All of lore.kernel.org
 help / color / mirror / Atom feed
From: kernel test robot <lkp@intel.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device
Date: Mon, 17 Jun 2024 04:04:17 +0800	[thread overview]
Message-ID: <202406170350.zQo7bJdX-lkp@intel.com> (raw)
In-Reply-To: <20240613152425.1582059-3-peteryin.openbmc@gmail.com>

Hi Peter,

kernel test robot noticed the following build warnings:

[auto build test WARNING on robh/for-next]
[also build test WARNING on linus/master v6.10-rc3 next-20240613]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Peter-Yin/ARM-dts-aspeed-Harma-revise-hsc-chip/20240613-232915
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link:    https://lore.kernel.org/r/20240613152425.1582059-3-peteryin.openbmc%40gmail.com
patch subject: [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device
config: arm-randconfig-051-20240614 (https://download.01.org/0day-ci/archive/20240617/202406170350.zQo7bJdX-lkp at intel.com/config)
compiler: arm-linux-gnueabi-gcc (GCC) 13.2.0
dtschema version: 2024.6.dev1+g833054f
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240617/202406170350.zQo7bJdX-lkp at intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202406170350.zQo7bJdX-lkp at intel.com/

dtcheck warnings: (new ones prefixed by >>)
>> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts:409.21-412.6: Warning (i2c_bus_reg): /ahb/apb/bus at 1e78a000/i2c-bus at 700/i2c-mux at 70/i2c at 0/power-monitor at 63: I2C bus unit address format error, expected "61"
   arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:655.36-659.7: Warning (unique_unit_address_if_enabled): /ahb/apb/lpc at 1e789000/reset-controller at 98: duplicate unit-address (also used in node /ahb/apb/lpc at 1e789000/uart-routing at 98)
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /: spi-gpio: {'status': ['okay'], 'compatible': ['spi-gpio'], '#address-cells': [[1]], '#size-cells': [[0]], 'gpio-sck': [[58, 203, 0]], 'gpio-mosi': [[58, 204, 0]], 'gpio-miso': [[58, 205, 0]], 'num-chipselects': [[1]], 'cs-gpios': [[58, 200, 1]], 'tpmdev at 0': {'compatible': ['infineon,slb9670', 'tcg,tpm_tis-spi'], 'spi-max-frequency': [[33000000]], 'reg': [[0]]}} is not of type 'array'
   	from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
   	from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /sdram at 1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: bus at 1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
   	from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: ftgmac at 1e660000: $nodename:0: 'ftgmac at 1e660000' does not match '^ethernet(@.*)?$'
   	from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml#
--
   	from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/sdc at 1e740000/sdhci at 1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/sdc at 1e740000/sdhci at 1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: serial at 1e78d000: pinctrl-0: True is not of type 'array'
   	from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-consumer.yaml#
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: serial at 1e78f000: pinctrl-0: True is not of type 'array'
   	from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-consumer.yaml#
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus at 1e78a000/i2c-bus at 80/pwm at 5e: failed to match any schema with compatible: ['max31790']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus at 1e78a000/i2c-bus at 180/pwm at 5e: failed to match any schema with compatible: ['max31790']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus at 1e78a000/i2c-bus at 280/power-monitor at 69: failed to match any schema with compatible: ['pmbus']
>> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus at 1e78a000/i2c-bus at 700/i2c-mux at 70/i2c at 0/power-monitor at 61: failed to match any schema with compatible: ['isil,isl69260']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus at 1e78a000/i2c-bus at 700/i2c-mux at 70/i2c at 0/power-monitor at 62: failed to match any schema with compatible: ['isil,isl69260']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus at 1e78a000/i2c-bus at 700/i2c-mux at 70/i2c at 0/power-monitor at 63: failed to match any schema with compatible: ['isil,isl69260']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus at 1e78a000/i2c-bus at 780/ipmb at 10: failed to match any schema with compatible: ['ipmb-dev']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi at 1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi at 1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi at 1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi at 1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/dma-controller at 1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: spi-gpio: $nodename:0: 'spi-gpio' does not match '^spi(@.*|-([0-9]|[1-9][0-9]+))?$'
   	from schema $id: http://devicetree.org/schemas/spi/spi-gpio.yaml#

