From: Deepak Gupta <debug@rivosinc.com>
To: qemu-riscv@nongnu.org, qemu-devel@nongnu.org, jim.shu@sifive.com,
andy.chiu@sifive.com, jesse.huang@sifive.com,
kito.cheng@sifive.com
Cc: palmer@dabbelt.com, Alistair.Francis@wdc.com, laurent@vivier.eu,
bmeng.cn@gmail.com, liwei1518@gmail.com,
dbarboza@ventanamicro.com, zhiwei_liu@linux.alibaba.com,
Deepak Gupta <debug@rivosinc.com>
Subject: [PATCH v2 12/24] target/riscv: tb flag for shadow stack instructions
Date: Mon, 29 Jul 2024 10:53:14 -0700 [thread overview]
Message-ID: <20240729175327.73705-13-debug@rivosinc.com> (raw)
In-Reply-To: <20240729175327.73705-1-debug@rivosinc.com>
Shadow stack instructions can be decoded as zimop / zcmop or shadow stack
instructions depending on whether shadow stack are enabled at current
privilege. This requires a TB flag so that correct TB generation and correct
TB lookup happens. `DisasContext` gets a field indicating whether bcfi is
enabled or not.
This patch also implements helper bcfi function which determines if bcfi
is enabled at current privilege or not. qemu-user also gets field
`ubcfien` indicating whether qemu user has shadow stack enabled or not.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
---
target/riscv/cpu.c | 2 ++
target/riscv/cpu.h | 4 ++++
target/riscv/cpu_helper.c | 30 ++++++++++++++++++++++++++++++
target/riscv/translate.c | 4 ++++
4 files changed, 40 insertions(+)
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 6b50ae0e45..e1ff246c24 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -1029,6 +1029,8 @@ static void riscv_cpu_reset_hold(Object *obj, ResetType type)
#ifdef CONFIG_USER_ONLY
/* qemu-user for riscv, fcfi is off by default */
env->ufcfien = false;
+ /* qemu-user for riscv, bcfi is off by default */
+ env->ubcfien = false;
#endif
#ifndef CONFIG_USER_ONLY
diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index 81283a1d76..0e0a9d2be1 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -231,6 +231,7 @@ struct CPUArchState {
#ifdef CONFIG_USER_ONLY
uint32_t elf_flags;
bool ufcfien;
+ bool ubcfien;
#endif
#ifndef CONFIG_USER_ONLY
@@ -536,6 +537,7 @@ bool riscv_cpu_vector_enabled(CPURISCVState *env);
void riscv_cpu_set_virt_enabled(CPURISCVState *env, bool enable);
int riscv_env_mmu_index(CPURISCVState *env, bool ifetch);
bool cpu_get_fcfien(CPURISCVState *env);
+bool cpu_get_bcfien(CPURISCVState *env);
G_NORETURN void riscv_cpu_do_unaligned_access(CPUState *cs, vaddr addr,
MMUAccessType access_type,
int mmu_idx, uintptr_t retaddr);
@@ -610,6 +612,8 @@ FIELD(TB_FLAGS, PRIV, 24, 2)
FIELD(TB_FLAGS, AXL, 26, 2)
/* zicfilp needs a TB flag to track indirect branches */
FIELD(TB_FLAGS, FCFI_LP_EXPECTED, 28, 1)
+/* zicfiss needs a TB flag so that correct TB is located based on tb flags */
+FIELD(TB_FLAGS, BCFI_ENABLED, 29, 1)
#ifdef TARGET_RISCV32
#define riscv_cpu_mxl(env) ((void)(env), MXL_RV32)
diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
index 2cb1d45467..ce68f5af72 100644
--- a/target/riscv/cpu_helper.c
+++ b/target/riscv/cpu_helper.c
@@ -93,6 +93,32 @@ bool cpu_get_fcfien(CPURISCVState *env)
#endif
}
+bool cpu_get_bcfien(CPURISCVState *env)
+{
+#ifdef CONFIG_USER_ONLY
+ return env->ubcfien;
+#else
+ /* no cfi extension, return false */
+ if (!env_archcpu(env)->cfg.ext_zicfiss) {
+ return false;
+ }
+
+ switch (env->priv) {
+ case PRV_U:
+ return (env->senvcfg & SENVCFG_SSE) ? true : false;
+ case PRV_S:
+ if (env->virt_enabled) {
+ return (env->henvcfg & HENVCFG_SSE) ? true : false;
+ }
+ return (env->menvcfg & MENVCFG_SSE) ? true : false;
+ case PRV_M: /* M-mode shadow stack is always on if hart implements */
+ return true;
+ default:
+ g_assert_not_reached();
+ }
+#endif
+}
+
void cpu_get_tb_cpu_state(CPURISCVState *env, vaddr *pc,
uint64_t *cs_base, uint32_t *pflags)
{
@@ -146,6 +172,10 @@ void cpu_get_tb_cpu_state(CPURISCVState *env, vaddr *pc,
env->elp != NO_LP_EXPECTED);
}
+ if (cpu_get_bcfien(env)) {
+ flags = FIELD_DP32(flags, TB_FLAGS, BCFI_ENABLED, 1);
+ }
+
#ifdef CONFIG_USER_ONLY
fs = EXT_STATUS_DIRTY;
vs = EXT_STATUS_DIRTY;
diff --git a/target/riscv/translate.c b/target/riscv/translate.c
index c746d7df08..34c9bf093d 100644
--- a/target/riscv/translate.c
+++ b/target/riscv/translate.c
@@ -121,6 +121,8 @@ typedef struct DisasContext {
/* zicfilp extension. cfi enabled or not. lp expected or not */
bool fcfi_enabled;
bool fcfi_lp_expected;
+ /* zicfiss extension, if shadow stack was enabled during TB gen */
