From: Deepak Gupta <debug@rivosinc.com>
To: qemu-riscv@nongnu.org, qemu-devel@nongnu.org, jim.shu@sifive.com,
andy.chiu@sifive.com, jesse.huang@sifive.com,
kito.cheng@sifive.com
Cc: palmer@dabbelt.com, Alistair.Francis@wdc.com, laurent@vivier.eu,
bmeng.cn@gmail.com, liwei1518@gmail.com,
dbarboza@ventanamicro.com, zhiwei_liu@linux.alibaba.com,
Deepak Gupta <debug@rivosinc.com>
Subject: [PATCH v2 11/24] target/riscv: introduce ssp and enabling controls for zicfiss
Date: Mon, 29 Jul 2024 10:53:13 -0700 [thread overview]
Message-ID: <20240729175327.73705-12-debug@rivosinc.com> (raw)
In-Reply-To: <20240729175327.73705-1-debug@rivosinc.com>
zicfiss introduces a new state ssp ("shadow stack register") in cpu.
ssp is expressed as a new unprivileged csr (CSR_SSP=0x11) and holds
virtual address for shadow stack as programmed by software.
Shadow stack (for each mode) is enabled via bit3 in *envcfg CSRs.
Shadow stack can be enabled for a mode only if it's higher privileged
mode had it enabled for itself. M mode doesn't need enabling control,
it's always available if extension is available on cpu.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
---
target/riscv/cpu.c | 3 ++
target/riscv/cpu.h | 2 ++
target/riscv/cpu_bits.h | 6 ++++
target/riscv/csr.c | 74 +++++++++++++++++++++++++++++++++++++++++
4 files changed, 85 insertions(+)
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 54fcf380ff..6b50ae0e45 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -998,6 +998,9 @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type)
/* on reset elp is set to NO_LP_EXPECTED */
env->elp = NO_LP_EXPECTED;
+ /* on reset ssp is set to 0 */
+ env->ssp = 0;
+
/*
* Bits 10, 6, 2 and 12 of mideleg are read only 1 when the Hypervisor
* extension is enabled.
diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index 7fed5d2750..81283a1d76 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -224,6 +224,8 @@ struct CPUArchState {
/* elp state for zicfilp extension */
cfi_elp elp;
+ /* shadow stack register for zicfiss extension */
+ target_ulong ssp;
/* sw check code for sw check exception */
target_ulong sw_check_code;
#ifdef CONFIG_USER_ONLY
diff --git a/target/riscv/cpu_bits.h b/target/riscv/cpu_bits.h
index 477e24feaf..589326e516 100644
--- a/target/riscv/cpu_bits.h
+++ b/target/riscv/cpu_bits.h
@@ -34,6 +34,9 @@
/* Control and Status Registers */
+/* zicfiss user ssp csr */
+#define CSR_SSP 0x011
+
/* User Trap Setup */
#define CSR_USTATUS 0x000
#define CSR_UIE 0x004
@@ -760,6 +763,7 @@ typedef enum RISCVException {
/* Execution environment configuration bits */
#define MENVCFG_FIOM BIT(0)
#define MENVCFG_LPE BIT(2) /* zicfilp */
+#define MENVCFG_SSE BIT(3) /* zicfiss */
#define MENVCFG_CBIE (3UL << 4)
#define MENVCFG_CBCFE BIT(6)
#define MENVCFG_CBZE BIT(7)
@@ -774,12 +778,14 @@ typedef enum RISCVException {
#define SENVCFG_FIOM MENVCFG_FIOM
#define SENVCFG_LPE MENVCFG_LPE
+#define SENVCFG_SSE MENVCFG_SSE
#define SENVCFG_CBIE MENVCFG_CBIE
#define SENVCFG_CBCFE MENVCFG_CBCFE
#define SENVCFG_CBZE MENVCFG_CBZE
#define HENVCFG_FIOM MENVCFG_FIOM
#define HENVCFG_LPE MENVCFG_LPE
+#define HENVCFG_SSE MENVCFG_SSE
#define HENVCFG_CBIE MENVCFG_CBIE
#define HENVCFG_CBCFE MENVCFG_CBCFE
#define HENVCFG_CBZE MENVCFG_CBZE
diff --git a/target/riscv/csr.c b/target/riscv/csr.c
index a5a969a377..d72d6289fb 100644
--- a/target/riscv/csr.c
+++ b/target/riscv/csr.c
@@ -185,6 +185,47 @@ static RISCVException zcmt(CPURISCVState *env, int csrno)
