From: Rob Herring (Arm) <robh@kernel.org>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH] arm: dts: aspeed: Use standard 'i2c' bus node name
Date: Fri, 31 May 2024 14:31:14 -0500 [thread overview]
Message-ID: <20240531193115.3814887-1-robh@kernel.org> (raw)
The standard node name for I2C buses is 'i2c'.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
arch/arm/boot/dts/aspeed/aspeed-g4.dtsi | 28 +++++++++++-----------
arch/arm/boot/dts/aspeed/aspeed-g5.dtsi | 28 +++++++++++-----------
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 32 ++++++++++++-------------
3 files changed, 44 insertions(+), 44 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index 857cb26ed6d7..c669ec202085 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -463,7 +463,7 @@ i2c_ic: interrupt-controller at 0 {
interrupt-controller;
};
- i2c0: i2c-bus at 40 {
+ i2c0: i2c at 40 {
#address-cells = <1>;
#size-cells = <0>;
@@ -478,7 +478,7 @@ i2c0: i2c-bus at 40 {
/* Does not need pinctrl properties */
};
- i2c1: i2c-bus at 80 {
+ i2c1: i2c at 80 {
#address-cells = <1>;
#size-cells = <0>;
@@ -493,7 +493,7 @@ i2c1: i2c-bus at 80 {
/* Does not need pinctrl properties */
};
- i2c2: i2c-bus at c0 {
+ i2c2: i2c at c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -509,7 +509,7 @@ i2c2: i2c-bus at c0 {
status = "disabled";
};
- i2c3: i2c-bus at 100 {
+ i2c3: i2c at 100 {
#address-cells = <1>;
#size-cells = <0>;
@@ -525,7 +525,7 @@ i2c3: i2c-bus at 100 {
status = "disabled";
};
- i2c4: i2c-bus at 140 {
+ i2c4: i2c at 140 {
#address-cells = <1>;
#size-cells = <0>;
@@ -541,7 +541,7 @@ i2c4: i2c-bus at 140 {
status = "disabled";
};
- i2c5: i2c-bus at 180 {
+ i2c5: i2c at 180 {
#address-cells = <1>;
#size-cells = <0>;
@@ -557,7 +557,7 @@ i2c5: i2c-bus at 180 {
status = "disabled";
};
- i2c6: i2c-bus at 1c0 {
+ i2c6: i2c at 1c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -573,7 +573,7 @@ i2c6: i2c-bus at 1c0 {
status = "disabled";
};
- i2c7: i2c-bus at 300 {
+ i2c7: i2c at 300 {
#address-cells = <1>;
#size-cells = <0>;
@@ -589,7 +589,7 @@ i2c7: i2c-bus at 300 {
status = "disabled";
};
- i2c8: i2c-bus at 340 {
+ i2c8: i2c at 340 {
#address-cells = <1>;
#size-cells = <0>;
@@ -605,7 +605,7 @@ i2c8: i2c-bus at 340 {
status = "disabled";
};
- i2c9: i2c-bus at 380 {
+ i2c9: i2c at 380 {
#address-cells = <1>;
#size-cells = <0>;
@@ -621,7 +621,7 @@ i2c9: i2c-bus at 380 {
status = "disabled";
};
- i2c10: i2c-bus at 3c0 {
+ i2c10: i2c at 3c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -637,7 +637,7 @@ i2c10: i2c-bus at 3c0 {
status = "disabled";
};
- i2c11: i2c-bus at 400 {
+ i2c11: i2c at 400 {
#address-cells = <1>;
#size-cells = <0>;
@@ -653,7 +653,7 @@ i2c11: i2c-bus at 400 {
status = "disabled";
};
- i2c12: i2c-bus at 440 {
+ i2c12: i2c at 440 {
#address-cells = <1>;
#size-cells = <0>;
@@ -669,7 +669,7 @@ i2c12: i2c-bus at 440 {
status = "disabled";
};
- i2c13: i2c-bus at 480 {
+ i2c13: i2c at 480 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index e6f3cf3c721e..6e05cbcce49c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -592,7 +592,7 @@ i2c_ic: interrupt-controller at 0 {
