From: Deepak Gupta <debug@rivosinc.com>
To: qemu-riscv@nongnu.org, qemu-devel@nongnu.org
Cc: palmer@dabbelt.com, Alistair.Francis@wdc.com, bmeng.cn@gmail.com,
liwei1518@gmail.com, dbarboza@ventanamicro.com,
zhiwei_liu@linux.alibaba.com, jim.shu@sifive.com,
kito.cheng@sifive.com, Deepak Gupta <debug@rivosinc.com>,
Andy Chiu <andy.chiu@sifive.com>,
Richard Henderson <richard.henderson@linaro.org>
Subject: [PATCH v15 04/21] target/riscv: save and restore elp state on priv transitions
Date: Thu, 3 Oct 2024 11:33:25 -0700 [thread overview]
Message-ID: <20241003183342.679249-5-debug@rivosinc.com> (raw)
In-Reply-To: <20241003183342.679249-1-debug@rivosinc.com>
elp state is recorded in *status on trap entry (less privilege to higher
privilege) and restored in elp from *status on trap exit (higher to less
privilege).
Additionally this patch introduces a forward cfi helper function to
determine if current privilege has forward cfi is enabled or not based on
*envcfg (for U, VU, S, VU, HS) or mseccfg csr (for M).
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
target/riscv/cpu.h | 1 +
target/riscv/cpu_helper.c | 54 +++++++++++++++++++++++++++++++++++++++
target/riscv/op_helper.c | 17 ++++++++++++
3 files changed, 72 insertions(+)
diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index e9f26b5121..6c5e199e72 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -547,6 +547,7 @@ void riscv_cpu_set_geilen(CPURISCVState *env, target_ulong geilen);
bool riscv_cpu_vector_enabled(CPURISCVState *env);
void riscv_cpu_set_virt_enabled(CPURISCVState *env, bool enable);
int riscv_env_mmu_index(CPURISCVState *env, bool ifetch);
+bool cpu_get_fcfien(CPURISCVState *env);
G_NORETURN void riscv_cpu_do_unaligned_access(CPUState *cs, vaddr addr,
MMUAccessType access_type,
int mmu_idx, uintptr_t retaddr);
diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
index a935377b4a..d7b776c556 100644
--- a/target/riscv/cpu_helper.c
+++ b/target/riscv/cpu_helper.c
@@ -33,6 +33,7 @@
#include "cpu_bits.h"
#include "debug.h"
#include "tcg/oversized-guest.h"
+#include "pmp.h"
int riscv_env_mmu_index(CPURISCVState *env, bool ifetch)
{
@@ -63,6 +64,33 @@ int riscv_env_mmu_index(CPURISCVState *env, bool ifetch)
#endif
}
+bool cpu_get_fcfien(CPURISCVState *env)
+{
+ /* no cfi extension, return false */
+ if (!env_archcpu(env)->cfg.ext_zicfilp) {
+ return false;
+ }
+
+ switch (env->priv) {
+ case PRV_U:
+ if (riscv_has_ext(env, RVS)) {
+ return env->senvcfg & SENVCFG_LPE;
+ }
+ return env->menvcfg & MENVCFG_LPE;
+#ifndef CONFIG_USER_ONLY
+ case PRV_S:
+ if (env->virt_enabled) {
+ return env->henvcfg & HENVCFG_LPE;
+ }
+ return env->menvcfg & MENVCFG_LPE;
+ case PRV_M:
+ return env->mseccfg & MSECCFG_MLPE;
+#endif
+ default:
+ g_assert_not_reached();
+ }
+}
+
void cpu_get_tb_cpu_state(CPURISCVState *env, vaddr *pc,
uint64_t *cs_base, uint32_t *pflags)
{
@@ -546,6 +574,15 @@ void riscv_cpu_swap_hypervisor_regs(CPURISCVState *env)
}
bool current_virt = env->virt_enabled;
+ /*
+ * If zicfilp extension available and henvcfg.LPE = 1,
+ * then apply SPELP mask on mstatus
+ */
+ if (env_archcpu(env)->cfg.ext_zicfilp &&
+ get_field(env->henvcfg, HENVCFG_LPE)) {
+ mstatus_mask |= SSTATUS_SPELP;
+ }
+
g_assert(riscv_has_ext(env, RVH));
if (current_virt) {
@@ -1760,6 +1797,11 @@ void riscv_cpu_do_interrupt(CPUState *cs)
if (env->priv <= PRV_S && cause < 64 &&
(((deleg >> cause) & 1) || s_injected || vs_injected)) {
/* handle the trap in S-mode */
+ /* save elp status */
+ if (cpu_get_fcfien(env)) {
+ env->mstatus = set_field(env->mstatus, MSTATUS_SPELP, env->elp);
+ }
+
if (riscv_has_ext(env, RVH)) {
uint64_t hdeleg = async ? env->hideleg : env->hedeleg;
@@ -1808,6 +1850,11 @@ void riscv_cpu_do_interrupt(CPUState *cs)
riscv_cpu_set_mode(env, PRV_S, virt);
} else {
/* handle the trap in M-mode */
+ /* save elp status */
+ if (cpu_get_fcfien(env)) {
+ env->mstatus = set_field(env->mstatus, MSTATUS_MPELP, env->elp);
+ }
+
if (riscv_has_ext(env, RVH)) {
if (env->virt_enabled) {
riscv_cpu_swap_hypervisor_regs(env);
@@ -1839,6 +1886,13 @@ void riscv_cpu_do_interrupt(CPUState *cs)
riscv_cpu_set_mode(env, PRV_M, virt);
}
+ /*
+ * Interrupt/exception/trap delivery is asynchronous event and as per
+ * zicfilp spec CPU should clear up the ELP state. No harm in clearing
+ * unconditionally.
