* [PATCH v5 1/6] dt-bindings: ROHM BD96801 PMIC regulators
2024-06-27 7:42 [PATCH v5 0/6] Support ROHM BD96801 Scalable PMIC Matti Vaittinen
@ 2024-06-27 7:42 ` Matti Vaittinen
2024-06-27 7:43 ` [PATCH v5 2/6] dt-bindings: mfd: bd96801 PMIC core Matti Vaittinen
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Matti Vaittinen @ 2024-06-27 7:42 UTC (permalink / raw)
To: Matti Vaittinen, Matti Vaittinen
Cc: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Liam Girdwood, Mark Brown, Matti Vaittinen, Wim Van Sebroeck,
Guenter Roeck, devicetree, linux-kernel, linux-watchdog
[-- Attachment #1: Type: text/plain, Size: 3349 bytes --]
ROHM BD96801 is a highly configurable automotive grade PMIC. Introduce
DT bindings for the BD96801 regulators.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Revision history:
v2 =>
- No changes
v1 => v2:
- use lowercase node names in example
- drop unneeded '|' from description
RFCv2 => v1
- Drop regulator-name pattern requirement
- do not require regulator-name
---
.../regulator/rohm,bd96801-regulator.yaml | 63 +++++++++++++++++++
1 file changed, 63 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml
new file mode 100644
index 000000000000..b3d2d7d583ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd96801-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD96801 Power Management Integrated Circuit regulators
+
+maintainers:
+ - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description:
+ This module is part of the ROHM BD96801 MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml.
+
+ The regulator controller is represented as a sub-node of the PMIC node
+ on the device tree.
+
+ Regulator nodes should be named to buck_<number> and ldo_<number>.
+ The valid names for BD96801 regulator nodes are
+ buck1, buck2, buck3, buck4, ldo5, ldo6, ldo7
+
+patternProperties:
+ "^ldo[5-7]$":
+ type: object
+ description:
+ Properties for single LDO regulator.
+ $ref: regulator.yaml#
+
+ properties:
+ rohm,initial-voltage-microvolt:
+ description:
+ Initial voltage for regulator. Voltage can be tuned +/-150 mV from
+ this value. NOTE, This can be modified via I2C only when PMIC is in
+ STBY state.
+ minimum: 300000
+ maximum: 3300000
+
+ unevaluatedProperties: false
+
+ "^buck[1-4]$":
+ type: object
+ description:
+ Properties for single BUCK regulator.
+ $ref: regulator.yaml#
+
+ properties:
+ rohm,initial-voltage-microvolt:
+ description:
+ Initial voltage for regulator. Voltage can be tuned +/-150 mV from
+ this value. NOTE, This can be modified via I2C only when PMIC is in
+ STBY state.
+ minimum: 500000
+ maximum: 3300000
+
+ rohm,keep-on-stby:
+ description:
+ Keep the regulator powered when PMIC transitions to STBY state.
+ type: boolean
+
+ unevaluatedProperties: false
+
+additionalProperties: false
--
2.45.1
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v5 2/6] dt-bindings: mfd: bd96801 PMIC core
2024-06-27 7:42 [PATCH v5 0/6] Support ROHM BD96801 Scalable PMIC Matti Vaittinen
2024-06-27 7:42 ` [PATCH v5 1/6] dt-bindings: ROHM BD96801 PMIC regulators Matti Vaittinen
@ 2024-06-27 7:43 ` Matti Vaittinen
2024-06-27 7:43 ` [PATCH v5 3/6] mfd: support ROHM BD96801 " Matti Vaittinen
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Matti Vaittinen @ 2024-06-27 7:43 UTC (permalink / raw)
To: Matti Vaittinen, Matti Vaittinen
Cc: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Liam Girdwood, Mark Brown, Matti Vaittinen, Wim Van Sebroeck,
Guenter Roeck, devicetree, linux-kernel, linux-watchdog
[-- Attachment #1: Type: text/plain, Size: 7904 bytes --]
ROHM BD96801 is a highly configurable automotive grade PMIC. Introduce
DT bindings for the BD96801 core.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
---
Revision history:
v2 =>:
- No changes
v1 => v2:
- use lowercase node names in example
- minor addition to ERRB use-cases
RFCv2 => v1
- minor cleaning
- add timeout-sec
RFCv1 => RFCv2:
- Document rohm,hw-timeout-ms
- Document rohm,wdg-action
---
.../bindings/mfd/rohm,bd96801-pmic.yaml | 173 ++++++++++++++++++
1 file changed, 173 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml
new file mode 100644
index 000000000000..d381125a0a15
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd96801-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD96801 Scalable Power Management Integrated Circuit
+
+maintainers:
+ - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description:
+ BD96801 is an automotive grade single-chip power management IC.
+ It integrates 4 buck converters and 3 LDOs with safety features like
+ over-/under voltage and over current detection and a watchdog.
+
+properties:
+ compatible:
+ const: rohm,bd96801
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ The PMIC provides intb and errb IRQ lines. The errb IRQ line is used
+ for fatal IRQs which will cause the PMIC to shut down power outputs.
+ In many systems this will shut down the SoC contolling the PMIC and
+ connecting/handling the errb can be omitted. However, there are cases
+ where the SoC is not powered by the PMIC or has a short time backup
+ energy to handle shutdown of critical hardware. In that case it may be
+ useful to connect the errb and handle errb events.
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - enum: [intb, errb]
+ - const: errb
+
+ rohm,hw-timeout-ms:
+ description:
+ Watchdog timeout value(s). First walue is timeout limit. Second value is
+ optional value for 'too early' watchdog ping if window timeout mode is
+ to be used.
+ minItems: 1
+ maxItems: 2
+
+ rohm,wdg-action:
+ description:
+ Whether the watchdog failure must turn off the regulator power outputs or
+ just toggle the INTB line.
+ enum:
+ - prstb
+ - intb-only
+
+ timeout-sec:
+ maxItems: 2
+
+ regulators:
+ $ref: /schemas/regulator/rohm,bd96801-regulator.yaml
+ description:
+ List of child nodes that specify the regulators.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/leds/common.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic: pmic@60 {
+ reg = <0x60>;
+ compatible = "rohm,bd96801";
+ interrupt-parent = <&gpio1>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>, <6 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "intb", "errb";
+
+ regulators {
+ buck1 {
+ regulator-name = "buck1";
+ regulator-ramp-delay = <1250>;
+ /* 0.5V min INITIAL - 150 mV tune */
+ regulator-min-microvolt = <350000>;
+ /* 3.3V + 150mV tune */
+ regulator-max-microvolt = <3450000>;
+
+ /* These can be set only when PMIC is in STBY */
+ rohm,initial-voltage-microvolt = <500000>;
+ regulator-ov-error-microvolt = <230000>;
+ regulator-uv-error-microvolt = <230000>;
+ regulator-temp-protection-kelvin = <1>;
+ regulator-temp-warn-kelvin = <0>;
+ };
+ buck2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <350000>;
+ regulator-max-microvolt = <3450000>;
+
+ rohm,initial-voltage-microvolt = <3000000>;
+ regulator-ov-error-microvolt = <18000>;
+ regulator-uv-error-microvolt = <18000>;
+ regulator-temp-protection-kelvin = <1>;
+ regulator-temp-warn-kelvin = <1>;
+ };
+ buck3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <350000>;
+ regulator-max-microvolt = <3450000>;
+
+ rohm,initial-voltage-microvolt = <600000>;
+ regulator-ov-warn-microvolt = <18000>;
+ regulator-uv-warn-microvolt = <18000>;
+ regulator-temp-protection-kelvin = <1>;
+ regulator-temp-error-kelvin = <0>;
+ };
+ buck4 {
+ regulator-name = "buck4";
+ regulator-min-microvolt = <350000>;
+ regulator-max-microvolt = <3450000>;
+
+ rohm,initial-voltage-microvolt = <600000>;
+ regulator-ov-warn-microvolt = <18000>;
+ regulator-uv-warn-microvolt = <18000>;
+ regulator-temp-protection-kelvin = <1>;
+ regulator-temp-error-kelvin = <0>;
+ };
+ ldo5 {
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+
+ rohm,initial-voltage-microvolt = <500000>;
+ regulator-ov-error-microvolt = <36000>;
+ regulator-uv-error-microvolt = <34000>;
+ regulator-temp-protection-kelvin = <1>;
+ regulator-temp-warn-kelvin = <0>;
+ };
+ ldo6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+
+ rohm,initial-voltage-microvolt = <300000>;
+ regulator-ov-error-microvolt = <36000>;
+ regulator-uv-error-microvolt = <34000>;
+ regulator-temp-protection-kelvin = <1>;
+ regulator-temp-warn-kelvin = <0>;
+ };
+ ldo7 {
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <3300000>;
+
+ rohm,initial-voltage-microvolt = <500000>;
+ regulator-ov-error-microvolt = <36000>;
+ regulator-uv-error-microvolt = <34000>;
+ regulator-temp-protection-kelvin = <1>;
+ regulator-temp-warn-kelvin = <0>;
+ };
+ };
+ };
+ };
--
2.45.1
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v5 3/6] mfd: support ROHM BD96801 PMIC core
2024-06-27 7:42 [PATCH v5 0/6] Support ROHM BD96801 Scalable PMIC Matti Vaittinen
2024-06-27 7:42 ` [PATCH v5 1/6] dt-bindings: ROHM BD96801 PMIC regulators Matti Vaittinen
2024-06-27 7:43 ` [PATCH v5 2/6] dt-bindings: mfd: bd96801 PMIC core Matti Vaittinen
@ 2024-06-27 7:43 ` Matti Vaittinen
2024-06-27 7:43 ` [PATCH v5 4/6] regulator: bd96801: ROHM BD96801 PMIC regulators Matti Vaittinen
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Matti Vaittinen @ 2024-06-27 7:43 UTC (permalink / raw)
To: Matti Vaittinen, Matti Vaittinen
Cc: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Liam Girdwood, Mark Brown, Matti Vaittinen, Wim Van Sebroeck,
Guenter Roeck, devicetree, linux-kernel, linux-watchdog
[-- Attachment #1: Type: text/plain, Size: 21996 bytes --]
The ROHM BD96801 PMIC is highly customizable automotive grade PMIC
which integrates regulator and watchdog funtionalities.
Provide INTB IRQ and register accesses for regulator/watchdog drivers.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
---
Changelog:
v4 =>:
- No changes
v3 => v4:
- change regulator cell name
- minor styling
v2 =>:
- No changes
v1 => v2:
- Drop unused enum
- Improve error prints
- improve comments
RFCv2 => v1:
- drop ERRB interrupts (for now)
- bd96801: Unlock registers in core driver
Changelog: RFCv1 => RFCv2
- Work-around the IRQ domain name conflict
- Add watchdog IRQ
- Various styling fixes based on review by Lee
---
drivers/mfd/Kconfig | 13 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/rohm-bd96801.c | 273 +++++++++++++++++++++++++++++++
include/linux/mfd/rohm-bd96801.h | 215 ++++++++++++++++++++++++
include/linux/mfd/rohm-generic.h | 1 +
5 files changed, 503 insertions(+)
create mode 100644 drivers/mfd/rohm-bd96801.c
create mode 100644 include/linux/mfd/rohm-bd96801.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 266b4f54af60..68cc7af9ef97 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2089,6 +2089,19 @@ config MFD_ROHM_BD957XMUF
BD9573MUF Power Management ICs. BD9576 and BD9573 are primarily
designed to be used to power R-Car series processors.
+config MFD_ROHM_BD96801
+ tristate "ROHM BD96801 Power Management IC"
+ depends on I2C=y
+ depends on OF
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ select MFD_CORE
+ help
+ Select this option to get support for the ROHM BD96801 Power
+ Management IC. The ROHM BD96801 is a highly scalable Power Management
+ IC for industrial and automotive use. The BD96801 can be used as a
+ master PMIC in a chained PMIC solution with suitable companion PMICs.
+
config MFD_STM32_LPTIMER
tristate "Support for STM32 Low-Power Timer"
depends on (ARCH_STM32 && OF) || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c66f07edcd0e..e792892d4a8b 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -264,6 +264,7 @@ obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o
obj-$(CONFIG_MFD_ROHM_BD71828) += rohm-bd71828.o
obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
obj-$(CONFIG_MFD_ROHM_BD957XMUF) += rohm-bd9576.o
+obj-$(CONFIG_MFD_ROHM_BD96801) += rohm-bd96801.o
obj-$(CONFIG_MFD_STMFX) += stmfx.o
obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o
diff --git a/drivers/mfd/rohm-bd96801.c b/drivers/mfd/rohm-bd96801.c
new file mode 100644
index 000000000000..714f08ed544b
--- /dev/null
+++ b/drivers/mfd/rohm-bd96801.c
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2024 ROHM Semiconductors
+ *
+ * ROHM BD96801 PMIC driver
+ *
+ * This version of the "BD86801 scalable PMIC"'s driver supports only very
+ * basic set of the PMIC features. Most notably, there is no support for
+ * the ERRB interrupt and the configurations which should be done when the
+ * PMIC is in STBY mode.
+ *
+ * Supporting the ERRB interrupt would require dropping the regmap-IRQ
+ * usage or working around (or accepting a presense of) a naming conflict
+ * in debugFS IRQs.
