From: "Rob Herring (Arm)" <robh@kernel.org>
To: Avi Fishman <avifishman70@gmail.com>,
Tomer Maimon <tmaimon77@gmail.com>,
Tali Perry <tali.perry1@gmail.com>,
Patrick Venture <venture@google.com>,
Nancy Yuen <yuenn@google.com>,
Benjamin Fair <benjaminfair@google.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org, openbmc@lists.ozlabs.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] arm: dts: nuvoton: Use standard 'i2c' bus node name
Date: Fri, 31 May 2024 14:31:04 -0500 [thread overview]
Message-ID: <20240531193104.3814663-1-robh@kernel.org> (raw)
The standard node name for I2C buses is 'i2c'.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
.../boot/dts/nuvoton/nuvoton-npcm730-kudo.dts | 22 +++++++++----------
.../nuvoton-npcm750-runbmc-olympus.dts | 22 +++++++++----------
2 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
index 5787ae95d3b4..1f07ba382910 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
@@ -525,7 +525,7 @@ max31790@58 {
};
};
- i2c-bus@4 {
+ i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
@@ -537,7 +537,7 @@ lm75@5c {
};
};
- i2c-bus@5 {
+ i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
@@ -549,7 +549,7 @@ lm75@5c {
};
};
- i2c-bus@6 {
+ i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
@@ -561,7 +561,7 @@ lm75@5c {
};
};
- i2c-bus@7 {
+ i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
@@ -580,7 +580,7 @@ i2c-mux@77 {
reg = <0x77>;
i2c-mux-idle-disconnect;
- i2c-bus@2 {
+ i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
@@ -620,7 +620,7 @@ i2c-mux@77 {
reg = <0x77>;
i2c-mux-idle-disconnect;
- i2c-bus@0 {
+ i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
@@ -632,7 +632,7 @@ adm1266@40 {
};
};
- i2c-bus@1 {
+ i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
@@ -691,7 +691,7 @@ i2c-mux@77 {
reg = <0x77>;
i2c-mux-idle-disconnect;
- i2c-bus@3 {
+ i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
@@ -703,7 +703,7 @@ lm75@28 {
};
};
- i2c-bus@4 {
+ i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
@@ -715,7 +715,7 @@ lm75@29 {
};
};
- i2c-bus@5 {
+ i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
@@ -726,7 +726,7 @@ lm75@28 {
reg = <0x28>;
};
};
- i2c-bus@6 {
+ i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
index baa39d0c1032..087f4ac43187 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
@@ -215,43 +215,43 @@ i2c-mux@70 {
reg = <0x70>;
i2c-mux-idle-disconnect;
- i2c_slot1a: i2c-bus@0 {
+ i2c_slot1a: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
- i2c_slot1b: i2c-bus@1 {
+ i2c_slot1b: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
- i2c_slot2a: i2c-bus@2 {
+ i2c_slot2a: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
- i2c_slot2b: i2c-bus@3 {
+ i2c_slot2b: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
- i2c_slot3: i2c-bus@4 {
+ i2c_slot3: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
- i2c_slot4: i2c-bus@5 {
+ i2c_slot4: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
- i2c_slot5: i2c-bus@6 {
+ i2c_slot5: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
@@ -265,24 +265,24 @@ i2c-mux@71 {
#size-cells = <0>;
i2c-mux-idle-disconnect;
- i2c_m2_s1: i2c-bus@0 {
+ i2c_m2_s1: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
- i2c_m2_s2: i2c-bus@1 {
+ i2c_m2_s2: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
- i2c_m2_s3: i2c-bus@2 {
+ i2c_m2_s3: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
- i2c_m2_s4: i2c-bus@3 {
+ i2c_m2_s4: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
--
2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: "Rob Herring (Arm)" <robh@kernel.org>
To: Avi Fishman <avifishman70@gmail.com>,
Tomer Maimon <tmaimon77@gmail.com>,
Tali Perry <tali.perry1@gmail.com>,
Patrick Venture <venture@google.com>,
Nancy Yuen <yuenn@google.com>,