interrupt-controller;
};
- i2c0: i2c-bus at 40 {
+ i2c0: i2c at 40 {
#address-cells = <1>;
#size-cells = <0>;
@@ -607,7 +607,7 @@ i2c0: i2c-bus at 40 {
/* Does not need pinctrl properties */
};
- i2c1: i2c-bus at 80 {
+ i2c1: i2c at 80 {
#address-cells = <1>;
#size-cells = <0>;
@@ -622,7 +622,7 @@ i2c1: i2c-bus at 80 {
/* Does not need pinctrl properties */
};
- i2c2: i2c-bus at c0 {
+ i2c2: i2c at c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -638,7 +638,7 @@ i2c2: i2c-bus at c0 {
status = "disabled";
};
- i2c3: i2c-bus at 100 {
+ i2c3: i2c at 100 {
#address-cells = <1>;
#size-cells = <0>;
@@ -654,7 +654,7 @@ i2c3: i2c-bus at 100 {
status = "disabled";
};
- i2c4: i2c-bus at 140 {
+ i2c4: i2c at 140 {
#address-cells = <1>;
#size-cells = <0>;
@@ -670,7 +670,7 @@ i2c4: i2c-bus at 140 {
status = "disabled";
};
- i2c5: i2c-bus at 180 {
+ i2c5: i2c at 180 {
#address-cells = <1>;
#size-cells = <0>;
@@ -686,7 +686,7 @@ i2c5: i2c-bus at 180 {
status = "disabled";
};
- i2c6: i2c-bus at 1c0 {
+ i2c6: i2c at 1c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -702,7 +702,7 @@ i2c6: i2c-bus at 1c0 {
status = "disabled";
};
- i2c7: i2c-bus at 300 {
+ i2c7: i2c at 300 {
#address-cells = <1>;
#size-cells = <0>;
@@ -718,7 +718,7 @@ i2c7: i2c-bus at 300 {
status = "disabled";
};
- i2c8: i2c-bus at 340 {
+ i2c8: i2c at 340 {
#address-cells = <1>;
#size-cells = <0>;
@@ -734,7 +734,7 @@ i2c8: i2c-bus at 340 {
status = "disabled";
};
- i2c9: i2c-bus at 380 {
+ i2c9: i2c at 380 {
#address-cells = <1>;
#size-cells = <0>;
@@ -750,7 +750,7 @@ i2c9: i2c-bus at 380 {
status = "disabled";
};
- i2c10: i2c-bus at 3c0 {
+ i2c10: i2c at 3c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -766,7 +766,7 @@ i2c10: i2c-bus at 3c0 {
status = "disabled";
};
- i2c11: i2c-bus at 400 {
+ i2c11: i2c at 400 {
#address-cells = <1>;
#size-cells = <0>;
@@ -782,7 +782,7 @@ i2c11: i2c-bus at 400 {
status = "disabled";
};
- i2c12: i2c-bus at 440 {
+ i2c12: i2c at 440 {
#address-cells = <1>;
#size-cells = <0>;
@@ -798,7 +798,7 @@ i2c12: i2c-bus at 440 {
status = "disabled";
};
- i2c13: i2c-bus at 480 {
+ i2c13: i2c at 480 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 7fb421153596..0c00882f111a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -905,7 +905,7 @@ udma: dma-controller at 1e79e000 {
#include "aspeed-g6-pinctrl.dtsi"
&i2c {
- i2c0: i2c-bus at 80 {
+ i2c0: i2c at 80 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80 0x80>;
@@ -919,7 +919,7 @@ i2c0: i2c-bus at 80 {
status = "disabled";
};
- i2c1: i2c-bus at 100 {
+ i2c1: i2c at 100 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x100 0x80>;
@@ -933,7 +933,7 @@ i2c1: i2c-bus at 100 {
status = "disabled";
};
- i2c2: i2c-bus at 180 {
+ i2c2: i2c at 180 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x180 0x80>;
@@ -947,7 +947,7 @@ i2c2: i2c-bus at 180 {
status = "disabled";
};
- i2c3: i2c-bus at 200 {
+ i2c3: i2c at 200 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x200 0x80>;
@@ -961,7 +961,7 @@ i2c3: i2c-bus at 200 {
status = "disabled";
};
- i2c4: i2c-bus at 280 {