+ *
+ * Being able to reliably do the configurations like changing the
+ * regulator safety limits (like limits for the over/under -voltages, over
+ * current, thermal protection) would require the configuring driver to be
+ * synchronized with entity causing the PMIC state transitions. Eg, one
+ * should be able to ensure the PMIC is in STBY state when the
+ * configurations are applied to the hardware. How and when the PMIC state
+ * transitions are to be done is likely to be very system specific, as will
+ * be the need to configure these safety limits. Hence it's not simple to
+ * come up with a generic solution.
+ *
+ * Users who require the ERRB handling and STBY state configurations can
+ * have a look at the original RFC:
+ * https://lore.kernel.org/all/cover.1712920132.git.mazziesaccount@gmail.com/
+ * which implements a workaround to debugFS naming conflict and some of
+ * the safety limit configurations - but leaves the state change handling
+ * and synchronization to be implemented.
+ *
+ * It would be great to hear (and receive a patch!) if you implement the
+ * STBY configuration support or a proper fix to the debugFS naming
+ * conflict in your downstream driver ;)
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#include <linux/mfd/rohm-bd96801.h>
+#include <linux/mfd/rohm-generic.h>
+
+static const struct resource regulator_intb_irqs[] = {
+ DEFINE_RES_IRQ_NAMED(BD96801_TW_STAT, "bd96801-core-thermal"),
+
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OCPH_STAT, "bd96801-buck1-overcurr-h"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OCPL_STAT, "bd96801-buck1-overcurr-l"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OCPN_STAT, "bd96801-buck1-overcurr-n"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OVD_STAT, "bd96801-buck1-overvolt"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_UVD_STAT, "bd96801-buck1-undervolt"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_TW_CH_STAT, "bd96801-buck1-thermal"),
+
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OCPH_STAT, "bd96801-buck2-overcurr-h"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OCPL_STAT, "bd96801-buck2-overcurr-l"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OCPN_STAT, "bd96801-buck2-overcurr-n"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OVD_STAT, "bd96801-buck2-overvolt"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_UVD_STAT, "bd96801-buck2-undervolt"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_TW_CH_STAT, "bd96801-buck2-thermal"),
+
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OCPH_STAT, "bd96801-buck3-overcurr-h"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OCPL_STAT, "bd96801-buck3-overcurr-l"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OCPN_STAT, "bd96801-buck3-overcurr-n"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OVD_STAT, "bd96801-buck3-overvolt"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_UVD_STAT, "bd96801-buck3-undervolt"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_TW_CH_STAT, "bd96801-buck3-thermal"),
+
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OCPH_STAT, "bd96801-buck4-overcurr-h"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OCPL_STAT, "bd96801-buck4-overcurr-l"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OCPN_STAT, "bd96801-buck4-overcurr-n"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OVD_STAT, "bd96801-buck4-overvolt"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_UVD_STAT, "bd96801-buck4-undervolt"),
+ DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_TW_CH_STAT, "bd96801-buck4-thermal"),
+
+ DEFINE_RES_IRQ_NAMED(BD96801_LDO5_OCPH_STAT, "bd96801-ldo5-overcurr"),
+ DEFINE_RES_IRQ_NAMED(BD96801_LDO5_OVD_STAT, "bd96801-ldo5-overvolt"),
+ DEFINE_RES_IRQ_NAMED(BD96801_LDO5_UVD_STAT, "bd96801-ldo5-undervolt"),
+
+ DEFINE_RES_IRQ_NAMED(BD96801_LDO6_OCPH_STAT, "bd96801-ldo6-overcurr"),
+ DEFINE_RES_IRQ_NAMED(BD96801_LDO6_OVD_STAT, "bd96801-ldo6-overvolt"),
+ DEFINE_RES_IRQ_NAMED(BD96801_LDO6_UVD_STAT, "bd96801-ldo6-undervolt"),
+
+ DEFINE_RES_IRQ_NAMED(BD96801_LDO7_OCPH_STAT, "bd96801-ldo7-overcurr"),
+ DEFINE_RES_IRQ_NAMED(BD96801_LDO7_OVD_STAT, "bd96801-ldo7-overvolt"),
+ DEFINE_RES_IRQ_NAMED(BD96801_LDO7_UVD_STAT, "bd96801-ldo7-undervolt"),
+};
+
+static const struct resource wdg_intb_irqs[] = {
+ DEFINE_RES_IRQ_NAMED(BD96801_WDT_ERR_STAT, "bd96801-wdg"),
+};
+
+static struct mfd_cell bd96801_cells[] = {
+ {
+ .name = "bd96801-wdt",
+ .resources = wdg_intb_irqs,
+ .num_resources = ARRAY_SIZE(wdg_intb_irqs),
+ }, {
+ .name = "bd96801-regulator",
+ .resources = regulator_intb_irqs,
+ .num_resources = ARRAY_SIZE(regulator_intb_irqs),
+ },
+};
+
+static const struct regmap_range bd96801_volatile_ranges[] = {
+ /* Status registers */
+ regmap_reg_range(BD96801_REG_WD_FEED, BD96801_REG_WD_FAILCOUNT),
+ regmap_reg_range(BD96801_REG_WD_ASK, BD96801_REG_WD_ASK),
+ regmap_reg_range(BD96801_REG_WD_STATUS, BD96801_REG_WD_STATUS),
+ regmap_reg_range(BD96801_REG_PMIC_STATE, BD96801_REG_INT_LDO7_INTB),
+ /* Registers which do not update value unless PMIC is in STBY */
+ regmap_reg_range(BD96801_REG_SSCG_CTRL, BD96801_REG_SHD_INTB),
+ regmap_reg_range(BD96801_REG_BUCK_OVP, BD96801_REG_BOOT_OVERTIME),
+ /*
+ * LDO control registers have single bit (LDO MODE) which does not
+ * change when we write it unless PMIC is in STBY. It's safer to not
+ * cache it.
+ */
+ regmap_reg_range(BD96801_LDO5_VOL_LVL_REG, BD96801_LDO7_VOL_LVL_REG),
+};
+
+static const struct regmap_access_table volatile_regs = {
+ .yes_ranges = bd96801_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(bd96801_volatile_ranges),
+};
+
+static const struct regmap_irq bd96801_intb_irqs[] = {
+ /* STATUS SYSTEM INTB */
+ REGMAP_IRQ_REG(BD96801_TW_STAT, 0, BD96801_TW_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_WDT_ERR_STAT, 0, BD96801_WDT_ERR_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_I2C_ERR_STAT, 0, BD96801_I2C_ERR_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_CHIP_IF_ERR_STAT, 0, BD96801_CHIP_IF_ERR_STAT_MASK),
+ /* STATUS BUCK1 INTB */
+ REGMAP_IRQ_REG(BD96801_BUCK1_OCPH_STAT, 1, BD96801_BUCK_OCPH_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK1_OCPL_STAT, 1, BD96801_BUCK_OCPL_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK1_OCPN_STAT, 1, BD96801_BUCK_OCPN_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK1_OVD_STAT, 1, BD96801_BUCK_OVD_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK1_UVD_STAT, 1, BD96801_BUCK_UVD_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK1_TW_CH_STAT, 1, BD96801_BUCK_TW_CH_STAT_MASK),
+ /* BUCK 2 INTB */
+ REGMAP_IRQ_REG(BD96801_BUCK2_OCPH_STAT, 2, BD96801_BUCK_OCPH_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK2_OCPL_STAT, 2, BD96801_BUCK_OCPL_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK2_OCPN_STAT, 2, BD96801_BUCK_OCPN_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK2_OVD_STAT, 2, BD96801_BUCK_OVD_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK2_UVD_STAT, 2, BD96801_BUCK_UVD_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK2_TW_CH_STAT, 2, BD96801_BUCK_TW_CH_STAT_MASK),
+ /* BUCK 3 INTB */
+ REGMAP_IRQ_REG(BD96801_BUCK3_OCPH_STAT, 3, BD96801_BUCK_OCPH_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK3_OCPL_STAT, 3, BD96801_BUCK_OCPL_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK3_OCPN_STAT, 3, BD96801_BUCK_OCPN_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK3_OVD_STAT, 3, BD96801_BUCK_OVD_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK3_UVD_STAT, 3, BD96801_BUCK_UVD_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK3_TW_CH_STAT, 3, BD96801_BUCK_TW_CH_STAT_MASK),
+ /* BUCK 4 INTB */
+ REGMAP_IRQ_REG(BD96801_BUCK4_OCPH_STAT, 4, BD96801_BUCK_OCPH_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK4_OCPL_STAT, 4, BD96801_BUCK_OCPL_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK4_OCPN_STAT, 4, BD96801_BUCK_OCPN_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK4_OVD_STAT, 4, BD96801_BUCK_OVD_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK4_UVD_STAT, 4, BD96801_BUCK_UVD_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_BUCK4_TW_CH_STAT, 4, BD96801_BUCK_TW_CH_STAT_MASK),
+ /* LDO5 INTB */
+ REGMAP_IRQ_REG(BD96801_LDO5_OCPH_STAT, 5, BD96801_LDO_OCPH_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_LDO5_OVD_STAT, 5, BD96801_LDO_OVD_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_LDO5_UVD_STAT, 5, BD96801_LDO_UVD_STAT_MASK),
+ /* LDO6 INTB */
+ REGMAP_IRQ_REG(BD96801_LDO6_OCPH_STAT, 6, BD96801_LDO_OCPH_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_LDO6_OVD_STAT, 6, BD96801_LDO_OVD_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_LDO6_UVD_STAT, 6, BD96801_LDO_UVD_STAT_MASK),
+ /* LDO7 INTB */
+ REGMAP_IRQ_REG(BD96801_LDO7_OCPH_STAT, 7, BD96801_LDO_OCPH_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_LDO7_OVD_STAT, 7, BD96801_LDO_OVD_STAT_MASK),
+ REGMAP_IRQ_REG(BD96801_LDO7_UVD_STAT, 7, BD96801_LDO_UVD_STAT_MASK),
+};
+
+static struct regmap_irq_chip bd96801_irq_chip_intb = {
+ .name = "bd96801-irq-intb",
+ .main_status = BD96801_REG_INT_MAIN,
+ .num_main_regs = 1,
+ .irqs = &bd96801_intb_irqs[0],
+ .num_irqs = ARRAY_SIZE(bd96801_intb_irqs),
+ .status_base = BD96801_REG_INT_SYS_INTB,
+ .mask_base = BD96801_REG_MASK_SYS_INTB,
+ .ack_base = BD96801_REG_INT_SYS_INTB,
+ .init_ack_masked = true,
+ .num_regs = 8,
+ .irq_reg_stride = 1,
+};
+
+static const struct regmap_config bd96801_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .volatile_table = &volatile_regs,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int bd96801_i2c_probe(struct i2c_client *i2c)
+{
+ struct regmap_irq_chip_data *intb_irq_data;
+ const struct fwnode_handle *fwnode;
+ struct irq_domain *intb_domain;
+ struct regmap *regmap;
+ int ret, intb_irq;
+
+ fwnode = dev_fwnode(&i2c->dev);
+ if (!fwnode)
+ return dev_err_probe(&i2c->dev, -EINVAL, "Failed to find fwnode\n");
+
+ intb_irq = fwnode_irq_get_byname(fwnode, "intb");
+ if (intb_irq < 0)
+ return dev_err_probe(&i2c->dev, intb_irq, "INTB IRQ not configured\n");
+
+ regmap = devm_regmap_init_i2c(i2c, &bd96801_regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(&i2c->dev, PTR_ERR(regmap),
+ "Regmap initialization failed\n");
+
+ ret = regmap_write(regmap, BD96801_LOCK_REG, BD96801_UNLOCK);
+ if (ret)
+ return dev_err_probe(&i2c->dev, ret, "Failed to unlock PMIC\n");
+
+ ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, intb_irq,
+ IRQF_ONESHOT, 0, &bd96801_irq_chip_intb,
+ &intb_irq_data);
+ if (ret)
+ return dev_err_probe(&i2c->dev, ret, "Failed to add INTB IRQ chip\n");
+
+ intb_domain = regmap_irq_get_domain(intb_irq_data);
+
+ ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
+ bd96801_cells,
+ ARRAY_SIZE(bd96801_cells), NULL, 0,
+ intb_domain);
+ if (ret)
+ dev_err(&i2c->dev, "Failed to create subdevices\n");
+
+ return ret;
+}
+
+static const struct of_device_id bd96801_of_match[] = {
+ { .compatible = "rohm,bd96801", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, bd96801_of_match);
+
+static struct i2c_driver bd96801_i2c_driver = {
+ .driver = {
+ .name = "rohm-bd96801",
+ .of_match_table = bd96801_of_match,
+ },
+ .probe = bd96801_i2c_probe,
+};
+
+static int __init bd96801_i2c_init(void)
+{
+ return i2c_add_driver(&bd96801_i2c_driver);
+}
+
+/* Initialise early so consumer devices can complete system boot */
+subsys_initcall(bd96801_i2c_init);
+
+static void __exit bd96801_i2c_exit(void)
+{
+ i2c_del_driver(&bd96801_i2c_driver);
+}
+module_exit(bd96801_i2c_exit);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("ROHM BD96801 Power Management IC driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/rohm-bd96801.h b/include/linux/mfd/rohm-bd96801.h
new file mode 100644
index 000000000000..e2d9e10b6364
--- /dev/null
+++ b/include/linux/mfd/rohm-bd96801.h
@@ -0,0 +1,215 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* Copyright (C) 2024 ROHM Semiconductors */
+
+#ifndef __MFD_BD96801_H__
+#define __MFD_BD96801_H__
+
+#define BD96801_REG_SSCG_CTRL 0x09
+#define BD96801_REG_SHD_INTB 0x20
+#define BD96801_LDO5_VOL_LVL_REG 0x2c
+#define BD96801_LDO6_VOL_LVL_REG 0x2d
+#define BD96801_LDO7_VOL_LVL_REG 0x2e
+#define BD96801_REG_BUCK_OVP 0x30
+#define BD96801_REG_BUCK_OVD 0x35
+#define BD96801_REG_LDO_OVP 0x31
+#define BD96801_REG_LDO_OVD 0x36
+#define BD96801_REG_BOOT_OVERTIME 0x3a
+#define BD96801_REG_WD_TMO 0x40
+#define BD96801_REG_WD_CONF 0x41
+#define BD96801_REG_WD_FEED 0x42
+#define BD96801_REG_WD_FAILCOUNT 0x43
+#define BD96801_REG_WD_ASK 0x46
+#define BD96801_REG_WD_STATUS 0x4a
+#define BD96801_REG_PMIC_STATE 0x4f
+#define BD96801_REG_EXT_STATE 0x50
+
+#define BD96801_STATE_STBY 0x09
+
+#define BD96801_LOCK_REG 0x04
+#define BD96801_UNLOCK 0x9d
+#define BD96801_LOCK 0x00
+
+/* IRQ register area */
+#define BD96801_REG_INT_MAIN 0x51
+
+/*
+ * The BD96801 has two physical IRQ lines, INTB and ERRB.