Benjamin Fair <benjaminfair@google.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: openbmc@lists.ozlabs.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] arm: dts: nuvoton: Use standard 'i2c' bus node name
Date: Fri, 31 May 2024 14:31:04 -0500 [thread overview]
Message-ID: <20240531193104.3814663-1-robh@kernel.org> (raw)
The standard node name for I2C buses is 'i2c'.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
.../boot/dts/nuvoton/nuvoton-npcm730-kudo.dts | 22 +++++++++----------
.../nuvoton-npcm750-runbmc-olympus.dts | 22 +++++++++----------
2 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
index 5787ae95d3b4..1f07ba382910 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts
@@ -525,7 +525,7 @@ max31790@58 {
};
};
- i2c-bus@4 {
+ i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
@@ -537,7 +537,7 @@ lm75@5c {
};
};
- i2c-bus@5 {
+ i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
@@ -549,7 +549,7 @@ lm75@5c {
};
};
- i2c-bus@6 {
+ i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
@@ -561,7 +561,7 @@ lm75@5c {
};
};
- i2c-bus@7 {
+ i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
@@ -580,7 +580,7 @@ i2c-mux@77 {
reg = <0x77>;
i2c-mux-idle-disconnect;
- i2c-bus@2 {
+ i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
@@ -620,7 +620,7 @@ i2c-mux@77 {
reg = <0x77>;
i2c-mux-idle-disconnect;
- i2c-bus@0 {
+ i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
@@ -632,7 +632,7 @@ adm1266@40 {
};
};
- i2c-bus@1 {
+ i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
@@ -691,7 +691,7 @@ i2c-mux@77 {
reg = <0x77>;
i2c-mux-idle-disconnect;
- i2c-bus@3 {
+ i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
@@ -703,7 +703,7 @@ lm75@28 {
};
};
- i2c-bus@4 {
+ i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
@@ -715,7 +715,7 @@ lm75@29 {
};
};
- i2c-bus@5 {
+ i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
@@ -726,7 +726,7 @@ lm75@28 {
reg = <0x28>;
};
};
- i2c-bus@6 {
+ i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
index baa39d0c1032..087f4ac43187 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts
@@ -215,43 +215,43 @@ i2c-mux@70 {
reg = <0x70>;
i2c-mux-idle-disconnect;
- i2c_slot1a: i2c-bus@0 {
+ i2c_slot1a: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
- i2c_slot1b: i2c-bus@1 {
+ i2c_slot1b: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
- i2c_slot2a: i2c-bus@2 {
+ i2c_slot2a: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
- i2c_slot2b: i2c-bus@3 {
+ i2c_slot2b: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
- i2c_slot3: i2c-bus@4 {
+ i2c_slot3: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
- i2c_slot4: i2c-bus@5 {
+ i2c_slot4: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
- i2c_slot5: i2c-bus@6 {
+ i2c_slot5: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
@@ -265,24 +265,24 @@ i2c-mux@71 {
#size-cells = <0>;
i2c-mux-idle-disconnect;
- i2c_m2_s1: i2c-bus@0 {
+ i2c_m2_s1: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
- i2c_m2_s2: i2c-bus@1 {
+ i2c_m2_s2: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
- i2c_m2_s3: i2c-bus@2 {
+ i2c_m2_s3: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
- i2c_m2_s4: i2c-bus@3 {
+ i2c_m2_s4: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
--
2.43.0
next reply other threads:[~2024-05-31 19:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-31 19:31 Rob Herring (Arm) [this message]
2024-05-31 19:31 ` [PATCH] arm: dts: nuvoton: Use standard 'i2c' bus node name Rob Herring (Arm)
2024-06-23 12:21 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240531193104.3814663-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=avifishman70@gmail.com \
--cc=benjaminfair@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=tali.perry1@gmail.com \
--cc=tmaimon77@gmail.com \
--cc=venture@google.com \
--cc=yuenn@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.