return RISCV_EXCP_NONE;
}
+static RISCVException cfi_ss(CPURISCVState *env, int csrno)
+{
+ /* no cfi extension, access to csr is illegal */
+ if (!env_archcpu(env)->cfg.ext_zicfiss) {
+ return RISCV_EXCP_ILLEGAL_INST;
+ }
+ /*
+ * CONFIG_USER_MODE always allow access for now. Better for user mode only
+ * functionality
+ */
+#if !defined(CONFIG_USER_ONLY)
+ if (env->debugger) {
+ return RISCV_EXCP_NONE;
+ }
+ /* current priv not M */
+ if (env->priv != PRV_M) {
+ /* menvcfg says no shadow stack enable */
+ if (!get_field(env->menvcfg, MENVCFG_SSE)) {
+ return RISCV_EXCP_ILLEGAL_INST;
+ }
+
+ /* V = 1 and henvcfg says no shadow stack enable */
+ if (env->virt_enabled &&
+ !get_field(env->henvcfg, HENVCFG_SSE)) {
+ return RISCV_EXCP_VIRT_INSTRUCTION_FAULT;
+ }
+
+ /*
+ * SSP are not accessible to U mode if disabled via senvcfg
+ * CSR
+ */
+ if ((env->priv == PRV_U) &&
+ (!get_field(env->senvcfg, SENVCFG_SSE))) {
+ return RISCV_EXCP_ILLEGAL_INST;
+ }
+ }
+#endif
+
+ return RISCV_EXCP_NONE;
+}
+
#if !defined(CONFIG_USER_ONLY)
static RISCVException mctr(CPURISCVState *env, int csrno)
{
@@ -596,6 +637,19 @@ static RISCVException seed(CPURISCVState *env, int csrno)
#endif
}
+/* zicfiss CSR_SSP read and write */
+static int read_ssp(CPURISCVState *env, int csrno, target_ulong *val)
+{
+ *val = env->ssp;
+ return RISCV_EXCP_NONE;
+}
+
+static int write_ssp(CPURISCVState *env, int csrno, target_ulong val)
+{
+ env->ssp = val;
+ return RISCV_EXCP_NONE;
+}
+
/* User Floating-Point CSRs */
static RISCVException read_fflags(CPURISCVState *env, int csrno,
target_ulong *val)
@@ -2111,6 +2165,10 @@ static RISCVException write_menvcfg(CPURISCVState *env, int csrno,
if (env_archcpu(env)->cfg.ext_zicfilp) {
mask |= MENVCFG_LPE;
}
+
+ if (env_archcpu(env)->cfg.ext_zicfiss) {
+ mask |= MENVCFG_SSE;
+ }
}
env->menvcfg = (env->menvcfg & ~mask) | (val & mask);
@@ -2167,6 +2225,13 @@ static RISCVException write_senvcfg(CPURISCVState *env, int csrno,
mask |= SENVCFG_LPE;
}
+ /* Higher mode SSE must be ON for next-less mode SSE to be ON */
+ if (env_archcpu(env)->cfg.ext_zicfiss &&
+ get_field(env->menvcfg, MENVCFG_SSE) &&
+ (env->virt_enabled ? get_field(env->henvcfg, HENVCFG_SSE) : true)) {
+ mask |= SENVCFG_SSE;
+ }
+
env->senvcfg = (env->senvcfg & ~mask) | (val & mask);
return RISCV_EXCP_NONE;
}
@@ -2208,6 +2273,12 @@ static RISCVException write_henvcfg(CPURISCVState *env, int csrno,
if (env_archcpu(env)->cfg.ext_zicfilp) {
mask |= HENVCFG_LPE;
}
+
+ /* H can light up SSE for VS only if HS had it from menvcfg */
+ if (env_archcpu(env)->cfg.ext_zicfiss &&
+ get_field(env->menvcfg, MENVCFG_SSE)) {
+ mask |= HENVCFG_SSE;
+ }
}
env->henvcfg = (env->henvcfg & ~mask) | (val & mask);
@@ -4663,6 +4734,9 @@ riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = {
/* Zcmt Extension */
[CSR_JVT] = {"jvt", zcmt, read_jvt, write_jvt},
+ /* zicfiss Extension, shadow stack register */
+ [CSR_SSP] = { "ssp", cfi_ss, read_ssp, write_ssp },
+
#if !defined(CONFIG_USER_ONLY)
/* Machine Timers and Counters */
[CSR_MCYCLE] = { "mcycle", any, read_hpmcounter,
--
2.44.0
next prev parent reply other threads:[~2024-07-29 17:57 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-29 17:53 [PATCH v2 00/24] riscv support for control flow integrity extensions Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 01/24] target/riscv: Add zicfilp extension Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 02/24] target/riscv: Introduce elp state and enabling controls for zicfilp Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 03/24] target/riscv: save and restore elp state on priv transitions Deepak Gupta