vim +/61 +409 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts

   387	
   388	&i2c13 {
   389		status = "okay";
   390	
   391		i2c-mux at 70 {
   392			compatible = "nxp,pca9545";
   393			reg = <0x70>;
   394			#address-cells = <1>;
   395			#size-cells = <0>;
   396	
   397			imux28: i2c at 0 {
   398				#address-cells = <1>;
   399				#size-cells = <0>;
   400				reg = <0>;
   401				power-monitor at 61 {
   402					compatible = "isil,isl69260";
   403					reg = <0x61>;
   404				};
   405				power-monitor at 62 {
   406					compatible = "isil,isl69260";
   407					reg = <0x62>;
   408				};
 > 409				power-monitor at 63 {
   410					compatible = "isil,isl69260";
   411					reg = <0x61>;
   412				};
   413				power-monitor at 64 {
   414					compatible = "infineon,xdpe152c4";
   415					reg = <0x64>;
   416				};
   417				power-monitor at 66 {
   418					compatible = "infineon,xdpe152c4";
   419					reg = <0x66>;
   420				};
   421				power-monitor at 68 {
   422					compatible = "infineon,xdpe152c4";
   423					reg = <0x68>;
   424				};
   425			};
   426			imux29: i2c at 1 {
   427				#address-cells = <1>;
   428				#size-cells = <0>;
   429				reg = <1>;
   430				//MB FRU
   431				eeprom at 54 {
   432					compatible = "atmel,24c64";
   433					reg = <0x54>;
   434				};
   435			};
   436			imux30: i2c at 2 {
   437				#address-cells = <1>;
   438				#size-cells = <0>;
   439				reg = <2>;
   440			};
   441			imux31: i2c at 3 {
   442				#address-cells = <1>;
   443				#size-cells = <0>;
   444				reg = <3>;
   445			};
   446		};
   447	};
   448	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

WARNING: multiple messages have this Message-ID (diff)
From: kernel test robot <lkp@intel.com>
To: Peter Yin <peteryin.openbmc@gmail.com>,
	patrick@stwcx.xyz, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
	Andrew Jeffery <andrew@codeconstruct.com.au>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Cc: oe-kbuild-all@lists.linux.dev
Subject: Re: [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device
Date: Mon, 17 Jun 2024 04:04:17 +0800	[thread overview]
Message-ID: <202406170350.zQo7bJdX-lkp@intel.com> (raw)
In-Reply-To: <20240613152425.1582059-3-peteryin.openbmc@gmail.com>

Hi Peter,

kernel test robot noticed the following build warnings:

[auto build test WARNING on robh/for-next]
[also build test WARNING on linus/master v6.10-rc3 next-20240613]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Peter-Yin/ARM-dts-aspeed-Harma-revise-hsc-chip/20240613-232915
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link:    https://lore.kernel.org/r/20240613152425.1582059-3-peteryin.openbmc%40gmail.com
patch subject: [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device
config: arm-randconfig-051-20240614 (https://download.01.org/0day-ci/archive/20240617/202406170350.zQo7bJdX-lkp@intel.com/config)
compiler: arm-linux-gnueabi-gcc (GCC) 13.2.0
dtschema version: 2024.6.dev1+g833054f
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240617/202406170350.zQo7bJdX-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202406170350.zQo7bJdX-lkp@intel.com/

dtcheck warnings: (new ones prefixed by >>)
>> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts:409.21-412.6: Warning (i2c_bus_reg): /ahb/apb/bus@1e78a000/i2c-bus@700/i2c-mux@70/i2c@0/power-monitor@63: I2C bus unit address format error, expected "61"
   arch/arm/boot/dts/aspeed/aspeed-g6.dtsi:655.36-659.7: Warning (unique_unit_address_if_enabled): /ahb/apb/lpc@1e789000/reset-controller@98: duplicate unit-address (also used in node /ahb/apb/lpc@1e789000/uart-routing@98)
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /: spi-gpio: {'status': ['okay'], 'compatible': ['spi-gpio'], '#address-cells': [[1]], '#size-cells': [[0]], 'gpio-sck': [[58, 203, 0]], 'gpio-mosi': [[58, 204, 0]], 'gpio-miso': [[58, 205, 0]], 'num-chipselects': [[1]], 'cs-gpios': [[58, 200, 1]], 'tpmdev@0': {'compatible': ['infineon,slb9670', 'tcg,tpm_tis-spi'], 'spi-max-frequency': [[33000000]], 'reg': [[0]]}} is not of type 'array'
   	from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
   	from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: bus@1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
   	from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: ftgmac@1e660000: $nodename:0: 'ftgmac@1e660000' does not match '^ethernet(@.*)?$'
   	from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml#
--
   	from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: serial@1e78d000: pinctrl-0: True is not of type 'array'
   	from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-consumer.yaml#
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: serial@1e78f000: pinctrl-0: True is not of type 'array'
   	from schema $id: http://devicetree.org/schemas/pinctrl/pinctrl-consumer.yaml#
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@80/pwm@5e: failed to match any schema with compatible: ['max31790']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@180/pwm@5e: failed to match any schema with compatible: ['max31790']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@280/power-monitor@69: failed to match any schema with compatible: ['pmbus']
>> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@700/i2c-mux@70/i2c@0/power-monitor@61: failed to match any schema with compatible: ['isil,isl69260']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@700/i2c-mux@70/i2c@0/power-monitor@62: failed to match any schema with compatible: ['isil,isl69260']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@700/i2c-mux@70/i2c@0/power-monitor@63: failed to match any schema with compatible: ['isil,isl69260']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/bus@1e78a000/i2c-bus@780/ipmb@10: failed to match any schema with compatible: ['ipmb-dev']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dtb: spi-gpio: $nodename:0: 'spi-gpio' does not match '^spi(@.*|-([0-9]|[1-9][0-9]+))?$'
   	from schema $id: http://devicetree.org/schemas/spi/spi-gpio.yaml#