+ *
+ * The 'main status register' is located at 0x51.
+ * The ERRB status registers are located at 0x52 ... 0x5B
+ * INTB status registers are at range 0x5c ... 0x63
+ */
+#define BD96801_REG_INT_SYS_ERRB1 0x52
+#define BD96801_REG_INT_SYS_INTB 0x5c
+#define BD96801_REG_INT_LDO7_INTB 0x63
+
+/* MASK registers */
+#define BD96801_REG_MASK_SYS_INTB 0x73
+#define BD96801_REG_MASK_SYS_ERRB 0x69
+
+#define BD96801_MAX_REGISTER 0x7a
+
+#define BD96801_OTP_ERR_MASK BIT(0)
+#define BD96801_DBIST_ERR_MASK BIT(1)
+#define BD96801_EEP_ERR_MASK BIT(2)
+#define BD96801_ABIST_ERR_MASK BIT(3)
+#define BD96801_PRSTB_ERR_MASK BIT(4)
+#define BD96801_DRMOS1_ERR_MASK BIT(5)
+#define BD96801_DRMOS2_ERR_MASK BIT(6)
+#define BD96801_SLAVE_ERR_MASK BIT(7)
+#define BD96801_VREF_ERR_MASK BIT(0)
+#define BD96801_TSD_ERR_MASK BIT(1)
+#define BD96801_UVLO_ERR_MASK BIT(2)
+#define BD96801_OVLO_ERR_MASK BIT(3)
+#define BD96801_OSC_ERR_MASK BIT(4)
+#define BD96801_PON_ERR_MASK BIT(5)
+#define BD96801_POFF_ERR_MASK BIT(6)
+#define BD96801_CMD_SHDN_ERR_MASK BIT(7)
+#define BD96801_INT_PRSTB_WDT_ERR_MASK BIT(0)
+#define BD96801_INT_CHIP_IF_ERR_MASK BIT(3)
+#define BD96801_INT_SHDN_ERR_MASK BIT(7)
+#define BD96801_OUT_PVIN_ERR_MASK BIT(0)
+#define BD96801_OUT_OVP_ERR_MASK BIT(1)
+#define BD96801_OUT_UVP_ERR_MASK BIT(2)
+#define BD96801_OUT_SHDN_ERR_MASK BIT(7)
+
+/* ERRB IRQs */
+enum {
+ /* Reg 0x52, 0x53, 0x54 - ERRB system IRQs */
+ BD96801_OTP_ERR_STAT,
+ BD96801_DBIST_ERR_STAT,
+ BD96801_EEP_ERR_STAT,
+ BD96801_ABIST_ERR_STAT,
+ BD96801_PRSTB_ERR_STAT,
+ BD96801_DRMOS1_ERR_STAT,
+ BD96801_DRMOS2_ERR_STAT,
+ BD96801_SLAVE_ERR_STAT,
+ BD96801_VREF_ERR_STAT,
+ BD96801_TSD_ERR_STAT,
+ BD96801_UVLO_ERR_STAT,
+ BD96801_OVLO_ERR_STAT,
+ BD96801_OSC_ERR_STAT,
+ BD96801_PON_ERR_STAT,
+ BD96801_POFF_ERR_STAT,
+ BD96801_CMD_SHDN_ERR_STAT,
+ BD96801_INT_PRSTB_WDT_ERR,
+ BD96801_INT_CHIP_IF_ERR,
+ BD96801_INT_SHDN_ERR_STAT,
+
+ /* Reg 0x55 BUCK1 ERR IRQs */
+ BD96801_BUCK1_PVIN_ERR_STAT,
+ BD96801_BUCK1_OVP_ERR_STAT,
+ BD96801_BUCK1_UVP_ERR_STAT,
+ BD96801_BUCK1_SHDN_ERR_STAT,
+
+ /* Reg 0x56 BUCK2 ERR IRQs */
+ BD96801_BUCK2_PVIN_ERR_STAT,
+ BD96801_BUCK2_OVP_ERR_STAT,
+ BD96801_BUCK2_UVP_ERR_STAT,
+ BD96801_BUCK2_SHDN_ERR_STAT,
+
+ /* Reg 0x57 BUCK3 ERR IRQs */
+ BD96801_BUCK3_PVIN_ERR_STAT,
+ BD96801_BUCK3_OVP_ERR_STAT,
+ BD96801_BUCK3_UVP_ERR_STAT,
+ BD96801_BUCK3_SHDN_ERR_STAT,
+
+ /* Reg 0x58 BUCK4 ERR IRQs */
+ BD96801_BUCK4_PVIN_ERR_STAT,
+ BD96801_BUCK4_OVP_ERR_STAT,
+ BD96801_BUCK4_UVP_ERR_STAT,
+ BD96801_BUCK4_SHDN_ERR_STAT,
+
+ /* Reg 0x59 LDO5 ERR IRQs */
+ BD96801_LDO5_PVIN_ERR_STAT,
+ BD96801_LDO5_OVP_ERR_STAT,
+ BD96801_LDO5_UVP_ERR_STAT,
+ BD96801_LDO5_SHDN_ERR_STAT,
+
+ /* Reg 0x5a LDO6 ERR IRQs */
+ BD96801_LDO6_PVIN_ERR_STAT,
+ BD96801_LDO6_OVP_ERR_STAT,
+ BD96801_LDO6_UVP_ERR_STAT,
+ BD96801_LDO6_SHDN_ERR_STAT,
+
+ /* Reg 0x5b LDO7 ERR IRQs */
+ BD96801_LDO7_PVIN_ERR_STAT,
+ BD96801_LDO7_OVP_ERR_STAT,
+ BD96801_LDO7_UVP_ERR_STAT,
+ BD96801_LDO7_SHDN_ERR_STAT,
+};
+
+/* INTB IRQs */
+enum {
+ /* Reg 0x5c (System INTB) */
+ BD96801_TW_STAT,
+ BD96801_WDT_ERR_STAT,
+ BD96801_I2C_ERR_STAT,
+ BD96801_CHIP_IF_ERR_STAT,
+
+ /* Reg 0x5d (BUCK1 INTB) */
+ BD96801_BUCK1_OCPH_STAT,
+ BD96801_BUCK1_OCPL_STAT,
+ BD96801_BUCK1_OCPN_STAT,
+ BD96801_BUCK1_OVD_STAT,
+ BD96801_BUCK1_UVD_STAT,
+ BD96801_BUCK1_TW_CH_STAT,
+
+ /* Reg 0x5e (BUCK2 INTB) */
+ BD96801_BUCK2_OCPH_STAT,
+ BD96801_BUCK2_OCPL_STAT,
+ BD96801_BUCK2_OCPN_STAT,
+ BD96801_BUCK2_OVD_STAT,
+ BD96801_BUCK2_UVD_STAT,
+ BD96801_BUCK2_TW_CH_STAT,
+
+ /* Reg 0x5f (BUCK3 INTB)*/
+ BD96801_BUCK3_OCPH_STAT,
+ BD96801_BUCK3_OCPL_STAT,
+ BD96801_BUCK3_OCPN_STAT,
+ BD96801_BUCK3_OVD_STAT,
+ BD96801_BUCK3_UVD_STAT,
+ BD96801_BUCK3_TW_CH_STAT,
+
+ /* Reg 0x60 (BUCK4 INTB)*/
+ BD96801_BUCK4_OCPH_STAT,
+ BD96801_BUCK4_OCPL_STAT,
+ BD96801_BUCK4_OCPN_STAT,
+ BD96801_BUCK4_OVD_STAT,
+ BD96801_BUCK4_UVD_STAT,
+ BD96801_BUCK4_TW_CH_STAT,
+
+ /* Reg 0x61 (LDO5 INTB) */
+ BD96801_LDO5_OCPH_STAT, /* bit [0] */
+ BD96801_LDO5_OVD_STAT, /* bit [3] */
+ BD96801_LDO5_UVD_STAT, /* bit [4] */
+
+ /* Reg 0x62 (LDO6 INTB) */
+ BD96801_LDO6_OCPH_STAT, /* bit [0] */
+ BD96801_LDO6_OVD_STAT, /* bit [3] */
+ BD96801_LDO6_UVD_STAT, /* bit [4] */
+
+ /* Reg 0x63 (LDO7 INTB) */
+ BD96801_LDO7_OCPH_STAT, /* bit [0] */
+ BD96801_LDO7_OVD_STAT, /* bit [3] */
+ BD96801_LDO7_UVD_STAT, /* bit [4] */
+};
+
+/* IRQ MASKs */
+#define BD96801_TW_STAT_MASK BIT(0)
+#define BD96801_WDT_ERR_STAT_MASK BIT(1)
+#define BD96801_I2C_ERR_STAT_MASK BIT(2)
+#define BD96801_CHIP_IF_ERR_STAT_MASK BIT(3)
+
+#define BD96801_BUCK_OCPH_STAT_MASK BIT(0)
+#define BD96801_BUCK_OCPL_STAT_MASK BIT(1)
+#define BD96801_BUCK_OCPN_STAT_MASK BIT(2)
+#define BD96801_BUCK_OVD_STAT_MASK BIT(3)
+#define BD96801_BUCK_UVD_STAT_MASK BIT(4)
+#define BD96801_BUCK_TW_CH_STAT_MASK BIT(5)
+
+#define BD96801_LDO_OCPH_STAT_MASK BIT(0)
+#define BD96801_LDO_OVD_STAT_MASK BIT(3)
+#define BD96801_LDO_UVD_STAT_MASK BIT(4)
+
+#endif
diff --git a/include/linux/mfd/rohm-generic.h b/include/linux/mfd/rohm-generic.h
index 4eeb22876bad..e7d4e6afe388 100644
--- a/include/linux/mfd/rohm-generic.h
+++ b/include/linux/mfd/rohm-generic.h
@@ -16,6 +16,7 @@ enum rohm_chip_type {
ROHM_CHIP_TYPE_BD71828,
ROHM_CHIP_TYPE_BD71837,
ROHM_CHIP_TYPE_BD71847,
+ ROHM_CHIP_TYPE_BD96801,
ROHM_CHIP_TYPE_AMOUNT
};
--
2.45.1
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v5 4/6] regulator: bd96801: ROHM BD96801 PMIC regulators
2024-06-27 7:42 [PATCH v5 0/6] Support ROHM BD96801 Scalable PMIC Matti Vaittinen
` (2 preceding siblings ...)
2024-06-27 7:43 ` [PATCH v5 3/6] mfd: support ROHM BD96801 " Matti Vaittinen
@ 2024-06-27 7:43 ` Matti Vaittinen
2024-06-27 7:43 ` [PATCH v5 5/6] watchdog: ROHM BD96801 PMIC WDG driver Matti Vaittinen
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Matti Vaittinen @ 2024-06-27 7:43 UTC (permalink / raw)
To: Matti Vaittinen, Matti Vaittinen
Cc: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Liam Girdwood, Mark Brown, Matti Vaittinen, Wim Van Sebroeck,
Guenter Roeck, devicetree, linux-kernel, linux-watchdog
[-- Attachment #1: Type: text/plain, Size: 33227 bytes --]
The ROHM BD96801 "Scalable PMIC" is an automotive grade PMIC which can
scale to different applications by allowing chaining of PMICs. The PMIC
also supports various protection features which can be configured either
to fire IRQs - or to shut down power outputs when failure is detected.
The driver implements basic voltage control and sending error
notifications.
NOTE:
The driver does not support doing configuration which require the PMIC
to be in STBY state. The omitted feature set includes setting safety
limit values, changing LDO voltages and controlling enable state for
some regulators.
