From: "Björn Töpel" <bjorn@kernel.org>
To: Tejun Heo <tj@kernel.org>, David Vernet <void@manifault.com>,
Shuah Khan <shuah@kernel.org>,
linux-kernel@vger.kernel.org, linux-kselftest@vger.kernel.org,
Mark Brown <broonie@kernel.org>
Cc: "Björn Töpel" <bjorn@rivosinc.com>,
bpf@vger.kernel.org, linux-riscv@lists.infradead.org,
"Anders Roxell" <anders.roxell@linaro.org>
Subject: [PATCH v3] selftests: sched_ext: Add sched_ext as proper selftest target
Date: Tue, 8 Oct 2024 17:35:18 +0200 [thread overview]
Message-ID: <20241008153519.1270862-1-bjorn@kernel.org> (raw)
From: Björn Töpel <bjorn@rivosinc.com>
The sched_ext selftests is missing proper cross-compilation support, a
proper target entry, and out-of-tree build support.
When building the kselftest suite, e.g.:
make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- \
TARGETS=sched_ext SKIP_TARGETS="" O=/output/foo \
-C tools/testing/selftests install
or:
make ARCH=arm64 LLVM=1 TARGETS=sched_ext SKIP_TARGETS="" \
O=/output/foo -C tools/testing/selftests install
The expectation is that the sched_ext is included, cross-built, the
correct toolchain is picked up, and placed into /output/foo.
In contrast to the BPF selftests, the sched_ext suite does not use
bpftool at test run-time, so it is sufficient to build bpftool for the
build host only.
Add ARCH, CROSS_COMPILE, OUTPUT, and TARGETS support to the sched_ext
selftest. Also, remove some variables that were unused by the
Makefile.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
---
v3: * Always build a build host version of bpftool (Mark)
* Make sure LLVM style "ARCH only" cross-build works (Mark)
v2: * Removed the duplicated LLVM prefix parsing (David)
* Made sure make clean didn't do a complete mess (David)
* Added sched_ext to default skip (Shuah)
---
tools/testing/selftests/Makefile | 9 +--
tools/testing/selftests/sched_ext/Makefile | 73 ++++++++++------------
2 files changed, 38 insertions(+), 44 deletions(-)
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index b38199965f99..363d031a16f7 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -88,6 +88,7 @@ TARGETS += rlimits
TARGETS += rseq
TARGETS += rtc
TARGETS += rust
+TARGETS += sched_ext
TARGETS += seccomp
TARGETS += sgx
TARGETS += sigaltstack
@@ -129,10 +130,10 @@ ifeq ($(filter net/lib,$(TARGETS)),)
endif
endif
-# User can optionally provide a TARGETS skiplist. By default we skip
-# BPF since it has cutting edge build time dependencies which require
-# more effort to install.
-SKIP_TARGETS ?= bpf
+# User can optionally provide a TARGETS skiplist. By default we skip
+# targets using BPF since it has cutting edge build time dependencies
+# which require more effort to install.
+SKIP_TARGETS ?= bpf sched_ext
ifneq ($(SKIP_TARGETS),)
TMP := $(filter-out $(SKIP_TARGETS), $(TARGETS))
override TARGETS := $(TMP)
diff --git a/tools/testing/selftests/sched_ext/Makefile b/tools/testing/selftests/sched_ext/Makefile
index 0754a2c110a1..06ae9c107049 100644
--- a/tools/testing/selftests/sched_ext/Makefile
+++ b/tools/testing/selftests/sched_ext/Makefile
@@ -3,24 +3,13 @@
include ../../../build/Build.include
include ../../../scripts/Makefile.arch
include ../../../scripts/Makefile.include
+
+TEST_GEN_PROGS := runner
+
+# override lib.mk's default rules
+OVERRIDE_TARGETS := 1
include ../lib.mk
-ifneq ($(LLVM),)
-ifneq ($(filter %/,$(LLVM)),)
-LLVM_PREFIX := $(LLVM)
-else ifneq ($(filter -%,$(LLVM)),)
-LLVM_SUFFIX := $(LLVM)
-endif
-
-CC := $(LLVM_PREFIX)clang$(LLVM_SUFFIX) $(CLANG_FLAGS) -fintegrated-as
-else
-CC := gcc
-endif # LLVM
-
-ifneq ($(CROSS_COMPILE),)
-$(error CROSS_COMPILE not supported for scx selftests)
-endif # CROSS_COMPILE
-
CURDIR := $(abspath .)
