: CLKMUX1_EN */
+			fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET,
+					  FSL_XCVR_PLL_CTRL0_CM1_EN, 0);
+		} else { /* SPDIF / ARC RX */
+			/* PLL: POSTDIV: PDIV2 */
+			fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_PDIV,
+					  FSL_XCVR_PLL_PDIVx(log2, 2), 0);
+			/* PLL: CTRL_SET: CLKMUX2_EN */
+			fsl_xcvr_ai_write(xcvr, FSL_XCVR_PLL_CTRL0_SET,
+					  FSL_XCVR_PLL_CTRL0_CM2_EN, 0);
+		}
+		break;
+	case PLL_MX95:
+		val = fsl_xcvr_pll_cfg[i].mfi << FSL_XCVR_GP_PLL_DIV_MFI_SHIFT | div;
+		fsl_xcvr_ai_write(xcvr, FSL_XCVR_GP_PLL_DIV, val, 0);
+		val = fsl_xcvr_pll_cfg[i].mfn << FSL_XCVR_GP_PLL_NUMERATOR_MFN_SHIFT;
+		fsl_xcvr_ai_write(xcvr, FSL_XCVR_GP_PLL_NUMERATOR, val, 0);
+		fsl_xcvr_ai_write(xcvr, FSL_XCVR_GP_PLL_DENOMINATOR,
+				  fsl_xcvr_pll_cfg[i].mfd, 0);
+		val = FSL_XCVR_GP_PLL_CTRL_POWERUP | FSL_XCVR_GP_PLL_CTRL_CLKMUX_EN;
+		fsl_xcvr_ai_write(xcvr, FSL_XCVR_GP_PLL_CTRL, val, 0);
+		break;
+	default:
+		dev_err(dev, "Error for PLL version %d\n", xcvr->soc_data->pll_ver);
+		return -EINVAL;
 	}
 
 	if (xcvr->mode == FSL_XCVR_MODE_EARC) { /* eARC mode */
@@ -362,6 +389,8 @@ static int fsl_xcvr_en_aud_pll(struct fsl_xcvr *xcvr, u32 freq)
 
 	freq = xcvr->soc_data->spdif_only ? freq / 5 : freq;
 	clk_disable_unprepare(xcvr->phy_clk);
+	fsl_asoc_reparent_pll_clocks(dev, xcvr->phy_clk,
+				     xcvr->pll8k_clk, xcvr->pll11k_clk, freq);
 	ret = clk_set_rate(xcvr->phy_clk, freq);
 	if (ret < 0) {
 		dev_err(dev, "Error while setting AUD PLL rate: %d\n", ret);
@@ -373,7 +402,7 @@ static int fsl_xcvr_en_aud_pll(struct fsl_xcvr *xcvr, u32 freq)
 		return ret;
 	}
 
-	if (xcvr->soc_data->spdif_only)
+	if (!xcvr->soc_data->use_phy)
 		return 0;
 	/* Release AI interface from reset */
 	ret = regmap_write(xcvr->regmap, FSL_XCVR_PHY_AI_CTRL_SET,
@@ -1017,7 +1046,7 @@ static bool fsl_xcvr_readable_reg(struct device *dev, unsigned int reg)
 {
 	struct fsl_xcvr *xcvr = dev_get_drvdata(dev);
 
-	if (xcvr->soc_data->spdif_only)
+	if (!xcvr->soc_data->use_phy)
 		if ((reg >= FSL_XCVR_IER && reg <= FSL_XCVR_PHY_AI_RDATA) ||
 		    reg > FSL_XCVR_TX_DPTH_BCRR)
 			return false;
@@ -1090,7 +1119,7 @@ static bool fsl_xcvr_writeable_reg(struct device *dev, unsigned int reg)
 {
 	struct fsl_xcvr *xcvr = dev_get_drvdata(dev);
 
-	if (xcvr->soc_data->spdif_only)
+	if (!xcvr->soc_data->use_phy)
 		if (reg >= FSL_XCVR_IER && reg <= FSL_XCVR_PHY_AI_RDATA)
 			return false;
 	switch (reg) {
@@ -1234,6 +1263,8 @@ static irqreturn_t irq0_isr(int irq, void *devid)
 
 static const struct fsl_xcvr_soc_data fsl_xcvr_imx8mp_data = {
 	.fw_name = "imx/xcvr/xcvr-imx8mp.bin",
+	.use_phy = true,
+	.pll_ver = PLL_MX8MP,
 };
 
 static const struct fsl_xcvr_soc_data fsl_xcvr_imx93_data = {
@@ -1241,9 +1272,17 @@ static const struct fsl_xcvr_soc_data fsl_xcvr_imx93_data = {
 	.use_edma = true,
 };
 
