* [Buildroot] [PATCH 3/5] configs/beaglev_defconfig: remove defconfig
2024-07-13 14:01 [Buildroot] [PATCH 1/5] configs/beagleboneai_defconfig: move board files to board/beagleboard/beagleboneai Romain Naour via buildroot
2024-07-13 14:01 ` [Buildroot] [PATCH 2/5] configs/beaglebone{_qt5}_defconfig: move board files to board/beagleboard/beaglebone Romain Naour via buildroot
@ 2024-07-13 14:01 ` Romain Naour via buildroot
2024-07-13 14:01 ` [Buildroot] [PATCH 4/5] boot/beaglev-secondboot: remove package Romain Naour via buildroot
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Romain Naour via buildroot @ 2024-07-13 14:01 UTC (permalink / raw)
To: buildroot; +Cc: Romain Naour, Thomas Petazzoni
The beaglev_defconfig was meant for BeagleV-Starlight prototype waiting
for the arrival of the official revision. But BeagleV-Starlight was
never produced [1].
BeagleV-Starlight is nowadays superseded by the Beaglev-Ahead board [2].
[1] https://forum.beagleboard.org/t/the-future-of-beaglev-community/30463
[2] https://www.beagleboard.org/boards/beaglev-ahead
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
.checkpackageignore | 2 -
DEVELOPERS | 2 -
board/beaglev/extlinux.conf | 4 -
board/beaglev/genimage.cfg | 12 --
...iscv-Fix-build-against-binutils-2.38.patch | 58 --------
board/beaglev/post-build.sh | 11 --
board/beaglev/readme.txt | 124 ------------------
configs/beaglev_defconfig | 43 ------
8 files changed, 256 deletions(-)
delete mode 100644 board/beaglev/extlinux.conf
delete mode 100644 board/beaglev/genimage.cfg
delete mode 100644 board/beaglev/patches/uboot/0001-riscv-Fix-build-against-binutils-2.38.patch
delete mode 100755 board/beaglev/post-build.sh
delete mode 100644 board/beaglev/readme.txt
delete mode 100644 configs/beaglev_defconfig
diff --git a/.checkpackageignore b/.checkpackageignore
index b49d8d92b4..1052a6f90f 100644
--- a/.checkpackageignore
+++ b/.checkpackageignore
@@ -12,7 +12,6 @@ board/beagleboard/beaglebone/patches/linux/0001-keep-jtag-clock-alive-for-debugg
board/beagleboard/beaglebone/post-build.sh Shellcheck
board/beagleboard/beagleboneai/patches/uboot/0001-am57xx_evm-fixes.patch lib_patch.Upstream
board/beagleboard/beagleboneai/post-build.sh Shellcheck
-board/beaglev/post-build.sh Shellcheck
board/beelink/gs1/post-build.sh Shellcheck
board/boundarydevices/common/post-build.sh Shellcheck
board/boundarydevices/common/post-image.sh Shellcheck
@@ -143,7 +142,6 @@ configs/bananapi_m2_ultra_defconfig lib_defconfig.ForceCheckHash
configs/bananapi_m2_zero_defconfig lib_defconfig.ForceCheckHash
configs/bananapro_defconfig lib_defconfig.ForceCheckHash
configs/beaglebone_defconfig lib_defconfig.ForceCheckHash
-configs/beaglev_defconfig lib_defconfig.ForceCheckHash
configs/beelink_gs1_defconfig lib_defconfig.ForceCheckHash
configs/broadcom_northstar_defconfig lib_defconfig.ForceCheckHash
configs/canaan_kd233_defconfig lib_defconfig.ForceCheckHash
diff --git a/DEVELOPERS b/DEVELOPERS
index 806c01e2a8..181e5ef174 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -3067,13 +3067,11 @@ F: package/go/
N: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
F: arch/Config.in.arm
-F: board/beaglev/
F: board/stmicroelectronics/stm32mp157c-dk2/
F: boot/beaglev-ddrinit/
F: boot/beaglev-secondboot/
F: boot/boot-wrapper-aarch64/
F: boot/grub2/
-F: configs/beaglev_defconfig
F: configs/stm32mp157c_dk2_defconfig