REPOROOT := $(abspath ../../../..)
TOOLSDIR := $(REPOROOT)/tools
@@ -34,18 +23,23 @@ GENHDR := $(GENDIR)/autoconf.h
SCXTOOLSDIR := $(TOOLSDIR)/sched_ext
SCXTOOLSINCDIR := $(TOOLSDIR)/sched_ext/include
-OUTPUT_DIR := $(CURDIR)/build
+OUTPUT_DIR := $(OUTPUT)/build
OBJ_DIR := $(OUTPUT_DIR)/obj
INCLUDE_DIR := $(OUTPUT_DIR)/include
BPFOBJ_DIR := $(OBJ_DIR)/libbpf
SCXOBJ_DIR := $(OBJ_DIR)/sched_ext
BPFOBJ := $(BPFOBJ_DIR)/libbpf.a
LIBBPF_OUTPUT := $(OBJ_DIR)/libbpf/libbpf.a
-DEFAULT_BPFTOOL := $(OUTPUT_DIR)/sbin/bpftool
-HOST_BUILD_DIR := $(OBJ_DIR)
-HOST_OUTPUT_DIR := $(OUTPUT_DIR)
-VMLINUX_BTF_PATHS ?= ../../../../vmlinux \
+DEFAULT_BPFTOOL := $(OUTPUT_DIR)/host/sbin/bpftool
+HOST_OBJ_DIR := $(OBJ_DIR)/host/bpftool
+HOST_LIBBPF_OUTPUT := $(OBJ_DIR)/host/libbpf/
+HOST_LIBBPF_DESTDIR := $(OUTPUT_DIR)/host/
+HOST_DESTDIR := $(OUTPUT_DIR)/host/
+
+VMLINUX_BTF_PATHS ?= $(if $(O),$(O)/vmlinux) \
+ $(if $(KBUILD_OUTPUT),$(KBUILD_OUTPUT)/vmlinux) \
+ ../../../../vmlinux \
/sys/kernel/btf/vmlinux \
/boot/vmlinux-$(shell uname -r)
VMLINUX_BTF ?= $(abspath $(firstword $(wildcard $(VMLINUX_BTF_PATHS))))
@@ -80,17 +74,23 @@ IS_LITTLE_ENDIAN = $(shell $(CC) -dM -E - </dev/null | \
# Use '-idirafter': Don't interfere with include mechanics except where the
# build would have failed anyways.
define get_sys_includes
-$(shell $(1) -v -E - </dev/null 2>&1 \
+$(shell $(1) $(2) -v -E - </dev/null 2>&1 \
| sed -n '/<...> search starts here:/,/End of search list./{ s| \(/.*\)|-idirafter \1|p }') \
-$(shell $(1) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}')
+$(shell $(1) $(2) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}')
endef
+ifneq ($(CROSS_COMPILE),)
+CLANG_TARGET_ARCH = --target=$(notdir $(CROSS_COMPILE:%-=%))
+endif
+
+CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG),$(CLANG_TARGET_ARCH))
+
BPF_CFLAGS = -g -D__TARGET_ARCH_$(SRCARCH) \
$(if $(IS_LITTLE_ENDIAN),-mlittle-endian,-mbig-endian) \
-I$(CURDIR)/include -I$(CURDIR)/include/bpf-compat \
-I$(INCLUDE_DIR) -I$(APIDIR) -I$(SCXTOOLSINCDIR) \
-I$(REPOROOT)/include \
- $(call get_sys_includes,$(CLANG)) \
+ $(CLANG_SYS_INCLUDES) \
-Wall -Wno-compare-distinct-pointer-types \
-Wno-incompatible-function-pointer-types \
-O2 -mcpu=v3
@@ -98,7 +98,7 @@ BPF_CFLAGS = -g -D__TARGET_ARCH_$(SRCARCH) \
# sort removes libbpf duplicates when not cross-building
MAKE_DIRS := $(sort $(OBJ_DIR)/libbpf $(OBJ_DIR)/libbpf \
$(OBJ_DIR)/bpftool $(OBJ_DIR)/resolve_btfids \
- $(INCLUDE_DIR) $(SCXOBJ_DIR))
+ $(HOST_OBJ_DIR) $(INCLUDE_DIR) $(SCXOBJ_DIR))
$(MAKE_DIRS):
$(call msg,MKDIR,,$@)
@@ -108,18 +108,19 @@ $(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \
$(APIDIR)/linux/bpf.h \
| $(OBJ_DIR)/libbpf
$(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(OBJ_DIR)/libbpf/ \