+ i2c4: i2c at 280 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x280 0x80>;
@@ -975,7 +975,7 @@ i2c4: i2c-bus at 280 {
status = "disabled";
};
- i2c5: i2c-bus at 300 {
+ i2c5: i2c at 300 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x300 0x80>;
@@ -989,7 +989,7 @@ i2c5: i2c-bus at 300 {
status = "disabled";
};
- i2c6: i2c-bus at 380 {
+ i2c6: i2c at 380 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x380 0x80>;
@@ -1003,7 +1003,7 @@ i2c6: i2c-bus at 380 {
status = "disabled";
};
- i2c7: i2c-bus at 400 {
+ i2c7: i2c at 400 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x400 0x80>;
@@ -1017,7 +1017,7 @@ i2c7: i2c-bus at 400 {
status = "disabled";
};
- i2c8: i2c-bus at 480 {
+ i2c8: i2c at 480 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x480 0x80>;
@@ -1031,7 +1031,7 @@ i2c8: i2c-bus at 480 {
status = "disabled";
};
- i2c9: i2c-bus at 500 {
+ i2c9: i2c at 500 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x500 0x80>;
@@ -1045,7 +1045,7 @@ i2c9: i2c-bus at 500 {
status = "disabled";
};
- i2c10: i2c-bus at 580 {
+ i2c10: i2c at 580 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x580 0x80>;
@@ -1059,7 +1059,7 @@ i2c10: i2c-bus at 580 {
status = "disabled";
};
- i2c11: i2c-bus at 600 {
+ i2c11: i2c at 600 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x600 0x80>;
@@ -1073,7 +1073,7 @@ i2c11: i2c-bus at 600 {
status = "disabled";
};
- i2c12: i2c-bus at 680 {
+ i2c12: i2c at 680 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x680 0x80>;
@@ -1087,7 +1087,7 @@ i2c12: i2c-bus at 680 {
status = "disabled";
};
- i2c13: i2c-bus at 700 {
+ i2c13: i2c at 700 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x700 0x80>;
@@ -1101,7 +1101,7 @@ i2c13: i2c-bus at 700 {
status = "disabled";
};
- i2c14: i2c-bus at 780 {
+ i2c14: i2c at 780 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x780 0x80>;
@@ -1115,7 +1115,7 @@ i2c14: i2c-bus at 780 {
status = "disabled";
};
- i2c15: i2c-bus at 800 {
+ i2c15: i2c at 800 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x800 0x80>;
--
2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: "Rob Herring (Arm)" <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH] arm: dts: aspeed: Use standard 'i2c' bus node name
Date: Fri, 31 May 2024 14:31:14 -0500 [thread overview]
Message-ID: <20240531193115.3814887-1-robh@kernel.org> (raw)
The standard node name for I2C buses is 'i2c'.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
arch/arm/boot/dts/aspeed/aspeed-g4.dtsi | 28 +++++++++++-----------
arch/arm/boot/dts/aspeed/aspeed-g5.dtsi | 28 +++++++++++-----------
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 32 ++++++++++++-------------
3 files changed, 44 insertions(+), 44 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index 857cb26ed6d7..c669ec202085 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -463,7 +463,7 @@ i2c_ic: interrupt-controller@0 {
interrupt-controller;
};
- i2c0: i2c-bus@40 {
+ i2c0: i2c@40 {
#address-cells = <1>;
#size-cells = <0>;
@@ -478,7 +478,7 @@ i2c0: i2c-bus@40 {
/* Does not need pinctrl properties */
};
- i2c1: i2c-bus@80 {
+ i2c1: i2c@80 {
#address-cells = <1>;
