[PATCH v2 0/3] Add thermal management support for STi platform

[Raphael Gallais-Pou <rgallaispou@gmail.com>]

This patch series enhances the st_thermal driver in order to enable
support for thermal zones. The changes include:

1. Replace deprecated PM runtime macros with their updated counterparts.
2. Implementing devm_* based thermal of zone functions within the driver.
3. Updating the stih418 device-tree.

The device-tree patch depends on an earlier patch sent to the mailing
list [1].

As it is currently implemented, an alert threshold of 85°C is set to
trigger the CPU throttling, and when the temperature exceeds the
critical threshold of 95°C, the system shuts down. There is for now no
active cooling device on the platform, which explains the use of the
cpufreq framework.

[1] https://lore.kernel.org/lkml/20240320-thermal-v3-2-700296694c4a@gmail.com

Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
---
Changes in v2:
- Add Patrice's R-b
- Edit patch [2/3] to remove unused struct
- Link to v1: https://lore.kernel.org/r/20240518-thermal-v1-0-7dfca3ed454b@gmail.com

---
Raphael Gallais-Pou (3):
      thermal: st: switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
      thermal: sti: depend on THERMAL_OF subsystem
      ARM: dts: sti: add thermal-zones support on stih418

 arch/arm/boot/dts/st/stih407-family.dtsi |  6 +++--
 arch/arm/boot/dts/st/stih418.dtsi        | 41 +++++++++++++++++++++++++++++---
 drivers/thermal/st/Kconfig               |  1 +
 drivers/thermal/st/st_thermal.c          | 29 +++++++++-------------
 drivers/thermal/st/st_thermal_memmap.c   |  2 +-
 drivers/thermal/st/stm_thermal.c         |  8 +++----
 6 files changed, 58 insertions(+), 29 deletions(-)
---
base-commit: 0fc4bfab2cd45f9acb86c4f04b5191e114e901ed
change-id: 20240518-thermal-8f625428acf9

Best regards,
-- 
Raphael Gallais-Pou <rgallaispou@gmail.com>