From: Anand Moon <linux.amoon@gmail.com>
To: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Heiko Stuebner <heiko@sntech.de>
Cc: Anand Moon <linux.amoon@gmail.com>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5 6/6] phy: rockchip-pcie: Use regmap_read_poll_timeout for PCIe reference clk PLL status
Date: Mon, 2 Sep 2024 00:02:13 +0530 [thread overview]
Message-ID: <20240901183221.240361-7-linux.amoon@gmail.com> (raw)
In-Reply-To: <20240901183221.240361-1-linux.amoon@gmail.com>
Replace open-coded phy PCIe reference clk PLL status polling with
regmap_read_poll_timeout API. This change simplifies the code without
altering functionality.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v5: New patch in this seriese
---
drivers/phy/rockchip/phy-rockchip-pcie.c | 56 +++++++-----------------
1 file changed, 15 insertions(+), 41 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c
index a1b4b0323e9d..2c4d6f68f02a 100644
--- a/drivers/phy/rockchip/phy-rockchip-pcie.c
+++ b/drivers/phy/rockchip/phy-rockchip-pcie.c
@@ -162,7 +162,6 @@ static int rockchip_pcie_phy_power_on(struct phy *phy)
struct rockchip_pcie_phy *rk_phy = to_pcie_phy(inst);
int err = 0;
u32 status;
- unsigned long timeout;
mutex_lock(&rk_phy->pcie_mutex);
@@ -191,21 +190,11 @@ static int rockchip_pcie_phy_power_on(struct phy *phy)
* so we make it large enough here. And we use loop-break
* method which should not be harmful.
*/
- timeout = jiffies + msecs_to_jiffies(1000);
-
- err = -EINVAL;
- while (time_before(jiffies, timeout)) {
- regmap_read(rk_phy->reg_base,
- rk_phy->phy_data->pcie_status,
- &status);
- if (status & PHY_PLL_LOCKED) {
- dev_dbg(&phy->dev, "pll locked!\n");
- err = 0;
- break;
- }
- msleep(20);
- }
-
+ err = regmap_read_poll_timeout(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_status,
+ status,
+ status & PHY_PLL_LOCKED,
+ 200, 100000);
if (err) {
dev_err(&phy->dev, "pll lock timeout!\n");
goto err_pll_lock;
@@ -214,19 +203,11 @@ static int rockchip_pcie_phy_power_on(struct phy *phy)
phy_wr_cfg(rk_phy, PHY_CFG_CLK_TEST, PHY_CFG_SEPE_RATE);
phy_wr_cfg(rk_phy, PHY_CFG_CLK_SCC, PHY_CFG_PLL_100M);
- err = -ETIMEDOUT;
- while (time_before(jiffies, timeout)) {
- regmap_read(rk_phy->reg_base,
- rk_phy->phy_data->pcie_status,
- &status);
- if (!(status & PHY_PLL_OUTPUT)) {
- dev_dbg(&phy->dev, "pll output enable done!\n");
- err = 0;
- break;
- }
- msleep(20);
- }
-
+ err = regmap_read_poll_timeout(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_status,
+ status,
+ !(status & PHY_PLL_OUTPUT),
+ 200, 100000);
if (err) {
dev_err(&phy->dev, "pll output enable timeout!\n");
goto err_pll_lock;
@@ -236,19 +217,12 @@ static int rockchip_pcie_phy_power_on(struct phy *phy)
HIWORD_UPDATE(PHY_CFG_PLL_LOCK,
PHY_CFG_ADDR_MASK,
PHY_CFG_ADDR_SHIFT));
- err = -EINVAL;
- while (time_before(jiffies, timeout)) {
- regmap_read(rk_phy->reg_base,
- rk_phy->phy_data->pcie_status,
- &status);
- if (status & PHY_PLL_LOCKED) {
- dev_dbg(&phy->dev, "pll relocked!\n");
- err = 0;
- break;
- }
- msleep(20);
- }
+ err = regmap_read_poll_timeout(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_status,
+ status,
+ status & PHY_PLL_LOCKED,
+ 200, 100000);
if (err) {
dev_err(&phy->dev, "pll relock timeout!\n");
goto err_pll_lock;
--
2.44.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Heiko Stuebner <heiko@sntech.de>
Cc: Anand Moon <linux.amoon@gmail.com>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5 6/6] phy: rockchip-pcie: Use regmap_read_poll_timeout for PCIe reference clk PLL status
Date: Mon, 2 Sep 2024 00:02:13 +0530 [thread overview]
Message-ID: <20240901183221.240361-7-linux.amoon@gmail.com> (raw)
In-Reply-To: <20240901183221.240361-1-linux.amoon@gmail.com>
Replace open-coded phy PCIe reference clk PLL status polling with
regmap_read_poll_timeout API. This change simplifies the code without
altering functionality.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v5: New patch in this seriese
---
drivers/phy/rockchip/phy-rockchip-pcie.c | 56 +++++++-----------------
1 file changed, 15 insertions(+), 41 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c
index a1b4b0323e9d..2c4d6f68f02a 100644
--- a/drivers/phy/rockchip/phy-rockchip-pcie.c
+++ b/drivers/phy/rockchip/phy-rockchip-pcie.c
@@ -162,7 +162,6 @@ static int rockchip_pcie_phy_power_on(struct phy *phy)
struct rockchip_pcie_phy *rk_phy = to_pcie_phy(inst);
int err = 0;
u32 status;
- unsigned long timeout;
mutex_lock(&rk_phy->pcie_mutex);
@@ -191,21 +190,11 @@ static int rockchip_pcie_phy_power_on(struct phy *phy)
* so we make it large enough here. And we use loop-break
* method which should not be harmful.