F: package/android-tools/
F: package/b43-firmware/
diff --git a/board/beaglev/extlinux.conf b/board/beaglev/extlinux.conf
deleted file mode 100644
index 9daf6a7581..0000000000
--- a/board/beaglev/extlinux.conf
+++ /dev/null
@@ -1,4 +0,0 @@
-label linux
- kernel /boot/Image
- devicetree /boot/jh7100-beaglev-starlight.dtb
- append console=ttyS0,115200 earlyprintk root=PARTUUID=0fef845a-c6e1-45bc-82f7-002fa720f958 rootwait
diff --git a/board/beaglev/genimage.cfg b/board/beaglev/genimage.cfg
deleted file mode 100644
index deefdbc110..0000000000
--- a/board/beaglev/genimage.cfg
+++ /dev/null
@@ -1,12 +0,0 @@
-image sdcard.img {
- hdimage {
- partition-table-type = "gpt"
- }
-
- partition rootfs {
- partition-type-uuid = 72ec70a6-cf74-40e6-bd49-4bda08e8f224
- partition-uuid = 0fef845a-c6e1-45bc-82f7-002fa720f958
- bootable = "true"
- image = "rootfs.ext4"
- }
-}
diff --git a/board/beaglev/patches/uboot/0001-riscv-Fix-build-against-binutils-2.38.patch b/board/beaglev/patches/uboot/0001-riscv-Fix-build-against-binutils-2.38.patch
deleted file mode 100644
index 52b496f054..0000000000
--- a/board/beaglev/patches/uboot/0001-riscv-Fix-build-against-binutils-2.38.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 0cf11f3c0478f4286adcfb09bf9137f8b00212e3 Mon Sep 17 00:00:00 2001
-From: Alexandre Ghiti <alexandre.ghiti@canonical.com>
-Date: Mon, 3 Oct 2022 18:07:54 +0200
-Subject: [PATCH] riscv: Fix build against binutils 2.38
-
-The following description is copied from the equivalent patch for the
-Linux Kernel proposed by Aurelien Jarno:
-
->From version 2.38, binutils default to ISA spec version 20191213. This
-means that the csr read/write (csrr*/csrw*) instructions and fence.i
-instruction has separated from the `I` extension, become two standalone
-extensions: Zicsr and Zifencei. As the kernel uses those instruction,
-this causes the following build failure:
-
-arch/riscv/cpu/mtrap.S: Assembler messages:
-arch/riscv/cpu/mtrap.S:65: Error: unrecognized opcode `csrr a0,scause'
-arch/riscv/cpu/mtrap.S:66: Error: unrecognized opcode `csrr a1,sepc'
-arch/riscv/cpu/mtrap.S:67: Error: unrecognized opcode `csrr a2,stval'
-arch/riscv/cpu/mtrap.S:70: Error: unrecognized opcode `csrw sepc,a0'
-
-Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
-Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
-Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
-Tested-by: Heiko Stuebner <heiko@sntech.de>
-Tested-by: Christian Stewart <christian@paral.in>
-Reviewed-by: Rick Chen <rick@andestech.com>
-(cherry picked from commit 1dde977518f13824b847e23275001191139bc384)
-Upstream: https://gitlab.com/u-boot/u-boot/-/commit/1dde977518f13824b847e23275001191139bc384
-Signed-off-by: Romain Naour <romain.naour@gmail.com>
----
- arch/riscv/Makefile | 11 ++++++++++-
- 1 file changed, 10 insertions(+), 1 deletion(-)
-
-diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
-index 0b80eb8d864..53d1194ffb6 100644
---- a/arch/riscv/Makefile
-+++ b/arch/riscv/Makefile
-@@ -24,7 +24,16 @@ ifeq ($(CONFIG_CMODEL_MEDANY),y)
- CMODEL = medany
- endif
-
--ARCH_FLAGS = -march=$(ARCH_BASE)$(ARCH_A)$(ARCH_C) -mabi=$(ABI) \
-+RISCV_MARCH = $(ARCH_BASE)$(ARCH_A)$(ARCH_C)
-+
-+# Newer binutils versions default to ISA spec version 20191213 which moves some
-+# instructions from the I extension to the Zicsr and Zifencei extensions.
