[PATCH v2 0/2] serial: 8250: move mmp|pxa uart earlycon code and add xscale earlycon

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH v2 0/2] serial: 8250: move mmp|pxa uart earlycon code and add xscale earlycon
@ 2024-07-11 16:07 ` Jisheng Zhang
  0 siblings, 0 replies; 8+ messages in thread
From: Jisheng Zhang @ 2024-07-11 16:07 UTC (permalink / raw)
  To: Greg Kroah-Hartman, Jiri Slaby; +Cc: linux-kernel, linux-serial, linux-riscv

There are two other drivers that bind to "mrvl,mmp-uart": the 8250_of
and the 8250_pxa. The previous one is generic and the latter is binded
to ARCH_PXA || ARCH_MMP. Now we may have pxa programming compatible
HW to support, making use of the generic 8250_of seems a good idea.
However, there's no earlycon support if we go with this solution. So
move the mmp|pxa-uart earlycon code to core 8250_early.c.

patch2 adds xscale earlycon support too, only build test since
I have no xscale machine any more.

Since v1:
  - split the patch into two as suggested by Greg

Jisheng Zhang (2):
  serial: 8250: move mmp|pxa uart earlycon code
  serial: 8250_early: add xscale earlycon support

 drivers/tty/serial/8250/8250_early.c | 11 +++++++++++
 drivers/tty/serial/8250/8250_pxa.c   | 16 ----------------
 2 files changed, 11 insertions(+), 16 deletions(-)

-- 
2.43.0

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 0/2] serial: 8250: move mmp|pxa uart earlycon code and add xscale earlycon
@ 2024-07-11 16:07 ` Jisheng Zhang
  0 siblings, 0 replies; 8+ messages in thread
From: Jisheng Zhang @ 2024-07-11 16:07 UTC (permalink / raw)
  To: Greg Kroah-Hartman, Jiri Slaby; +Cc: linux-kernel, linux-serial, linux-riscv

There are two other drivers that bind to "mrvl,mmp-uart": the 8250_of
and the 8250_pxa. The previous one is generic and the latter is binded
to ARCH_PXA || ARCH_MMP. Now we may have pxa programming compatible
HW to support, making use of the generic 8250_of seems a good idea.
However, there's no earlycon support if we go with this solution. So
move the mmp|pxa-uart earlycon code to core 8250_early.c.

patch2 adds xscale earlycon support too, only build test since
I have no xscale machine any more.

Since v1:
  - split the patch into two as suggested by Greg

Jisheng Zhang (2):
  serial: 8250: move mmp|pxa uart earlycon code
  serial: 8250_early: add xscale earlycon support

 drivers/tty/serial/8250/8250_early.c | 11 +++++++++++
 drivers/tty/serial/8250/8250_pxa.c   | 16 ----------------
 2 files changed, 11 insertions(+), 16 deletions(-)

-- 
2.43.0

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH v2 1/2] serial: 8250: move mmp|pxa uart earlycon code
  2024-07-11 16:07 ` Jisheng Zhang
@ 2024-07-11 16:07   ` Jisheng Zhang
  -1 siblings, 0 replies; 8+ messages in thread
From: Jisheng Zhang @ 2024-07-11 16:07 UTC (permalink / raw)
  To: Greg Kroah-Hartman, Jiri Slaby; +Cc: linux-kernel, linux-serial, linux-riscv

There are two other drivers that bind to "mrvl,mmp-uart": the 8250_of
and the 8250_pxa. The previous one is generic and the latter is binded
to ARCH_PXA || ARCH_MMP. Now we may have pxa programming compatible
HW to support, making use of the generic 8250_of seems a good idea.
However, there's no earlycon support if we go with this solution. So
move the mmp|pxa-uart earlycon code to core 8250_early.c.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
 drivers/tty/serial/8250/8250_early.c | 10 ++++++++++
 drivers/tty/serial/8250/8250_pxa.c   | 16 ----------------
 2 files changed, 10 insertions(+), 16 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index e3f482fd3de4..2ab61d6673d2 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -171,6 +171,16 @@ OF_EARLYCON_DECLARE(ns16550a, "ns16550a", early_serial8250_setup);
 OF_EARLYCON_DECLARE(uart, "nvidia,tegra20-uart", early_serial8250_setup);
 OF_EARLYCON_DECLARE(uart, "snps,dw-apb-uart", early_serial8250_setup);
 