#size-cells = <0>;
@@ -493,7 +493,7 @@ i2c1: i2c-bus@80 {
/* Does not need pinctrl properties */
};
- i2c2: i2c-bus@c0 {
+ i2c2: i2c@c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -509,7 +509,7 @@ i2c2: i2c-bus@c0 {
status = "disabled";
};
- i2c3: i2c-bus@100 {
+ i2c3: i2c@100 {
#address-cells = <1>;
#size-cells = <0>;
@@ -525,7 +525,7 @@ i2c3: i2c-bus@100 {
status = "disabled";
};
- i2c4: i2c-bus@140 {
+ i2c4: i2c@140 {
#address-cells = <1>;
#size-cells = <0>;
@@ -541,7 +541,7 @@ i2c4: i2c-bus@140 {
status = "disabled";
};
- i2c5: i2c-bus@180 {
+ i2c5: i2c@180 {
#address-cells = <1>;
#size-cells = <0>;
@@ -557,7 +557,7 @@ i2c5: i2c-bus@180 {
status = "disabled";
};
- i2c6: i2c-bus@1c0 {
+ i2c6: i2c@1c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -573,7 +573,7 @@ i2c6: i2c-bus@1c0 {
status = "disabled";
};
- i2c7: i2c-bus@300 {
+ i2c7: i2c@300 {
#address-cells = <1>;
#size-cells = <0>;
@@ -589,7 +589,7 @@ i2c7: i2c-bus@300 {
status = "disabled";
};
- i2c8: i2c-bus@340 {
+ i2c8: i2c@340 {
#address-cells = <1>;
#size-cells = <0>;
@@ -605,7 +605,7 @@ i2c8: i2c-bus@340 {
status = "disabled";
};
- i2c9: i2c-bus@380 {
+ i2c9: i2c@380 {
#address-cells = <1>;
#size-cells = <0>;
@@ -621,7 +621,7 @@ i2c9: i2c-bus@380 {
status = "disabled";
};
- i2c10: i2c-bus@3c0 {
+ i2c10: i2c@3c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -637,7 +637,7 @@ i2c10: i2c-bus@3c0 {
status = "disabled";
};
- i2c11: i2c-bus@400 {
+ i2c11: i2c@400 {
#address-cells = <1>;
#size-cells = <0>;
@@ -653,7 +653,7 @@ i2c11: i2c-bus@400 {
status = "disabled";
};
- i2c12: i2c-bus@440 {
+ i2c12: i2c@440 {
#address-cells = <1>;
#size-cells = <0>;
@@ -669,7 +669,7 @@ i2c12: i2c-bus@440 {
status = "disabled";
};
- i2c13: i2c-bus@480 {
+ i2c13: i2c@480 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index e6f3cf3c721e..6e05cbcce49c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -592,7 +592,7 @@ i2c_ic: interrupt-controller@0 {
interrupt-controller;
};
- i2c0: i2c-bus@40 {
+ i2c0: i2c@40 {
#address-cells = <1>;
#size-cells = <0>;
@@ -607,7 +607,7 @@ i2c0: i2c-bus@40 {
/* Does not need pinctrl properties */
};
- i2c1: i2c-bus@80 {
+ i2c1: i2c@80 {
#address-cells = <1>;
#size-cells = <0>;
@@ -622,7 +622,7 @@ i2c1: i2c-bus@80 {
/* Does not need pinctrl properties */
};
- i2c2: i2c-bus@c0 {
+ i2c2: i2c@c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -638,7 +638,7 @@ i2c2: i2c-bus@c0 {
status = "disabled";
};
- i2c3: i2c-bus@100 {
+ i2c3: i2c@100 {
#address-cells = <1>;
#size-cells = <0>;
@@ -654,7 +654,7 @@ i2c3: i2c-bus@100 {
status = "disabled";
};
- i2c4: i2c-bus@140 {
+ i2c4: i2c@140 {
#address-cells = <1>;
#size-cells = <0>;
@@ -670,7 +670,7 @@ i2c4: i2c-bus@140 {
status = "disabled";
};
- i2c5: i2c-bus@180 {
+ i2c5: i2c@180 {
#address-cells = <1>;
#size-cells = <0>;
@@ -686,7 +686,7 @@ i2c5: i2c-bus@180 {
status = "disabled";
};
- i2c6: i2c-bus@1c0 {
+ i2c6: i2c@1c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -702,7 +702,7 @@ i2c6: i2c-bus@1c0 {
status = "disabled";
};
- i2c7: i2c-bus@300 {
+ i2c7: i2c@300 {
#address-cells = <1>;
#size-cells = <0>;