Also, the ERRB IRQ is not handled.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
---
Revision history:
v4 => v5:
- drop unintended Makefile change
v3 => v4:
- changed device ID to bd96801-regulator as was requested by Lee during
the MFD driver review.
v2 => v3:
- no changes
v1 => v2:
- regulator: bd96801: lowercase DT node names
- split intb registration to own function
RFCv2 => v1:
- Drop STBY mode configurations
- Drop ERRB IRQs
- drop PMIC register unlock (moved to MFD to prevent races)
RFCv1 => RFCv2:
- Use devm_kcalloc() instead of devm_kzalloc() where appropriate
- Use devm_kmemdup()
- Add MODULE_DEVICE_TABLE
- drop MODULE_ALIAS
---
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/bd96801-regulator.c | 908 ++++++++++++++++++++++++++
3 files changed, 921 insertions(+)
create mode 100644 drivers/regulator/bd96801-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index d333be2bea3b..88b8c1a23bcf 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -268,6 +268,18 @@ config REGULATOR_BD957XMUF
This driver can also be built as a module. If so, the module
will be called bd9576-regulator.
+config REGULATOR_BD96801
+ tristate "ROHM BD96801 Power Regulator"
+ depends on MFD_ROHM_BD96801
+ select REGULATOR_ROHM
+ help
+ This driver supports voltage regulators on ROHM BD96801 PMIC.
+ This will enable support for the software controllable buck
+ and LDO regulators.
+
+ This driver can also be built as a module. If so, the module
+ will be called bd96801-regulator.
+
config REGULATOR_CPCAP
tristate "Motorola CPCAP regulator"
depends on MFD_CPCAP
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index ba15fa5f30ad..9f36331df771 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_REGULATOR_BD718XX) += bd718x7-regulator.o
obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o
obj-$(CONFIG_REGULATOR_BD957XMUF) += bd9576-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x-regulator.o
+obj-$(CONFIG_REGULATOR_BD96801) += bd96801-regulator.o
obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
obj-$(CONFIG_REGULATOR_DA9055) += da9055-regulator.o
obj-$(CONFIG_REGULATOR_DA9062) += da9062-regulator.o
diff --git a/drivers/regulator/bd96801-regulator.c b/drivers/regulator/bd96801-regulator.c
new file mode 100644
index 000000000000..46ca81f18703
--- /dev/null
+++ b/drivers/regulator/bd96801-regulator.c
@@ -0,0 +1,908 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2024 ROHM Semiconductors
+// bd96801-regulator.c ROHM BD96801 regulator driver
+
+/*
+ * This version of the "BD86801 scalable PMIC"'s driver supports only very
+ * basic set of the PMIC features. Most notably, there is no support for
+ * the ERRB interrupt and the configurations which should be done when the
+ * PMIC is in STBY mode.
+ *
+ * Supporting the ERRB interrupt would require dropping the regmap-IRQ
+ * usage or working around (or accepting a presense of) a naming conflict
+ * in debugFS IRQs.
+ *
+ * Being able to reliably do the configurations like changing the
+ * regulator safety limits (like limits for the over/under -voltages, over
+ * current, thermal protection) would require the configuring driver to be
+ * synchronized with entity causing the PMIC state transitions. Eg, one
+ * should be able to ensure the PMIC is in STBY state when the
+ * configurations are applied to the hardware. How and when the PMIC state
+ * transitions are to be done is likely to be very system specific, as will
+ * be the need to configure these safety limits. Hence it's not simple to
+ * come up with a generic solution.
+ *
+ * Users who require the ERRB handling and STBY state configurations can
+ * have a look at the original RFC:
+ * https://lore.kernel.org/all/cover.1712920132.git.mazziesaccount@gmail.com/
+ * which implements a workaround to debugFS naming conflict and some of
+ * the safety limit configurations - but leaves the state change handling
+ * and synchronization to be implemented.
+ *
+ * It would be great to hear (and receive a patch!) if you implement the
+ * STBY configuration support or a proper fix to the debugFS naming
+ * conflict in your downstream driver ;)
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/linear_range.h>
+#include <linux/mfd/rohm-generic.h>
+#include <linux/mfd/rohm-bd96801.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/coupler.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+
+enum {
+ BD96801_BUCK1,
+ BD96801_BUCK2,
+ BD96801_BUCK3,
+ BD96801_BUCK4,
+ BD96801_LDO5,
+ BD96801_LDO6,
+ BD96801_LDO7,
+ BD96801_REGULATOR_AMOUNT,
+};
+
+enum {
+ BD96801_PROT_OVP,
+ BD96801_PROT_UVP,
+ BD96801_PROT_OCP,
+ BD96801_PROT_TEMP,
+ BD96801_NUM_PROT,
+};
+
+#define BD96801_ALWAYS_ON_REG 0x3c
+#define BD96801_REG_ENABLE 0x0b
+#define BD96801_BUCK1_EN_MASK BIT(0)
+#define BD96801_BUCK2_EN_MASK BIT(1)
+#define BD96801_BUCK3_EN_MASK BIT(2)
+#define BD96801_BUCK4_EN_MASK BIT(3)
+#define BD96801_LDO5_EN_MASK BIT(4)
+#define BD96801_LDO6_EN_MASK BIT(5)
+#define BD96801_LDO7_EN_MASK BIT(6)
+
+#define BD96801_BUCK1_VSEL_REG 0x28
+#define BD96801_BUCK2_VSEL_REG 0x29
+#define BD96801_BUCK3_VSEL_REG 0x2a
+#define BD96801_BUCK4_VSEL_REG 0x2b
+#define BD96801_LDO5_VSEL_REG 0x25
+#define BD96801_LDO6_VSEL_REG 0x26
+#define BD96801_LDO7_VSEL_REG 0x27
+#define BD96801_BUCK_VSEL_MASK 0x1F
+#define BD96801_LDO_VSEL_MASK 0xff
+
+#define BD96801_MASK_RAMP_DELAY 0xc0
+#define BD96801_INT_VOUT_BASE_REG 0x21
+#define BD96801_BUCK_INT_VOUT_MASK 0xff
+
+#define BD96801_BUCK_VOLTS 256
+#define BD96801_LDO_VOLTS 256
+
+#define BD96801_OVP_MASK 0x03
+#define BD96801_MASK_BUCK1_OVP_SHIFT 0x00
+#define BD96801_MASK_BUCK2_OVP_SHIFT 0x02
+#define BD96801_MASK_BUCK3_OVP_SHIFT 0x04
+#define BD96801_MASK_BUCK4_OVP_SHIFT 0x06
+#define BD96801_MASK_LDO5_OVP_SHIFT 0x00
+#define BD96801_MASK_LDO6_OVP_SHIFT 0x02
+#define BD96801_MASK_LDO7_OVP_SHIFT 0x04
+
+#define BD96801_PROT_LIMIT_OCP_MIN 0x00
+#define BD96801_PROT_LIMIT_LOW 0x01
+#define BD96801_PROT_LIMIT_MID 0x02
+#define BD96801_PROT_LIMIT_HI 0x03
+
+#define BD96801_REG_BUCK1_OCP 0x32
+#define BD96801_REG_BUCK2_OCP 0x32
+#define BD96801_REG_BUCK3_OCP 0x33
+#define BD96801_REG_BUCK4_OCP 0x33
+
+#define BD96801_MASK_BUCK1_OCP_SHIFT 0x00
+#define BD96801_MASK_BUCK2_OCP_SHIFT 0x04
+#define BD96801_MASK_BUCK3_OCP_SHIFT 0x00
+#define BD96801_MASK_BUCK4_OCP_SHIFT 0x04
+
+#define BD96801_REG_LDO5_OCP 0x34
+#define BD96801_REG_LDO6_OCP 0x34
+#define BD96801_REG_LDO7_OCP 0x34
+
+#define BD96801_MASK_LDO5_OCP_SHIFT 0x00
+#define BD96801_MASK_LDO6_OCP_SHIFT 0x02
+#define BD96801_MASK_LDO7_OCP_SHIFT 0x04
+
+#define BD96801_MASK_SHD_INTB BIT(7)
+#define BD96801_INTB_FATAL BIT(7)
+
+#define BD96801_NUM_REGULATORS 7
+#define BD96801_NUM_LDOS 4
+
+/*
+ * Ramp rates for bucks are controlled by bits [7:6] as follows:
+ * 00 => 1 mV/uS
+ * 01 => 5 mV/uS
+ * 10 => 10 mV/uS
+ * 11 => 20 mV/uS
+ */
+static const unsigned int buck_ramp_table[] = { 1000, 5000, 10000, 20000 };
+
+/*
+ * This is a voltage range that get's appended to selected
+ * bd96801_buck_init_volts value. The range from 0x0 to 0xF is actually
+ * bd96801_buck_init_volts + 0 ... bd96801_buck_init_volts + 150mV
+ * and the range from 0x10 to 0x1f is bd96801_buck_init_volts - 150mV ...
+ * bd96801_buck_init_volts - 0. But as the members of linear_range
+ * are all unsigned I will apply offset of -150 mV to value in
+ * linear_range - which should increase these ranges with
+ * 150 mV getting all the values to >= 0.
+ */
+static const struct linear_range bd96801_tune_volts[] = {
+ REGULATOR_LINEAR_RANGE(150000, 0x00, 0xF, 10000),
+ REGULATOR_LINEAR_RANGE(0, 0x10, 0x1F, 10000),
+};
+
+static const struct linear_range bd96801_buck_init_volts[] = {
+ REGULATOR_LINEAR_RANGE(500000 - 150000, 0x00, 0xc8, 5000),
+ REGULATOR_LINEAR_RANGE(1550000 - 150000, 0xc9, 0xec, 50000),
+ REGULATOR_LINEAR_RANGE(3300000 - 150000, 0xed, 0xff, 0),
+};
+
+static const struct linear_range bd96801_ldo_int_volts[] = {
+ REGULATOR_LINEAR_RANGE(300000, 0x00, 0x78, 25000),
+ REGULATOR_LINEAR_RANGE(3300000, 0x79, 0xff, 0),
+};
+
+#define BD96801_LDO_SD_VOLT_MASK 0x1
+#define BD96801_LDO_MODE_MASK 0x6
+#define BD96801_LDO_MODE_INT 0x0
+#define BD96801_LDO_MODE_SD 0x2
+#define BD96801_LDO_MODE_DDR 0x4
+
+static int ldo_ddr_volt_table[] = {500000, 300000};
+static int ldo_sd_volt_table[] = {3300000, 1800000};
+
+/* Constant IRQ initialization data (templates) */
+struct bd96801_irqinfo {
+ int type;
+ struct regulator_irq_desc irq_desc;
+ int err_cfg;
+ int wrn_cfg;
+ const char *irq_name;
+};
+
+#define BD96801_IRQINFO(_type, _name, _irqoff_ms, _irqname) \
+{ \
+ .type = (_type), \
+ .err_cfg = -1, \
+ .wrn_cfg = -1, \
+ .irq_name = (_irqname), \
+ .irq_desc = { \
+ .name = (_name), \
+ .irq_off_ms = (_irqoff_ms), \
+ .map_event = regulator_irq_map_event_simple, \
+ }, \
+}
+
+static const struct bd96801_irqinfo buck1_irqinfo[] = {
+ BD96801_IRQINFO(BD96801_PROT_OCP, "buck1-over-curr-h", 500,
+ "bd96801-buck1-overcurr-h"),
+ BD96801_IRQINFO(BD96801_PROT_OCP, "buck1-over-curr-l", 500,
+ "bd96801-buck1-overcurr-l"),
+ BD96801_IRQINFO(BD96801_PROT_OCP, "buck1-over-curr-n", 500,
+ "bd96801-buck1-overcurr-n"),
+ BD96801_IRQINFO(BD96801_PROT_OVP, "buck1-over-voltage", 500,
+ "bd96801-buck1-overvolt"),