*/
- timeout = jiffies + msecs_to_jiffies(1000);
-
- err = -EINVAL;
- while (time_before(jiffies, timeout)) {
- regmap_read(rk_phy->reg_base,
- rk_phy->phy_data->pcie_status,
- &status);
- if (status & PHY_PLL_LOCKED) {
- dev_dbg(&phy->dev, "pll locked!\n");
- err = 0;
- break;
- }
- msleep(20);
- }
-
+ err = regmap_read_poll_timeout(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_status,
+ status,
+ status & PHY_PLL_LOCKED,
+ 200, 100000);
if (err) {
dev_err(&phy->dev, "pll lock timeout!\n");
goto err_pll_lock;
@@ -214,19 +203,11 @@ static int rockchip_pcie_phy_power_on(struct phy *phy)
phy_wr_cfg(rk_phy, PHY_CFG_CLK_TEST, PHY_CFG_SEPE_RATE);
phy_wr_cfg(rk_phy, PHY_CFG_CLK_SCC, PHY_CFG_PLL_100M);
- err = -ETIMEDOUT;
- while (time_before(jiffies, timeout)) {
- regmap_read(rk_phy->reg_base,
- rk_phy->phy_data->pcie_status,
- &status);
- if (!(status & PHY_PLL_OUTPUT)) {
- dev_dbg(&phy->dev, "pll output enable done!\n");
- err = 0;
- break;
- }
- msleep(20);
- }
-
+ err = regmap_read_poll_timeout(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_status,
+ status,
+ !(status & PHY_PLL_OUTPUT),
+ 200, 100000);
if (err) {
dev_err(&phy->dev, "pll output enable timeout!\n");
goto err_pll_lock;
@@ -236,19 +217,12 @@ static int rockchip_pcie_phy_power_on(struct phy *phy)
HIWORD_UPDATE(PHY_CFG_PLL_LOCK,
PHY_CFG_ADDR_MASK,
PHY_CFG_ADDR_SHIFT));
- err = -EINVAL;
- while (time_before(jiffies, timeout)) {
- regmap_read(rk_phy->reg_base,
- rk_phy->phy_data->pcie_status,
- &status);
- if (status & PHY_PLL_LOCKED) {
- dev_dbg(&phy->dev, "pll relocked!\n");
- err = 0;
- break;
- }
- msleep(20);
- }
+ err = regmap_read_poll_timeout(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_status,
+ status,
+ status & PHY_PLL_LOCKED,
+ 200, 100000);
if (err) {
dev_err(&phy->dev, "pll relock timeout!\n");
goto err_pll_lock;
--
2.44.0
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Heiko Stuebner <heiko@sntech.de>
Cc: Anand Moon <linux.amoon@gmail.com>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5 6/6] phy: rockchip-pcie: Use regmap_read_poll_timeout for PCIe reference clk PLL status
Date: Mon, 2 Sep 2024 00:02:13 +0530 [thread overview]
Message-ID: <20240901183221.240361-7-linux.amoon@gmail.com> (raw)
In-Reply-To: <20240901183221.240361-1-linux.amoon@gmail.com>
Replace open-coded phy PCIe reference clk PLL status polling with
regmap_read_poll_timeout API. This change simplifies the code without
altering functionality.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v5: New patch in this seriese
---
drivers/phy/rockchip/phy-rockchip-pcie.c | 56 +++++++-----------------
1 file changed, 15 insertions(+), 41 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c
index a1b4b0323e9d..2c4d6f68f02a 100644
--- a/drivers/phy/rockchip/phy-rockchip-pcie.c
+++ b/drivers/phy/rockchip/phy-rockchip-pcie.c
@@ -162,7 +162,6 @@ static int rockchip_pcie_phy_power_on(struct phy *phy)
struct rockchip_pcie_phy *rk_phy = to_pcie_phy(inst);
int err = 0;
u32 status;
- unsigned long timeout;
mutex_lock(&rk_phy->pcie_mutex);
@@ -191,21 +190,11 @@ static int rockchip_pcie_phy_power_on(struct phy *phy)
* so we make it large enough here. And we use loop-break
* method which should not be harmful.
