From: Chris Morgan <macroalpha82@gmail.com>
To: linux-rockchip@lists.infradead.org
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
jagan@edgeble.ai, andyshrk@163.com, jonas@kwiboo.se,
sre@kernel.org, t.schramm@manjaro.org, heiko@sntech.de,
conor+dt@kernel.org, krzk+dt@kernel.org, robh@kernel.org,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH 3/5] arm64: dts: rockchip: Pull up sdio pins on RK3588
Date: Fri, 26 Jul 2024 14:49:46 -0500 [thread overview]
Message-ID: <20240726194948.109326-4-macroalpha82@gmail.com> (raw)
In-Reply-To: <20240726194948.109326-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
When using an Ampak derived bcm43456 on an RK3588s based GameForce Ace
the WiFi failed to work properly until I set the SDIO pins from
pull-none to pull-up. This matches the vendor kernel located at [1].
I tested this then on an RK3588s based Indiedroid Nova and did not
observe any adverse effects.
[1] https://github.com/rockchip-linux/kernel/commit/b96485b7af46a99c14f3c4818eb18c7836eb809c
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
index 30db12c4fc82..d1368418502a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
@@ -2449,15 +2449,15 @@ sdiom1_pins: sdiom1-pins {
/* sdio_clk_m1 */
<3 RK_PA5 2 &pcfg_pull_none>,
/* sdio_cmd_m1 */
- <3 RK_PA4 2 &pcfg_pull_none>,
+ <3 RK_PA4 2 &pcfg_pull_up>,
/* sdio_d0_m1 */
- <3 RK_PA0 2 &pcfg_pull_none>,
+ <3 RK_PA0 2 &pcfg_pull_up>,
/* sdio_d1_m1 */
- <3 RK_PA1 2 &pcfg_pull_none>,
+ <3 RK_PA1 2 &pcfg_pull_up>,
/* sdio_d2_m1 */
- <3 RK_PA2 2 &pcfg_pull_none>,
+ <3 RK_PA2 2 &pcfg_pull_up>,
/* sdio_d3_m1 */
- <3 RK_PA3 2 &pcfg_pull_none>;
+ <3 RK_PA3 2 &pcfg_pull_up>;
};
};
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Chris Morgan <macroalpha82@gmail.com>
To: linux-rockchip@lists.infradead.org
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
jagan@edgeble.ai, andyshrk@163.com, jonas@kwiboo.se,
sre@kernel.org, t.schramm@manjaro.org, heiko@sntech.de,
conor+dt@kernel.org, krzk+dt@kernel.org, robh@kernel.org,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH 3/5] arm64: dts: rockchip: Pull up sdio pins on RK3588
Date: Fri, 26 Jul 2024 14:49:46 -0500 [thread overview]
Message-ID: <20240726194948.109326-4-macroalpha82@gmail.com> (raw)
In-Reply-To: <20240726194948.109326-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
When using an Ampak derived bcm43456 on an RK3588s based GameForce Ace
the WiFi failed to work properly until I set the SDIO pins from
pull-none to pull-up. This matches the vendor kernel located at [1].
I tested this then on an RK3588s based Indiedroid Nova and did not
observe any adverse effects.
[1] https://github.com/rockchip-linux/kernel/commit/b96485b7af46a99c14f3c4818eb18c7836eb809c
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
index 30db12c4fc82..d1368418502a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi
@@ -2449,15 +2449,15 @@ sdiom1_pins: sdiom1-pins {
/* sdio_clk_m1 */
<3 RK_PA5 2 &pcfg_pull_none>,
/* sdio_cmd_m1 */
- <3 RK_PA4 2 &pcfg_pull_none>,
+ <3 RK_PA4 2 &pcfg_pull_up>,
/* sdio_d0_m1 */
- <3 RK_PA0 2 &pcfg_pull_none>,
+ <3 RK_PA0 2 &pcfg_pull_up>,
/* sdio_d1_m1 */
- <3 RK_PA1 2 &pcfg_pull_none>,
+ <3 RK_PA1 2 &pcfg_pull_up>,
/* sdio_d2_m1 */
- <3 RK_PA2 2 &pcfg_pull_none>,
+ <3 RK_PA2 2 &pcfg_pull_up>,
/* sdio_d3_m1 */
- <3 RK_PA3 2 &pcfg_pull_none>;
+ <3 RK_PA3 2 &pcfg_pull_up>;
};
};
--
2.34.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2024-07-26 19:52 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-26 19:49 [PATCH 0/5] Add GameForce Ace Chris Morgan
2024-07-26 19:49 ` Chris Morgan
2024-07-26 19:49 ` [PATCH 1/5] dt-bindings: power: supply: add dual-cell for cw2015 Chris Morgan
2024-07-26 19:49 ` Chris Morgan
2024-07-30 16:36 ` Rob Herring
2024-07-30 16:36 ` Rob Herring
2024-07-26 19:49 ` [PATCH 2/5] power: supply: cw2015: Add support for dual-cell configurations Chris Morgan
2024-07-26 19:49 ` Chris Morgan
2024-07-26 21:06 ` Sebastian Reichel
2024-07-26 21:06 ` Sebastian Reichel
2024-07-31 16:02 ` Chris Morgan
2024-07-31 16:02 ` Chris Morgan
2024-07-31 17:02 ` Sebastian Reichel
2024-07-31 17:02 ` Sebastian Reichel
2024-07-31 17:14 ` Chris Morgan
2024-07-31 17:14 ` Chris Morgan
2024-08-02 21:39 ` Dragan Simic
2024-08-02 21:39 ` Dragan Simic
2024-08-04 16:29 ` Sebastian Reichel
2024-08-04 16:29 ` Sebastian Reichel
2024-08-04 16:42 ` Dragan Simic
2024-08-04 16:42 ` Dragan Simic
2024-07-26 19:49 ` Chris Morgan [this message]
2024-07-26 19:49 ` [PATCH 3/5] arm64: dts: rockchip: Pull up sdio pins on RK3588 Chris Morgan
2024-07-26 21:42 ` Heiko Stübner
2024-07-26 21:42 ` Heiko Stübner
2024-07-31 15:30 ` Chris Morgan
2024-07-31 15:30 ` Chris Morgan
2024-07-26 19:49 ` [PATCH 4/5] dt-bindings: arm: rockchip: Add GameForce Ace Chris Morgan
2024-07-26 19:49 ` Chris Morgan
2024-07-27 9:09 ` Krzysztof Kozlowski
2024-07-27 9:09 ` Krzysztof Kozlowski
2024-07-26 19:49 ` [PATCH 5/5] arm64: dts: " Chris Morgan
2024-07-26 19:49 ` Chris Morgan
2024-07-29 18:52 ` [PATCH 0/5] " Rob Herring (Arm)
2024-07-29 18:52 ` Rob Herring (Arm)
2024-07-31 15:32 ` Chris Morgan
2024-07-31 15:32 ` Chris Morgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240726194948.109326-4-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=andyshrk@163.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jagan@edgeble.ai \
--cc=jonas@kwiboo.se \
--cc=krzk+dt@kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=macromorgan@hotmail.com \
--cc=robh@kernel.org \
--cc=sre@kernel.org \
--cc=t.schramm@manjaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.