* [meta-rockchip][PATCH] radxa-zero-3e: add @ 2024-06-12 2:01 Trevor Woerner 2024-06-12 9:03 ` [yocto-patches] " Quentin Schulz 0 siblings, 1 reply; 4+ messages in thread From: Trevor Woerner @ 2024-06-12 2:01 UTC (permalink / raw) To: yocto-patches The Radxa ZERO 3e is an ultra-small, high-performance single board computer based on the Rockchip RK3566, with a compact form factor, and rich interfaces. http://radxa.com/products/zeros/zero3e/ tech specs: - Rockchip RK3566 (4x Arm Cortex-A55 @ 1.6GHz) - Arm Mali-G52-2EE (OpenGL ES 1.1/2.0/3.0/3.1/3.2, Vulkan 1.1, OpenCL 2.0) - LPDDR4 RAM (1/2/3/8 GB) - µSD - GbE - 1x USB 2.0 Type C OTG, 1x USB 3.0 Type C Host - 1x µHDMI (1080p @ 60fps) - 1x MIPI CSI camera port - colour-coded 40-pin GPIO (uart, spi, i2c, pcm/i2s, pwm, gpio) - 72mm x 30mm NOTE: currently support for this board requires a U-Boot fork for the bootloader, and linux-next for the kernel. Support will probably come in linux kernel 6.11-ish, at which point U-Boot will then use that kernel's device tree which means U-Boot support will come after the release of whichever kernel includes support for this board. Signed-off-by: Trevor Woerner <twoerner@gmail.com> --- README | 1 + conf/machine/include/rk3566.inc | 21 ++++++++++++++++++ conf/machine/radxa-zero-3e.conf | 12 ++++++++++ recipes-bsp/rkbin/rockchip-rkbin_git.bb | 11 ++++++++++ recipes-bsp/u-boot/u-boot-rockchip.inc | 2 ++ recipes-bsp/u-boot/u-boot_%.bbappend | 5 +++++ .../linux/linux-torvalds-next_git.bb | 22 +++++++++++++++++++ 7 files changed, 74 insertions(+) create mode 100644 conf/machine/include/rk3566.inc create mode 100644 conf/machine/radxa-zero-3e.conf create mode 100644 recipes-kernel/linux/linux-torvalds-next_git.bb diff --git a/README b/README index b21e92360dcc..a9a040a4308d 100644 --- a/README +++ b/README @@ -40,6 +40,7 @@ Status of supported boards: orangepi-5-plus rock-3a rock-4c-plus + radxa-zero-3e builds: marsboard-rk3066 radxarock diff --git a/conf/machine/include/rk3566.inc b/conf/machine/include/rk3566.inc new file mode 100644 index 000000000000..41d0a227a988 --- /dev/null +++ b/conf/machine/include/rk3566.inc @@ -0,0 +1,21 @@ +SOC_FAMILY = "rk3566" + +DEFAULTTUNE ?= "cortexa55" + +ROCKCHIP_CLOSED_TPL ?= "1" + +require conf/machine/include/soc-family.inc +require conf/machine/include/rockchip-defaults.inc +require conf/machine/include/arm/armv8-2a/tune-cortexa55.inc +require conf/machine/include/rockchip-wic.inc + +KBUILD_DEFCONFIG ?= "defconfig" +#KERNEL_FEATURES:append:rk3566 = " bsp/rockchip/remove-non-rockchip-arch-arm64.scc" +KERNEL_CLASSES = "kernel-fitimage" +KERNEL_IMAGETYPE ?= "fitImage" + +PREFERRED_PROVIDER_trusted-firmware-a = "rockchip-rkbin" +PREFERRED_PROVIDER_optee-os = "rockchip-rkbin" + +UBOOT_SUFFIX ?= "itb" +UBOOT_ENTRYPOINT ?= "0x06000000" diff --git a/conf/machine/radxa-zero-3e.conf b/conf/machine/radxa-zero-3e.conf new file mode 100644 index 000000000000..3a39d6c12a1f --- /dev/null +++ b/conf/machine/radxa-zero-3e.conf @@ -0,0 +1,12 @@ +#@TYPE: Machine +#@NAME: Radxa Zero 3E +#@DESCRIPTION: The Radxa ZERO 3e is an ultra-small, high-performance single board computer based on the Rockchip RK3566, with a compact form factor, and rich interfaces. +#http://radxa.com/products/zeros/zero3e/ + +require conf/machine/include/rk3566.inc + +PREFERRED_PROVIDER_virtual/kernel = "linux-torvalds-next" +KERNEL_DEVICETREE = "rockchip/rk3566-radxa-zero-3e.dtb" +MACHINE_EXTRA_RRECOMMENDS += "kernel-modules" + +UBOOT_MACHINE = "radxa-zero-3-rk3566_defconfig" diff --git a/recipes-bsp/rkbin/rockchip-rkbin_git.bb b/recipes-bsp/rkbin/rockchip-rkbin_git.bb index 7929c6ac3a10..6894558ef70c 100644 --- a/recipes-bsp/rkbin/rockchip-rkbin_git.bb +++ b/recipes-bsp/rkbin/rockchip-rkbin_git.bb @@ -4,6 +4,7 @@ LIC_FILES_CHKSUM = "file://LICENSE;md5=15faa4a01e7eb0f5d33f9f2bcc7bff62" SRC_URI = "git://github.com/rockchip-linux/rkbin;protocol=https;branch=master" SRCREV = "b4558da0860ca48bf1a571dd33ccba580b9abe23" +SRCREV:radxa-zero-3e = "a2a0b89b6c8c612dca5ed9ed8a68db8a07f68bc0" PROVIDES += "trusted-firmware-a" PROVIDES += "optee-os" @@ -15,6 +16,7 @@ S = "${WORKDIR}/git" COMPATIBLE_MACHINE = "^$" COMPATIBLE_MACHINE:rk3308 = "rk3308" COMPATIBLE_MACHINE:rk3568 = "rk3568" +COMPATIBLE_MACHINE:rk3566 = "rk3566" COMPATIBLE_MACHINE:rk3588s = "rk3588s" PACKAGE_ARCH = "${MACHINE_ARCH}" @@ -36,6 +38,15 @@ do_deploy:rk3308() { install -m 644 ${S}/bin/rk33/rk3308_ddr_589MHz_uart?