From: Deepak Gupta <debug@rivosinc.com>
To: qemu-riscv@nongnu.org, qemu-devel@nongnu.org
Cc: palmer@dabbelt.com, Alistair.Francis@wdc.com, bmeng.cn@gmail.com,
liwei1518@gmail.com, dbarboza@ventanamicro.com,
zhiwei_liu@linux.alibaba.com, jim.shu@sifive.com,
kito.cheng@sifive.com, Deepak Gupta <debug@rivosinc.com>,
Andy Chiu <andy.chiu@sifive.com>,
Richard Henderson <richard.henderson@linaro.org>,
Alistair Francis <alistair.francis@wdc.com>
Subject: [PATCH v15 07/21] target/riscv: zicfilp `lpad` impl and branch tracking
Date: Thu, 3 Oct 2024 11:33:28 -0700 [thread overview]
Message-ID: <20241003183342.679249-8-debug@rivosinc.com> (raw)
In-Reply-To: <20241003183342.679249-1-debug@rivosinc.com>
Implements setting lp expected when `jalr` is encountered and implements
`lpad` instruction of zicfilp. `lpad` instruction is taken out of
auipc x0, <imm_20>. This is an existing HINTNOP space. If `lpad` is
target of an indirect branch, cpu checks for 20 bit value in x7 upper
with 20 bit value embedded in `lpad`. If they don't match, cpu raises a
sw check exception with tval = 2.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Co-developed-by: Jim Shu <jim.shu@sifive.com>
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---
target/riscv/cpu_user.h | 1 +
target/riscv/insn32.decode | 5 ++-
target/riscv/insn_trans/trans_rvi.c.inc | 55 +++++++++++++++++++++++++
3 files changed, 60 insertions(+), 1 deletion(-)
diff --git a/target/riscv/cpu_user.h b/target/riscv/cpu_user.h
index 02afad608b..e6927ff847 100644
--- a/target/riscv/cpu_user.h
+++ b/target/riscv/cpu_user.h
@@ -15,5 +15,6 @@
#define xA6 16
#define xA7 17 /* syscall number for RVI ABI */
#define xT0 5 /* syscall number for RVE ABI */
+#define xT2 7
#endif
diff --git a/target/riscv/insn32.decode b/target/riscv/insn32.decode
index c45b8fa1d8..27108b992b 100644
--- a/target/riscv/insn32.decode
+++ b/target/riscv/insn32.decode
@@ -123,7 +123,10 @@ sfence_vm 0001000 00100 ..... 000 00000 1110011 @sfence_vm
# *** RV32I Base Instruction Set ***
lui .................... ..... 0110111 @u
-auipc .................... ..... 0010111 @u
+{
+ lpad label:20 00000 0010111
+ auipc .................... ..... 0010111 @u
+}
jal .................... ..... 1101111 @j
jalr ............ ..... 000 ..... 1100111 @i
beq ....... ..... ..... 000 ..... 1100011 @b
diff --git a/target/riscv/insn_trans/trans_rvi.c.inc b/target/riscv/insn_trans/trans_rvi.c.inc
index fab5c06719..638fc0fb7b 100644
--- a/target/riscv/insn_trans/trans_rvi.c.inc
+++ b/target/riscv/insn_trans/trans_rvi.c.inc
@@ -36,6 +36,49 @@ static bool trans_lui(DisasContext *ctx, arg_lui *a)
return true;
}
+static bool trans_lpad(DisasContext *ctx, arg_lpad *a)
+{
+ /*
+ * fcfi_lp_expected can set only if fcfi was eanbled.
+ * translate further only if fcfi_lp_expected set.
+ * lpad comes from NOP space anyways, so return true if
+ * fcfi_lp_expected is false.