+ BD96801_IRQINFO(BD96801_PROT_UVP, "buck1-under-voltage", 500,
+ "bd96801-buck1-undervolt"),
+ BD96801_IRQINFO(BD96801_PROT_TEMP, "buck1-over-temp", 500,
+ "bd96801-buck1-thermal")
+};
+
+static const struct bd96801_irqinfo buck2_irqinfo[] = {
+ BD96801_IRQINFO(BD96801_PROT_OCP, "buck2-over-curr-h", 500,
+ "bd96801-buck2-overcurr-h"),
+ BD96801_IRQINFO(BD96801_PROT_OCP, "buck2-over-curr-l", 500,
+ "bd96801-buck2-overcurr-l"),
+ BD96801_IRQINFO(BD96801_PROT_OCP, "buck2-over-curr-n", 500,
+ "bd96801-buck2-overcurr-n"),
+ BD96801_IRQINFO(BD96801_PROT_OVP, "buck2-over-voltage", 500,
+ "bd96801-buck2-overvolt"),
+ BD96801_IRQINFO(BD96801_PROT_UVP, "buck2-under-voltage", 500,
+ "bd96801-buck2-undervolt"),
+ BD96801_IRQINFO(BD96801_PROT_TEMP, "buck2-over-temp", 500,
+ "bd96801-buck2-thermal")
+};
+
+static const struct bd96801_irqinfo buck3_irqinfo[] = {
+ BD96801_IRQINFO(BD96801_PROT_OCP, "buck3-over-curr-h", 500,
+ "bd96801-buck3-overcurr-h"),
+ BD96801_IRQINFO(BD96801_PROT_OCP, "buck3-over-curr-l", 500,
+ "bd96801-buck3-overcurr-l"),
+ BD96801_IRQINFO(BD96801_PROT_OCP, "buck3-over-curr-n", 500,
+ "bd96801-buck3-overcurr-n"),
+ BD96801_IRQINFO(BD96801_PROT_OVP, "buck3-over-voltage", 500,
+ "bd96801-buck3-overvolt"),
+ BD96801_IRQINFO(BD96801_PROT_UVP, "buck3-under-voltage", 500,
+ "bd96801-buck3-undervolt"),
+ BD96801_IRQINFO(BD96801_PROT_TEMP, "buck3-over-temp", 500,
+ "bd96801-buck3-thermal")
+};
+
+static const struct bd96801_irqinfo buck4_irqinfo[] = {
+ BD96801_IRQINFO(BD96801_PROT_OCP, "buck4-over-curr-h", 500,
+ "bd96801-buck4-overcurr-h"),
+ BD96801_IRQINFO(BD96801_PROT_OCP, "buck4-over-curr-l", 500,
+ "bd96801-buck4-overcurr-l"),
+ BD96801_IRQINFO(BD96801_PROT_OCP, "buck4-over-curr-n", 500,
+ "bd96801-buck4-overcurr-n"),
+ BD96801_IRQINFO(BD96801_PROT_OVP, "buck4-over-voltage", 500,
+ "bd96801-buck4-overvolt"),
+ BD96801_IRQINFO(BD96801_PROT_UVP, "buck4-under-voltage", 500,
+ "bd96801-buck4-undervolt"),
+ BD96801_IRQINFO(BD96801_PROT_TEMP, "buck4-over-temp", 500,
+ "bd96801-buck4-thermal")
+};
+
+static const struct bd96801_irqinfo ldo5_irqinfo[] = {
+ BD96801_IRQINFO(BD96801_PROT_OCP, "ldo5-overcurr", 500,
+ "bd96801-ldo5-overcurr"),
+ BD96801_IRQINFO(BD96801_PROT_OVP, "ldo5-over-voltage", 500,
+ "bd96801-ldo5-overvolt"),
+ BD96801_IRQINFO(BD96801_PROT_UVP, "ldo5-under-voltage", 500,
+ "bd96801-ldo5-undervolt"),
+};
+
+static const struct bd96801_irqinfo ldo6_irqinfo[] = {
+ BD96801_IRQINFO(BD96801_PROT_OCP, "ldo6-overcurr", 500,
+ "bd96801-ldo6-overcurr"),
+ BD96801_IRQINFO(BD96801_PROT_OVP, "ldo6-over-voltage", 500,
+ "bd96801-ldo6-overvolt"),
+ BD96801_IRQINFO(BD96801_PROT_UVP, "ldo6-under-voltage", 500,
+ "bd96801-ldo6-undervolt"),
+};
+
+static const struct bd96801_irqinfo ldo7_irqinfo[] = {
+ BD96801_IRQINFO(BD96801_PROT_OCP, "ldo7-overcurr", 500,
+ "bd96801-ldo7-overcurr"),
+ BD96801_IRQINFO(BD96801_PROT_OVP, "ldo7-over-voltage", 500,
+ "bd96801-ldo7-overvolt"),
+ BD96801_IRQINFO(BD96801_PROT_UVP, "ldo7-under-voltage", 500,
+ "bd96801-ldo7-undervolt"),
+};
+
+struct bd96801_irq_desc {
+ struct bd96801_irqinfo *irqinfo;
+ int num_irqs;
+};
+
+struct bd96801_regulator_data {
+ struct regulator_desc desc;
+ const struct linear_range *init_ranges;
+ int num_ranges;
+ struct bd96801_irq_desc irq_desc;
+ int initial_voltage;
+ int ldo_vol_lvl;
+ int ldo_errs;
+};
+
+struct bd96801_pmic_data {
+ struct bd96801_regulator_data regulator_data[BD96801_NUM_REGULATORS];
+ struct regmap *regmap;
+ int fatal_ind;
+};
+
+static int ldo_map_notif(int irq, struct regulator_irq_data *rid,
+ unsigned long *dev_mask)
+{
+ int i;
+
+ for (i = 0; i < rid->num_states; i++) {
+ struct bd96801_regulator_data *rdata;
+ struct regulator_dev *rdev;
+
+ rdev = rid->states[i].rdev;
+ rdata = container_of(rdev->desc, struct bd96801_regulator_data,
+ desc);
+ rid->states[i].notifs = regulator_err2notif(rdata->ldo_errs);
+ rid->states[i].errors = rdata->ldo_errs;
+ *dev_mask |= BIT(i);
+ }
+ return 0;
+}
+
+static int bd96801_list_voltage_lr(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ int voltage;
+ struct bd96801_regulator_data *data;
+
+ data = container_of(rdev->desc, struct bd96801_regulator_data, desc);
+
+ /*
+ * The BD096801 has voltage setting in two registers. One giving the
+ * "initial voltage" (can be changed only when regulator is disabled.
+ * This driver caches the value and sets it only at startup. The other
+ * register is voltage tuning value which applies -150 mV ... +150 mV
+ * offset to the voltage.
+ *
+ * Note that the cached initial voltage stored in regulator data is
+ * 'scaled down' by the 150 mV so that all of our tuning values are
+ * >= 0. This is done because the linear_ranges uses unsigned values.
+ *
+ * As a result, we increase the tuning voltage which we get based on
+ * the selector by the stored initial_voltage.
+ */
+ voltage = regulator_list_voltage_linear_range(rdev, selector);
+ if (voltage < 0)
+ return voltage;
+
+ return voltage + data->initial_voltage;
+}
+
+
+static const struct regulator_ops bd96801_ldo_table_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static const struct regulator_ops bd96801_buck_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = bd96801_list_voltage_lr,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = regulator_set_ramp_delay_regmap,
+};
+
+static const struct regulator_ops bd96801_ldo_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static int buck_get_initial_voltage(struct regmap *regmap, struct device *dev,
+ struct bd96801_regulator_data *data)
+{
+ int ret = 0, sel, initial_uv;
+ int reg = BD96801_INT_VOUT_BASE_REG + data->desc.id;
+
+ if (data->num_ranges) {
+ ret = regmap_read(regmap, reg, &sel);
+ sel &= BD96801_BUCK_INT_VOUT_MASK;
+
+ ret = linear_range_get_value_array(data->init_ranges,
+ data->num_ranges, sel,
+ &initial_uv);
+ if (ret)
+ return ret;
+
+ data->initial_voltage = initial_uv;
+ dev_dbg(dev, "Tune-scaled initial voltage %u\n",
+ data->initial_voltage);
+ }
+
+ return 0;
+}
+
+static int get_ldo_initial_voltage(struct regmap *regmap,
+ struct device *dev,
+ struct bd96801_regulator_data *data)
+{
+ int ret;
+ int cfgreg;
+
+ ret = regmap_read(regmap, data->ldo_vol_lvl, &cfgreg);
+ if (ret)
+ return ret;
+
+ switch (cfgreg & BD96801_LDO_MODE_MASK) {
+ case BD96801_LDO_MODE_DDR:
+ data->desc.volt_table = ldo_ddr_volt_table;
+ data->desc.n_voltages = ARRAY_SIZE(ldo_ddr_volt_table);
+ break;
+ case BD96801_LDO_MODE_SD:
+ data->desc.volt_table = ldo_sd_volt_table;
+ data->desc.n_voltages = ARRAY_SIZE(ldo_sd_volt_table);
+ break;
+ default:
+ dev_info(dev, "Leaving LDO to normal mode");
+ return 0;
+ }
+
+ /* SD or DDR mode => override default ops */
+ data->desc.ops = &bd96801_ldo_table_ops,
+ data->desc.vsel_mask = 1;
+ data->desc.vsel_reg = data->ldo_vol_lvl;
+
+ return 0;
+}
+
+static int get_initial_voltage(struct device *dev, struct regmap *regmap,
+ struct bd96801_regulator_data *data)
+{
+ /* BUCK */
+ if (data->desc.id <= BD96801_BUCK4)
+ return buck_get_initial_voltage(regmap, dev, data);
+
+ /* LDO */
+ return get_ldo_initial_voltage(regmap, dev, data);
+}
+
+static int bd96801_walk_regulator_dt(struct device *dev, struct regmap *regmap,
+ struct bd96801_regulator_data *data,
+ int num)
+{
+ int i, ret;
+ struct device_node *np;
+ struct device_node *nproot = dev->parent->of_node;
+
+ nproot = of_get_child_by_name(nproot, "regulators");
+ if (!nproot) {
+ dev_err(dev, "failed to find regulators node\n");
+ return -ENODEV;
+ }
+ for_each_child_of_node(nproot, np)
+ for (i = 0; i < num; i++) {
+ if (!of_node_name_eq(np, data[i].desc.of_match))
+ continue;
+ /*
+ * If STBY configs are supported, we must pass node
+ * here to extract the initial voltages from the DT.
+ * Thus we do the initial voltage getting in this
+ * loop.
+ */
+ ret = get_initial_voltage(dev, regmap, &data[i]);
+ if (ret) {
+ dev_err(dev,
+ "Initializing voltages for %s failed\n",
+ data[i].desc.name);
+ of_node_put(np);
+ of_node_put(nproot);
+
+ return ret;
+ }
+ if (of_property_read_bool(np, "rohm,keep-on-stby")) {
+ ret = regmap_set_bits(regmap,
+ BD96801_ALWAYS_ON_REG,
+ 1 << data[i].desc.id);
+ if (ret) {
+ dev_err(dev,
+ "failed to set %s on-at-stby\n",
+ data[i].desc.name);
+ of_node_put(np);
+ of_node_put(nproot);
+
+ return ret;
+ }
+ }
+ }
+ of_node_put(nproot);
+
+ return 0;
+}
+
+/*
+ * Template for regulator data. Probe will allocate dynamic / driver instance
+ * struct so we should be on a safe side even if there were multiple PMICs to
+ * control. Note that there is a plan to allow multiple PMICs to be used so
+ * systems can scale better. I am however still slightly unsure how the
+ * multi-PMIC case will be handled. I don't know if the processor will have I2C
+ * acces to all of the PMICs or only the first one. I'd guess there will be
+ * access provided to all PMICs for voltage scaling - but the errors will only
+ * be informed via the master PMIC. Eg, we should prepare to support multiple
+ * driver instances - either with or without the IRQs... Well, let's first
+ * just support the simple and clear single-PMIC setup and ponder the multi PMIC
+ * case later. What we can easly do for preparing is to not use static global
+ * data for regulators though.