-+toolchain-need-zicsr-zifencei := $(call cc-option-yn, -mabi=$(ABI) -march=$(RISCV_MARCH)_zicsr_zifencei)
-+ifeq ($(toolchain-need-zicsr-zifencei),y)
-+ RISCV_MARCH := $(RISCV_MARCH)_zicsr_zifencei
-+endif
-+
-+ARCH_FLAGS = -march=$(RISCV_MARCH) -mabi=$(ABI) \
- -mcmodel=$(CMODEL)
-
- PLATFORM_CPPFLAGS += $(ARCH_FLAGS)
---
-2.41.0
-
diff --git a/board/beaglev/post-build.sh b/board/beaglev/post-build.sh
deleted file mode 100755
index fe61fd33cc..0000000000
--- a/board/beaglev/post-build.sh
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/sh
-BOARD_DIR=$(dirname $0)
-
-# Bring the extlinux.conf file in.
-install -D -m 0644 ${BOARD_DIR}/extlinux.conf \
- ${TARGET_DIR}/boot/extlinux/extlinux.conf
-
-# To be reflashed through Xmodem, the bootloader needs to be prepended
-# with a 4-byte header that contains the total size of the file.
-perl -e 'print pack("l", (stat @ARGV[0])[7])' ${BINARIES_DIR}/fw_payload.bin > ${BINARIES_DIR}/fw_payload.bin.out
-cat ${BINARIES_DIR}/fw_payload.bin >> ${BINARIES_DIR}/fw_payload.bin.out
diff --git a/board/beaglev/readme.txt b/board/beaglev/readme.txt
deleted file mode 100644
index 472d6b1cf1..0000000000
--- a/board/beaglev/readme.txt
+++ /dev/null
@@ -1,124 +0,0 @@
-BeagleV
-=======
-
-BeagleV is a low-cost RISC-V 64-bit based platform, powered by a
-Starfive JH7100 processor. The current defconfig in Buildroot has been
-tested with the JH7100 chip used on the beta version of the BeagleV
-board.
-
-How to build
-============
-
-$ make beaglev_defconfig
-$ make
-
-Build results
-=============
-
-After building, output/images contains:
-
-+ bootloader-JH7100-buildroot.bin.out
-+ ddrinit-2133-buildroot.bin.out
-+ Image
-+ fw_payload.bin
-+ fw_payload.bin.out
-+ fw_payload.elf
-+ rootfs.ext2
-+ rootfs.ext4
-+ sdcard.img
-+ u-boot.bin
-
-The four important files are:
-
- - bootloader-JH7100-buildroot.bin.out, the first stage bootloader
-
- - ddrinit-2133-buildroot.bin.out, the DDR initialization firmware
-
- - fw_payload.bin.out, which is the bootloader image, containing
- both OpenSBI and U-Boot.
-
- - sdcard.img, the SD card image, which contains the root filesystem,
- kernel image and Device Tree.
-
-Flashing the SD card image
-==========================
-
-$ sudo dd if=output/images/sdcard.img of=/dev/sdX
-
-Preparing the board
-===================
-
-Connect the Beagle-V fan to the 5V supply (pin 2 or 4 of the GPIO
-connector) and GND (pin 6 of the GPIO connector).
-
-Connect a TTL UART cable to pin 8 (TX), 10 (RX) and 14 (GND).
-
-Insert your SD card.
-
-Power-up the board using an USB-C cable.
-
-Flashing OpenSBI/U-Boot
-=======================
-
-The bootloader pre-flashed on the Beagle-V has a non-working
-fdt_addr_r environment variable value, so it won't work
-as-is. Reflashing the bootloader with the bootloader image produced by
-Buildroot is necessary.
-
-When the board starts up, a pre-loader shows a count down of 2
-seconds, interrupt by pressing any key. You should reach a menu like
-this:
-
---------8<----------
-
-bootloader version:210209-4547a8d
-ddr 0x00000000, 1M test
-ddr 0x00100000, 2M test
-DDR clk 2133M,Version: 210302-5aea32f
-0
-***************************************************
-*************** FLASH PROGRAMMING *****************
-***************************************************
-
-0:update uboot
-1:quit
-select the function:
-
---------8<----------
-
-Press 0 and Enter. You will now see "C" characters being
-displayed. Ask your serial port communication program to send
-fw_payload.bin.out using the Xmodem protocol.
-
-After reflashing is complete, restart the board, it will automatically
-start the system from the SD card, and reach the login prompt.
-
-Flashing low-level bootloaders
-==============================
-
-The BeagleV comes pre-flashed with functional low-level bootloaders
-(called "secondboot" and "ddrinit"). Re-flashing them is not necessary
-to use this Buildroot defconfig. However, for the sake of
-completeness, Buildroot builds and provides those low-level bootloader
-images.