+ */
+ if (!ctx->fcfi_lp_expected) {
+ return true;
+ }
+
+ ctx->fcfi_lp_expected = false;
+ if ((ctx->base.pc_next) & 0x3) {
+ /*
+ * misaligned, according to spec we should raise sw check exception
+ */
+ tcg_gen_st_tl(tcg_constant_tl(RISCV_EXCP_SW_CHECK_FCFI_TVAL),
+ tcg_env, offsetof(CPURISCVState, sw_check_code));
+ gen_helper_raise_exception(tcg_env,
+ tcg_constant_i32(RISCV_EXCP_SW_CHECK));
+ return true;
+ }
+
+ /* per spec, label check performed only when embedded label non-zero */
+ if (a->label != 0) {
+ TCGLabel *skip = gen_new_label();
+ TCGv tmp = tcg_temp_new();
+ tcg_gen_extract_tl(tmp, get_gpr(ctx, xT2, EXT_NONE), 12, 20);
+ tcg_gen_brcondi_tl(TCG_COND_EQ, tmp, a->label, skip);
+ tcg_gen_st_tl(tcg_constant_tl(RISCV_EXCP_SW_CHECK_FCFI_TVAL),
+ tcg_env, offsetof(CPURISCVState, sw_check_code));
+ gen_helper_raise_exception(tcg_env,
+ tcg_constant_i32(RISCV_EXCP_SW_CHECK));
+ gen_set_label(skip);
+ }
+
+ tcg_gen_st8_tl(tcg_constant_tl(0), tcg_env,
+ offsetof(CPURISCVState, elp));
+
+ return true;
+}
+
static bool trans_auipc(DisasContext *ctx, arg_auipc *a)
{
TCGv target_pc = dest_gpr(ctx, a->rd);
@@ -75,6 +118,18 @@ static bool trans_jalr(DisasContext *ctx, arg_jalr *a)
gen_set_gpr(ctx, a->rd, succ_pc);
tcg_gen_mov_tl(cpu_pc, target_pc);
+ if (ctx->fcfi_enabled) {
+ /*
+ * return from functions (i.e. rs1 == xRA || rs1 == xT0) are not
+ * tracked. zicfilp introduces sw guarded branch as well. sw guarded
+ * branch are not tracked. rs1 == xT2 is a sw guarded branch.
+ */
+ if (a->rs1 != xRA && a->rs1 != xT0 && a->rs1 != xT2) {
+ tcg_gen_st8_tl(tcg_constant_tl(1),
+ tcg_env, offsetof(CPURISCVState, elp));
+ }
+ }
+
lookup_and_goto_ptr(ctx);
if (misaligned) {
--
2.45.0
next prev parent reply other threads:[~2024-10-03 18:37 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-03 18:33 [PATCH v15 00/21] riscv support for control flow integrity extensions Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 01/21] target/riscv: expose *envcfg csr and priv to qemu-user as well Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 02/21] target/riscv: Add zicfilp extension Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 03/21] target/riscv: Introduce elp state and enabling controls for zicfilp Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 04/21] target/riscv: save and restore elp state on priv transitions Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 05/21] target/riscv: additional code information for sw check Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 06/21] target/riscv: tracking indirect branches (fcfi) for zicfilp Deepak Gupta
2024-10-03 18:33 ` Deepak Gupta [this message]
2024-10-03 18:33 ` [PATCH v15 08/21] disas/riscv: enable `lpad` disassembly Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 09/21] target/riscv: Expose zicfilp extension as a cpu property Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 10/21] target/riscv: Add zicfiss extension Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 11/21] target/riscv: introduce ssp and enabling controls for zicfiss Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 12/21] target/riscv: tb flag for shadow stack instructions Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 13/21] target/riscv: mmu changes for zicfiss shadow stack protection Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 14/21] target/riscv: disallow probe accesses to shadow stack Deepak Gupta
2024-10-04 0:36 ` Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 15/21] target/riscv: AMO operations always raise store/AMO fault Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 16/21] target/riscv: update `decode_save_opc` to store extra word2 Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 17/21] target/riscv: implement zicfiss instructions Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 18/21] target/riscv: compressed encodings for sspush and sspopchk Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 19/21] disas/riscv: enable disassembly for zicfiss instructions Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 20/21] disas/riscv: enable disassembly for compressed sspush/sspopchk Deepak Gupta
2024-10-03 18:33 ` [PATCH v15 21/21] target/riscv: Expose zicfiss extension as a cpu property Deepak Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241003183342.679249-8-debug@rivosinc.com \
--to=debug@rivosinc.com \
--cc=Alistair.Francis@wdc.com \
--cc=andy.chiu@sifive.com \
--cc=bmeng.cn@gmail.com \
--cc=dbarboza@ventanamicro.com \
--cc=jim.shu@sifive.com \
--cc=kito.cheng@sifive.com \
--cc=liwei1518@gmail.com \
--cc=palmer@dabbelt.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=zhiwei_liu@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.