All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sebastian Kropatsch <seb-dev@mail.de>
To: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 4/5] arm64: dts: rockchip: Enable lower USB3 port on NanoPi R6C/R6S
Date: Wed, 12 Jun 2024 22:48:13 +0200	[thread overview]
Message-ID: <20240612205056.397204-5-seb-dev@mail.de> (raw)
In-Reply-To: <20240612205056.397204-1-seb-dev@mail.de>

Enable support for the lower USB 3.0 Type-A port on the NanoPi R6C and
NanoPi R6S. The upper USB 2.0 Type-A port is already supported.

Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
---
 .../boot/dts/rockchip/rk3588s-nanopi-r6.dtsi  | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
index 69d0f1f2349b..9676e7194451 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
@@ -740,6 +740,17 @@ &tsadc {
 	status = "okay";
 };
 
+/* USB2 PHY for USB 3.0 Type-A (lower port)*/
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg0>;
+	status = "okay";
+};
+
+/* USB2 PHY for USB 2.0 Type-A (upper port)*/
 &u2phy2 {
 	status = "okay";
 };
@@ -755,10 +766,27 @@ &uart2 {
 	status = "okay";
 };
 
+/* USB 2.0 Type-A (upper port) */
+/* PHY: <&u2phy2_host> */
 &usb_host0_ehci {
 	status = "okay";
 };
 
+/* USB 2.0 Type-A (upper port) */
+/* PHY: <&u2phy2_host> */
 &usb_host0_ohci {
 	status = "okay";
 };
+
+/* USB 3.0 Type-A (lower port) */
+/* PHYs: <&u2phy0_otg>, <&usbdp_phy0> */
+&usb_host0_xhci {
+	dr_mode = "host";
+	extcon = <&u2phy0>;
+	status = "okay";
+};
+
+/* USB3 PHY for USB 3.0 Type-A (lower port)*/
+&usbdp_phy0 {
+	status = "okay";
+};
-- 
2.43.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID (diff)
From: Sebastian Kropatsch <seb-dev@mail.de>
To: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 4/5] arm64: dts: rockchip: Enable lower USB3 port on NanoPi R6C/R6S
Date: Wed, 12 Jun 2024 22:48:13 +0200	[thread overview]
Message-ID: <20240612205056.397204-5-seb-dev@mail.de> (raw)
In-Reply-To: <20240612205056.397204-1-seb-dev@mail.de>

Enable support for the lower USB 3.0 Type-A port on the NanoPi R6C and
NanoPi R6S. The upper USB 2.0 Type-A port is already supported.

Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
---
 .../boot/dts/rockchip/rk3588s-nanopi-r6.dtsi  | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
index 69d0f1f2349b..9676e7194451 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
@@ -740,6 +740,17 @@ &tsadc {
 	status = "okay";
 };
 
+/* USB2 PHY for USB 3.0 Type-A (lower port)*/
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	phy-supply = <&vcc5v0_usb_otg0>;
+	status = "okay";
+};
+
+/* USB2 PHY for USB 2.0 Type-A (upper port)*/
 &u2phy2 {
 	status = "okay";
 };
@@ -755,10 +766,27 @@ &uart2 {
 	status = "okay";
 };
 
+/* USB 2.0 Type-A (upper port) */
+/* PHY: <&u2phy2_host> */
 &usb_host0_ehci {
 	status = "okay";
 };
 
+/* USB 2.0 Type-A (upper port) */
+/* PHY: <&u2phy2_host> */
 &usb_host0_ohci {
 	status = "okay";
 };
+
+/* USB 3.0 Type-A (lower port) */
+/* PHYs: <&u2phy0_otg>, <&usbdp_phy0> */
+&usb_host0_xhci {
+	dr_mode = "host";
+	extcon = <&u2phy0>;
+	status = "okay";
+};
+
+/* USB3 PHY for USB 3.0 Type-A (lower port)*/
+&usbdp_phy0 {
+	status = "okay";
+};
-- 
2.43.0



  parent reply	other threads:[~2024-06-12 20:54 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-12 20:48 [PATCH 0/5] Refactor, fix and improve NanoPi R6 series Sebastian Kropatsch
2024-06-12 20:48 ` Sebastian Kropatsch
2024-06-12 20:48 ` [PATCH 1/5] arm64: dts: rockchip: Add common definitions for NanoPi R6C and R6S Sebastian Kropatsch
2024-06-12 20:48   ` Sebastian Kropatsch
2024-06-20 18:34   ` Heiko Stübner
2024-06-20 18:34     ` Heiko Stübner
2024-06-12 20:48 ` [PATCH 2/5] arm64: dts: rockchip: Fix regulators, gmac and naming on NanoPi R6C/R6S Sebastian Kropatsch
2024-06-12 20:48   ` Sebastian Kropatsch
2024-06-20 18:39   ` Heiko Stübner
2024-06-20 18:39     ` Heiko Stübner
2024-06-20 21:48     ` Sebastian Kropatsch
2024-06-20 21:48       ` Sebastian Kropatsch
2024-06-12 20:48 ` [PATCH 3/5] arm64: dts: rockchip: Improve LEDs " Sebastian Kropatsch
2024-06-12 20:48   ` Sebastian Kropatsch
2024-06-14 15:10   ` kernel test robot
2024-06-14 15:10     ` kernel test robot
2024-06-20 18:42   ` Heiko Stübner
2024-06-20 18:42     ` Heiko Stübner
2024-06-20 21:51     ` Sebastian Kropatsch
2024-06-20 21:51       ` Sebastian Kropatsch
2024-06-12 20:48 ` Sebastian Kropatsch [this message]
2024-06-12 20:48   ` [PATCH 4/5] arm64: dts: rockchip: Enable lower USB3 port " Sebastian Kropatsch
2024-06-12 20:48 ` [PATCH 5/5] arm64: dts: rockchip: Enable GPU " Sebastian Kropatsch
2024-06-12 20:48   ` Sebastian Kropatsch
2024-06-13 17:27 ` [PATCH 0/5] Refactor, fix and improve NanoPi R6 series Rob Herring (Arm)
2024-06-13 17:27   ` Rob Herring (Arm)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240612205056.397204-5-seb-dev@mail.de \
    --to=seb-dev@mail.de \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.