_m0_v*.bin ${DEPLOYDIR}/ddr-rk3308.bin } +do_deploy:rk3566() { + # Prebuilt TF-A + install -m 644 ${S}/bin/rk35/rk3568_bl31_v*.elf ${DEPLOYDIR}/bl31-rk3568.elf + # Prebuilt OPTEE-OS + install -m 644 ${S}/bin/rk35/rk3568_bl32_v*.bin ${DEPLOYDIR}/tee-rk3568.bin + # Prebuilt U-Boot TPL (DDR init) + install -m 644 ${S}/bin/rk35/rk3566_ddr_1056MHz_v1.21.bin ${DEPLOYDIR}/ddr-rk3566.bin +} + do_deploy:rk3568() { # Prebuilt TF-A install -m 644 ${S}/bin/rk35/rk3568_bl31_v*.elf ${DEPLOYDIR}/bl31-rk3568.elf diff --git a/recipes-bsp/u-boot/u-boot-rockchip.inc b/recipes-bsp/u-boot/u-boot-rockchip.inc index d2267cc53a92..113190635bb5 100644 --- a/recipes-bsp/u-boot/u-boot-rockchip.inc +++ b/recipes-bsp/u-boot/u-boot-rockchip.inc @@ -1,6 +1,8 @@ BL31:rockchip:aarch64 = "${DEPLOY_DIR_IMAGE}/bl31-${SOC_FAMILY}.elf" # SOC_FAMILY for RK3588S is rk3588s but it should use the binaries from rk3588 BL31:rk3588s = "${DEPLOY_DIR_IMAGE}/bl31-rk3588.elf" +# rk3566 uses the rk3568 bl31 +BL31:rk3566 = "${DEPLOY_DIR_IMAGE}/bl31-rk3568.elf" EXTRA_OEMAKE:append:rockchip:aarch64 = " BL31=${BL31}" TFA_DEPENDS ??= "" diff --git a/recipes-bsp/u-boot/u-boot_%.bbappend b/recipes-bsp/u-boot/u-boot_%.bbappend index 1f5f63459627..dca43d2a4de0 100644 --- a/recipes-bsp/u-boot/u-boot_%.bbappend +++ b/recipes-bsp/u-boot/u-boot_%.bbappend @@ -2,6 +2,11 @@ require u-boot-rockchip.inc FILESEXTRAPATHS:prepend := "${THISDIR}/files:" +SRC_URI:radxa-zero-3e = "git://github.com/Kwiboo/u-boot-rockchip.git;protocol=https;branch=rk3xxx-2024.07;name=Kwiboo" +SRC_URI[Kwiboo.sha256sum] = "5d102a658262f6d2d4ea0664fe58b77db4a9eb1ebc89dbd8d6f5e75c9e563810" +SRCREV:radxa-zero-3e = "8cdf606e616baa36751f3b4adcfaefc781126c8c" +SRCREV:radxa-zero-3e:rk-u-boot-env = "8cdf606e616baa36751f3b4adcfaefc781126c8c" + SRC_URI:append:rk-u-boot-env = " file://rockchip-enable-environment-mmc.cfg" SRCREV:rk-u-boot-env = "cdfcc37428e06f4730ab9a17cc084eeb7676ea1a" diff --git a/recipes-kernel/linux/linux-torvalds-next_git.bb b/recipes-kernel/linux/linux-torvalds-next_git.bb new file mode 100644 index 000000000000..bbe4689922a7 --- /dev/null +++ b/recipes-kernel/linux/linux-torvalds-next_git.bb @@ -0,0 +1,22 @@ +inherit kernel +inherit kernel-yocto +require recipes-kernel/linux/linux-yocto.inc + +FILESEXTRAPATHS:prepend := "${THISDIR}/files:" + +DESCRIPTION = "Linux Kernel" +SECTION = "kernel" +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46" + + +LINUX_VERSION = "6.10" +KERNEL_VERSION_SANITY_SKIP = "1" +SRCREV = "next-20240611" +PV = "${LINUX_VERSION}+git${SRCPV}" +SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git;protocol=https;branch=master" +SRC_URI[sha256sum] = "3a1c433c4ceffa52f8c3df3aab8c379ff91ca658021d409a528825e5e24580f4" + +do_compile:append() { + touch ${B}/Module.symvers +} -- 2.44.0.478.g7774cfed6261 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [yocto-patches] [meta-rockchip][PATCH] radxa-zero-3e: add 2024-06-12 2:01 [meta-rockchip][PATCH] radxa-zero-3e: add Trevor Woerner @ 2024-06-12 9:03 ` Quentin Schulz 2024-06-12 13:33 ` Trevor Woerner 0 siblings, 1 reply; 4+ messages in thread From: Quentin Schulz @ 2024-06-12 9:03 UTC (permalink / raw) To: yocto-patches Hi Trevor, On 6/12/24 4:01 AM, Trevor Woerner via lists.yoctoproject.org wrote: > The Radxa ZERO 3e is an ultra-small, high-performance single board computer > based on the Rockchip RK3566, with a compact form factor, and rich interfaces. > > http://radxa.com/products/zeros/zero3e/ > > tech specs: > - Rockchip RK3566 (4x Arm Cortex-A55 @ 1.6GHz) > - Arm Mali-G52-2EE (OpenGL ES 1.1/2.0/3.0/3.1/3.2, Vulkan 1.1, OpenCL 2.0) > - LPDDR4 RAM (1/2/3/8 GB) > - µSD > - GbE > - 1x USB 2.0 Type C OTG, 1x USB 3.0 Type C Host > - 1x µHDMI (1080p @ 60fps) > - 1x MIPI CSI camera port > - colour-coded 40-pin GPIO (uart, spi, i2c, pcm/i2s, pwm, gpio) > - 72mm x 30mm > > NOTE: currently support for this board requires a U-Boot fork for the > bootloader, and linux-next for the kernel. Support will probably come in linux > kernel 6.11-ish, at which point U-Boot will then use that kernel's device tree > which means U-Boot support will come after the release of whichever kernel > includes support for this board. > Jonas has added support for generic builds for some Rockchip SoCs, maybe you could use that if it provides enough features for now and allows to reach Linux