-
-You can flash them as follows:
-
- - In the same "pre-loader" menu as the one used above, instead of
- entering 0 or 1, enter the magic "root@s5t" string. This enters the
- "expert" features.
-
- - Then, press 0 and send over X-modem the
- bootloader-JH7100-buildroot.bin.out file.
-
- - Then, press 1 and send over X-modem the
- ddrinit-2133-buildroot.bin.out.
-
-Note that the reflashing mechanism itself relies on those low-level
-bootloaders, so if you flash non-working versions, you'll have to go
-through a recovery process. This requires wiring up to a separate
-debug UART, which pins are located near the HDMI connector. See
-https://wiki.seeedstudio.com/BeagleV-Update-bootloader-ddr-init-boot-uboot-Recover-bootloader/
-section "Recover the bootloader" for more details. The instructions
-make use of a jh7100-recover tool, which Buildroot has built as part
-of this defconfig: it is available as output/host/bin/jh7100-recover.
diff --git a/configs/beaglev_defconfig b/configs/beaglev_defconfig
deleted file mode 100644
index 9984b8b74e..0000000000
--- a/configs/beaglev_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-BR2_riscv=y
-BR2_riscv_custom=y
-BR2_RISCV_ISA_RVM=y
-BR2_RISCV_ISA_RVA=y
-BR2_RISCV_ISA_RVF=y
-BR2_RISCV_ISA_RVD=y
-BR2_RISCV_ISA_RVC=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_13=y
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/beaglev/post-build.sh"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/beaglev/genimage.cfg"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-# tag buildroot-20210609 of the 5.13 branch (esmil_starlight)
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,linux,83dba1f25dfc118cacec991c31a7a4cfa7405c89)/linux-83dba1f25dfc118cacec991c31a7a4cfa7405c89.tar.gz"
-BR2_LINUX_KERNEL_DEFCONFIG="starlight"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="starfive/jh7100-beaglev-starlight"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-# BR2_TARGET_ROOTFS_TAR is not set
-BR2_TARGET_BEAGLEV_DDRINIT=y
-BR2_TARGET_BEAGLEV_SECONDBOOT=y
-BR2_TARGET_OPENSBI=y
-BR2_TARGET_OPENSBI_CUSTOM_TARBALL=y
-# upstream opensbi master branch
-BR2_TARGET_OPENSBI_CUSTOM_TARBALL_LOCATION="$(call github,riscv,opensbi,79f9b4220ffa7f74356054be25d450d7958bf16c)/opensbi-79f9b4220ffa7f74356054be25d450d7958bf16c.tar.gz"
-BR2_TARGET_OPENSBI_PLAT="generic"
-# BR2_TARGET_OPENSBI_INSTALL_DYNAMIC_IMG is not set
-# BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set
-BR2_TARGET_OPENSBI_UBOOT_PAYLOAD=y
-BR2_TARGET_OPENSBI_FW_FDT_PATH=y
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
-# HEAD of the starfive-tech:Fedora_VIC_7100_2021.04 branch
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,starfive-tech,u-boot,64ead5b83959da8eb87b6963843addf5942e6ed4)/uboot-64ead5b83959da8eb87b6963843addf5942e6ed4.tar.gz"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="starfive_vic7100_beagle_v_smode"
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_JH71XX_TOOLS=y
-BR2_GLOBAL_PATCH_DIR="board/beaglev/patches"
--
2.45.0
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 6+ messages in thread* [Buildroot] [PATCH 4/5] boot/beaglev-secondboot: remove package
2024-07-13 14:01 [Buildroot] [PATCH 1/5] configs/beagleboneai_defconfig: move board files to board/beagleboard/beagleboneai Romain Naour via buildroot
2024-07-13 14:01 ` [Buildroot] [PATCH 2/5] configs/beaglebone{_qt5}_defconfig: move board files to board/beagleboard/beaglebone Romain Naour via buildroot
2024-07-13 14:01 ` [Buildroot] [PATCH 3/5] configs/beaglev_defconfig: remove defconfig Romain Naour via buildroot
@ 2024-07-13 14:01 ` Romain Naour via buildroot
2024-07-13 14:01 ` [Buildroot] [PATCH 5/5] boot/beaglev-ddrinit: " Romain Naour via buildroot
2024-07-13 14:54 ` [Buildroot] [PATCH 1/5] configs/beagleboneai_defconfig: move board files to board/beagleboard/beagleboneai Thomas Petazzoni via buildroot
4 siblings, 0 replies; 6+ messages in thread
From: Romain Naour via buildroot @ 2024-07-13 14:01 UTC (permalink / raw)
To: buildroot; +Cc: Romain Naour, Thomas Petazzoni
The beaglev-secondboot was meant for the BeagleV-Starlight
board (beaglev_defconfig) but the support was removed.