+ */
+static const struct bd96801_pmic_data bd96801_data = {
+ .regulator_data = {
+ {
+ .desc = {
+ .name = "buck1",
+ .of_match = of_match_ptr("buck1"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD96801_BUCK1,
+ .ops = &bd96801_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd96801_tune_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd96801_tune_volts),
+ .n_voltages = BD96801_BUCK_VOLTS,
+ .enable_reg = BD96801_REG_ENABLE,
+ .enable_mask = BD96801_BUCK1_EN_MASK,
+ .enable_is_inverted = true,
+ .vsel_reg = BD96801_BUCK1_VSEL_REG,
+ .vsel_mask = BD96801_BUCK_VSEL_MASK,
+ .ramp_reg = BD96801_BUCK1_VSEL_REG,
+ .ramp_mask = BD96801_MASK_RAMP_DELAY,
+ .ramp_delay_table = &buck_ramp_table[0],
+ .n_ramp_values = ARRAY_SIZE(buck_ramp_table),
+ .owner = THIS_MODULE,
+ },
+ .init_ranges = bd96801_buck_init_volts,
+ .num_ranges = ARRAY_SIZE(bd96801_buck_init_volts),
+ .irq_desc = {
+ .irqinfo = (struct bd96801_irqinfo *)&buck1_irqinfo[0],
+ .num_irqs = ARRAY_SIZE(buck1_irqinfo),
+ },
+ }, {
+ .desc = {
+ .name = "buck2",
+ .of_match = of_match_ptr("buck2"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD96801_BUCK2,
+ .ops = &bd96801_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd96801_tune_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd96801_tune_volts),
+ .n_voltages = BD96801_BUCK_VOLTS,
+ .enable_reg = BD96801_REG_ENABLE,
+ .enable_mask = BD96801_BUCK2_EN_MASK,
+ .enable_is_inverted = true,
+ .vsel_reg = BD96801_BUCK2_VSEL_REG,
+ .vsel_mask = BD96801_BUCK_VSEL_MASK,
+ .ramp_reg = BD96801_BUCK2_VSEL_REG,
+ .ramp_mask = BD96801_MASK_RAMP_DELAY,
+ .ramp_delay_table = &buck_ramp_table[0],
+ .n_ramp_values = ARRAY_SIZE(buck_ramp_table),
+ .owner = THIS_MODULE,
+ },
+ .irq_desc = {
+ .irqinfo = (struct bd96801_irqinfo *)&buck2_irqinfo[0],
+ .num_irqs = ARRAY_SIZE(buck2_irqinfo),
+ },
+ .init_ranges = bd96801_buck_init_volts,
+ .num_ranges = ARRAY_SIZE(bd96801_buck_init_volts),
+ }, {
+ .desc = {
+ .name = "buck3",
+ .of_match = of_match_ptr("buck3"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD96801_BUCK3,
+ .ops = &bd96801_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd96801_tune_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd96801_tune_volts),
+ .n_voltages = BD96801_BUCK_VOLTS,
+ .enable_reg = BD96801_REG_ENABLE,
+ .enable_mask = BD96801_BUCK3_EN_MASK,
+ .enable_is_inverted = true,
+ .vsel_reg = BD96801_BUCK3_VSEL_REG,
+ .vsel_mask = BD96801_BUCK_VSEL_MASK,
+ .ramp_reg = BD96801_BUCK3_VSEL_REG,
+ .ramp_mask = BD96801_MASK_RAMP_DELAY,
+ .ramp_delay_table = &buck_ramp_table[0],
+ .n_ramp_values = ARRAY_SIZE(buck_ramp_table),
+ .owner = THIS_MODULE,
+ },
+ .irq_desc = {
+ .irqinfo = (struct bd96801_irqinfo *)&buck3_irqinfo[0],
+ .num_irqs = ARRAY_SIZE(buck3_irqinfo),
+ },
+ .init_ranges = bd96801_buck_init_volts,
+ .num_ranges = ARRAY_SIZE(bd96801_buck_init_volts),
+ }, {
+ .desc = {
+ .name = "buck4",
+ .of_match = of_match_ptr("buck4"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD96801_BUCK4,
+ .ops = &bd96801_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd96801_tune_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd96801_tune_volts),
+ .n_voltages = BD96801_BUCK_VOLTS,
+ .enable_reg = BD96801_REG_ENABLE,
+ .enable_mask = BD96801_BUCK4_EN_MASK,
+ .enable_is_inverted = true,
+ .vsel_reg = BD96801_BUCK4_VSEL_REG,
+ .vsel_mask = BD96801_BUCK_VSEL_MASK,
+ .ramp_reg = BD96801_BUCK4_VSEL_REG,
+ .ramp_mask = BD96801_MASK_RAMP_DELAY,
+ .ramp_delay_table = &buck_ramp_table[0],
+ .n_ramp_values = ARRAY_SIZE(buck_ramp_table),
+ .owner = THIS_MODULE,
+ },
+ .irq_desc = {
+ .irqinfo = (struct bd96801_irqinfo *)&buck4_irqinfo[0],
+ .num_irqs = ARRAY_SIZE(buck4_irqinfo),
+ },
+ .init_ranges = bd96801_buck_init_volts,
+ .num_ranges = ARRAY_SIZE(bd96801_buck_init_volts),
+ }, {
+ .desc = {
+ .name = "ldo5",
+ .of_match = of_match_ptr("ldo5"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD96801_LDO5,
+ .ops = &bd96801_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd96801_ldo_int_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd96801_ldo_int_volts),
+ .n_voltages = BD96801_LDO_VOLTS,
+ .enable_reg = BD96801_REG_ENABLE,
+ .enable_mask = BD96801_LDO5_EN_MASK,
+ .enable_is_inverted = true,
+ .vsel_reg = BD96801_LDO5_VSEL_REG,
+ .vsel_mask = BD96801_LDO_VSEL_MASK,
+ .owner = THIS_MODULE,
+ },
+ .irq_desc = {
+ .irqinfo = (struct bd96801_irqinfo *)&ldo5_irqinfo[0],
+ .num_irqs = ARRAY_SIZE(ldo5_irqinfo),
+ },
+ .ldo_vol_lvl = BD96801_LDO5_VOL_LVL_REG,
+ }, {
+ .desc = {
+ .name = "ldo6",
+ .of_match = of_match_ptr("ldo6"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD96801_LDO6,
+ .ops = &bd96801_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd96801_ldo_int_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd96801_ldo_int_volts),
+ .n_voltages = BD96801_LDO_VOLTS,
+ .enable_reg = BD96801_REG_ENABLE,
+ .enable_mask = BD96801_LDO6_EN_MASK,
+ .enable_is_inverted = true,
+ .vsel_reg = BD96801_LDO6_VSEL_REG,
+ .vsel_mask = BD96801_LDO_VSEL_MASK,
+ .owner = THIS_MODULE,
+ },
+ .irq_desc = {
+ .irqinfo = (struct bd96801_irqinfo *)&ldo6_irqinfo[0],
+ .num_irqs = ARRAY_SIZE(ldo6_irqinfo),
+ },
+ .ldo_vol_lvl = BD96801_LDO6_VOL_LVL_REG,
+ }, {
+ .desc = {
+ .name = "ldo7",
+ .of_match = of_match_ptr("ldo7"),
+ .regulators_node = of_match_ptr("regulators"),
+ .id = BD96801_LDO7,
+ .ops = &bd96801_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .linear_ranges = bd96801_ldo_int_volts,
+ .n_linear_ranges = ARRAY_SIZE(bd96801_ldo_int_volts),
+ .n_voltages = BD96801_LDO_VOLTS,
+ .enable_reg = BD96801_REG_ENABLE,
+ .enable_mask = BD96801_LDO7_EN_MASK,
+ .enable_is_inverted = true,
+ .vsel_reg = BD96801_LDO7_VSEL_REG,
+ .vsel_mask = BD96801_LDO_VSEL_MASK,
+ .owner = THIS_MODULE,
+ },
+ .irq_desc = {
+ .irqinfo = (struct bd96801_irqinfo *)&ldo7_irqinfo[0],
+ .num_irqs = ARRAY_SIZE(ldo7_irqinfo),
+ },
+ .ldo_vol_lvl = BD96801_LDO7_VOL_LVL_REG,
+ },
+ },
+};
+
+static int initialize_pmic_data(struct device *dev,
+ struct bd96801_pmic_data *pdata)
+{
+ int r, i;
+
+ /*
+ * Allocate and initialize IRQ data for all of the regulators. We
+ * wish to modify IRQ information independently for each driver
+ * instance.
+ */
+ for (r = 0; r < BD96801_NUM_REGULATORS; r++) {
+ const struct bd96801_irqinfo *template;
+ struct bd96801_irqinfo *new;
+ int num_infos;
+
+ template = pdata->regulator_data[r].irq_desc.irqinfo;
+ num_infos = pdata->regulator_data[r].irq_desc.num_irqs;
+
+ new = devm_kcalloc(dev, num_infos, sizeof(*new), GFP_KERNEL);
+ if (!new)
+ return -ENOMEM;
+
+ pdata->regulator_data[r].irq_desc.irqinfo = new;
+
+ for (i = 0; i < num_infos; i++)
+ new[i] = template[i];
+ }
+
+ return 0;
+}
+
+static int bd96801_rdev_intb_irqs(struct platform_device *pdev,
+ struct bd96801_pmic_data *pdata,
+ struct bd96801_irqinfo *iinfo,
+ struct regulator_dev *rdev)
+{
+ struct regulator_dev *rdev_arr[1];
+ void *retp;
+ int err = 0;
+ int irq;
+ int err_flags[] = {
+ [BD96801_PROT_OVP] = REGULATOR_ERROR_REGULATION_OUT,
+ [BD96801_PROT_UVP] = REGULATOR_ERROR_UNDER_VOLTAGE,
+ [BD96801_PROT_OCP] = REGULATOR_ERROR_OVER_CURRENT,
+ [BD96801_PROT_TEMP] = REGULATOR_ERROR_OVER_TEMP,
+
+ };
+ int wrn_flags[] = {
+ [BD96801_PROT_OVP] = REGULATOR_ERROR_OVER_VOLTAGE_WARN,
+ [BD96801_PROT_UVP] = REGULATOR_ERROR_UNDER_VOLTAGE_WARN,
+ [BD96801_PROT_OCP] = REGULATOR_ERROR_OVER_CURRENT_WARN,
+ [BD96801_PROT_TEMP] = REGULATOR_ERROR_OVER_TEMP_WARN,
+ };
+
+ /*
+ * Don't install IRQ handler if both error and warning
+ * notifications are explicitly disabled
+ */
+ if (!iinfo->err_cfg && !iinfo->wrn_cfg)
+ return 0;
+
+ if (WARN_ON(iinfo->type >= BD96801_NUM_PROT))
+ return -EINVAL;
+
+ if (iinfo->err_cfg)
+ err = err_flags[iinfo->type];
+ else if (iinfo->wrn_cfg)
+ err = wrn_flags[iinfo->type];
+
+ iinfo->irq_desc.data = pdata;
+ irq = platform_get_irq_byname(pdev, iinfo->irq_name);
+ if (irq < 0)
+ return irq;
+ /* Find notifications for this IRQ (WARN/ERR) */
+
+ rdev_arr[0] = rdev;
+ retp = devm_regulator_irq_helper(&pdev->dev,
+ &iinfo->irq_desc, irq,
+ 0, err, NULL, rdev_arr,
+ 1);
+ if (IS_ERR(retp))
+ return PTR_ERR(retp);
+
+ return 0;
+}
+
+
+
+static int bd96801_probe(struct platform_device *pdev)
+{
+ struct regulator_dev *ldo_errs_rdev_arr[BD96801_NUM_LDOS];
+ struct bd96801_regulator_data *rdesc;
+ struct regulator_config config = {};
+ int ldo_errs_arr[BD96801_NUM_LDOS];
+ struct bd96801_pmic_data *pdata;
+ int temp_notif_ldos = 0;
+ struct device *parent;
+ int i, ret;
+ void *retp;
+
+ parent = pdev->dev.parent;
+
+ pdata = devm_kmemdup(&pdev->dev, &bd96801_data, sizeof(bd96801_data),
+ GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ if (initialize_pmic_data(&pdev->dev, pdata))
+ return -ENOMEM;
+
+ pdata->regmap = dev_get_regmap(parent, NULL);
+ if (!pdata->regmap) {
+ dev_err(&pdev->dev, "No register map found\n");
+ return -ENODEV;
+ }
+
+ rdesc = &pdata->regulator_data[0];
+
+ config.driver_data = pdata;
+ config.regmap = pdata->regmap;
+ config.dev = parent;
+
+ ret = bd96801_walk_regulator_dt(&pdev->dev, pdata->regmap, rdesc,
+ BD96801_NUM_REGULATORS);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(pdata->regulator_data); i++) {
+ struct regulator_dev *rdev;
+ struct bd96801_irq_desc *idesc = &rdesc[i].irq_desc;
+ int j;
+
+ rdev = devm_regulator_register(&pdev->dev,
+ &rdesc[i].desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev,
+ "failed to register %s regulator\n",
+ rdesc[i].desc.name);
+ return PTR_ERR(rdev);
+ }
+ /*
+ * LDOs don't have own temperature monitoring. If temperature
+ * notification was requested for this LDO from DT then we will
+ * add the regulator to be notified if central IC temperature
+ * exceeds threshold.
+ */
+ if (rdesc[i].ldo_errs) {
+ ldo_errs_rdev_arr[temp_notif_ldos] = rdev;
+ ldo_errs_arr[temp_notif_ldos] = rdesc[i].ldo_errs;
+ temp_notif_ldos++;
+ }
+ if (!idesc)
+ continue;
+
+ /* Register INTB handlers for configured protections */
+ for (j = 0; j < idesc->num_irqs; j++) {
+ ret = bd96801_rdev_intb_irqs(pdev, pdata,
+ &idesc->irqinfo[j], rdev);
+ if (ret)
+ return ret;
+ }
+ }
+ if (temp_notif_ldos) {
+ int irq;
+ struct regulator_irq_desc tw_desc = {
+ .name = "bd96801-core-thermal",
+ .irq_off_ms = 500,
+ .map_event = ldo_map_notif,
+ };
+
+ irq = platform_get_irq_byname(pdev, "bd96801-core-thermal");
+ if (irq < 0)
+ return irq;
+
+ retp = devm_regulator_irq_helper(&pdev->dev, &tw_desc, irq, 0,
+ 0, &ldo_errs_arr[0],
+ &ldo_errs_rdev_arr[0],
+ temp_notif_ldos);
+ if (IS_ERR(retp))
+ return PTR_ERR(retp);
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id bd96801_pmic_id[] = {
+ { "bd96801-regulator", },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, bd96801_pmic_id);
+
+static struct platform_driver bd96801_regulator = {
+ .driver = {
+ .name = "bd96801-pmic"
+ },
+ .probe = bd96801_probe,
+ .id_table = bd96801_pmic_id,
+};
+
+module_platform_driver(bd96801_regulator);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("BD96801 voltage regulator driver");
+MODULE_LICENSE("GPL");
--
2.45.1
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v5 5/6] watchdog: ROHM BD96801 PMIC WDG driver
2024-06-27 7:42 [PATCH v5 0/6] Support ROHM BD96801 Scalable PMIC Matti Vaittinen
` (3 preceding siblings ...)
2024-06-27 7:43 ` [PATCH v5 4/6] regulator: bd96801: ROHM BD96801 PMIC regulators Matti Vaittinen
@ 2024-06-27 7:43 ` Matti Vaittinen
2024-06-27 7:44 ` [PATCH v5 6/6] MAINTAINERS: Add ROHM BD96801 'scalable PMIC' entries Matti Vaittinen
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Matti Vaittinen @ 2024-06-27 7:43 UTC (permalink / raw)
To: Matti Vaittinen, Matti Vaittinen
Cc: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Liam Girdwood, Mark Brown, Matti Vaittinen, Wim Van Sebroeck,
Guenter Roeck, devicetree, linux-kernel, linux-watchdog
[-- Attachment #1: Type: text/plain, Size: 14410 bytes --]
Introduce driver for WDG block on ROHM BD96801 scalable PMIC.
This driver only supports watchdog with I2C feeding and delayed
response detection. Whether the watchdog toggles PRSTB pin or
just causes an interrupt can be configured via device-tree.
The BD96801 PMIC HW supports also window watchdog (too early
feeding detection) and Q&A mode. These are not supported by
this driver.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
---
Revision history:
v2 =>:
- No changes
v1 => v2:
- Drop the forward declaration for emergency_reboot()
- Typofixes
- Do error checks before assignments in find_closest_fast()
- Improve prints for unsupported (HW) timeout values
- Use FIELD_GET() and FIELD_PREP()
- Use error severity when unsupported Q&A WDG mode is tried to be used.
