Re: [PATCH 15/15] iio: pressure: bmp280: use irq_get_trigger_type()

[Vasileios Amoiridis <vassilisamir@gmail.com>]

On Sun, Sep 01, 2024 at 02:59:50PM +0100, Jonathan Cameron wrote:
> From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> 
> Use irq_get_trigger_type() to replace getting the irq data then the
> type in two steps.
> 
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
>  drivers/iio/pressure/bmp280-core.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
> index da379230c837..b156dd763cf3 100644
> --- a/drivers/iio/pressure/bmp280-core.c
> +++ b/drivers/iio/pressure/bmp280-core.c
> @@ -2596,7 +2596,7 @@ static int bmp085_fetch_eoc_irq(struct device *dev,
>  	unsigned long irq_trig;
>  	int ret;
>  
> -	irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
> +	irq_trig = irq_get_trigger_type(irq);
>  	if (irq_trig != IRQF_TRIGGER_RISING) {
>  		dev_err(dev, "non-rising trigger given for EOC interrupt, trying to enforce it\n");
>  		irq_trig = IRQF_TRIGGER_RISING;
> -- 
> 2.46.0
> 

Hi Jonathan,

Tested-by: Vasileios Amoiridis <vassilisamir@gmail.com>