@@ -718,7 +718,7 @@ i2c7: i2c-bus@300 {
status = "disabled";
};
- i2c8: i2c-bus@340 {
+ i2c8: i2c@340 {
#address-cells = <1>;
#size-cells = <0>;
@@ -734,7 +734,7 @@ i2c8: i2c-bus@340 {
status = "disabled";
};
- i2c9: i2c-bus@380 {
+ i2c9: i2c@380 {
#address-cells = <1>;
#size-cells = <0>;
@@ -750,7 +750,7 @@ i2c9: i2c-bus@380 {
status = "disabled";
};
- i2c10: i2c-bus@3c0 {
+ i2c10: i2c@3c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -766,7 +766,7 @@ i2c10: i2c-bus@3c0 {
status = "disabled";
};
- i2c11: i2c-bus@400 {
+ i2c11: i2c@400 {
#address-cells = <1>;
#size-cells = <0>;
@@ -782,7 +782,7 @@ i2c11: i2c-bus@400 {
status = "disabled";
};
- i2c12: i2c-bus@440 {
+ i2c12: i2c@440 {
#address-cells = <1>;
#size-cells = <0>;
@@ -798,7 +798,7 @@ i2c12: i2c-bus@440 {
status = "disabled";
};
- i2c13: i2c-bus@480 {
+ i2c13: i2c@480 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 7fb421153596..0c00882f111a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -905,7 +905,7 @@ udma: dma-controller@1e79e000 {
#include "aspeed-g6-pinctrl.dtsi"
&i2c {
- i2c0: i2c-bus@80 {
+ i2c0: i2c@80 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80 0x80>;
@@ -919,7 +919,7 @@ i2c0: i2c-bus@80 {
status = "disabled";
};
- i2c1: i2c-bus@100 {
+ i2c1: i2c@100 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x100 0x80>;
@@ -933,7 +933,7 @@ i2c1: i2c-bus@100 {
status = "disabled";
};
- i2c2: i2c-bus@180 {
+ i2c2: i2c@180 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x180 0x80>;
@@ -947,7 +947,7 @@ i2c2: i2c-bus@180 {
status = "disabled";
};
- i2c3: i2c-bus@200 {
+ i2c3: i2c@200 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x200 0x80>;
@@ -961,7 +961,7 @@ i2c3: i2c-bus@200 {
status = "disabled";
};
- i2c4: i2c-bus@280 {
+ i2c4: i2c@280 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x280 0x80>;
@@ -975,7 +975,7 @@ i2c4: i2c-bus@280 {
status = "disabled";
};
- i2c5: i2c-bus@300 {
+ i2c5: i2c@300 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x300 0x80>;
@@ -989,7 +989,7 @@ i2c5: i2c-bus@300 {
status = "disabled";
};
- i2c6: i2c-bus@380 {
+ i2c6: i2c@380 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x380 0x80>;
@@ -1003,7 +1003,7 @@ i2c6: i2c-bus@380 {
status = "disabled";
};
- i2c7: i2c-bus@400 {
+ i2c7: i2c@400 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x400 0x80>;
@@ -1017,7 +1017,7 @@ i2c7: i2c-bus@400 {
status = "disabled";
};
- i2c8: i2c-bus@480 {
+ i2c8: i2c@480 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x480 0x80>;
@@ -1031,7 +1031,7 @@ i2c8: i2c-bus@480 {
status = "disabled";
};
- i2c9: i2c-bus@500 {
+ i2c9: i2c@500 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x500 0x80>;
@@ -1045,7 +1045,7 @@ i2c9: i2c-bus@500 {
status = "disabled";
};
- i2c10: i2c-bus@580 {
+ i2c10: i2c@580 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x580 0x80>;
@@ -1059,7 +1059,7 @@ i2c10: i2c-bus@580 {
status = "disabled";
};
- i2c11: i2c-bus@600 {
+ i2c11: i2c@600 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x600 0x80>;
@@ -1073,7 +1073,7 @@ i2c11: i2c-bus@600 {
status = "disabled";
};
- i2c12: i2c-bus@680 {