+static int __init early_serial8250_rs2_setup(struct earlycon_device *device,
+					     const char *options)
+{
+	device->port.regshift = 2;
+
+	return early_serial8250_setup(device, options);
+}
+OF_EARLYCON_DECLARE(uart, "mrvl,mmp-uart", early_serial8250_rs2_setup);
+OF_EARLYCON_DECLARE(uart, "mrvl,pxa-uart", early_serial8250_rs2_setup);
+
 #ifdef CONFIG_SERIAL_8250_OMAP
 
 static int __init early_omap8250_setup(struct earlycon_device *device,
diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c
index ba96fa913e7f..b5d937f6f3f9 100644
--- a/drivers/tty/serial/8250/8250_pxa.c
+++ b/drivers/tty/serial/8250/8250_pxa.c
@@ -165,22 +165,6 @@ static struct platform_driver serial_pxa_driver = {
 
 module_platform_driver(serial_pxa_driver);
 
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init early_serial_pxa_setup(struct earlycon_device *device,
-				  const char *options)
-{
-	struct uart_port *port = &device->port;
-
-	if (!(device->port.membase || device->port.iobase))
-		return -ENODEV;
-
-	port->regshift = 2;
-	return early_serial8250_setup(device, NULL);
-}
-OF_EARLYCON_DECLARE(early_pxa, "mrvl,pxa-uart", early_serial_pxa_setup);
-OF_EARLYCON_DECLARE(mmp, "mrvl,mmp-uart", early_serial_pxa_setup);
-#endif
-
 MODULE_AUTHOR("Sergei Ianovich");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:pxa2xx-uart");
-- 
2.43.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH v2 1/2] serial: 8250: move mmp|pxa uart earlycon code
@ 2024-07-11 16:07   ` Jisheng Zhang
  0 siblings, 0 replies; 8+ messages in thread
From: Jisheng Zhang @ 2024-07-11 16:07 UTC (permalink / raw)
  To: Greg Kroah-Hartman, Jiri Slaby; +Cc: linux-kernel, linux-serial, linux-riscv

There are two other drivers that bind to "mrvl,mmp-uart": the 8250_of
and the 8250_pxa. The previous one is generic and the latter is binded
to ARCH_PXA || ARCH_MMP. Now we may have pxa programming compatible
HW to support, making use of the generic 8250_of seems a good idea.
However, there's no earlycon support if we go with this solution. So
move the mmp|pxa-uart earlycon code to core 8250_early.c.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
 drivers/tty/serial/8250/8250_early.c | 10 ++++++++++
 drivers/tty/serial/8250/8250_pxa.c   | 16 ----------------
 2 files changed, 10 insertions(+), 16 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index e3f482fd3de4..2ab61d6673d2 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -171,6 +171,16 @@ OF_EARLYCON_DECLARE(ns16550a, "ns16550a", early_serial8250_setup);
 OF_EARLYCON_DECLARE(uart, "nvidia,tegra20-uart", early_serial8250_setup);
 OF_EARLYCON_DECLARE(uart, "snps,dw-apb-uart", early_serial8250_setup);
 
+static int __init early_serial8250_rs2_setup(struct earlycon_device *device,
+					     const char *options)
+{
+	device->port.regshift = 2;
+
+	return early_serial8250_setup(device, options);
+}
+OF_EARLYCON_DECLARE(uart, "mrvl,mmp-uart", early_serial8250_rs2_setup);
+OF_EARLYCON_DECLARE(uart, "mrvl,pxa-uart", early_serial8250_rs2_setup);
+
 #ifdef CONFIG_SERIAL_8250_OMAP
 
 static int __init early_omap8250_setup(struct earlycon_device *device,
diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c
index ba96fa913e7f..b5d937f6f3f9 100644
--- a/drivers/tty/serial/8250/8250_pxa.c
+++ b/drivers/tty/serial/8250/8250_pxa.c
@@ -165,22 +165,6 @@ static struct platform_driver serial_pxa_driver = {
 
 module_platform_driver(serial_pxa_driver);
 