+ ARCH=$(ARCH) CC="$(CC)" CROSS_COMPILE=$(CROSS_COMPILE) \
EXTRA_CFLAGS='-g -O0 -fPIC' \
DESTDIR=$(OUTPUT_DIR) prefix= all install_headers
$(DEFAULT_BPFTOOL): $(wildcard $(BPFTOOLDIR)/*.[ch] $(BPFTOOLDIR)/Makefile) \
- $(LIBBPF_OUTPUT) | $(OBJ_DIR)/bpftool
+ $(LIBBPF_OUTPUT) | $(HOST_OBJ_DIR)
$(Q)$(MAKE) $(submake_extras) -C $(BPFTOOLDIR) \
ARCH= CROSS_COMPILE= CC=$(HOSTCC) LD=$(HOSTLD) \
EXTRA_CFLAGS='-g -O0' \
- OUTPUT=$(OBJ_DIR)/bpftool/ \
- LIBBPF_OUTPUT=$(OBJ_DIR)/libbpf/ \
- LIBBPF_DESTDIR=$(OUTPUT_DIR)/ \
- prefix= DESTDIR=$(OUTPUT_DIR)/ install-bin
+ OUTPUT=$(HOST_OBJ_DIR)/ \
+ LIBBPF_OUTPUT=$(HOST_LIBBPF_OUTPUT) \
+ LIBBPF_DESTDIR=$(HOST_LIBBPF_DESTDIR) \
+ prefix= DESTDIR=$(HOST_DESTDIR) install-bin
$(INCLUDE_DIR)/vmlinux.h: $(VMLINUX_BTF) $(BPFTOOL) | $(INCLUDE_DIR)
ifeq ($(VMLINUX_H),)
@@ -150,9 +151,7 @@ $(INCLUDE_DIR)/%.bpf.skel.h: $(SCXOBJ_DIR)/%.bpf.o $(INCLUDE_DIR)/vmlinux.h $(BP
override define CLEAN
rm -rf $(OUTPUT_DIR)
- rm -f *.o *.bpf.o *.bpf.skel.h *.bpf.subskel.h
rm -f $(TEST_GEN_PROGS)
- rm -f runner
endef
# Every testcase takes all of the BPF progs are dependencies by default. This
@@ -196,21 +195,15 @@ $(SCXOBJ_DIR)/runner.o: runner.c | $(SCXOBJ_DIR)
# function doesn't support using implicit rules otherwise.
$(testcase-targets): $(SCXOBJ_DIR)/%.o: %.c $(SCXOBJ_DIR)/runner.o $(all_test_bpfprogs) | $(SCXOBJ_DIR)
$(eval test=$(patsubst %.o,%.c,$(notdir $@)))
- $(CC) $(CFLAGS) -c $< -o $@ $(SCXOBJ_DIR)/runner.o
+ $(CC) $(CFLAGS) -c $< -o $@
$(SCXOBJ_DIR)/util.o: util.c | $(SCXOBJ_DIR)
$(CC) $(CFLAGS) -c $< -o $@
-runner: $(SCXOBJ_DIR)/runner.o $(SCXOBJ_DIR)/util.o $(BPFOBJ) $(testcase-targets)
+$(OUTPUT)/runner: $(SCXOBJ_DIR)/runner.o $(SCXOBJ_DIR)/util.o $(BPFOBJ) $(testcase-targets)
@echo "$(testcase-targets)"
$(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS)
-TEST_GEN_PROGS := runner
-
-all: runner
-
-.PHONY: all clean help
-
.DEFAULT_GOAL := all
.DELETE_ON_ERROR:
base-commit: 87d6aab2389e5ce0197d8257d5f8ee965a67c4cd
--
2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: "Björn Töpel" <bjorn@kernel.org>
To: Tejun Heo <tj@kernel.org>, David Vernet <void@manifault.com>,
Shuah Khan <shuah@kernel.org>,
linux-kernel@vger.kernel.org, linux-kselftest@vger.kernel.org,
Mark Brown <broonie@kernel.org>
Cc: "Björn Töpel" <bjorn@rivosinc.com>,
bpf@vger.kernel.org, linux-riscv@lists.infradead.org,
"Anders Roxell" <anders.roxell@linaro.org>
Subject: [PATCH v3] selftests: sched_ext: Add sched_ext as proper selftest target
Date: Tue, 8 Oct 2024 17:35:18 +0200 [thread overview]
Message-ID: <20241008153519.1270862-1-bjorn@kernel.org> (raw)
From: Björn Töpel <bjorn@rivosinc.com>
The sched_ext selftests is missing proper cross-compilation support, a
proper target entry, and out-of-tree build support.