userspace? The target is probably generic-rk3568_defconfig for this board for example. > Signed-off-by: Trevor Woerner <twoerner@gmail.com> > --- > README | 1 + > conf/machine/include/rk3566.inc | 21 ++++++++++++++++++ > conf/machine/radxa-zero-3e.conf | 12 ++++++++++ > recipes-bsp/rkbin/rockchip-rkbin_git.bb | 11 ++++++++++ > recipes-bsp/u-boot/u-boot-rockchip.inc | 2 ++ > recipes-bsp/u-boot/u-boot_%.bbappend | 5 +++++ > .../linux/linux-torvalds-next_git.bb | 22 +++++++++++++++++++ > 7 files changed, 74 insertions(+) > create mode 100644 conf/machine/include/rk3566.inc > create mode 100644 conf/machine/radxa-zero-3e.conf > create mode 100644 recipes-kernel/linux/linux-torvalds-next_git.bb > > diff --git a/README b/README > index b21e92360dcc..a9a040a4308d 100644 > --- a/README > +++ b/README > @@ -40,6 +40,7 @@ Status of supported boards: > orangepi-5-plus > rock-3a > rock-4c-plus > + radxa-zero-3e > builds: > marsboard-rk3066 > radxarock > diff --git a/conf/machine/include/rk3566.inc b/conf/machine/include/rk3566.inc > new file mode 100644 > index 000000000000..41d0a227a988 > --- /dev/null > +++ b/conf/machine/include/rk3566.inc > @@ -0,0 +1,21 @@ > +SOC_FAMILY = "rk3566" > + > +DEFAULTTUNE ?= "cortexa55" > + > +ROCKCHIP_CLOSED_TPL ?= "1" > + > +require conf/machine/include/soc-family.inc I think the RK3566 is a stripped down version of the RK3568 and the common parts are handled by rk356x.dtsi for example. I'm wondering if we should have the same trick we have for rk3588s and rk3588 to have a common override to not have to maintain variable/function overrides for both SoCs? EDIT: seems like there's a different DDR bin for RK3566 and RK3568, make it make sense. Probably because the RK3568 seems to be able to support ECC on DDR4? > +require conf/machine/include/rockchip-defaults.inc > +require conf/machine/include/arm/armv8-2a/tune-cortexa55.inc > +require conf/machine/include/rockchip-wic.inc > + > +KBUILD_DEFCONFIG ?= "defconfig" > +#KERNEL_FEATURES:append:rk3566 = " bsp/rockchip/remove-non-rockchip-arch-arm64.scc" Did you mean to keep this comment here? > +KERNEL_CLASSES = "kernel-fitimage" > +KERNEL_IMAGETYPE ?= "fitImage" > + > +PREFERRED_PROVIDER_trusted-firmware-a = "rockchip-rkbin" > +PREFERRED_PROVIDER_optee-os = "rockchip-rkbin" > + > +UBOOT_SUFFIX ?= "itb" > +UBOOT_ENTRYPOINT ?= "0x06000000" > diff --git a/conf/machine/radxa-zero-3e.conf b/conf/machine/radxa-zero-3e.conf > new file mode 100644 > index 000000000000..3a39d6c12a1f > --- /dev/null > +++ b/conf/machine/radxa-zero-3e.conf > @@ -0,0 +1,12 @@ > +#@TYPE: Machine > +#@NAME: Radxa Zero 3E > +#@DESCRIPTION: The Radxa ZERO 3e is an ultra-small, high-performance single board computer based on the Rockchip RK3566, with a compact form factor, and rich interfaces. > +#http://radxa.com/products/zeros/zero3e/ > + > +require conf/machine/include/rk3566.inc > + > +PREFERRED_PROVIDER_virtual/kernel = "linux-torvalds-next" > +KERNEL_DEVICETREE = "rockchip/rk3566-radxa-zero-3e.dtb" > +MACHINE_EXTRA_RRECOMMENDS += "kernel-modules" > + > +UBOOT_MACHINE = "radxa-zero-3-rk3566_defconfig" > diff --git a/recipes-bsp/rkbin/rockchip-rkbin_git.bb b/recipes-bsp/rkbin/rockchip-rkbin_git.bb > index 7929c6ac3a10..6894558ef70c 100644 > --- a/recipes-bsp/rkbin/rockchip-rkbin_git.bb > +++ b/recipes-bsp/rkbin/rockchip-rkbin_git.bb > @@ -4,6 +4,7 @@ LIC_FILES_CHKSUM = "file://LICENSE;md5=15faa4a01e7eb0f5d33f9f2bcc7bff62" > > SRC_URI = "git://github.com/rockchip-linux/rkbin;protocol=https;branch=master" > SRCREV = "b4558da0860ca48bf1a571dd33ccba580b9abe23" > +SRCREV:radxa-zero-3e = "a2a0b89b6c8c612dca5ed9ed8a68db8a07f68bc0" > Why not bump the whole rockchip-rkbin recipe? Also is there a reason for bumping it? I already see rk3566 blobs in the current git commit. Not against bumping it, would be nice to explain if there's a reason for it other than "newer is better" (which I am a proponent of :) ). > PROVIDES += "trusted-firmware-a" > PROVIDES += "optee-os" > @@ -15,6 +16,7 @@ S = "${WORKDIR}/git" > COMPATIBLE_MACHINE = "^$" > COMPATIBLE_MACHINE:rk3308 = "rk3308" > COMPATIBLE_MACHINE:rk3568 = "rk3568" > +COMPATIBLE_MACHINE:rk3566 = "rk3566" Maybe order alphabetically here? > COMPATIBLE_MACHINE:rk3588s = "rk3588s" > > PACKAGE_ARCH = "${MACHINE_ARCH}" > @@ -36,6 +38,15 @@ do_deploy:rk3308() { > install -m 644 ${S}/bin/rk33/rk3308_ddr_589MHz_uart?