From: Mike Looijmans <mike.looijmans@topic.nl>
To: devicetree@vger.kernel.org
Cc: Mike Looijmans <mike.looijmans@topic.nl>,
Conor Dooley <conor+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Rob Herring <robh@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: ls1028a-rdb: Add EEPROM nodes to I2C bus
Date: Tue, 4 Jun 2024 08:27:22 +0200 [thread overview]
Message-ID: <20240604062723.82703-1-mike.looijmans@topic.nl> (raw)
In-Reply-To: 1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.c99f8488-228d-4347-9f04-8a0b4c3c2a3f@emailsignatures365.codetwo.com
The LS1028ARDB board contains three EEPROM devices, for
storing boot code, DDR SPD and board information. Add the
missing entries to the devicetree.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
---
.../boot/dts/freescale/fsl-ls1028a-rdb.dts | 31 +++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index ecd2c1ea177f..757a34ba7da3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -201,6 +201,37 @@ i2c-mux@77 {
#address-cells = <1>;
#size-cells = <0>;
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ /* Atmel AT24C512C-XHDB: 64 KB EEPROM */
+ eeprom@50 {
+ compatible = "atmel,24c512";
+ reg = <0x50>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ /* AT24C04C 512-byte DDR4 SPD EEPROM */
+ /* Documentation says 0x51, but must be even and i2cdetect says 0x52 */
+ eeprom@52 {
+ compatible = "atmel,24c04";
+ reg = <0x52>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ /* Atmel AT24C02C-XHMB: 256-byte EEPROM */
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+
i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
--
2.34.1
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands
T: +31 (0) 499 33 69 69
E: mike.looijmans@topic.nl
W: www.topic.nl
Please consider the environment before printing this e-mail
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Mike Looijmans <mike.looijmans@topic.nl>
To: devicetree@vger.kernel.org
Cc: Mike Looijmans <mike.looijmans@topic.nl>,
Conor Dooley <conor+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Rob Herring <robh@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: ls1028a-rdb: Add EEPROM nodes to I2C bus
Date: Tue, 4 Jun 2024 08:27:22 +0200 [thread overview]
Message-ID: <20240604062723.82703-1-mike.looijmans@topic.nl> (raw)
In-Reply-To: 1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.c99f8488-228d-4347-9f04-8a0b4c3c2a3f@emailsignatures365.codetwo.com
The LS1028ARDB board contains three EEPROM devices, for
storing boot code, DDR SPD and board information. Add the
missing entries to the devicetree.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
---
.../boot/dts/freescale/fsl-ls1028a-rdb.dts | 31 +++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index ecd2c1ea177f..757a34ba7da3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -201,6 +201,37 @@ i2c-mux@77 {
#address-cells = <1>;
#size-cells = <0>;
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ /* Atmel AT24C512C-XHDB: 64 KB EEPROM */
+ eeprom@50 {
+ compatible = "atmel,24c512";
+ reg = <0x50>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ /* AT24C04C 512-byte DDR4 SPD EEPROM */
+ /* Documentation says 0x51, but must be even and i2cdetect says 0x52 */
+ eeprom@52 {
+ compatible = "atmel,24c04";
+ reg = <0x52>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ /* Atmel AT24C02C-XHMB: 256-byte EEPROM */
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+
i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
--
2.34.1
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands
T: +31 (0) 499 33 69 69
E: mike.looijmans@topic.nl
W: www.topic.nl
Please consider the environment before printing this e-mail
next parent reply other threads:[~2024-06-04 6:27 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.c99f8488-228d-4347-9f04-8a0b4c3c2a3f@emailsignatures365.codetwo.com>
2024-06-04 6:27 ` Mike Looijmans [this message]
2024-06-04 6:27 ` [PATCH] arm64: dts: ls1028a-rdb: Add EEPROM nodes to I2C bus Mike Looijmans
2024-06-16 12:22 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240604062723.82703-1-mike.looijmans@topic.nl \
--to=mike.looijmans@topic.nl \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.