From: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
To: "David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Jesse Brandeburg <jesse.brandeburg@intel.com>,
Tony Nguyen <anthony.l.nguyen@intel.com>,
Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org,
linux-kernel@vger.kernel.org, stable@vger.kernel.org,
Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Subject: [Intel-wired-lan] [PATCH net 1/1] igc: Fix double reset adapter triggered from a single taprio cmd
Date: Tue, 25 Jun 2024 04:26:56 -0400 [thread overview]
Message-ID: <20240625082656.2702440-1-faizal.abdul.rahim@linux.intel.com> (raw)
Following the implementation of "igc: Add TransmissionOverrun counter"
patch, when a taprio command is triggered by user, igc processes two
commands: TAPRIO_CMD_REPLACE followed by TAPRIO_CMD_STATS. However, both
commands unconditionally pass through igc_tsn_offload_apply() which
evaluates and triggers reset adapter. The double reset causes issues in
the calculation of adapter->qbv_count in igc.
TAPRIO_CMD_REPLACE command is expected to reset the adapter since it
activates qbv. It's unexpected for TAPRIO_CMD_STATS to do the same
because it doesn't configure any driver-specific TSN settings. So, the
evaluation in igc_tsn_offload_apply() isn't needed for TAPRIO_CMD_STATS.
To address this, commands parsing are relocated to
igc_tsn_enable_qbv_scheduling(). Commands that don't require an adapter
reset will exit after processing, thus avoiding igc_tsn_offload_apply().
Fixes: d3750076d464 ("igc: Add TransmissionOverrun counter")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
---
drivers/net/ethernet/intel/igc/igc_main.c | 33 ++++++++++++-----------
1 file changed, 17 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 87b655b839c1..33069880c86c 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -6310,21 +6310,6 @@ static int igc_save_qbv_schedule(struct igc_adapter *adapter,
size_t n;
int i;
- switch (qopt->cmd) {
- case TAPRIO_CMD_REPLACE:
- break;
- case TAPRIO_CMD_DESTROY:
- return igc_tsn_clear_schedule(adapter);
- case TAPRIO_CMD_STATS:
- igc_taprio_stats(adapter->netdev, &qopt->stats);
- return 0;
- case TAPRIO_CMD_QUEUE_STATS:
- igc_taprio_queue_stats(adapter->netdev, &qopt->queue_stats);
- return 0;
- default:
- return -EOPNOTSUPP;
- }
-
if (qopt->base_time < 0)
return -ERANGE;
@@ -6433,7 +6418,23 @@ static int igc_tsn_enable_qbv_scheduling(struct igc_adapter *adapter,
if (hw->mac.type != igc_i225)
return -EOPNOTSUPP;
- err = igc_save_qbv_schedule(adapter, qopt);
+ switch (qopt->cmd) {
+ case TAPRIO_CMD_REPLACE:
+ err = igc_save_qbv_schedule(adapter, qopt);
+ break;
+ case TAPRIO_CMD_DESTROY:
+ err = igc_tsn_clear_schedule(adapter);
+ break;
+ case TAPRIO_CMD_STATS:
+ igc_taprio_stats(adapter->netdev, &qopt->stats);
+ return 0;
+ case TAPRIO_CMD_QUEUE_STATS:
+ igc_taprio_queue_stats(adapter->netdev, &qopt->queue_stats);
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+
if (err)
return err;
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
To: "David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Jesse Brandeburg <jesse.brandeburg@intel.com>,
Tony Nguyen <anthony.l.nguyen@intel.com>,
Vinicius Costa Gomes <vinicius.gomes@intel.com>
Cc: intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, stable@vger.kernel.org,
Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Subject: [PATCH net 1/1] igc: Fix double reset adapter triggered from a single taprio cmd
Date: Tue, 25 Jun 2024 04:26:56 -0400 [thread overview]
Message-ID: <20240625082656.2702440-1-faizal.abdul.rahim@linux.intel.com> (raw)
Following the implementation of "igc: Add TransmissionOverrun counter"
patch, when a taprio command is triggered by user, igc processes two
commands: TAPRIO_CMD_REPLACE followed by TAPRIO_CMD_STATS. However, both
commands unconditionally pass through igc_tsn_offload_apply() which
evaluates and triggers reset adapter. The double reset causes issues in
the calculation of adapter->qbv_count in igc.