_m0_v*.bin ${DEPLOYDIR}/ddr-rk3308.bin > } > > +do_deploy:rk3566() { > + # Prebuilt TF-A > + install -m 644 ${S}/bin/rk35/rk3568_bl31_v*.elf ${DEPLOYDIR}/bl31-rk3568.elf > + # Prebuilt OPTEE-OS > + install -m 644 ${S}/bin/rk35/rk3568_bl32_v*.bin ${DEPLOYDIR}/tee-rk3568.bin > + # Prebuilt U-Boot TPL (DDR init) > + install -m 644 ${S}/bin/rk35/rk3566_ddr_1056MHz_v1.21.bin ${DEPLOYDIR}/ddr-rk3566.bin Sigh... Rockchip, almost the same SoC but different DRAM init. You could also decide to rename the bl31 and tee to use rk3566 in there to avoid adding custom handling in other recipes. Not sure this obfuscation is good though. > +} > + > do_deploy:rk3568() { > # Prebuilt TF-A > install -m 644 ${S}/bin/rk35/rk3568_bl31_v*.elf ${DEPLOYDIR}/bl31-rk3568.elf > diff --git a/recipes-bsp/u-boot/u-boot-rockchip.inc b/recipes-bsp/u-boot/u-boot-rockchip.inc > index d2267cc53a92..113190635bb5 100644 > --- a/recipes-bsp/u-boot/u-boot-rockchip.inc > +++ b/recipes-bsp/u-boot/u-boot-rockchip.inc > @@ -1,6 +1,8 @@ > BL31:rockchip:aarch64 = "${DEPLOY_DIR_IMAGE}/bl31-${SOC_FAMILY}.elf" > # SOC_FAMILY for RK3588S is rk3588s but it should use the binaries from rk3588 > BL31:rk3588s = "${DEPLOY_DIR_IMAGE}/bl31-rk3588.elf" > +# rk3566 uses the rk3568 bl31 > +BL31:rk3566 = "${DEPLOY_DIR_IMAGE}/bl31-rk3568.elf" Order alphabetically maybe here? > EXTRA_OEMAKE:append:rockchip:aarch64 = " BL31=${BL31}" > > TFA_DEPENDS ??= "" > diff --git a/recipes-bsp/u-boot/u-boot_%.bbappend b/recipes-bsp/u-boot/u-boot_%.bbappend > index 1f5f63459627..dca43d2a4de0 100644 > --- a/recipes-bsp/u-boot/u-boot_%.bbappend > +++ b/recipes-bsp/u-boot/u-boot_%.bbappend > @@ -2,6 +2,11 @@ require u-boot-rockchip.inc > > FILESEXTRAPATHS:prepend := "${THISDIR}/files:" > > +SRC_URI:radxa-zero-3e = "git://github.com/Kwiboo/u-boot-rockchip.git;protocol=https;branch=rk3xxx-2024.07;name=Kwiboo" > +SRC_URI[Kwiboo.sha256sum] = "5d102a658262f6d2d4ea0664fe58b77db4a9eb1ebc89dbd8d6f5e75c9e563810" > +SRCREV:radxa-zero-3e = "8cdf606e616baa36751f3b4adcfaefc781126c8c" > +SRCREV:radxa-zero-3e:rk-u-boot-env = "8cdf606e616baa36751f3b4adcfaefc781126c8c" > + I think a separate recipe here is wiser? They are essentially different sources from a different repo. Although, maybe the generic target is good enough in which case we wouldn't need that at all? > SRC_URI:append:rk-u-boot-env = " file://rockchip-enable-environment-mmc.cfg" > SRCREV:rk-u-boot-env = "cdfcc37428e06f4730ab9a17cc084eeb7676ea1a" > > diff --git a/recipes-kernel/linux/linux-torvalds-next_git.bb b/recipes-kernel/linux/linux-torvalds-next_git.bb > new file mode 100644 > index 000000000000..bbe4689922a7 > --- /dev/null > +++ b/recipes-kernel/linux/linux-torvalds-next_git.bb > @@ -0,0 +1,22 @@ > +inherit kernel > +inherit kernel-yocto > +require recipes-kernel/linux/linux-yocto.inc > + > +FILESEXTRAPATHS:prepend := "${THISDIR}/files:" > + > +DESCRIPTION = "Linux Kernel" > +SECTION = "kernel" > +LICENSE = "GPLv2" Deprecated, should be GPL-2.0-only > +LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46" > + This is usually at the top of the recipe? > + > +LINUX_VERSION = "6.10" Isn't it supposed to be 6.11? I would recommend putting DEFAULT_PREFERENCE = "-1" to make sure it isn't mistakenly pulled implicitly. Maybe even add a COMPATIBLE_MACHINE only for this new board? > +KERNEL_VERSION_SANITY_SKIP = "1" > +SRCREV = "next-20240611" Please use commit hashes and not tags > +PV = "${LINUX_VERSION}+git${SRCPV}" > +SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git;protocol=https;branch=master" > +SRC_URI[sha256sum] = "3a1c433c4ceffa52f8c3df3aab8c379ff91ca658021d409a528825e5e24580f4" > + Is this actually used by Bitbake? It's fetching code through HTTPS via git and git should handle all the integrity there? > +do_compile:append() { > + touch ${B}/Module.symvers > +} That seems odd, can you add a comment on why this is required? Cheers, Quentin ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [yocto-patches] [meta-rockchip][PATCH] radxa-zero-3e: add 2024-06-12 9:03 ` [yocto-patches] " Quentin Schulz @ 2024-06-12 13:33 ` Trevor Woerner 2024-06-12 14:16 ` Quentin Schulz 0 siblings, 1 reply; 4+ messages in thread From: Trevor Woerner @ 2024-06-12 13:33 UTC (permalink / raw) To: yocto-patches On Wed 2024-06-12 @ 11:03:13 AM, Quentin Schulz via lists.yoctoproject.org wrote: > Hi Trevor, > > On 6/12/24 4:01 AM, Trevor Woerner via lists.yoctoproject.org