+static const struct fsl_xcvr_soc_data fsl_xcvr_imx95_data = {
+	.spdif_only = true,
+	.use_phy = true,
+	.use_edma = true,
+	.pll_ver = PLL_MX95,
+};
+
 static const struct of_device_id fsl_xcvr_dt_ids[] = {
 	{ .compatible = "fsl,imx8mp-xcvr", .data = &fsl_xcvr_imx8mp_data },
 	{ .compatible = "fsl,imx93-xcvr", .data = &fsl_xcvr_imx93_data},
+	{ .compatible = "fsl,imx95-xcvr", .data = &fsl_xcvr_imx95_data},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, fsl_xcvr_dt_ids);
@@ -1287,6 +1326,9 @@ static int fsl_xcvr_probe(struct platform_device *pdev)
 		return PTR_ERR(xcvr->pll_ipg_clk);
 	}
 
+	fsl_asoc_get_pll_clocks(dev, &xcvr->pll8k_clk,
+				&xcvr->pll11k_clk);
+
 	xcvr->ram_addr = devm_platform_ioremap_resource_byname(pdev, "ram");
 	if (IS_ERR(xcvr->ram_addr))
 		return PTR_ERR(xcvr->ram_addr);
diff --git a/sound/soc/fsl/fsl_xcvr.h b/sound/soc/fsl/fsl_xcvr.h
index 044058fc6aa2..882428592e1a 100644
--- a/sound/soc/fsl/fsl_xcvr.h
+++ b/sound/soc/fsl/fsl_xcvr.h
@@ -291,4 +291,95 @@
 #define FSL_XCVR_RX_CS_BUFF_1		0xA0 /* Second RX CS buffer */
 #define FSL_XCVR_CAP_DATA_STR		0x300 /* Capabilities data structure */
 