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init early_serial_pxa_setup(struct earlycon_device *device,
-				  const char *options)
-{
-	struct uart_port *port = &device->port;
-
-	if (!(device->port.membase || device->port.iobase))
-		return -ENODEV;
-
-	port->regshift = 2;
-	return early_serial8250_setup(device, NULL);
-}
-OF_EARLYCON_DECLARE(early_pxa, "mrvl,pxa-uart", early_serial_pxa_setup);
-OF_EARLYCON_DECLARE(mmp, "mrvl,mmp-uart", early_serial_pxa_setup);
-#endif
-
 MODULE_AUTHOR("Sergei Ianovich");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:pxa2xx-uart");
-- 
2.43.0


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH v2 2/2] serial: 8250_early: add xscale earlycon support
  2024-07-11 16:07 ` Jisheng Zhang
@ 2024-07-11 16:07   ` Jisheng Zhang
  -1 siblings, 0 replies; 8+ messages in thread
From: Jisheng Zhang @ 2024-07-11 16:07 UTC (permalink / raw)
  To: Greg Kroah-Hartman, Jiri Slaby; +Cc: linux-kernel, linux-serial, linux-riscv

After commit 3a50365d8c79 ("serial: 8250: Add OF support for Xscale
variant"), 8250_of can support the xscale variant. Now, let's add
the earlycon support for xscale too.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
 drivers/tty/serial/8250/8250_early.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index 2ab61d6673d2..6176083d0341 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -178,6 +178,7 @@ static int __init early_serial8250_rs2_setup(struct earlycon_device *device,
 
 	return early_serial8250_setup(device, options);
 }
+OF_EARLYCON_DECLARE(uart, "intel,xscale-uart", early_serial8250_rs2_setup);
 OF_EARLYCON_DECLARE(uart, "mrvl,mmp-uart", early_serial8250_rs2_setup);
 OF_EARLYCON_DECLARE(uart, "mrvl,pxa-uart", early_serial8250_rs2_setup);
 
-- 
2.43.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH v2 2/2] serial: 8250_early: add xscale earlycon support
@ 2024-07-11 16:07   ` Jisheng Zhang
  0 siblings, 0 replies; 8+ messages in thread
From: Jisheng Zhang @ 2024-07-11 16:07 UTC (permalink / raw)
  To: Greg Kroah-Hartman, Jiri Slaby; +Cc: linux-kernel, linux-serial, linux-riscv

After commit 3a50365d8c79 ("serial: 8250: Add OF support for Xscale
variant"), 8250_of can support the xscale variant. Now, let's add
the earlycon support for xscale too.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
 drivers/tty/serial/8250/8250_early.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index 2ab61d6673d2..6176083d0341 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -178,6 +178,7 @@ static int __init early_serial8250_rs2_setup(struct earlycon_device *device,
 
 	return early_serial8250_setup(device, options);
 }
+OF_EARLYCON_DECLARE(uart, "intel,xscale-uart", early_serial8250_rs2_setup);
 OF_EARLYCON_DECLARE(uart, "mrvl,mmp-uart", early_serial8250_rs2_setup);
 OF_EARLYCON_DECLARE(uart, "mrvl,pxa-uart", early_serial8250_rs2_setup);
 
-- 
2.43.0


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 0/2] serial: 8250: move mmp|pxa uart earlycon code and add xscale earlycon
  2024-07-11 16:07 ` Jisheng Zhang
@ 2025-01-21 20:54   ` Yixun Lan
  -1 siblings, 0 replies; 8+ messages in thread
From: Yixun Lan @ 2025-01-21 20:54 UTC (permalink / raw)
  To: Jisheng Zhang
  Cc: Greg Kroah-Hartman, Jiri Slaby, linux-kernel, linux-serial,
	linux-riscv

Hi Greg, Jisheng:

how is this patch going, hope it isn't lost..
generally this patch looks good.