wrote: > > The Radxa ZERO 3e is an ultra-small, high-performance single board computer > > based on the Rockchip RK3566, with a compact form factor, and rich interfaces. > > > > http://radxa.com/products/zeros/zero3e/ > > > > tech specs: > > - Rockchip RK3566 (4x Arm Cortex-A55 @ 1.6GHz) > > - Arm Mali-G52-2EE (OpenGL ES 1.1/2.0/3.0/3.1/3.2, Vulkan 1.1, OpenCL 2.0) > > - LPDDR4 RAM (1/2/3/8 GB) > > - µSD > > - GbE > > - 1x USB 2.0 Type C OTG, 1x USB 3.0 Type C Host > > - 1x µHDMI (1080p @ 60fps) > > - 1x MIPI CSI camera port > > - colour-coded 40-pin GPIO (uart, spi, i2c, pcm/i2s, pwm, gpio) > > - 72mm x 30mm > > > > NOTE: currently support for this board requires a U-Boot fork for the > > bootloader, and linux-next for the kernel. Support will probably come in linux > > kernel 6.11-ish, at which point U-Boot will then use that kernel's device tree > > which means U-Boot support will come after the release of whichever kernel > > includes support for this board. > > > > Jonas has added support for generic builds for some Rockchip SoCs, maybe you > could use that if it provides enough features for now and allows to reach > Linux userspace? > > The target is probably generic-rk3568_defconfig for this board for example. Sounds interesting, I'll take a look. > > Signed-off-by: Trevor Woerner <twoerner@gmail.com> > > --- > > README | 1 + > > conf/machine/include/rk3566.inc | 21 ++++++++++++++++++ > > conf/machine/radxa-zero-3e.conf | 12 ++++++++++ > > recipes-bsp/rkbin/rockchip-rkbin_git.bb | 11 ++++++++++ > > recipes-bsp/u-boot/u-boot-rockchip.inc | 2 ++ > > recipes-bsp/u-boot/u-boot_%.bbappend | 5 +++++ > > .../linux/linux-torvalds-next_git.bb | 22 +++++++++++++++++++ > > 7 files changed, 74 insertions(+) > > create mode 100644 conf/machine/include/rk3566.inc > > create mode 100644 conf/machine/radxa-zero-3e.conf > > create mode 100644 recipes-kernel/linux/linux-torvalds-next_git.bb > > > > diff --git a/README b/README > > index b21e92360dcc..a9a040a4308d 100644 > > --- a/README > > +++ b/README > > @@ -40,6 +40,7 @@ Status of supported boards: > > orangepi-5-plus > > rock-3a > > rock-4c-plus > > + radxa-zero-3e > > builds: > > marsboard-rk3066 > > radxarock > > diff --git a/conf/machine/include/rk3566.inc b/conf/machine/include/rk3566.inc > > new file mode 100644 > > index 000000000000..41d0a227a988 > > --- /dev/null > > +++ b/conf/machine/include/rk3566.inc > @@ -0,0 +1,21 @@ > > +SOC_FAMILY = "rk3566" > > + > > +DEFAULTTUNE ?= "cortexa55" > > + > > +ROCKCHIP_CLOSED_TPL ?= "1" > > + > > +require conf/machine/include/soc-family.inc > > I think the RK3566 is a stripped down version of the RK3568 and the common > parts are handled by rk356x.dtsi for example. > > I'm wondering if we should have the same trick we have for rk3588s and > rk3588 to have a common override to not have to maintain variable/function > overrides for both SoCs? > > EDIT: seems like there's a different DDR bin for RK3566 and RK3568, make it > make sense. Probably because the RK3568 seems to be able to support ECC on > DDR4? > > > +require conf/machine/include/rockchip-defaults.inc > > +require conf/machine/include/arm/armv8-2a/tune-cortexa55.inc > > +require conf/machine/include/rockchip-wic.inc > > + > > +KBUILD_DEFCONFIG ?= "defconfig" > > +#KERNEL_FEATURES:append:rk3566 = " bsp/rockchip/remove-non-rockchip-arch-arm64.scc" > > Did you mean to keep this comment here? I was so excited about it working I wasn't very careful. I actually want to uncomment the line and add the required bits to make this work. > > +KERNEL_CLASSES = "kernel-fitimage" > > +KERNEL_IMAGETYPE ?= "fitImage" > > + > > +PREFERRED_PROVIDER_trusted-firmware-a = "rockchip-rkbin" > > +PREFERRED_PROVIDER_optee-os = "rockchip-rkbin" > > + > > +UBOOT_SUFFIX ?= "itb" > > +UBOOT_ENTRYPOINT ?