All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Xu Yang <xu.yang_2@nxp.com>
Cc: vkoul@kernel.org, kishon@kernel.org, krzk+dt@kernel.org,
	conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com,
	gregkh@linuxfoundation.org, peter.chen@kernel.org,
	herve.codina@bootlin.com, linux-phy@lists.infradead.org,
	devicetree@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org,
	jun.li@nxp.com
Subject: Re: [PATCH 3/6] dt-bindings: phy: mxs-usb-phy: add nxp,sim property
Date: Mon, 22 Jul 2024 20:51:10 -0600	[thread overview]
Message-ID: <20240723025110.GA199927-robh@kernel.org> (raw)
In-Reply-To: <20240718102637.3964232-3-xu.yang_2@nxp.com>

On Thu, Jul 18, 2024 at 06:26:34PM +0800, Xu Yang wrote:
> i.MX7ULP need properly set System Integration Module(SIM) module to make
> usb wakeup work well. This will add a "nxp,sim" property.
> 
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
> ---
>  .../devicetree/bindings/phy/fsl,mxs-usbphy.yaml    | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> index f4b1ca2fb562..2141f271f8f1 100644
> --- a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> +++ b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> @@ -87,6 +87,12 @@ properties:
>      maximum: 119
>      default: 100
>  
> +  nxp,sim:
> +    description:
> +      The system integration module (SIM) provides system control and chip
> +      configuration registers.
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +
>  required:
>    - compatible
>    - reg
> @@ -110,6 +116,14 @@ allOf:
>        required:
>          - fsl,anatop
>  
> +  - if:
> +      properties:
> +        compatible:
> +          const: fsl,imx7ulp-usbphy
> +    then:
> +      required:
> +        - nxp,sim

       else:
         properties:
           nxp,sim: false


> +
>  additionalProperties: false
>  
>  examples:
> -- 
> 2.34.1
> 

WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Xu Yang <xu.yang_2@nxp.com>
Cc: vkoul@kernel.org, kishon@kernel.org, krzk+dt@kernel.org,
	conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com,
	gregkh@linuxfoundation.org, peter.chen@kernel.org,
	herve.codina@bootlin.com, linux-phy@lists.infradead.org,
	devicetree@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org,
	jun.li@nxp.com
Subject: Re: [PATCH 3/6] dt-bindings: phy: mxs-usb-phy: add nxp,sim property
Date: Mon, 22 Jul 2024 20:51:10 -0600	[thread overview]
Message-ID: <20240723025110.GA199927-robh@kernel.org> (raw)
In-Reply-To: <20240718102637.3964232-3-xu.yang_2@nxp.com>

On Thu, Jul 18, 2024 at 06:26:34PM +0800, Xu Yang wrote:
> i.MX7ULP need properly set System Integration Module(SIM) module to make
> usb wakeup work well. This will add a "nxp,sim" property.
> 
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
> ---
>  .../devicetree/bindings/phy/fsl,mxs-usbphy.yaml    | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> index f4b1ca2fb562..2141f271f8f1 100644
> --- a/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> +++ b/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml
> @@ -87,6 +87,12 @@ properties:
>      maximum: 119
>      default: 100
>  
> +  nxp,sim:
> +    description:
> +      The system integration module (SIM) provides system control and chip
> +      configuration registers.
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +
>  required:
>    - compatible
>    - reg
> @@ -110,6 +116,14 @@ allOf:
>        required:
>          - fsl,anatop
>  
> +  - if:
> +      properties:
> +        compatible:
> +          const: fsl,imx7ulp-usbphy
> +    then:
> +      required:
> +        - nxp,sim

       else:
         properties:
           nxp,sim: false


> +
>  additionalProperties: false
>  
>  examples:
> -- 
> 2.34.1
> 

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  reply	other threads:[~2024-07-23  2:51 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-18 10:26 [PATCH 1/6] usb: phy: mxs: Using regulator phy-3p0 Xu Yang
2024-07-18 10:26 ` Xu Yang
2024-07-18 10:26 ` [PATCH 2/6] usb: phy: mxs: keep USBPHY2's clk always on Xu Yang
2024-07-18 10:26   ` Xu Yang
2024-07-18 15:00   ` Frank Li
2024-07-18 15:00     ` Frank Li
2024-07-19  7:16     ` Xu Yang
2024-07-19  7:16       ` Xu Yang
2024-07-18 10:26 ` [PATCH 3/6] dt-bindings: phy: mxs-usb-phy: add nxp,sim property Xu Yang
2024-07-18 10:26   ` Xu Yang
2024-07-23  2:51   ` Rob Herring [this message]
2024-07-23  2:51     ` Rob Herring
2024-07-24  1:29     ` Xu Yang
2024-07-24  1:29       ` Xu Yang
2024-07-18 10:26 ` [PATCH 4/6] usb: phy: mxs: add wakeup enable for imx7ulp Xu Yang
2024-07-18 10:26   ` Xu Yang
2024-07-18 10:26 ` [PATCH 5/6] usb: phy: mxs: enable weak 1p1 regulator for imx6ul during suspend Xu Yang
2024-07-18 10:26   ` Xu Yang
2024-07-18 15:12   ` Frank Li
2024-07-18 15:12     ` Frank Li
2024-07-19  7:37     ` Xu Yang
2024-07-19  7:37       ` Xu Yang
2024-07-18 10:26 ` [PATCH 6/6] ARM: dts: imx7ulp: add "nxp,sim" property for usbphy1 Xu Yang
2024-07-18 10:26   ` Xu Yang
2024-07-18 14:42 ` [PATCH 1/6] usb: phy: mxs: Using regulator phy-3p0 Frank Li
2024-07-18 14:42   ` Frank Li
2024-07-19  7:05   ` Xu Yang
2024-07-19  7:05     ` Xu Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240723025110.GA199927-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=herve.codina@bootlin.com \
    --cc=imx@lists.linux.dev \
    --cc=jun.li@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=kishon@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=peter.chen@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=vkoul@kernel.org \
    --cc=xu.yang_2@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.