Remove beaglev-secondboot too.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
Config.in.legacy | 7 +++++
DEVELOPERS | 1 -
boot/Config.in | 1 -
boot/beaglev-secondboot/Config.in | 9 ------
.../beaglev-secondboot.hash | 3 --
boot/beaglev-secondboot/beaglev-secondboot.mk | 28 -------------------
6 files changed, 7 insertions(+), 42 deletions(-)
delete mode 100644 boot/beaglev-secondboot/Config.in
delete mode 100644 boot/beaglev-secondboot/beaglev-secondboot.hash
delete mode 100644 boot/beaglev-secondboot/beaglev-secondboot.mk
diff --git a/Config.in.legacy b/Config.in.legacy
index 78dcabed63..28cfce3ce1 100644
--- a/Config.in.legacy
+++ b/Config.in.legacy
@@ -146,6 +146,13 @@ endif
comment "Legacy options removed in 2024.08"
+config BR2_TARGET_BEAGLEV_SECONDBOOT
+ bool "beaglev-secondboot has been removed"
+ select BR2_LEGACY
+ help
+ The beaglev-secondboot package has been removed after
+ the beaglev_defconfig removal.
+
config BR2_PACKAGE_ONEVPL_INTEL_GPU
bool "onevpl-intel-gpu has been renamed"
select BR2_LEGACY
diff --git a/DEVELOPERS b/DEVELOPERS
index 181e5ef174..8a438db9cd 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -3069,7 +3069,6 @@ N: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
F: arch/Config.in.arm
F: board/stmicroelectronics/stm32mp157c-dk2/
F: boot/beaglev-ddrinit/
-F: boot/beaglev-secondboot/
F: boot/boot-wrapper-aarch64/
F: boot/grub2/
F: configs/stm32mp157c_dk2_defconfig
diff --git a/boot/Config.in b/boot/Config.in
index 25a50265d2..8f504fee34 100644
--- a/boot/Config.in
+++ b/boot/Config.in
@@ -5,7 +5,6 @@ source "boot/at91bootstrap3/Config.in"
source "boot/arm-trusted-firmware/Config.in"
source "boot/barebox/Config.in"
source "boot/beaglev-ddrinit/Config.in"
-source "boot/beaglev-secondboot/Config.in"
source "boot/binaries-marvell/Config.in"
source "boot/boot-wrapper-aarch64/Config.in"
source "boot/edk2/Config.in"
diff --git a/boot/beaglev-secondboot/Config.in b/boot/beaglev-secondboot/Config.in
deleted file mode 100644
index a9695fc138..0000000000
--- a/boot/beaglev-secondboot/Config.in
+++ /dev/null
@@ -1,9 +0,0 @@
-config BR2_TARGET_BEAGLEV_SECONDBOOT
- bool "beaglev-secondboot"
- depends on BR2_riscv
- depends on BR2_HOSTARCH = "x86_64" # host-riscv64-elf-toolchain
- help
- This package builds the SecondBoot firmware used on the
- BeagleV platform.