- Minor styling fixes
RFCv2 => v1:
- Fix watchdog time-outs to match DS4
- Fix target timeout overflow
- Improve dbg prints
RFCv1 => RFCv2:
- remove always running
- add IRQ handling
- call emergency_restart()
- drop MODULE_ALIAS and add MODULE_DEVICE_TABLE
watchdog: bd96801: styling fix
---
drivers/watchdog/Kconfig | 13 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/bd96801_wdt.c | 416 +++++++++++++++++++++++++++++++++
3 files changed, 430 insertions(+)
create mode 100644 drivers/watchdog/bd96801_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 85eea38dbdf4..ceb3431f23b8 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -181,6 +181,19 @@ config BD957XMUF_WATCHDOG
watchdog. Alternatively say M to compile the driver as a module,
which will be called bd9576_wdt.
+config BD96801_WATCHDOG
+ tristate "ROHM BD96801 PMIC Watchdog"
+ depends on MFD_ROHM_BD96801
+ select WATCHDOG_CORE
+ help
+ Support for the watchdog in the ROHM BD96801 PMIC. Watchdog can be
+ configured to only generate IRQ or to trigger system reset via reset
+ pin.
+
+ Say Y here to include support for the ROHM BD96801 watchdog.
+ Alternatively say M to compile the driver as a module,
+ which will be called bd96801_wdt.
+
config CROS_EC_WATCHDOG
tristate "ChromeOS EC-based watchdog"
select WATCHDOG_CORE
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 2d1117564f5b..b51030f035a6 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -218,6 +218,7 @@ obj-$(CONFIG_XEN_WDT) += xen_wdt.o
# Architecture Independent
obj-$(CONFIG_BD957XMUF_WATCHDOG) += bd9576_wdt.o
+obj-$(CONFIG_BD96801_WATCHDOG) += bd96801_wdt.o
obj-$(CONFIG_CROS_EC_WATCHDOG) += cros_ec_wdt.o
obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
diff --git a/drivers/watchdog/bd96801_wdt.c b/drivers/watchdog/bd96801_wdt.c
new file mode 100644
index 000000000000..ff51f42ced2a
--- /dev/null
+++ b/drivers/watchdog/bd96801_wdt.c
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2024 ROHM Semiconductors
+ *
+ * ROHM BD96801 watchdog driver
+ */
+
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/rohm-bd96801.h>
+#include <linux/mfd/rohm-generic.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <linux/watchdog.h>
+
+static bool nowayout;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default=\"false\")");
+
+#define BD96801_WD_TMO_SHORT_MASK 0x70
+#define BD96801_WD_RATIO_MASK 0x3
+#define BD96801_WD_TYPE_MASK 0x4
+#define BD96801_WD_TYPE_SLOW 0x4
+#define BD96801_WD_TYPE_WIN 0x0
+
+#define BD96801_WD_EN_MASK 0x3
+#define BD96801_WD_IF_EN 0x1
+#define BD96801_WD_QA_EN 0x2
+#define BD96801_WD_DISABLE 0x0
+
+#define BD96801_WD_ASSERT_MASK 0x8
+#define BD96801_WD_ASSERT_RST 0x8
+#define BD96801_WD_ASSERT_IRQ 0x0
+
+#define BD96801_WD_FEED_MASK 0x1
+#define BD96801_WD_FEED 0x1
+
+/* 1.1 mS */
+#define FASTNG_MIN 11
+#define FASTNG_MAX_US (100 * FASTNG_MIN << 7)
+#define SLOWNG_MAX_US (16 * FASTNG_MAX_US)
+
+#define BD96801_WDT_DEFAULT_MARGIN_MS 1843
+/* Unit is seconds */
+#define DEFAULT_TIMEOUT 30
+
+/*
+ * BD96801 WDG supports window mode so the TMO consists of SHORT and LONG
+ * timeout values. SHORT time is meaningful only in window mode where feeding
+ * period shorter than SHORT would be an error. LONG time is used to detect if
+ * feeding is not occurring within given time limit (SoC SW hangs). The LONG
+ * timeout time is a multiple of (2, 4, 8 or 16 times) the SHORT timeout.
+ */
+
+struct wdtbd96801 {
+ struct device *dev;
+ struct regmap *regmap;
+ struct watchdog_device wdt;
+};
+
+static int bd96801_wdt_ping(struct watchdog_device *wdt)
+{
+ struct wdtbd96801 *w = watchdog_get_drvdata(wdt);
+
+ return regmap_update_bits(w->regmap, BD96801_REG_WD_FEED,
+ BD96801_WD_FEED_MASK, BD96801_WD_FEED);
+}
+
+static int bd96801_wdt_start(struct watchdog_device *wdt)
+{
+ struct wdtbd96801 *w = watchdog_get_drvdata(wdt);
+
+ return regmap_update_bits(w->regmap, BD96801_REG_WD_CONF,
+ BD96801_WD_EN_MASK, BD96801_WD_IF_EN);
+}
+
+static int bd96801_wdt_stop(struct watchdog_device *wdt)
+{
+ struct wdtbd96801 *w = watchdog_get_drvdata(wdt);
+
+ return regmap_update_bits(w->regmap, BD96801_REG_WD_CONF,
+ BD96801_WD_EN_MASK, BD96801_WD_DISABLE);
+}
+
+static const struct watchdog_info bd96801_wdt_info = {
+ .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING |
+ WDIOF_SETTIMEOUT,
+ .identity = "BD96801 Watchdog",
+};
+
+static const struct watchdog_ops bd96801_wdt_ops = {
+ .start = bd96801_wdt_start,
+ .stop = bd96801_wdt_stop,
+ .ping = bd96801_wdt_ping,
+};
+
+static int find_closest_fast(unsigned int target, int *sel, unsigned int *val)
+{
+ unsigned int window = FASTNG_MIN;
+ int i;
+
+ for (i = 0; i < 8 && window < target; i++)
+ window <<= 1;
+
+ if (i == 8)
+ return -EINVAL;
+
+ *val = window;
+ *sel = i;
+
+ return 0;
+}
+
+static int find_closest_slow_by_fast(unsigned int fast_val, unsigned int *target,
+ int *slowsel)
+{
+ static const int multipliers[] = {2, 4, 8, 16};
+ int sel;
+
+ for (sel = 0; sel < ARRAY_SIZE(multipliers) &&
+ multipliers[sel] * fast_val < *target; sel++)
+ ;
+
+ if (sel == ARRAY_SIZE(multipliers))
+ return -EINVAL;
+
+ *slowsel = sel;
+ *target = multipliers[sel] * fast_val;
+
+ return 0;
+}
+
+static int find_closest_slow(unsigned int *target, int *slow_sel, int *fast_sel)
+{
+ static const int multipliers[] = {2, 4, 8, 16};
+ unsigned int window = FASTNG_MIN;
+ unsigned int val = 0;
+ int i, j;
+
+ for (i = 0; i < 8; i++) {
+ for (j = 0; j < ARRAY_SIZE(multipliers); j++) {
+ unsigned int slow;
+
+ slow = window * multipliers[j];
+ if (slow >= *target && (!val || slow < val)) {
+ val = slow;
+ *fast_sel = i;
+ *slow_sel = j;
+ }
+ }
+ window <<= 1;
+ }
+ if (!val)
+ return -EINVAL;
+
+ *target = val;
+
+ return 0;
+}
+
+static int bd96801_set_wdt_mode(struct wdtbd96801 *w, unsigned int hw_margin,
+ unsigned int hw_margin_min)
+{
+ int fastng, slowng, type, ret, reg, mask;
+ struct device *dev = w->dev;
+
+
+ if (hw_margin_min * 1000 > FASTNG_MAX_US) {
+ dev_err(dev, "Unsupported fast timeout %u uS [max %u]\n",
+ hw_margin_min * 1000, FASTNG_MAX_US);
+
+ return -EINVAL;
+ }
+
+ if (hw_margin * 1000 > SLOWNG_MAX_US) {
+ dev_err(dev, "Unsupported slow timeout %u uS [max %u]\n",
+ hw_margin * 1000, SLOWNG_MAX_US);
+
+ return -EINVAL;
+ }
+
+ /*
+ * Convert to 100uS to guarantee reasonable timeouts fit in
+ * 32bit maintaining also a decent accuracy.
+ */
+ hw_margin *= 10;
+ hw_margin_min *= 10;
+
+ if (hw_margin_min) {
+ unsigned int min;
+
+ type = BD96801_WD_TYPE_WIN;
+ dev_dbg(dev, "Setting type WINDOW 0x%x\n", type);
+ ret = find_closest_fast(hw_margin_min, &fastng, &min);
+ if (ret)
+ return ret;
+
+ ret = find_closest_slow_by_fast(min, &hw_margin, &slowng);
+ if (ret) {
+ dev_err(dev,
+ "can't support slow timeout %u uS using fast %u uS. [max slow %u uS]\n",
+ hw_margin * 100, min * 100, min * 100 * 16);
+
+ return ret;
+ }
+ w->wdt.min_hw_heartbeat_ms = min / 10;
+ } else {
+ type = BD96801_WD_TYPE_SLOW;
+ dev_dbg(dev, "Setting type SLOW 0x%x\n", type);
+ ret = find_closest_slow(&hw_margin, &slowng, &fastng);
+ if (ret)
+ return ret;
+ }
+
+ w->wdt.max_hw_heartbeat_ms = hw_margin / 10;
+
+ fastng = FIELD_PREP(BD96801_WD_TMO_SHORT_MASK, fastng);
+
+ reg = slowng | fastng;
+ mask = BD96801_WD_RATIO_MASK | BD96801_WD_TMO_SHORT_MASK;
+ ret = regmap_update_bits(w->regmap, BD96801_REG_WD_TMO,
+ mask, reg);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(w->regmap, BD96801_REG_WD_CONF,
+ BD96801_WD_TYPE_MASK, type);
+
+ return ret;
+}
+
+static int bd96801_set_heartbeat_from_hw(struct wdtbd96801 *w,
+ unsigned int conf_reg)
+{
+ int ret;
+ unsigned int val, sel, fast;
+
+ /*
+ * The BD96801 supports a somewhat peculiar QA-mode, which we do not
+ * support in this driver. If the QA-mode is enabled then we just
+ * warn and bail-out.
+ */
+ if ((conf_reg & BD96801_WD_EN_MASK) != BD96801_WD_IF_EN) {
+ dev_err(w->dev, "watchdog set to Q&A mode - exiting\n");
+ return -EINVAL;
+ }
+
+ ret = regmap_read(w->regmap, BD96801_REG_WD_TMO, &val);
+ if (ret)
+ return ret;
+
+ sel = FIELD_GET(BD96801_WD_TMO_SHORT_MASK, val);
+ fast = FASTNG_MIN << sel;
+
+ sel = (val & BD96801_WD_RATIO_MASK) + 1;
+ w->wdt.max_hw_heartbeat_ms = (fast << sel) / USEC_PER_MSEC;
+
+ if ((conf_reg & BD96801_WD_TYPE_MASK) == BD96801_WD_TYPE_WIN)
+ w->wdt.min_hw_heartbeat_ms = fast / USEC_PER_MSEC;
+
+ return 0;
+}
+
+static int init_wdg_hw(struct wdtbd96801 *w)
+{
+ u32 hw_margin[2];
+ int count, ret;
+ u32 hw_margin_max = BD96801_WDT_DEFAULT_MARGIN_MS, hw_margin_min = 0;
+
+ count = device_property_count_u32(w->dev->parent, "rohm,hw-timeout-ms");
+ if (count < 0 && count != -EINVAL)
+ return count;
+
+ if (count > 0) {
+ if (count > ARRAY_SIZE(hw_margin))
+ return -EINVAL;
+
+ ret = device_property_read_u32_array(w->dev->parent,
+ "rohm,hw-timeout-ms",
+ &hw_margin[0], count);
+ if (ret < 0)
+ return ret;
+
+ if (count == 1)
+ hw_margin_max = hw_margin[0];
+
+ if (count == 2) {
+ if (hw_margin[1] > hw_margin[0]) {
+ hw_margin_max = hw_margin[1];
+ hw_margin_min = hw_margin[0];
+ } else {
+ hw_margin_max = hw_margin[0];
+ hw_margin_min = hw_margin[1];
+ }
+ }
+ }
+
+ ret = bd96801_set_wdt_mode(w, hw_margin_max, hw_margin_min);
+ if (ret)
+ return ret;
+
+ ret = device_property_match_string(w->dev->parent, "rohm,wdg-action",
+ "prstb");
+ if (ret >= 0) {
+ ret = regmap_update_bits(w->regmap, BD96801_REG_WD_CONF,
+ BD96801_WD_ASSERT_MASK,
+ BD96801_WD_ASSERT_RST);
+ return ret;
+ }
+
+ ret = device_property_match_string(w->dev->parent, "rohm,wdg-action",
+ "intb-only");
+ if (ret >= 0) {
+ ret = regmap_update_bits(w->regmap, BD96801_REG_WD_CONF,
+ BD96801_WD_ASSERT_MASK,
+ BD96801_WD_ASSERT_IRQ);
+ return ret;
+ }
+
+ return 0;
+}
+
+static irqreturn_t bd96801_irq_hnd(int irq, void *data)
+{
+ emergency_restart();
+
+ return IRQ_NONE;
+}
+
+static int bd96801_wdt_probe(struct platform_device *pdev)
+{
+ struct wdtbd96801 *w;
+ int ret, irq;
+ unsigned int val;
+
+ w = devm_kzalloc(&pdev->dev, sizeof(*w), GFP_KERNEL);
+ if (!w)
+ return -ENOMEM;
+
+ w->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ w->dev = &pdev->dev;
+
+ w->wdt.info = &bd96801_wdt_info;
+ w->wdt.ops = &bd96801_wdt_ops;
+ w->wdt.parent = pdev->dev.parent;
+ w->wdt.timeout = DEFAULT_TIMEOUT;
+ watchdog_set_drvdata(&w->wdt, w);
+
+ ret = regmap_read(w->regmap, BD96801_REG_WD_CONF, &val);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "Failed to get the watchdog state\n");
+
+ /*
+ * If the WDG is already enabled we assume it is configured by boot.