+ bool bcfi_enabled;
} DisasContext;
static inline bool has_ext(DisasContext *ctx, uint32_t ext)
@@ -1243,6 +1245,8 @@ static void riscv_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs)
ctx->pm_base_enabled = FIELD_EX32(tb_flags, TB_FLAGS, PM_BASE_ENABLED);
ctx->ztso = cpu->cfg.ext_ztso;
ctx->itrigger = FIELD_EX32(tb_flags, TB_FLAGS, ITRIGGER);
+ ctx->bcfi_enabled = cpu_get_bcfien(env) &&
+ FIELD_EX32(tb_flags, TB_FLAGS, BCFI_ENABLED);
ctx->fcfi_lp_expected = FIELD_EX32(tb_flags, TB_FLAGS, FCFI_LP_EXPECTED);
ctx->fcfi_enabled = cpu_get_fcfien(env) && ctx->fcfi_lp_expected;
ctx->zero = tcg_constant_tl(0);
--
2.44.0
next prev parent reply other threads:[~2024-07-29 17:56 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-29 17:53 [PATCH v2 00/24] riscv support for control flow integrity extensions Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 01/24] target/riscv: Add zicfilp extension Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 02/24] target/riscv: Introduce elp state and enabling controls for zicfilp Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 03/24] target/riscv: save and restore elp state on priv transitions Deepak Gupta
2024-07-29 23:04 ` Richard Henderson
2024-07-29 23:33 ` Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 04/24] target/riscv: additional code information for sw check Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 05/24] target/riscv: tracking indirect branches (fcfi) for zicfilp Deepak Gupta
2024-07-29 23:15 ` Richard Henderson
2024-08-01 6:59 ` Deepak Gupta
2024-08-01 9:12 ` Richard Henderson
2024-08-01 17:05 ` Deepak Gupta
2024-08-01 21:34 ` Richard Henderson
2024-07-29 17:53 ` [PATCH v2 06/24] target/riscv: zicfilp `lpad` impl and branch tracking Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 07/24] disas/riscv: enabled `lpad` disassembly Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 08/24] linux-user/syscall: introduce prctl for indirect branch tracking Deepak Gupta
2024-07-30 6:21 ` Richard Henderson
2024-07-29 17:53 ` [PATCH v2 09/24] linux-user/riscv: implement indirect branch tracking prctls Deepak Gupta
2024-07-30 6:26 ` Richard Henderson
2024-08-01 7:02 ` Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 10/24] target/riscv: Add zicfiss extension Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 11/24] target/riscv: introduce ssp and enabling controls for zicfiss Deepak Gupta
2024-07-29 17:53 ` Deepak Gupta [this message]
2024-07-29 17:53 ` [PATCH v2 13/24] target/riscv: implement zicfiss instructions Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 14/24] target/riscv: compressed encodings for sspush and sspopchk Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 15/24] target/riscv: mmu changes for zicfiss shadow stack protection Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 16/24] target/riscv: shadow stack mmu index for shadow stack instructions Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 17/24] linux-user/syscall: introduce prctl for shadow stack enable/disable Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 18/24] linux-user/riscv: setup/teardown zicfiss shadow stack for qemu-user Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 19/24] disas/riscv: enable disassembly for zicfiss instructions Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 20/24] disas/riscv: enable disassembly for compressed sspush/sspopchk Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 21/24] target/riscv: add trace-hooks for each case of sw-check exception Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 22/24] linux-user: permit RISC-V CFI dynamic entry in VDSO Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 23/24] linux-user: Add RISC-V zicfilp support " Deepak Gupta
2024-07-29 17:53 ` [PATCH v2 24/24] linux-user/riscv: Adding zicfiss/lp extension in hwprobe syscall Deepak Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240729175327.73705-13-debug@rivosinc.com \
--to=debug@rivosinc.com \
--cc=Alistair.Francis@wdc.com \
--cc=andy.chiu@sifive.com \
--cc=bmeng.cn@gmail.com \
--cc=dbarboza@ventanamicro.com \
--cc=jesse.huang@sifive.com \
--cc=jim.shu@sifive.com \
--cc=kito.cheng@sifive.com \
--cc=laurent@vivier.eu \
--cc=liwei1518@gmail.com \
--cc=palmer@dabbelt.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=zhiwei_liu@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.