+ */
+ env->elp = false;
+
/*
* NOTE: it is not necessary to yield load reservations here. It is only
* necessary for an SC from "another hart" to cause a load reservation
diff --git a/target/riscv/op_helper.c b/target/riscv/op_helper.c
index 25a5263573..eddedacf4b 100644
--- a/target/riscv/op_helper.c
+++ b/target/riscv/op_helper.c
@@ -309,6 +309,15 @@ target_ulong helper_sret(CPURISCVState *env)
riscv_cpu_set_mode(env, prev_priv, prev_virt);
+ /*
+ * If forward cfi enabled for new priv, restore elp status
+ * and clear spelp in mstatus
+ */
+ if (cpu_get_fcfien(env)) {
+ env->elp = get_field(env->mstatus, MSTATUS_SPELP);
+ }
+ env->mstatus = set_field(env->mstatus, MSTATUS_SPELP, 0);
+
return retpc;
}
@@ -349,6 +358,14 @@ target_ulong helper_mret(CPURISCVState *env)
}
riscv_cpu_set_mode(env, prev_priv, prev_virt);
+ /*
+ * If forward cfi enabled for new priv, restore elp status
+ * and clear mpelp in mstatus
+ */
+ if (cpu_get_fcfien(env)) {
+ env->elp = get_field(env->mstatus, MSTATUS_MPELP);
+ }
+ env->mstatus = set_field(env->mstatus, MSTATUS_MPELP, 0);
return retpc;
}
--
2.45.0
next prev parent reply other threads:[~2024-10-03 18:36 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-03 18:33 [PATCH v15 00/21] riscv support for control flow integrity extensions Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 01/21] target/riscv: expose *envcfg csr and priv to qemu-user as well Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 02/21] target/riscv: Add zicfilp extension Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 03/21] target/riscv: Introduce elp state and enabling controls for zicfilp Deepak Gupta
2024-10-03 18:33 ` Deepak Gupta [this message]
2024-10-03 18:33 ` [PATCH v15 05/21] target/riscv: additional code information for sw check Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 06/21] target/riscv: tracking indirect branches (fcfi) for zicfilp Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 07/21] target/riscv: zicfilp `lpad` impl and branch tracking Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 08/21] disas/riscv: enable `lpad` disassembly Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 09/21] target/riscv: Expose zicfilp extension as a cpu property Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 10/21] target/riscv: Add zicfiss extension Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 11/21] target/riscv: introduce ssp and enabling controls for zicfiss Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 12/21] target/riscv: tb flag for shadow stack instructions Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 13/21] target/riscv: mmu changes for zicfiss shadow stack protection Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 14/21] target/riscv: disallow probe accesses to shadow stack Deepak Gupta
2024-10-04 0:36 ` Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 15/21] target/riscv: AMO operations always raise store/AMO fault Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 16/21] target/riscv: update `decode_save_opc` to store extra word2 Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 17/21] target/riscv: implement zicfiss instructions Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 18/21] target/riscv: compressed encodings for sspush and sspopchk Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 19/21] disas/riscv: enable disassembly for zicfiss instructions Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 20/21] disas/riscv: enable disassembly for compressed sspush/sspopchk Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 21/21] target/riscv: Expose zicfiss extension as a cpu property Deepak Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241003183342.679249-5-debug@rivosinc.com \
--to=debug@rivosinc.com \
--cc=Alistair.Francis@wdc.com \
--cc=andy.chiu@sifive.com \
--cc=bmeng.cn@gmail.com \
--cc=dbarboza@ventanamicro.com \
--cc=jim.shu@sifive.com \
--cc=kito.cheng@sifive.com \
--cc=liwei1518@gmail.com \
--cc=palmer@dabbelt.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=zhiwei_liu@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.