2024-07-29 23:04 ` Richard Henderson
2024-07-29 23:33 ` Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 04/24] target/riscv: additional code information for sw check Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 05/24] target/riscv: tracking indirect branches (fcfi) for zicfilp Deepak Gupta
2024-07-29 23:15 ` Richard Henderson
2024-08-01 6:59 ` Deepak Gupta
2024-08-01 9:12 ` Richard Henderson
2024-08-01 17:05 ` Deepak Gupta
2024-08-01 21:34 ` Richard Henderson
2024-07-29 17:53 ` [PATCH v2 06/24] target/riscv: zicfilp `lpad` impl and branch tracking Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 07/24] disas/riscv: enabled `lpad` disassembly Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 08/24] linux-user/syscall: introduce prctl for indirect branch tracking Deepak Gupta
2024-07-30 6:21 ` Richard Henderson
2024-07-29 17:53 ` [PATCH v2 09/24] linux-user/riscv: implement indirect branch tracking prctls Deepak Gupta
2024-07-30 6:26 ` Richard Henderson
2024-08-01 7:02 ` Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 10/24] target/riscv: Add zicfiss extension Deepak Gupta
2024-07-29 17:53 ` Deepak Gupta [this message]
2024-07-29 17:53 ` [PATCH v2 12/24] target/riscv: tb flag for shadow stack instructions Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 13/24] target/riscv: implement zicfiss instructions Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 14/24] target/riscv: compressed encodings for sspush and sspopchk Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 15/24] target/riscv: mmu changes for zicfiss shadow stack protection Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 16/24] target/riscv: shadow stack mmu index for shadow stack instructions Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 17/24] linux-user/syscall: introduce prctl for shadow stack enable/disable Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 18/24] linux-user/riscv: setup/teardown zicfiss shadow stack for qemu-user Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 19/24] disas/riscv: enable disassembly for zicfiss instructions Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 20/24] disas/riscv: enable disassembly for compressed sspush/sspopchk Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 21/24] target/riscv: add trace-hooks for each case of sw-check exception Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 22/24] linux-user: permit RISC-V CFI dynamic entry in VDSO Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 23/24] linux-user: Add RISC-V zicfilp support " Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 24/24] linux-user/riscv: Adding zicfiss/lp extension in hwprobe syscall Deepak Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240729175327.73705-12-debug@rivosinc.com \
--to=debug@rivosinc.com \
--cc=Alistair.Francis@wdc.com \
--cc=andy.chiu@sifive.com \
--cc=bmeng.cn@gmail.com \
--cc=dbarboza@ventanamicro.com \
--cc=jesse.huang@sifive.com \
--cc=jim.shu@sifive.com \
--cc=kito.cheng@sifive.com \
--cc=laurent@vivier.eu \
--cc=liwei1518@gmail.com \
--cc=palmer@dabbelt.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=zhiwei_liu@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.