vim +/61 +409 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts

   387	
   388	&i2c13 {
   389		status = "okay";
   390	
   391		i2c-mux@70 {
   392			compatible = "nxp,pca9545";
   393			reg = <0x70>;
   394			#address-cells = <1>;
   395			#size-cells = <0>;
   396	
   397			imux28: i2c@0 {
   398				#address-cells = <1>;
   399				#size-cells = <0>;
   400				reg = <0>;
   401				power-monitor@61 {
   402					compatible = "isil,isl69260";
   403					reg = <0x61>;
   404				};
   405				power-monitor@62 {
   406					compatible = "isil,isl69260";
   407					reg = <0x62>;
   408				};
 > 409				power-monitor@63 {
   410					compatible = "isil,isl69260";
   411					reg = <0x61>;
   412				};
   413				power-monitor@64 {
   414					compatible = "infineon,xdpe152c4";
   415					reg = <0x64>;
   416				};
   417				power-monitor@66 {
   418					compatible = "infineon,xdpe152c4";
   419					reg = <0x66>;
   420				};
   421				power-monitor@68 {
   422					compatible = "infineon,xdpe152c4";
   423					reg = <0x68>;
   424				};
   425			};
   426			imux29: i2c@1 {
   427				#address-cells = <1>;
   428				#size-cells = <0>;
   429				reg = <1>;
   430				//MB FRU
   431				eeprom@54 {
   432					compatible = "atmel,24c64";
   433					reg = <0x54>;
   434				};
   435			};
   436			imux30: i2c@2 {
   437				#address-cells = <1>;
   438				#size-cells = <0>;
   439				reg = <2>;
   440			};
   441			imux31: i2c@3 {
   442				#address-cells = <1>;
   443				#size-cells = <0>;
   444				reg = <3>;
   445			};
   446		};
   447	};
   448	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

  reply	other threads:[~2024-06-16 20:04 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-13 15:24 [PATCH v1 0/7] Revise Meta(Facebook) Harma BMC(AST2600) Peter Yin
2024-06-13 15:24 ` Peter Yin
2024-06-13 15:24 ` [PATCH v1 1/7] ARM: dts: aspeed: Harma: revise hsc chip Peter Yin
2024-06-13 15:24   ` Peter Yin
2024-06-13 15:24 ` [PATCH v1 2/7] ARM: dts: aspeed: Harma: add VR device Peter Yin
2024-06-13 15:24   ` Peter Yin
2024-06-16 20:04   ` kernel test robot [this message]
2024-06-16 20:04     ` kernel test robot
2024-06-13 15:24 ` [PATCH v1 3/7] ARM: dts: aspeed: Harma: add sgpio name Peter Yin
2024-06-13 15:24   ` Peter Yin
2024-06-13 15:24 ` [PATCH v1 4/7] ARM: dts: aspeed: Harma: add ina238 Peter Yin
2024-06-13 15:24   ` Peter Yin
2024-06-13 15:24 ` [PATCH v1 5/7] ARM: dts: aspeed: Harma: add power monitor xdp710 Peter Yin
2024-06-13 15:24   ` Peter Yin
2024-06-13 15:24 ` [PATCH v1 6/7] ARM: dts: aspeed: Harma: remove multi-host property Peter Yin
2024-06-13 15:24   ` Peter Yin
2024-06-17 19:18   ` kernel test robot
2024-06-17 19:18     ` kernel test robot
2024-06-17 23:50     ` Andrew Jeffery
2024-06-17 23:50       ` Andrew Jeffery
2024-06-13 15:24 ` [PATCH v1 7/7] ARM: dts: aspeed: Harma: remove pca9546 Peter Yin
2024-06-13 15:24   ` Peter Yin
2024-06-17  7:41   ` Andrew Jeffery
2024-06-17  7:41     ` Andrew Jeffery

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=202406170350.zQo7bJdX-lkp@intel.com \
    --to=lkp@intel.com \
    --cc=linux-aspeed@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.