TAPRIO_CMD_REPLACE command is expected to reset the adapter since it
activates qbv. It's unexpected for TAPRIO_CMD_STATS to do the same
because it doesn't configure any driver-specific TSN settings. So, the
evaluation in igc_tsn_offload_apply() isn't needed for TAPRIO_CMD_STATS.
To address this, commands parsing are relocated to
igc_tsn_enable_qbv_scheduling(). Commands that don't require an adapter
reset will exit after processing, thus avoiding igc_tsn_offload_apply().
Fixes: d3750076d464 ("igc: Add TransmissionOverrun counter")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
---
drivers/net/ethernet/intel/igc/igc_main.c | 33 ++++++++++++-----------
1 file changed, 17 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 87b655b839c1..33069880c86c 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -6310,21 +6310,6 @@ static int igc_save_qbv_schedule(struct igc_adapter *adapter,
size_t n;
int i;
- switch (qopt->cmd) {
- case TAPRIO_CMD_REPLACE:
- break;
- case TAPRIO_CMD_DESTROY:
- return igc_tsn_clear_schedule(adapter);
- case TAPRIO_CMD_STATS:
- igc_taprio_stats(adapter->netdev, &qopt->stats);
- return 0;
- case TAPRIO_CMD_QUEUE_STATS:
- igc_taprio_queue_stats(adapter->netdev, &qopt->queue_stats);
- return 0;
- default:
- return -EOPNOTSUPP;
- }
-
if (qopt->base_time < 0)
return -ERANGE;
@@ -6433,7 +6418,23 @@ static int igc_tsn_enable_qbv_scheduling(struct igc_adapter *adapter,
if (hw->mac.type != igc_i225)
return -EOPNOTSUPP;
- err = igc_save_qbv_schedule(adapter, qopt);
+ switch (qopt->cmd) {
+ case TAPRIO_CMD_REPLACE:
+ err = igc_save_qbv_schedule(adapter, qopt);
+ break;
+ case TAPRIO_CMD_DESTROY:
+ err = igc_tsn_clear_schedule(adapter);
+ break;
+ case TAPRIO_CMD_STATS:
+ igc_taprio_stats(adapter->netdev, &qopt->stats);
+ return 0;
+ case TAPRIO_CMD_QUEUE_STATS:
+ igc_taprio_queue_stats(adapter->netdev, &qopt->queue_stats);
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+
if (err)
return err;
--
2.25.1
next reply other threads:[~2024-06-25 15:05 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-25 8:26 Faizal Rahim [this message]
2024-06-25 8:26 ` [PATCH net 1/1] igc: Fix double reset adapter triggered from a single taprio cmd Faizal Rahim
2024-06-25 13:35 ` kernel test robot
2024-06-26 1:19 ` [Intel-wired-lan] " Abdul Rahim, Faizal
2024-06-26 1:19 ` Abdul Rahim, Faizal
2024-06-27 22:46 ` [Intel-wired-lan] " Vladimir Oltean
2024-06-27 22:46 ` Vladimir Oltean
2024-06-26 22:29 ` [Intel-wired-lan] " Vinicius Costa Gomes
2024-06-26 22:29 ` Vinicius Costa Gomes
2024-07-23 7:33 ` [Intel-wired-lan] " Mor Bar-Gabay
2024-07-23 7:33 ` Mor Bar-Gabay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240625082656.2702440-1-faizal.abdul.rahim@linux.intel.com \
--to=faizal.abdul.rahim@linux.intel.com \
--cc=anthony.l.nguyen@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jesse.brandeburg@intel.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=stable@vger.kernel.org \
--cc=vinicius.gomes@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.