= "0x06000000" > > diff --git a/conf/machine/radxa-zero-3e.conf b/conf/machine/radxa-zero-3e.conf > > new file mode 100644 > > index 000000000000..3a39d6c12a1f > > --- /dev/null > > +++ b/conf/machine/radxa-zero-3e.conf > > @@ -0,0 +1,12 @@ > > +#@TYPE: Machine > > +#@NAME: Radxa Zero 3E > > +#@DESCRIPTION: The Radxa ZERO 3e is an ultra-small, high-performance single board computer based on the Rockchip RK3566, with a compact form factor, and rich interfaces. > > +#http://radxa.com/products/zeros/zero3e/ > > + > > +require conf/machine/include/rk3566.inc > > + > > +PREFERRED_PROVIDER_virtual/kernel = "linux-torvalds-next" > > +KERNEL_DEVICETREE = "rockchip/rk3566-radxa-zero-3e.dtb" > > +MACHINE_EXTRA_RRECOMMENDS += "kernel-modules" > > + > > +UBOOT_MACHINE = "radxa-zero-3-rk3566_defconfig" > > diff --git a/recipes-bsp/rkbin/rockchip-rkbin_git.bb b/recipes-bsp/rkbin/rockchip-rkbin_git.bb > > index 7929c6ac3a10..6894558ef70c 100644 > > --- a/recipes-bsp/rkbin/rockchip-rkbin_git.bb > > +++ b/recipes-bsp/rkbin/rockchip-rkbin_git.bb > > @@ -4,6 +4,7 @@ LIC_FILES_CHKSUM = "file://LICENSE;md5=15faa4a01e7eb0f5d33f9f2bcc7bff62" > > SRC_URI = "git://github.com/rockchip-linux/rkbin;protocol=https;branch=master" > > SRCREV = "b4558da0860ca48bf1a571dd33ccba580b9abe23" > > +SRCREV:radxa-zero-3e = "a2a0b89b6c8c612dca5ed9ed8a68db8a07f68bc0" > > Why not bump the whole rockchip-rkbin recipe? Also is there a reason for > bumping it? I already see rk3566 blobs in the current git commit. Not > against bumping it, would be nice to explain if there's a reason for it > other than "newer is better" (which I am a proponent of :) ). We've seen cases where newer wasn't better. The newer blobs for rk3308, for example, took away the ability to read the console during this phase. Playing it safe I decided to just bump it for the new device and leave the rest the same. I'll bump it for all, but I'll have to test on all the ones I care about before submitting. > > PROVIDES += "trusted-firmware-a" > > PROVIDES += "optee-os" > > @@ -15,6 +16,7 @@ S = "${WORKDIR}/git" > > COMPATIBLE_MACHINE = "^$" > > COMPATIBLE_MACHINE:rk3308 = "rk3308" > > COMPATIBLE_MACHINE:rk3568 = "rk3568" > > +COMPATIBLE_MACHINE:rk3566 = "rk3566" > > Maybe order alphabetically here? Oops, yes. > > COMPATIBLE_MACHINE:rk3588s = "rk3588s" > > PACKAGE_ARCH = "${MACHINE_ARCH}" > > @@ -36,6 +38,15 @@ do_deploy:rk3308() { > > install -m 644 ${S}/bin/rk33/rk3308_ddr_589MHz_uart?_m0_v*.bin ${DEPLOYDIR}/ddr-rk3308.bin > > } > > +do_deploy:rk3566() { > > + # Prebuilt TF-A > > + install -m 644 ${S}/bin/rk35/rk3568_bl31_v*.elf ${DEPLOYDIR}/bl31-rk3568.elf > > + # Prebuilt OPTEE-OS > > + install -m 644 ${S}/bin/rk35/rk3568_bl32_v*.bin ${DEPLOYDIR}/tee-rk3568.bin > > + # Prebuilt U-Boot TPL (DDR init) > > + install -m 644 ${S}/bin/rk35/rk3566_ddr_1056MHz_v1.21.bin ${DEPLOYDIR}/ddr-rk3566.bin > > Sigh... Rockchip, almost the same SoC but different DRAM init. > > You could also decide to rename the bl31 and tee to use rk3566 in there to > avoid adding custom handling in other recipes. Not sure this obfuscation is > good though. I'll look at that. > > +} > > + > > do_deploy:rk3568() { > > # Prebuilt TF-A > > install -m 644 ${S}/bin/rk35/rk3568_bl31_v*.elf ${DEPLOYDIR}/bl31-rk3568.elf > > diff --git a/recipes-bsp/u-boot/u-boot-rockchip.inc b/recipes-bsp/u-boot/u-boot-rockchip.inc > > index d2267cc53a92..113190635bb5 100644 > > --- a/recipes-bsp/u-boot/u-boot-rockchip.inc > > +++ b/recipes-bsp/u-boot/u-boot-rockchip.inc > > @@ -1,6 +1,8 @@ > > BL31:rockchip:aarch64 = "${DEPLOY_DIR_IMAGE}/bl31-${SOC_FAMILY}.elf" > > # SOC_FAMILY for RK3588S is rk3588s but it should use the binaries from rk3588 > > BL31:rk3588s = "${DEPLOY_DIR_IMAGE}/bl31-rk3588.elf" > > +# rk3566 uses the rk3568 bl31 > > +BL31:rk3566 = "${DEPLOY_DIR_IMAGE}/bl31-rk3568.elf" > > Order alphabetically maybe here? Oops. > > EXTRA_OEMAKE:append:rockchip:aarch64 = " BL31=${BL31}" > > TFA_DEPENDS ??= "" > > diff --git a/recipes-bsp/u-boot/u-boot_%.bbappend b/recipes-bsp/u-boot/u-boot_%.bbappend > > index 1f5f63459627..dca43d2a4de0 100644 > > --- a/recipes-bsp/u-boot/u-boot_%.bbappend > > +++ b/recipes-bsp/u-boot/u-boot_%.bbappend > > @@ -2,6 +2,11 @@ require u-boot-rockchip.inc > > FILESEXTRAPATHS:prepend := "${THISDIR}/files:" > > +SRC_URI:radxa-zero-3e = "git://github.com/Kwiboo/u-boot-rockchip.git;protocol=https;branch=rk3xxx-2024.07;name=Kwiboo" > > +SRC_URI[Kwiboo.sha256sum] = "5d102a658262f6d2d4ea0664fe58b77db4a9eb1ebc89dbd8d6f5e75c9e563810" > > +SRCREV:radxa-zero-3e = "8cdf606e616baa36751f3b4adcfaefc781126c8c" > > +SRCREV:radxa-zero-3e:rk-u-boot-env = "8cdf606e616baa36751f3b4adcfaefc781126c8c" > > + > > I think a separate recipe here is wiser? They are essentially different > sources from a different repo. Although, maybe the generic target is good > enough in which case we wouldn't need that at all? I tried that originally, but the build requires u-boot-extlinux, which can't be satisfied with a