All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Christian Bruel <christian.bruel@foss.st.com>
Cc: kishon@kernel.org, fabrice.gasnier@foss.st.com,
	linux-stm32@st-md-mailman.stormreply.com,
	alexandre.torgue@foss.st.com, p.zabel@pengutronix.de,
	vkoul@kernel.org, devicetree@vger.kernel.org,
	conor+dt@kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, krzk+dt@kernel.org,
	mcoquelin.stm32@gmail.com, linux-phy@lists.infradead.org
Subject: Re: [PATCH 2/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings
Date: Mon, 12 Aug 2024 09:20:48 -0600	[thread overview]
Message-ID: <20240812152048.GA593866-robh@kernel.org> (raw)
In-Reply-To: <172346965242.493337.13574697496053856.robh@kernel.org>

On Mon, Aug 12, 2024 at 07:34:12AM -0600, Rob Herring (Arm) wrote:
> 
> On Mon, 12 Aug 2024 14:05:26 +0200, Christian Bruel wrote:
> > Document the bindings for STM32 COMBOPHY interface, used to support
> > the PCIe and USB3 stm32mp25 drivers.
> > Following entries can be used to tune caracterisation parameters
> >  - st,output-micro-ohms and st,output-vswing-microvolt bindings entries
> > to tune the impedance and voltage swing using discrete simulation results
> >  - st, phy_rx0_eq register to set the internal rx equalizer filter value.
> > 
> > Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
> > ---
> >  .../bindings/phy/st,stm32-combophy.yaml       | 178 ++++++++++++++++++
> >  1 file changed, 178 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/phy/st,stm32-combophy.yaml
> > 
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/st,stm32-combophy.yaml: access-controllers: missing type definition

Ignore this. It's a problem with the build.

Rob

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: Christian Bruel <christian.bruel@foss.st.com>
Cc: kishon@kernel.org, fabrice.gasnier@foss.st.com,
	linux-stm32@st-md-mailman.stormreply.com,
	alexandre.torgue@foss.st.com, p.zabel@pengutronix.de,
	vkoul@kernel.org, devicetree@vger.kernel.org,
	conor+dt@kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, krzk+dt@kernel.org,
	mcoquelin.stm32@gmail.com, linux-phy@lists.infradead.org
Subject: Re: [PATCH 2/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings
Date: Mon, 12 Aug 2024 09:20:48 -0600	[thread overview]
Message-ID: <20240812152048.GA593866-robh@kernel.org> (raw)
In-Reply-To: <172346965242.493337.13574697496053856.robh@kernel.org>

On Mon, Aug 12, 2024 at 07:34:12AM -0600, Rob Herring (Arm) wrote:
> 
> On Mon, 12 Aug 2024 14:05:26 +0200, Christian Bruel wrote:
> > Document the bindings for STM32 COMBOPHY interface, used to support
> > the PCIe and USB3 stm32mp25 drivers.
> > Following entries can be used to tune caracterisation parameters
> >  - st,output-micro-ohms and st,output-vswing-microvolt bindings entries
> > to tune the impedance and voltage swing using discrete simulation results
> >  - st, phy_rx0_eq register to set the internal rx equalizer filter value.
> > 
> > Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
> > ---
> >  .../bindings/phy/st,stm32-combophy.yaml       | 178 ++++++++++++++++++
> >  1 file changed, 178 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/phy/st,stm32-combophy.yaml
> > 
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/st,stm32-combophy.yaml: access-controllers: missing type definition

Ignore this. It's a problem with the build.

Rob


  reply	other threads:[~2024-08-12 15:21 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-12 12:05 [PATCH 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver Christian Bruel
2024-08-12 12:05 ` Christian Bruel
2024-08-12 12:05 ` [PATCH 1/5] MAINTAINERS: add entry for ST STM32MP25 " Christian Bruel
2024-08-12 12:05   ` Christian Bruel
2024-08-12 12:05 ` [PATCH 2/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings Christian Bruel
2024-08-12 12:05   ` Christian Bruel
2024-08-12 13:34   ` Rob Herring (Arm)
2024-08-12 13:34     ` Rob Herring (Arm)
2024-08-12 15:20     ` Rob Herring [this message]
2024-08-12 15:20       ` Rob Herring
2024-08-12 15:46   ` Rob Herring
2024-08-12 15:46     ` Rob Herring
2024-08-12 12:05 ` [PATCH 3/5] phy: stm32: Add support for STM32MP25 COMBOPHY Christian Bruel
2024-08-12 12:05   ` Christian Bruel
2024-08-12 20:14   ` kernel test robot
2024-08-12 20:14     ` kernel test robot
2024-08-12 20:24   ` kernel test robot
2024-08-12 20:24     ` kernel test robot
2024-08-12 12:05 ` [PATCH 4/5] arm64: dts: st: Add combophy node on stm32mp251 Christian Bruel
2024-08-12 12:05   ` Christian Bruel
2024-08-12 12:05 ` [PATCH 5/5] arm64: dts: st: Enable COMBOPHY on the stm32mp257f-ev1 board Christian Bruel
2024-08-12 12:05   ` Christian Bruel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240812152048.GA593866-robh@kernel.org \
    --to=robh@kernel.org \
    --cc=alexandre.torgue@foss.st.com \
    --cc=christian.bruel@foss.st.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fabrice.gasnier@foss.st.com \
    --cc=kishon@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.