On 00:07 Fri 12 Jul     , Jisheng Zhang wrote:
> There are two other drivers that bind to "mrvl,mmp-uart": the 8250_of
> and the 8250_pxa. The previous one is generic and the latter is binded
> to ARCH_PXA || ARCH_MMP. Now we may have pxa programming compatible
> HW to support, making use of the generic 8250_of seems a good idea.
> However, there's no earlycon support if we go with this solution. So
> move the mmp|pxa-uart earlycon code to core 8250_early.c.
> 
> patch2 adds xscale earlycon support too, only build test since
> I have no xscale machine any more.
> 
> Since v1:
>   - split the patch into two as suggested by Greg
> 
> Jisheng Zhang (2):
>   serial: 8250: move mmp|pxa uart earlycon code
>   serial: 8250_early: add xscale earlycon support
> 
>  drivers/tty/serial/8250/8250_early.c | 11 +++++++++++
>  drivers/tty/serial/8250/8250_pxa.c   | 16 ----------------
>  2 files changed, 11 insertions(+), 16 deletions(-)
> 
> -- 
> 2.43.0
> 
Reviewed-by: Yixun Lan <dlan@gentoo.org>
-- 
Yixun Lan (dlan)
Gentoo Linux Developer
GPG Key ID AABEFD55

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2 0/2] serial: 8250: move mmp|pxa uart earlycon code and add xscale earlycon
@ 2025-01-21 20:54   ` Yixun Lan
  0 siblings, 0 replies; 8+ messages in thread
From: Yixun Lan @ 2025-01-21 20:54 UTC (permalink / raw)
  To: Jisheng Zhang
  Cc: Greg Kroah-Hartman, Jiri Slaby, linux-kernel, linux-serial,
	linux-riscv

Hi Greg, Jisheng:

how is this patch going, hope it isn't lost..
generally this patch looks good.

On 00:07 Fri 12 Jul     , Jisheng Zhang wrote:
> There are two other drivers that bind to "mrvl,mmp-uart": the 8250_of
> and the 8250_pxa. The previous one is generic and the latter is binded
> to ARCH_PXA || ARCH_MMP. Now we may have pxa programming compatible
> HW to support, making use of the generic 8250_of seems a good idea.
> However, there's no earlycon support if we go with this solution. So
> move the mmp|pxa-uart earlycon code to core 8250_early.c.
> 
> patch2 adds xscale earlycon support too, only build test since
> I have no xscale machine any more.
> 
> Since v1:
>   - split the patch into two as suggested by Greg
> 
> Jisheng Zhang (2):
>   serial: 8250: move mmp|pxa uart earlycon code
>   serial: 8250_early: add xscale earlycon support
> 
>  drivers/tty/serial/8250/8250_early.c | 11 +++++++++++
>  drivers/tty/serial/8250/8250_pxa.c   | 16 ----------------
>  2 files changed, 11 insertions(+), 16 deletions(-)
> 
> -- 
> 2.43.0
> 
Reviewed-by: Yixun Lan <dlan@gentoo.org>
-- 
Yixun Lan (dlan)
Gentoo Linux Developer
GPG Key ID AABEFD55

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2025-01-21 20:54 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-07-11 16:07 [PATCH v2 0/2] serial: 8250: move mmp|pxa uart earlycon code and add xscale earlycon Jisheng Zhang
2024-07-11 16:07 ` Jisheng Zhang
2024-07-11 16:07 ` [PATCH v2 1/2] serial: 8250: move mmp|pxa uart earlycon code Jisheng Zhang
2024-07-11 16:07   ` Jisheng Zhang
2024-07-11 16:07 ` [PATCH v2 2/2] serial: 8250_early: add xscale earlycon support Jisheng Zhang
2024-07-11 16:07   ` Jisheng Zhang
2025-01-21 20:54 ` [PATCH v2 0/2] serial: 8250: move mmp|pxa uart earlycon code and add xscale earlycon Yixun Lan
2025-01-21 20:54   ` Yixun Lan

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.