From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v1] ARM: dts: aspeed: yosemite4: Add i2c-mux for CPLD IOE on Spider Board
Date: Thu, 26 Sep 2024 10:41:33 +0800 [thread overview]
Message-ID: <20240926024133.3786712-1-Delphine_CC_Chiu@wiwynn.com> (raw)
From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Add I2C mux for CPLD IOE on Spider Board.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 67 +++++++++++++++++++
1 file changed, 67 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 98477792aa00..ea1a9c765483 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -17,6 +17,9 @@ aliases {
serial6 = &uart7;
serial7 = &uart8;
serial8 = &uart9;
+
+ i2c28 = &imux28;
+ i2c29 = &imux29;
};
chosen {
@@ -277,8 +280,72 @@ i2c-mux at 71 {
};
&i2c10 {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
bus-frequency = <400000>;
+ i2c-mux at 74 {
+ compatible = "nxp,pca9544";
+ reg = <0x74>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ imux28: i2c at 0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio at 20 {
+ compatible = "nxp,pca9506";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio at 21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio at 22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio at 23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio at 24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "","","","",
+ "NIC0_MAIN_PWR_EN",
+ "NIC1_MAIN_PWR_EN",
+ "NIC2_MAIN_PWR_EN",
+ "NIC3_MAIN_PWR_EN",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
+ };
+ };
+
+ imux29: i2c at 1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};
&i2c11 {
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: patrick@stwcx.xyz, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>,
Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1] ARM: dts: aspeed: yosemite4: Add i2c-mux for CPLD IOE on Spider Board
Date: Thu, 26 Sep 2024 10:41:33 +0800 [thread overview]
Message-ID: <20240926024133.3786712-1-Delphine_CC_Chiu@wiwynn.com> (raw)
From: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Add I2C mux for CPLD IOE on Spider Board.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 67 +++++++++++++++++++
1 file changed, 67 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 98477792aa00..ea1a9c765483 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -17,6 +17,9 @@ aliases {
serial6 = &uart7;
serial7 = &uart8;
serial8 = &uart9;
+
+ i2c28 = &imux28;
+ i2c29 = &imux29;
};
chosen {
@@ -277,8 +280,72 @@ i2c-mux@71 {
};
&i2c10 {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
bus-frequency = <400000>;
+ i2c-mux@74 {
+ compatible = "nxp,pca9544";
+ reg = <0x74>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ imux28: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio@20 {
+ compatible = "nxp,pca9506";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@21 {
+ compatible = "nxp,pca9506";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@22 {
+ compatible = "nxp,pca9506";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@23 {
+ compatible = "nxp,pca9506";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@24 {
+ compatible = "nxp,pca9506";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "","","","",
+ "NIC0_MAIN_PWR_EN",
+ "NIC1_MAIN_PWR_EN",
+ "NIC2_MAIN_PWR_EN",
+ "NIC3_MAIN_PWR_EN",
+ "","","","","","","","",
+ "","","","","","","","",
+ "","","","","","","","";
+ };
+ };
+
+ imux29: i2c@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};
&i2c11 {
--
2.25.1
next reply other threads:[~2024-09-26 2:41 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-26 2:41 Delphine CC Chiu [this message]
2024-09-26 2:41 ` [PATCH v1] ARM: dts: aspeed: yosemite4: Add i2c-mux for CPLD IOE on Spider Board Delphine CC Chiu
2024-09-27 5:57 ` Andrew Jeffery
2024-09-27 5:57 ` Andrew Jeffery
2024-09-27 9:24 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-09-27 9:24 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-09-28 2:33 ` Patrick Williams
2024-09-28 2:33 ` Patrick Williams
2024-09-29 23:44 ` Andrew Jeffery
2024-09-29 23:44 ` Andrew Jeffery
2024-09-30 1:47 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-09-30 1:47 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-09-30 2:36 ` Andrew Jeffery
2024-09-30 2:36 ` Andrew Jeffery
2024-09-30 5:55 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-09-30 5:55 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-09-30 6:02 ` Andrew Jeffery
2024-09-30 6:02 ` Andrew Jeffery
2024-09-30 6:08 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2024-09-30 6:08 ` Delphine_CC_Chiu/WYHQ/Wiwynn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240926024133.3786712-1-Delphine_CC_Chiu@wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.