+ i2c12: i2c@680 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x680 0x80>;
@@ -1087,7 +1087,7 @@ i2c12: i2c-bus@680 {
status = "disabled";
};
- i2c13: i2c-bus@700 {
+ i2c13: i2c@700 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x700 0x80>;
@@ -1101,7 +1101,7 @@ i2c13: i2c-bus@700 {
status = "disabled";
};
- i2c14: i2c-bus@780 {
+ i2c14: i2c@780 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x780 0x80>;
@@ -1115,7 +1115,7 @@ i2c14: i2c-bus@780 {
status = "disabled";
};
- i2c15: i2c-bus@800 {
+ i2c15: i2c@800 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x800 0x80>;
--
2.43.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: "Rob Herring (Arm)" <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH] arm: dts: aspeed: Use standard 'i2c' bus node name
Date: Fri, 31 May 2024 14:31:14 -0500 [thread overview]
Message-ID: <20240531193115.3814887-1-robh@kernel.org> (raw)
The standard node name for I2C buses is 'i2c'.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
arch/arm/boot/dts/aspeed/aspeed-g4.dtsi | 28 +++++++++++-----------
arch/arm/boot/dts/aspeed/aspeed-g5.dtsi | 28 +++++++++++-----------
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 32 ++++++++++++-------------
3 files changed, 44 insertions(+), 44 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index 857cb26ed6d7..c669ec202085 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -463,7 +463,7 @@ i2c_ic: interrupt-controller@0 {
interrupt-controller;
};
- i2c0: i2c-bus@40 {
+ i2c0: i2c@40 {
#address-cells = <1>;
#size-cells = <0>;
@@ -478,7 +478,7 @@ i2c0: i2c-bus@40 {
/* Does not need pinctrl properties */
};
- i2c1: i2c-bus@80 {
+ i2c1: i2c@80 {
#address-cells = <1>;
#size-cells = <0>;
@@ -493,7 +493,7 @@ i2c1: i2c-bus@80 {
/* Does not need pinctrl properties */
};
- i2c2: i2c-bus@c0 {
+ i2c2: i2c@c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -509,7 +509,7 @@ i2c2: i2c-bus@c0 {
status = "disabled";
};
- i2c3: i2c-bus@100 {
+ i2c3: i2c@100 {
#address-cells = <1>;
#size-cells = <0>;
@@ -525,7 +525,7 @@ i2c3: i2c-bus@100 {
status = "disabled";
};
- i2c4: i2c-bus@140 {
+ i2c4: i2c@140 {
#address-cells = <1>;
#size-cells = <0>;
@@ -541,7 +541,7 @@ i2c4: i2c-bus@140 {
status = "disabled";
};
- i2c5: i2c-bus@180 {
+ i2c5: i2c@180 {
#address-cells = <1>;
#size-cells = <0>;
@@ -557,7 +557,7 @@ i2c5: i2c-bus@180 {
status = "disabled";
};
- i2c6: i2c-bus@1c0 {
+ i2c6: i2c@1c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -573,7 +573,7 @@ i2c6: i2c-bus@1c0 {
status = "disabled";
};
- i2c7: i2c-bus@300 {
+ i2c7: i2c@300 {
#address-cells = <1>;
#size-cells = <0>;
@@ -589,7 +589,7 @@ i2c7: i2c-bus@300 {
status = "disabled";
};
- i2c8: i2c-bus@340 {
+ i2c8: i2c@340 {
#address-cells = <1>;
#size-cells = <0>;
@@ -605,7 +605,7 @@ i2c8: i2c-bus@340 {
status = "disabled";
};
- i2c9: i2c-bus@380 {
+ i2c9: i2c@380 {
#address-cells = <1>;
#size-cells = <0>;
@@ -621,7 +621,7 @@ i2c9: i2c-bus@380 {
status = "disabled";
};
- i2c10: i2c-bus@3c0 {
+ i2c10: i2c@3c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -637,7 +637,7 @@ i2c10: i2c-bus@3c0 {
status = "disabled";
};
- i2c11: i2c-bus@400 {