+/* GP PLL Registers */
+#define FSL_XCVR_GP_PLL_CTRL			0x00
+#define FSL_XCVR_GP_PLL_CTRL_SET		0x04
+#define FSL_XCVR_GP_PLL_CTRL_CLR		0x08
+#define FSL_XCVR_GP_PLL_CTRL_TOG		0x0C
+#define FSL_XCVR_GP_PLL_ANA_PRG			0x10
+#define FSL_XCVR_GP_PLL_ANA_PRG_SET		0x14
+#define FSL_XCVR_GP_PLL_ANA_PRG_CLR		0x18
+#define FSL_XCVR_GP_PLL_ANA_PRG_TOG		0x1C
+#define FSL_XCVR_GP_PLL_TEST			0x20
+#define FSL_XCVR_GP_PLL_TEST_SET		0x24
+#define FSL_XCVR_GP_PLL_TEST_CLR		0x28
+#define FSL_XCVR_GP_PLL_TEST_TOG		0x2C
+#define FSL_XCVR_GP_PLL_SPREAD_SPECTRUM		0x30
+#define FSL_XCVR_GP_PLL_SPREAD_SPECTRUM_SET	0x34
+#define FSL_XCVR_GP_PLL_SPREAD_SPECTRUM_CLR	0x38
+#define FSL_XCVR_GP_PLL_SPREAD_SPECTRUM_TOG	0x3C
+#define FSL_XCVR_GP_PLL_NUMERATOR		0x40
+#define FSL_XCVR_GP_PLL_NUMERATOR_SET		0x44
+#define FSL_XCVR_GP_PLL_NUMERATOR_CLR		0x48
+#define FSL_XCVR_GP_PLL_NUMERATOR_TOG		0x4C
+#define FSL_XCVR_GP_PLL_DENOMINATOR		0x50
+#define FSL_XCVR_GP_PLL_DENOMINATOR_SET		0x54
+#define FSL_XCVR_GP_PLL_DENOMINATOR_CLR		0x58
+#define FSL_XCVR_GP_PLL_DENOMINATOR_TOG		0x5C
+#define FSL_XCVR_GP_PLL_DIV			0x60
+#define FSL_XCVR_GP_PLL_DIV_SET			0x64
+#define FSL_XCVR_GP_PLL_DIV_CLR			0x68
+#define FSL_XCVR_GP_PLL_DIV_TOG			0x6C
+#define FSL_XCVR_GP_PLL_DFS_CTRL0		0x70
+#define FSL_XCVR_GP_PLL_DFS_CTRL0_SET		0x74
+#define FSL_XCVR_GP_PLL_DFS_CTRL0_CLR		0x78
+#define FSL_XCVR_GP_PLL_DFS_CTRL0_TOG		0x7C
+#define FSL_XCVR_GP_PLL_DFS_DIV0		0x80
+#define FSL_XCVR_GP_PLL_DFS_DIV0_SET		0x84
+#define FSL_XCVR_GP_PLL_DFS_DIV0_CLR		0x88
+#define FSL_XCVR_GP_PLL_DFS_DIV0_TOG		0x8C
+#define FSL_XCVR_GP_PLL_DFS_CTRL1		0x90
+#define FSL_XCVR_GP_PLL_DFS_CTRL1_SET		0x94
+#define FSL_XCVR_GP_PLL_DFS_CTRL1_CLR		0x98
+#define FSL_XCVR_GP_PLL_DFS_CTRL1_TOG		0x9C
+#define FSL_XCVR_GP_PLL_DFS_DIV1		0xA0
+#define FSL_XCVR_GP_PLL_DFS_DIV1_SET		0xA4
+#define FSL_XCVR_GP_PLL_DFS_DIV1_CLR		0xA8
+#define FSL_XCVR_GP_PLL_DFS_DIV1_TOG		0xAC
+#define FSL_XCVR_GP_PLL_DFS_CTRL2		0xB0
+#define FSL_XCVR_GP_PLL_DFS_CTRL2_SET		0xB4
+#define FSL_XCVR_GP_PLL_DFS_CTRL2_CLR		0xB8
+#define FSL_XCVR_GP_PLL_DFS_CTRL2_TOG		0xBC
+#define FSL_XCVR_GP_PLL_DFS_DIV2		0xC0
+#define FSL_XCVR_GP_PLL_DFS_DIV2_SET		0xC4
+#define FSL_XCVR_GP_PLL_DFS_DIV2_CLR		0xC8
+#define FSL_XCVR_GP_PLL_DFS_DIV2_TOG		0xCC
+#define FSL_XCVR_GP_PLL_DFS_CTRL3		0xD0
+#define FSL_XCVR_GP_PLL_DFS_CTRL3_SET		0xD4
+#define FSL_XCVR_GP_PLL_DFS_CTRL3_CLR		0xD8
+#define FSL_XCVR_GP_PLL_DFS_CTRL3_TOG		0xDC
+#define FSL_XCVR_GP_PLL_DFS_DIV3		0xE0
+#define FSL_XCVR_GP_PLL_DFS_DIV3_SET		0xE4
+#define FSL_XCVR_GP_PLL_DFS_DIV3_CLR		0xE8
+#define FSL_XCVR_GP_PLL_DFS_DIV3_TOG		0xEC
+#define FSL_XCVR_GP_PLL_STATUS			0xF0
+#define FSL_XCVR_GP_PLL_STATUS_SET		0xF4
+#define FSL_XCVR_GP_PLL_STATUS_CLR		0xF8
+#define FSL_XCVR_GP_PLL_STATUS_TOG		0xFC
+
+/* GP PLL Control Register */
+#define FSL_XCVR_GP_PLL_CTRL_LBYPASS		BIT(31)
+#define FSL_XCVR_GP_PLL_CTRL_HCS		BIT(16)
+#define FSL_XCVR_GP_PLL_CTRL_MSD		BIT(12)
+#define FSL_XCVR_GP_PLL_CTRL_DITHER_EN3		BIT(11)
+#define FSL_XCVR_GP_PLL_CTRL_DITHER_EN2		BIT(10)
+#define FSL_XCVR_GP_PLL_CTRL_DITHER_EN1		BIT(9)
+#define FSL_XCVR_GP_PLL_CTRL_SPREADCTL		BIT(8)
+#define FSL_XCVR_GP_PLL_CTRL_CLKMUX_BYPASS	BIT(2)
+#define FSL_XCVR_GP_PLL_CTRL_CLKMUX_EN		BIT(1)
+#define FSL_XCVR_GP_PLL_CTRL_POWERUP		BIT(0)
+
+/* GP PLL Numerator Register */
+#define FSL_XCVR_GP_PLL_NUMERATOR_MFN_SHIFT	2
+#define FSL_XCVR_GP_PLL_NUMERATOR_MFN		GENMASK(31, 2)
+
+/* GP PLL Denominator Register */
+#define FSL_XCVR_GP_PLL_DENOMINATOR_MFD		GENMASK(29, 0)
+
+/* GP PLL Dividers Register */
+#define FSL_XCVR_GP_PLL_DIV_MFI_SHIFT		16
+#define FSL_XCVR_GP_PLL_DIV_MFI			GENMASK(24, 16)
+#define FSL_XCVR_GP_PLL_DIV_RDIV		GENMASK(15, 13)
+#define FSL_XCVR_GP_PLL_DIV_ODIV		GENMASK(7, 0)
+
 #endif /* __FSL_XCVR_H */
-- 
2.34.1