-
- https://github.com/starfive-tech/beagle_secondBoot
diff --git a/boot/beaglev-secondboot/beaglev-secondboot.hash b/boot/beaglev-secondboot/beaglev-secondboot.hash
deleted file mode 100644
index d35d3a3856..0000000000
--- a/boot/beaglev-secondboot/beaglev-secondboot.hash
+++ /dev/null
@@ -1,3 +0,0 @@
-# Locally computed
-sha256 bf152500e9f7e467bb1dee95a2291f9ecfaaebe1d64b93f6d403cfaf50e540e0 beaglev-secondboot-e17302063c9a4b74475b18ff24dd149c27257354.tar.gz
-sha256 284d26192537710910ec1f112ec5f4c981601ae23702391986d6ce0b8ba90813 LICENSE
diff --git a/boot/beaglev-secondboot/beaglev-secondboot.mk b/boot/beaglev-secondboot/beaglev-secondboot.mk
deleted file mode 100644
index 7e5f5681f4..0000000000
--- a/boot/beaglev-secondboot/beaglev-secondboot.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-################################################################################
-#
-# beaglev-secondboot
-#
-################################################################################
-
-# Commit on the 'starfive' branch
-BEAGLEV_SECONDBOOT_VERSION = e17302063c9a4b74475b18ff24dd149c27257354
-BEAGLEV_SECONDBOOT_SITE = $(call github,starfive-tech,beagle_secondBoot,$(BEAGLEV_SECONDBOOT_VERSION))
-BEAGLEV_SECONDBOOT_INSTALL_TARGET = NO
-BEAGLEV_SECONDBOOT_INSTALL_IMAGES = YES
-BEAGLEV_SECONDBOOT_DEPENDENCIES = host-riscv64-elf-toolchain
-BEAGLEV_SECONDBOOT_LICENSE = GPL-2.0+
-BEAGLEV_SECONDBOOT_LICENSE_FILES = LICENSE
-
-define BEAGLEV_SECONDBOOT_BUILD_CMDS
- $(MAKE) -C $(@D)/build \
- CROSS_COMPILE=$(HOST_DIR)/bin/riscv64-unknown-elf- \
- SUFFIX=buildroot \
- GIT_VERSION=$(BEAGLEV_SECONDBOOT_VERSION)
-endef
-
-define BEAGLEV_SECONDBOOT_INSTALL_IMAGES_CMDS
- $(INSTALL) -D -m 0644 $(@D)/build/bootloader-JH7100-buildroot.bin.out \
- $(BINARIES_DIR)/bootloader-JH7100-buildroot.bin.out
-endef
-
-$(eval $(generic-package))
--
2.45.0
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 6+ messages in thread* [Buildroot] [PATCH 5/5] boot/beaglev-ddrinit: remove package
2024-07-13 14:01 [Buildroot] [PATCH 1/5] configs/beagleboneai_defconfig: move board files to board/beagleboard/beagleboneai Romain Naour via buildroot
` (2 preceding siblings ...)
2024-07-13 14:01 ` [Buildroot] [PATCH 4/5] boot/beaglev-secondboot: remove package Romain Naour via buildroot
@ 2024-07-13 14:01 ` Romain Naour via buildroot
2024-07-13 14:54 ` [Buildroot] [PATCH 1/5] configs/beagleboneai_defconfig: move board files to board/beagleboard/beagleboneai Thomas Petazzoni via buildroot
4 siblings, 0 replies; 6+ messages in thread
From: Romain Naour via buildroot @ 2024-07-13 14:01 UTC (permalink / raw)
To: buildroot; +Cc: Romain Naour, Thomas Petazzoni
The beaglev-ddrinit was meant for the BeagleV-Starlight
board (beaglev_defconfig) but the support was removed.
Remove beaglev-ddrinit too.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
---
Config.in.legacy | 7 ++++++
DEVELOPERS | 1 -
boot/Config.in | 1 -
boot/beaglev-ddrinit/Config.in | 9 --------
boot/beaglev-ddrinit/beaglev-ddrinit.hash | 3 ---
boot/beaglev-ddrinit/beaglev-ddrinit.mk | 28 -----------------------
6 files changed, 7 insertions(+), 42 deletions(-)
delete mode 100644 boot/beaglev-ddrinit/Config.in
delete mode 100644 boot/beaglev-ddrinit/beaglev-ddrinit.hash
delete mode 100644 boot/beaglev-ddrinit/beaglev-ddrinit.mk
diff --git a/Config.in.legacy b/Config.in.legacy
index 28cfce3ce1..36efcfb7af 100644
--- a/Config.in.legacy
+++ b/Config.in.legacy
@@ -146,6 +146,13 @@ endif
comment "Legacy options removed in 2024.08"
+config BR2_TARGET_BEAGLEV_DDRINIT
+ bool "beaglev-ddrinit has been removed"
+ select BR2_LEGACY
+ help
+ The beaglev-secondboot package has been removed after
+ the beaglev_defconfig removal.