+ i2c11: i2c@400 {
#address-cells = <1>;
#size-cells = <0>;
@@ -653,7 +653,7 @@ i2c11: i2c-bus@400 {
status = "disabled";
};
- i2c12: i2c-bus@440 {
+ i2c12: i2c@440 {
#address-cells = <1>;
#size-cells = <0>;
@@ -669,7 +669,7 @@ i2c12: i2c-bus@440 {
status = "disabled";
};
- i2c13: i2c-bus@480 {
+ i2c13: i2c@480 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index e6f3cf3c721e..6e05cbcce49c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -592,7 +592,7 @@ i2c_ic: interrupt-controller@0 {
interrupt-controller;
};
- i2c0: i2c-bus@40 {
+ i2c0: i2c@40 {
#address-cells = <1>;
#size-cells = <0>;
@@ -607,7 +607,7 @@ i2c0: i2c-bus@40 {
/* Does not need pinctrl properties */
};
- i2c1: i2c-bus@80 {
+ i2c1: i2c@80 {
#address-cells = <1>;
#size-cells = <0>;
@@ -622,7 +622,7 @@ i2c1: i2c-bus@80 {
/* Does not need pinctrl properties */
};
- i2c2: i2c-bus@c0 {
+ i2c2: i2c@c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -638,7 +638,7 @@ i2c2: i2c-bus@c0 {
status = "disabled";
};
- i2c3: i2c-bus@100 {
+ i2c3: i2c@100 {
#address-cells = <1>;
#size-cells = <0>;
@@ -654,7 +654,7 @@ i2c3: i2c-bus@100 {
status = "disabled";
};
- i2c4: i2c-bus@140 {
+ i2c4: i2c@140 {
#address-cells = <1>;
#size-cells = <0>;
@@ -670,7 +670,7 @@ i2c4: i2c-bus@140 {
status = "disabled";
};
- i2c5: i2c-bus@180 {
+ i2c5: i2c@180 {
#address-cells = <1>;
#size-cells = <0>;
@@ -686,7 +686,7 @@ i2c5: i2c-bus@180 {
status = "disabled";
};
- i2c6: i2c-bus@1c0 {
+ i2c6: i2c@1c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -702,7 +702,7 @@ i2c6: i2c-bus@1c0 {
status = "disabled";
};
- i2c7: i2c-bus@300 {
+ i2c7: i2c@300 {
#address-cells = <1>;
#size-cells = <0>;
@@ -718,7 +718,7 @@ i2c7: i2c-bus@300 {
status = "disabled";
};
- i2c8: i2c-bus@340 {
+ i2c8: i2c@340 {
#address-cells = <1>;
#size-cells = <0>;
@@ -734,7 +734,7 @@ i2c8: i2c-bus@340 {
status = "disabled";
};
- i2c9: i2c-bus@380 {
+ i2c9: i2c@380 {
#address-cells = <1>;
#size-cells = <0>;
@@ -750,7 +750,7 @@ i2c9: i2c-bus@380 {
status = "disabled";
};
- i2c10: i2c-bus@3c0 {
+ i2c10: i2c@3c0 {
#address-cells = <1>;
#size-cells = <0>;
@@ -766,7 +766,7 @@ i2c10: i2c-bus@3c0 {
status = "disabled";
};
- i2c11: i2c-bus@400 {
+ i2c11: i2c@400 {
#address-cells = <1>;
#size-cells = <0>;
@@ -782,7 +782,7 @@ i2c11: i2c-bus@400 {
status = "disabled";
};
- i2c12: i2c-bus@440 {
+ i2c12: i2c@440 {
#address-cells = <1>;
#size-cells = <0>;
@@ -798,7 +798,7 @@ i2c12: i2c-bus@440 {
status = "disabled";
};
- i2c13: i2c-bus@480 {
+ i2c13: i2c@480 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 7fb421153596..0c00882f111a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -905,7 +905,7 @@ udma: dma-controller@1e79e000 {
#include "aspeed-g6-pinctrl.dtsi"
&i2c {
- i2c0: i2c-bus@80 {
+ i2c0: i2c@80 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80 0x80>;
@@ -919,7 +919,7 @@ i2c0: i2c-bus@80 {
status = "disabled";
};
- i2c1: i2c-bus@100 {
+ i2c1: i2c@100 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x100 0x80>;
@@ -933,7 +933,7 @@ i2c1: i2c-bus@100 {
status = "disabled";
};
- i2c2: i2c-bus@180 {
+ i2c2: i2c@180 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x180 0x80>;