+ * In this case we just update the hw-timeout based on values set to
+ * the timeout / mode registers and leave the hardware configs
+ * untouched.
+ */
+ if ((val & BD96801_WD_EN_MASK) != BD96801_WD_DISABLE) {
+ dev_dbg(&pdev->dev, "watchdog was running during probe\n");
+ ret = bd96801_set_heartbeat_from_hw(w, val);
+ if (ret)
+ return ret;
+
+ set_bit(WDOG_HW_RUNNING, &w->wdt.status);
+ } else {
+ /* If WDG is not running so we will initializate it */
+ ret = init_wdg_hw(w);
+ if (ret)
+ return ret;
+ }
+
+ dev_dbg(w->dev, "heartbeat set to %u - %u\n",
+ w->wdt.min_hw_heartbeat_ms, w->wdt.max_hw_heartbeat_ms);
+
+ watchdog_init_timeout(&w->wdt, 0, pdev->dev.parent);
+ watchdog_set_nowayout(&w->wdt, nowayout);
+ watchdog_stop_on_reboot(&w->wdt);
+
+ irq = platform_get_irq_byname(pdev, "bd96801-wdg");
+ if (irq > 0) {
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ bd96801_irq_hnd,
+ IRQF_ONESHOT, "bd96801-wdg",
+ NULL);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret,
+ "Failed to register IRQ\n");
+ }
+
+ return devm_watchdog_register_device(&pdev->dev, &w->wdt);
+}
+
+static const struct platform_device_id bd96801_wdt_id[] = {
+ { "bd96801-wdt", },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, bd96801_wdt_id);
+
+static struct platform_driver bd96801_wdt = {
+ .driver = {
+ .name = "bd96801-wdt"
+ },
+ .probe = bd96801_wdt_probe,
+ .id_table = bd96801_wdt_id,
+};
+module_platform_driver(bd96801_wdt);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("BD96801 watchdog driver");
+MODULE_LICENSE("GPL");
--
2.45.1
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH v5 6/6] MAINTAINERS: Add ROHM BD96801 'scalable PMIC' entries
2024-06-27 7:42 [PATCH v5 0/6] Support ROHM BD96801 Scalable PMIC Matti Vaittinen
` (4 preceding siblings ...)
2024-06-27 7:43 ` [PATCH v5 5/6] watchdog: ROHM BD96801 PMIC WDG driver Matti Vaittinen
@ 2024-06-27 7:44 ` Matti Vaittinen
2024-06-27 8:25 ` [PATCH v5 0/6] Support ROHM BD96801 Scalable PMIC Lee Jones
2024-06-28 14:34 ` [GIT PULL] Immutable branch between MFD, Regulator and Watchdog due for the v6.11 merge window Lee Jones
7 siblings, 0 replies; 9+ messages in thread
From: Matti Vaittinen @ 2024-06-27 7:44 UTC (permalink / raw)
To: Matti Vaittinen, Matti Vaittinen
Cc: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Liam Girdwood, Mark Brown, Matti Vaittinen, Wim Van Sebroeck,
Guenter Roeck, devicetree, linux-kernel, linux-watchdog
[-- Attachment #1: Type: text/plain, Size: 1560 bytes --]
Add maintainer entries for ROHM BD96801 a.k.a 'scalable PMIC'
drivers to be reviewed by ROHM people.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
---
Revision history:
RFC1 =>:
- No changes
---
MAINTAINERS | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index d6c90161c7bf..dc79a45c763e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19446,17 +19446,21 @@ F: drivers/gpio/gpio-bd71828.c
F: drivers/mfd/rohm-bd71828.c
F: drivers/mfd/rohm-bd718x7.c
F: drivers/mfd/rohm-bd9576.c
+F: drivers/mfd/rohm-bd96801.c
F: drivers/regulator/bd71815-regulator.c
F: drivers/regulator/bd71828-regulator.c
F: drivers/regulator/bd718x7-regulator.c
F: drivers/regulator/bd9576-regulator.c
+F: drivers/regulator/bd96801-regulator.c
F: drivers/regulator/rohm-regulator.c
F: drivers/rtc/rtc-bd70528.c
F: drivers/watchdog/bd9576_wdt.c
+F: drivers/watchdog/bd96801_wdt.c
F: include/linux/mfd/rohm-bd71815.h
F: include/linux/mfd/rohm-bd71828.h
F: include/linux/mfd/rohm-bd718x7.h
F: include/linux/mfd/rohm-bd957x.h
+F: include/linux/mfd/rohm-bd96801.h
F: include/linux/mfd/rohm-generic.h
F: include/linux/mfd/rohm-shared.h
--
2.45.1
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH v5 0/6] Support ROHM BD96801 Scalable PMIC
2024-06-27 7:42 [PATCH v5 0/6] Support ROHM BD96801 Scalable PMIC Matti Vaittinen
` (5 preceding siblings ...)
2024-06-27 7:44 ` [PATCH v5 6/6] MAINTAINERS: Add ROHM BD96801 'scalable PMIC' entries Matti Vaittinen
@ 2024-06-27 8:25 ` Lee Jones
2024-06-28 14:34 ` [GIT PULL] Immutable branch between MFD, Regulator and Watchdog due for the v6.11 merge window Lee Jones
7 siblings, 0 replies; 9+ messages in thread
From: Lee Jones @ 2024-06-27 8:25 UTC (permalink / raw)
To: Matti Vaittinen
Cc: Matti Vaittinen, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Liam Girdwood, Mark Brown, Greg Kroah-Hartman, Rafael J. Wysocki,
Wim Van Sebroeck, Guenter Roeck, devicetree, linux-kernel,
linux-watchdog
On Thu, 27 Jun 2024, Matti Vaittinen wrote:
> Support ROHM BD96801 Scalable PMIC
>
> The ROHM BD96801 is automotive grade PMIC, intended to be usable in
> multiple solutions. The BD96801 can be used as a stand-alone, or together
> with separate 'companion PMICs'. This modular approach aims to make this
> PMIC suitable for various use-cases.
>
> This series brings only limited support. The more complete set of
> features was sent in the RFC:
> https://lore.kernel.org/lkml/cover.1712058690.git.mazziesaccount@gmail.com/
>
> The v3: implemented also support for ERRB interrupt and setting a name
> suffix to IRQ domains. That work was postponed and will be continued
> after some unrelated changes to irqdomain code are completed as
> discussed here:
> https://lore.kernel.org/all/87plst28yk.ffs@tglx/
>
> Revision history still tries to summarize changes from the RFC for the
> reviewers.
>
> Revision history:
> v4 => v5:
> - Drop unintended Makefile change from regulator Makefile
>
> v3 => v4:
> - Drop patches 7 to 10 (inclusive) until preparatory irqdomain changes
> are done.
> - Cleanups as suggested by Lee.
> - Change the regulator subdevice name. (MFD and regulators).
> - Minor styling in MFD driver
>
> v2 => v3: Mostly based on feedback from Thomas Gleixner
> - Added acks from Krzysztof and Mark
> - Rebased on v6.10-rc2
> - Drop name suffix support for legacy IRQ domains (both
> irqdomain and regmap)
> - Improve the commit message for patch 7/10
>
> v1 => v2:
> - Add support for setting a name suffix for fwnode backed IRQ domains.
> - Add support for setting a domain name suffix for regmap-IRQ.
> - Add handling of ERRB IRQs.
> - Small fixes based on feedback.
>
> RFCv2 => v1:
> - Drop ERRB IRQ from drivers (but not DT bindings).
> - Drop configuration which requires STBY - state.
> - Fix the register lock race by moving it from the regulator
> driver to the MFD driver.
>
> RFCv1 => RFCv2:
> - Tidying code based on feedback form Krzysztof Kozlowski and
> Lee Jones.
> - Documented undocumented watchdog related DT properties.
> - Added usage of the watchdog IRQ.
> - Use irq_domain_update_bus_token() to work-around debugFS name
> collision for IRQ domains.
>
> ---
>
>
> Matti Vaittinen (6):
> dt-bindings: ROHM BD96801 PMIC regulators
> dt-bindings: mfd: bd96801 PMIC core
> mfd: support ROHM BD96801 PMIC core
> regulator: bd96801: ROHM BD96801 PMIC regulators
> watchdog: ROHM BD96801 PMIC WDG driver
> MAINTAINERS: Add ROHM BD96801 'scalable PMIC' entries
>
> .../bindings/mfd/rohm,bd96801-pmic.yaml | 173 ++++
> .../regulator/rohm,bd96801-regulator.yaml | 63 ++
> MAINTAINERS | 4 +
> drivers/mfd/Kconfig | 13 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/rohm-bd96801.c | 273 ++++++
> drivers/regulator/Kconfig | 12 +
> drivers/regulator/Makefile | 1 +
> drivers/regulator/bd96801-regulator.c | 908 ++++++++++++++++++
> drivers/watchdog/Kconfig | 13 +
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/bd96801_wdt.c | 416 ++++++++
> include/linux/mfd/rohm-bd96801.h | 215 +++++
> include/linux/mfd/rohm-generic.h | 1 +
> 14 files changed, 2094 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml
> create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml
> create mode 100644 drivers/mfd/rohm-bd96801.c
> create mode 100644 drivers/regulator/bd96801-regulator.c
> create mode 100644 drivers/watchdog/bd96801_wdt.c
> create mode 100644 include/linux/mfd/rohm-bd96801.h
Applied and submitted for build testing.
If all is good, I'll follow-up with a PR for the other maintainers.
Note to self: ib-mfd-regulator-watchdog-6.11
--
Lee Jones [李琼斯]
^ permalink raw reply [flat|nested] 9+ messages in thread* [GIT PULL] Immutable branch between MFD, Regulator and Watchdog due for the v6.11 merge window
2024-06-27 7:42 [PATCH v5 0/6] Support ROHM BD96801 Scalable PMIC Matti Vaittinen
` (6 preceding siblings ...)
2024-06-27 8:25 ` [PATCH v5 0/6] Support ROHM BD96801 Scalable PMIC Lee Jones
@ 2024-06-28 14:34 ` Lee Jones
7 siblings, 0 replies; 9+ messages in thread
From: Lee Jones @ 2024-06-28 14:34 UTC (permalink / raw)
To: Matti Vaittinen
Cc: Matti Vaittinen, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Liam Girdwood, Mark Brown, Greg Kroah-Hartman, Rafael J. Wysocki,
Wim Van Sebroeck, Guenter Roeck, devicetree, linux-kernel,
linux-watchdog
Enjoy!
The following changes since commit 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0:
Linux 6.10-rc1 (2024-05-26 15:20:12 -0700)
are available in the Git repository at:
ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/ib-mfd-regulator-watchdog-v6.11
for you to fetch changes up to fcf1f960a6aa45a22efd4d49114c672ed305b85f:
MAINTAINERS: Add ROHM BD96801 'scalable PMIC' entries (2024-06-27 09:24:45 +0100)
----------------------------------------------------------------
Immutable branch between MFD, Regulator and Watchdog due for the v6.11 merge window
----------------------------------------------------------------
Matti Vaittinen (6):
dt-bindings: ROHM BD96801 PMIC regulators
dt-bindings: mfd: bd96801 PMIC core
mfd: support ROHM BD96801 PMIC core
regulator: bd96801: ROHM BD96801 PMIC regulators
watchdog: ROHM BD96801 PMIC WDG driver
MAINTAINERS: Add ROHM BD96801 'scalable PMIC' entries
.../devicetree/bindings/mfd/rohm,bd96801-pmic.yaml | 173 ++++
.../bindings/regulator/rohm,bd96801-regulator.yaml | 63 ++
MAINTAINERS | 4 +
drivers/mfd/Kconfig | 13 +
drivers/mfd/Makefile | 1 +
drivers/mfd/rohm-bd96801.c | 273 +++++++
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/bd96801-regulator.c | 908 +++++++++++++++++++++
drivers/watchdog/Kconfig | 13 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/bd96801_wdt.c | 416 ++++++++++
include/linux/mfd/rohm-bd96801.h | 215 +++++
include/linux/mfd/rohm-generic.h | 1 +
14 files changed, 2094 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd96801-regulator.yaml
create mode 100644 drivers/mfd/rohm-bd96801.c
create mode 100644 drivers/regulator/bd96801-regulator.c
create mode 100644 drivers/watchdog/bd96801_wdt.c
create mode 100644 include/linux/mfd/rohm-bd96801.h
--
Lee Jones [李琼斯]
^ permalink raw reply [flat|nested] 9+ messages in thread