new u-boot-kwiboo (?) recipe. I figured the loops to jump through to provide u-boot-extlinux with a new recipe wasn't worth the effort (unless there's some trick I haven't seen before). > > SRC_URI:append:rk-u-boot-env = " file://rockchip-enable-environment-mmc.cfg" > > SRCREV:rk-u-boot-env = "cdfcc37428e06f4730ab9a17cc084eeb7676ea1a" > > diff --git a/recipes-kernel/linux/linux-torvalds-next_git.bb b/recipes-kernel/linux/linux-torvalds-next_git.bb > > new file mode 100644 > > index 000000000000..bbe4689922a7 > > --- /dev/null > > +++ b/recipes-kernel/linux/linux-torvalds-next_git.bb > > @@ -0,0 +1,22 @@ > > +inherit kernel > > +inherit kernel-yocto > > +require recipes-kernel/linux/linux-yocto.inc > > + > > +FILESEXTRAPATHS:prepend := "${THISDIR}/files:" > > + > > +DESCRIPTION = "Linux Kernel" > > +SECTION = "kernel" > > +LICENSE = "GPLv2" > > Deprecated, should be > GPL-2.0-only > > > +LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46" > > + > > This is usually at the top of the recipe? > > > + > > +LINUX_VERSION = "6.10" > > Isn't it supposed to be 6.11? It's actually 6.10-rc3, according to the Makefile. > I would recommend putting > DEFAULT_PREFERENCE = "-1" > > to make sure it isn't mistakenly pulled implicitly. > > Maybe even add a COMPATIBLE_MACHINE only for this new board? > > > +KERNEL_VERSION_SANITY_SKIP = "1" > > +SRCREV = "next-20240611" > > Please use commit hashes and not tags I know that's the convention, but is there an explanation for why? A commit hash tells me nothing, but a tag that says "next-20240611" gives me several pieces of information. If it works and it provides useful information, why not use the tag? > > +PV = "${LINUX_VERSION}+git${SRCPV}" > > +SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git;protocol=https;branch=master" > > +SRC_URI[sha256sum] = "3a1c433c4ceffa52f8c3df3aab8c379ff91ca658021d409a528825e5e24580f4" > > + > > Is this actually used by Bitbake? It's fetching code through HTTPS via git > and git should handle all the integrity there? > > > +do_compile:append() { > > + touch ${B}/Module.symvers > > +} > > That seems odd, can you add a comment on why this is required? This entire kernel recipe comes from an ancient template I had lying around for cases like this. It's entirely done by copying it in and adjusting until it works. I'll give it a more careful pass for #2. ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [yocto-patches] [meta-rockchip][PATCH] radxa-zero-3e: add 2024-06-12 13:33 ` Trevor Woerner @ 2024-06-12 14:16 ` Quentin Schulz 0 siblings, 0 replies; 4+ messages in thread From: Quentin Schulz @ 2024-06-12 14:16 UTC (permalink / raw) To: yocto-patches Hi Trevor, On 6/12/24 3:33 PM, Trevor Woerner via lists.yoctoproject.org wrote: > On Wed 2024-06-12 @ 11:03:13 AM, Quentin Schulz via lists.yoctoproject.org wrote: >> Hi Trevor, >> >> On 6/12/24 4:01 AM, Trevor Woerner via lists.yoctoproject.org wrote: [...] >>> diff --git a/recipes-bsp/rkbin/rockchip-rkbin_git.bb b/recipes-bsp/rkbin/rockchip-rkbin_git.bb >>> index 7929c6ac3a10..6894558ef70c 100644 >>> --- a/recipes-bsp/rkbin/rockchip-rkbin_git.bb >>> +++ b/recipes-bsp/rkbin/rockchip-rkbin_git.bb >>> @@ -4,6 +4,7 @@ LIC_FILES_CHKSUM = "file://LICENSE;md5=15faa4a01e7eb0f5d33f9f2bcc7bff62" >>> SRC_URI = "git://github.com/rockchip-linux/rkbin;protocol=https;branch=master" >>> SRCREV = "b4558da0860ca48bf1a571dd33ccba580b9abe23" >>> +SRCREV:radxa-zero-3e = "a2a0b89b6c8c612dca5ed9ed8a68db8a07f68bc0" >> >> Why not bump the whole rockchip-rkbin recipe? Also is there a reason for >> bumping it? I already see rk3566 blobs in the current git commit. Not >> against bumping it, would be nice to explain if there's a reason for it >> other than "newer is better" (which I am a proponent of :) ). > > We've seen cases where newer wasn't better. The newer blobs for rk3308, for > example, took away the ability to read the console during this phase. Playing > it safe I decided to just bump it for the new device and leave the rest the > same. > Fair. Still waiting for Rockchip to release an open-source version of this ddrbin_tool to be able to change a few params of the binary. I was told "they agree to release an opensource version of ddrbin_tool in near future" a month and a half ago. Maybe one day :) > I'll bump it for all, but I'll have to test on all the ones I care about > before submitting. > Better