@@ -947,7 +947,7 @@ i2c2: i2c-bus@180 {
status = "disabled";
};
- i2c3: i2c-bus@200 {
+ i2c3: i2c@200 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x200 0x80>;
@@ -961,7 +961,7 @@ i2c3: i2c-bus@200 {
status = "disabled";
};
- i2c4: i2c-bus@280 {
+ i2c4: i2c@280 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x280 0x80>;
@@ -975,7 +975,7 @@ i2c4: i2c-bus@280 {
status = "disabled";
};
- i2c5: i2c-bus@300 {
+ i2c5: i2c@300 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x300 0x80>;
@@ -989,7 +989,7 @@ i2c5: i2c-bus@300 {
status = "disabled";
};
- i2c6: i2c-bus@380 {
+ i2c6: i2c@380 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x380 0x80>;
@@ -1003,7 +1003,7 @@ i2c6: i2c-bus@380 {
status = "disabled";
};
- i2c7: i2c-bus@400 {
+ i2c7: i2c@400 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x400 0x80>;
@@ -1017,7 +1017,7 @@ i2c7: i2c-bus@400 {
status = "disabled";
};
- i2c8: i2c-bus@480 {
+ i2c8: i2c@480 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x480 0x80>;
@@ -1031,7 +1031,7 @@ i2c8: i2c-bus@480 {
status = "disabled";
};
- i2c9: i2c-bus@500 {
+ i2c9: i2c@500 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x500 0x80>;
@@ -1045,7 +1045,7 @@ i2c9: i2c-bus@500 {
status = "disabled";
};
- i2c10: i2c-bus@580 {
+ i2c10: i2c@580 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x580 0x80>;
@@ -1059,7 +1059,7 @@ i2c10: i2c-bus@580 {
status = "disabled";
};
- i2c11: i2c-bus@600 {
+ i2c11: i2c@600 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x600 0x80>;
@@ -1073,7 +1073,7 @@ i2c11: i2c-bus@600 {
status = "disabled";
};
- i2c12: i2c-bus@680 {
+ i2c12: i2c@680 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x680 0x80>;
@@ -1087,7 +1087,7 @@ i2c12: i2c-bus@680 {
status = "disabled";
};
- i2c13: i2c-bus@700 {
+ i2c13: i2c@700 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x700 0x80>;
@@ -1101,7 +1101,7 @@ i2c13: i2c-bus@700 {
status = "disabled";
};
- i2c14: i2c-bus@780 {
+ i2c14: i2c@780 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x780 0x80>;
@@ -1115,7 +1115,7 @@ i2c14: i2c-bus@780 {
status = "disabled";
};
- i2c15: i2c-bus@800 {
+ i2c15: i2c@800 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x800 0x80>;
--
2.43.0
next reply other threads:[~2024-05-31 19:31 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-31 19:31 Rob Herring [this message]
2024-05-31 19:31 ` [PATCH] arm: dts: aspeed: Use standard 'i2c' bus node name Rob Herring (Arm)
2024-05-31 19:31 ` Rob Herring (Arm)
2024-06-04 1:53 ` Andrew Jeffery
2024-06-04 1:53 ` Andrew Jeffery
2024-06-04 1:53 ` Andrew Jeffery
2024-06-07 9:44 ` kernel test robot
2024-06-07 9:44 ` kernel test robot
2024-06-07 9:44 ` kernel test robot
2024-06-23 12:21 ` Krzysztof Kozlowski
2024-06-23 12:21 ` Krzysztof Kozlowski
2024-06-24 1:55 ` Joel Stanley
2024-06-24 1:55 ` Joel Stanley
2024-06-24 4:46 ` Krzysztof Kozlowski
2024-06-24 4:46 ` Krzysztof Kozlowski
2024-06-24 16:49 ` Rob Herring
2024-06-24 16:49 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240531193115.3814887-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.