+
config BR2_TARGET_BEAGLEV_SECONDBOOT
bool "beaglev-secondboot has been removed"
select BR2_LEGACY
diff --git a/DEVELOPERS b/DEVELOPERS
index 8a438db9cd..6acda869dd 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -3068,7 +3068,6 @@ F: package/go/
N: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
F: arch/Config.in.arm
F: board/stmicroelectronics/stm32mp157c-dk2/
-F: boot/beaglev-ddrinit/
F: boot/boot-wrapper-aarch64/
F: boot/grub2/
F: configs/stm32mp157c_dk2_defconfig
diff --git a/boot/Config.in b/boot/Config.in
index 8f504fee34..5c8d0e7ee5 100644
--- a/boot/Config.in
+++ b/boot/Config.in
@@ -4,7 +4,6 @@ source "boot/afboot-stm32/Config.in"
source "boot/at91bootstrap3/Config.in"
source "boot/arm-trusted-firmware/Config.in"
source "boot/barebox/Config.in"
-source "boot/beaglev-ddrinit/Config.in"
source "boot/binaries-marvell/Config.in"
source "boot/boot-wrapper-aarch64/Config.in"
source "boot/edk2/Config.in"
diff --git a/boot/beaglev-ddrinit/Config.in b/boot/beaglev-ddrinit/Config.in
deleted file mode 100644
index 7ca92a7b9b..0000000000
--- a/boot/beaglev-ddrinit/Config.in
+++ /dev/null
@@ -1,9 +0,0 @@
-config BR2_TARGET_BEAGLEV_DDRINIT
- bool "beaglev-ddrinit"
- depends on BR2_riscv
- depends on BR2_HOSTARCH = "x86_64" # host-riscv64-elf-toolchain
- help
- This package builds the DDRinit firmware used on the BeagleV
- platform.
-
- https://github.com/starfive-tech/beagle_ddrinit
diff --git a/boot/beaglev-ddrinit/beaglev-ddrinit.hash b/boot/beaglev-ddrinit/beaglev-ddrinit.hash
deleted file mode 100644
index d4235904d1..0000000000
--- a/boot/beaglev-ddrinit/beaglev-ddrinit.hash
+++ /dev/null
@@ -1,3 +0,0 @@
-# Locally computed
-sha256 08a49355f89fc2cb4f5101183339c9c6f86b722545d0abbc319aab26a511dad7 beaglev-ddrinit-8d6318acfe71e790c983b34448c9abfcfcec3ed8.tar.gz
-sha256 284d26192537710910ec1f112ec5f4c981601ae23702391986d6ce0b8ba90813 LICENSE
diff --git a/boot/beaglev-ddrinit/beaglev-ddrinit.mk b/boot/beaglev-ddrinit/beaglev-ddrinit.mk
deleted file mode 100644
index d9707de610..0000000000
--- a/boot/beaglev-ddrinit/beaglev-ddrinit.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-################################################################################
-#
-# beaglev-ddrinit
-#
-################################################################################
-
-# Commit on the 'starfive' branch
-BEAGLEV_DDRINIT_VERSION = 8d6318acfe71e790c983b34448c9abfcfcec3ed8
-BEAGLEV_DDRINIT_SITE = $(call github,starfive-tech,beagle_ddrinit,$(BEAGLEV_DDRINIT_VERSION))
-BEAGLEV_DDRINIT_INSTALL_TARGET = NO
-BEAGLEV_DDRINIT_INSTALL_IMAGES = YES
-BEAGLEV_DDRINIT_DEPENDENCIES = host-riscv64-elf-toolchain
-BEAGLEV_DDRINIT_LICENSE = GPL-2.0+
-BEAGLEV_DDRINIT_LICENSE_FILES = LICENSE
-
-define BEAGLEV_DDRINIT_BUILD_CMDS
- $(MAKE) -C $(@D)/build \
- CROSS_COMPILE=$(HOST_DIR)/bin/riscv64-unknown-elf- \
- SUFFIX=buildroot \
- GIT_VERSION=$(BEAGLEV_DDRINIT_VERSION)
-endef
-
-define BEAGLEV_DDRINIT_INSTALL_IMAGES_CMDS
- $(INSTALL) -D -m 0644 $(@D)/build/ddrinit-2133-buildroot.bin.out \
- $(BINARIES_DIR)/ddrinit-2133-buildroot.bin.out
-endef
-
-$(eval $(generic-package))
--
2.45.0
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 6+ messages in thread