[PATCH v4 0/7] PCI: xilinx-nwl: Add phy support

[Sean Anderson <sean.anderson@linux.dev>]

Add phy subsystem support for the xilinx-nwl PCIe controller. This
series also includes several small fixes and improvements.

Changes in v4:
- Clarify dt-bindings commit subject/message
- Explain likely effects of the off-by-one error
- Trim down UBSAN backtrace
- Move if to after pci_host_probe
- Remove if in err_phy
- Fix error path in phy_enable skipping the first phy
- Disable phys in reverse order
- Use dev_err instead of WARN for errors

Changes in v3:
- Document phys property
- Expand off-by-one commit message

Changes in v2:
- Remove phy-names
- Add an example
- Get phys by index and not by name

Sean Anderson (7):
  dt-bindings: pci: xilinx-nwl: Add phys property
  PCI: xilinx-nwl: Fix off-by-one in IRQ handler
  PCI: xilinx-nwl: Fix register misspelling
  PCI: xilinx-nwl: Rate-limit misc interrupt messages
  PCI: xilinx-nwl: Clean up clock on probe failure/removal
  PCI: xilinx-nwl: Add phy support
  arm64: zynqmp: Add PCIe phys

 .../bindings/pci/xlnx,nwl-pcie.yaml           |   7 +
 .../boot/dts/xilinx/zynqmp-zcu102-revA.dts    |   1 +
 drivers/pci/controller/pcie-xilinx-nwl.c      | 139 +++++++++++++++---
 3 files changed, 124 insertions(+), 23 deletions(-)

-- 
2.35.1.1320.gc452695387.dirty