*/
- timeout = jiffies + msecs_to_jiffies(1000);
-
- err = -EINVAL;
- while (time_before(jiffies, timeout)) {
- regmap_read(rk_phy->reg_base,
- rk_phy->phy_data->pcie_status,
- &status);
- if (status & PHY_PLL_LOCKED) {
- dev_dbg(&phy->dev, "pll locked!\n");
- err = 0;
- break;
- }
- msleep(20);
- }
-
+ err = regmap_read_poll_timeout(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_status,
+ status,
+ status & PHY_PLL_LOCKED,
+ 200, 100000);
if (err) {
dev_err(&phy->dev, "pll lock timeout!\n");
goto err_pll_lock;
@@ -214,19 +203,11 @@ static int rockchip_pcie_phy_power_on(struct phy *phy)
phy_wr_cfg(rk_phy, PHY_CFG_CLK_TEST, PHY_CFG_SEPE_RATE);
phy_wr_cfg(rk_phy, PHY_CFG_CLK_SCC, PHY_CFG_PLL_100M);
- err = -ETIMEDOUT;
- while (time_before(jiffies, timeout)) {
- regmap_read(rk_phy->reg_base,
- rk_phy->phy_data->pcie_status,
- &status);
- if (!(status & PHY_PLL_OUTPUT)) {
- dev_dbg(&phy->dev, "pll output enable done!\n");
- err = 0;
- break;
- }
- msleep(20);
- }
-
+ err = regmap_read_poll_timeout(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_status,
+ status,
+ !(status & PHY_PLL_OUTPUT),
+ 200, 100000);
if (err) {
dev_err(&phy->dev, "pll output enable timeout!\n");
goto err_pll_lock;
@@ -236,19 +217,12 @@ static int rockchip_pcie_phy_power_on(struct phy *phy)
HIWORD_UPDATE(PHY_CFG_PLL_LOCK,
PHY_CFG_ADDR_MASK,
PHY_CFG_ADDR_SHIFT));
- err = -EINVAL;
- while (time_before(jiffies, timeout)) {
- regmap_read(rk_phy->reg_base,
- rk_phy->phy_data->pcie_status,
- &status);
- if (status & PHY_PLL_LOCKED) {
- dev_dbg(&phy->dev, "pll relocked!\n");
- err = 0;
- break;
- }
- msleep(20);
- }
+ err = regmap_read_poll_timeout(rk_phy->reg_base,
+ rk_phy->phy_data->pcie_status,
+ status,
+ status & PHY_PLL_LOCKED,
+ 200, 100000);
if (err) {
dev_err(&phy->dev, "pll relock timeout!\n");
goto err_pll_lock;
--
2.44.0
next prev parent reply other threads:[~2024-09-01 18:38 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20240901183221.240361-1-linux.amoon@gmail.com>
2024-09-01 18:32 ` [PATCH v5 1/6] PCI: rockchip: Simplify clock handling by using clk_bulk*() function Anand Moon
2024-09-01 18:32 ` Anand Moon
2024-09-27 8:17 ` Anand Moon
2024-09-27 8:17 ` Anand Moon
2024-09-27 18:22 ` Bjorn Helgaas
2024-09-27 18:22 ` Bjorn Helgaas
2024-09-28 3:53 ` Anand Moon
2024-09-28 3:53 ` Anand Moon
2024-09-01 18:32 ` [PATCH v5 2/6] PCI: rockchip: Simplify reset control handling by using reset_control_bulk*() function Anand Moon
2024-09-01 18:32 ` Anand Moon
2024-09-01 18:32 ` [PATCH v5 3/6] PCI: rockchip: Refactor rockchip_pcie_disable_clocks function signature Anand Moon
2024-09-01 18:32 ` Anand Moon
2024-09-01 18:32 ` [PATCH v5 4/6] phy: rockchip-pcie: Simplify error handling with dev_err_probe() Anand Moon
2024-09-01 18:32 ` Anand Moon
2024-09-01 18:32 ` Anand Moon
2024-09-01 18:32 ` [PATCH v5 5/6] phy: rockchip-pcie: Change to use devm_clk_get_enabled() helper Anand Moon
2024-09-01 18:32 ` Anand Moon
2024-09-01 18:32 ` Anand Moon
2024-09-01 18:32 ` Anand Moon [this message]
2024-09-01 18:32 ` [PATCH v5 6/6] phy: rockchip-pcie: Use regmap_read_poll_timeout for PCIe reference clk PLL status Anand Moon
2024-09-01 18:32 ` Anand Moon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240901183221.240361-7-linux.amoon@gmail.com \
--to=linux.amoon@gmail.com \
--cc=heiko@sntech.de \
--cc=kishon@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.