err on the side of caution indeed. [...] >>> diff --git a/recipes-bsp/u-boot/u-boot_%.bbappend b/recipes-bsp/u-boot/u-boot_%.bbappend >>> index 1f5f63459627..dca43d2a4de0 100644 >>> --- a/recipes-bsp/u-boot/u-boot_%.bbappend >>> +++ b/recipes-bsp/u-boot/u-boot_%.bbappend >>> @@ -2,6 +2,11 @@ require u-boot-rockchip.inc >>> FILESEXTRAPATHS:prepend := "${THISDIR}/files:" >>> +SRC_URI:radxa-zero-3e = "git://github.com/Kwiboo/u-boot-rockchip.git;protocol=https;branch=rk3xxx-2024.07;name=Kwiboo" >>> +SRC_URI[Kwiboo.sha256sum] = "5d102a658262f6d2d4ea0664fe58b77db4a9eb1ebc89dbd8d6f5e75c9e563810" >>> +SRCREV:radxa-zero-3e = "8cdf606e616baa36751f3b4adcfaefc781126c8c" >>> +SRCREV:radxa-zero-3e:rk-u-boot-env = "8cdf606e616baa36751f3b4adcfaefc781126c8c" >>> + >> >> I think a separate recipe here is wiser? They are essentially different >> sources from a different repo. Although, maybe the generic target is good >> enough in which case we wouldn't need that at all? > > I tried that originally, but the build requires u-boot-extlinux, which can't > be satisfied with a new u-boot-kwiboo (?) recipe. I figured the loops to jump > through to provide u-boot-extlinux with a new recipe wasn't worth the effort > (unless there's some trick I haven't seen before). > https://git.embedded.cherry.de/yocto-layers/meta-cherry-es.git/commit/meta-bsp/recipes-bsp/u-boot/u-boot-cherry-es.inc?id=b2a57b4a767a7e77ba430eb2255db79e0aad9996 this is what I did in my tree for my own recipe of downstream U-Boot (you wouldn't need everything, just the anonymous function if I remember correctly). >>> SRC_URI:append:rk-u-boot-env = " file://rockchip-enable-environment-mmc.cfg" >>> SRCREV:rk-u-boot-env = "cdfcc37428e06f4730ab9a17cc084eeb7676ea1a" >>> diff --git a/recipes-kernel/linux/linux-torvalds-next_git.bb b/recipes-kernel/linux/linux-torvalds-next_git.bb >>> new file mode 100644 >>> index 000000000000..bbe4689922a7 >>> --- /dev/null >>> +++ b/recipes-kernel/linux/linux-torvalds-next_git.bb >>> @@ -0,0 +1,22 @@ >>> +inherit kernel >>> +inherit kernel-yocto >>> +require recipes-kernel/linux/linux-yocto.inc >>> + >>> +FILESEXTRAPATHS:prepend := "${THISDIR}/files:" >>> + >>> +DESCRIPTION = "Linux Kernel" >>> +SECTION = "kernel" >>> +LICENSE = "GPLv2" >> >> Deprecated, should be >> GPL-2.0-only >> >>> +LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46" >>> + >> >> This is usually at the top of the recipe? >> >>> + >>> +LINUX_VERSION = "6.10" >> >> Isn't it supposed to be 6.11? > > It's actually 6.10-rc3, according to the Makefile. > OK, kind of a blurry line here as it is some in-between version which is supposed to become v6.11 one day but is currently just freely based on master branch, whose Makefile version if v6.10-rc<something>. [...] >>> +KERNEL_VERSION_SANITY_SKIP = "1" >>> +SRCREV = "next-20240611" >> >> Please use commit hashes and not tags > > I know that's the convention, but is there an explanation for why? A commit > hash tells me nothing, but a tag that says "next-20240611" gives me several > pieces of information. If it works and it provides useful information, why > not use the tag? > 1) I am surprised this even worked, I was under the impression that only full hashes could be used in SRCREV, but https://docs.yoctoproject.org/ref-manual/variables.html#term-SRCREV only warns you to NOT do it 2) tags are movable git objects, so if it moves after someone has pulled it locally, another person will fetch other sources without even knowing. But the first person rebuilding will never get the new sources. 3) You're supposed to use the ;tag= parameter in the git fetcher for that. This will handle tags moving around so you're sure that if it moves around, you get the new sources, and everybody does. The issue is that it requires network access for every build. Tags moving around aren't theoretical issues. I worked in a company that has done this multiple times in the few years I worked for them. Yocto Project/OE itself has done this a few times already. Cheers, Quentin ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2024-06-12 14:16 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2024-06-12 2:01 [meta-rockchip][PATCH] radxa-zero-3e: add Trevor Woerner 2024-06-12 9:03 ` [yocto-patches] " Quentin Schulz 2024-06-12 13:33 ` Trevor Woerner 2024-06-12 14:16 ` Quentin Schulz
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.