When building the kselftest suite, e.g.:
make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- \
TARGETS=sched_ext SKIP_TARGETS="" O=/output/foo \
-C tools/testing/selftests install
or:
make ARCH=arm64 LLVM=1 TARGETS=sched_ext SKIP_TARGETS="" \
O=/output/foo -C tools/testing/selftests install
The expectation is that the sched_ext is included, cross-built, the
correct toolchain is picked up, and placed into /output/foo.
In contrast to the BPF selftests, the sched_ext suite does not use
bpftool at test run-time, so it is sufficient to build bpftool for the
build host only.
Add ARCH, CROSS_COMPILE, OUTPUT, and TARGETS support to the sched_ext
selftest. Also, remove some variables that were unused by the
Makefile.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
---
v3: * Always build a build host version of bpftool (Mark)
* Make sure LLVM style "ARCH only" cross-build works (Mark)
v2: * Removed the duplicated LLVM prefix parsing (David)
* Made sure make clean didn't do a complete mess (David)
* Added sched_ext to default skip (Shuah)
---
tools/testing/selftests/Makefile | 9 +--
tools/testing/selftests/sched_ext/Makefile | 73 ++++++++++------------
2 files changed, 38 insertions(+), 44 deletions(-)
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index b38199965f99..363d031a16f7 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -88,6 +88,7 @@ TARGETS += rlimits
TARGETS += rseq
TARGETS += rtc
TARGETS += rust
+TARGETS += sched_ext
TARGETS += seccomp
TARGETS += sgx
TARGETS += sigaltstack
@@ -129,10 +130,10 @@ ifeq ($(filter net/lib,$(TARGETS)),)
endif
endif
-# User can optionally provide a TARGETS skiplist. By default we skip
-# BPF since it has cutting edge build time dependencies which require
-# more effort to install.
-SKIP_TARGETS ?= bpf
+# User can optionally provide a TARGETS skiplist. By default we skip
+# targets using BPF since it has cutting edge build time dependencies
+# which require more effort to install.
+SKIP_TARGETS ?= bpf sched_ext
ifneq ($(SKIP_TARGETS),)
TMP := $(filter-out $(SKIP_TARGETS), $(TARGETS))
override TARGETS := $(TMP)
diff --git a/tools/testing/selftests/sched_ext/Makefile b/tools/testing/selftests/sched_ext/Makefile
index 0754a2c110a1..06ae9c107049 100644
--- a/tools/testing/selftests/sched_ext/Makefile
+++ b/tools/testing/selftests/sched_ext/Makefile
@@ -3,24 +3,13 @@
include ../../../build/Build.include
include ../../../scripts/Makefile.arch
include ../../../scripts/Makefile.include
+
+TEST_GEN_PROGS := runner
+
+# override lib.mk's default rules
+OVERRIDE_TARGETS := 1
include ../lib.mk
-ifneq ($(LLVM),)
-ifneq ($(filter %/,$(LLVM)),)
-LLVM_PREFIX := $(LLVM)
-else ifneq ($(filter -%,$(LLVM)),)
-LLVM_SUFFIX := $(LLVM)
-endif
-
-CC := $(LLVM_PREFIX)clang$(LLVM_SUFFIX) $(CLANG_FLAGS) -fintegrated-as
-else
-CC := gcc
-endif # LLVM
-
-ifneq ($(CROSS_COMPILE),)
-$(error CROSS_COMPILE not supported for scx selftests)
-endif # CROSS_COMPILE
-
CURDIR := $(abspath .)
REPOROOT := $(abspath ../../../..)
TOOLSDIR := $(REPOROOT)/tools
@@ -34,18 +23,23 @@ GENHDR := $(GENDIR)/autoconf.h
SCXTOOLSDIR := $(TOOLSDIR)/sched_ext
SCXTOOLSINCDIR := $(TOOLSDIR)/sched_ext/include
-OUTPUT_DIR := $(CURDIR)/build
+OUTPUT_DIR := $(OUTPUT)/build
OBJ_DIR := $(OUTPUT_DIR)/obj
INCLUDE_DIR := $(OUTPUT_DIR)/include
BPFOBJ_DIR := $(OBJ_DIR)/libbpf
SCXOBJ_DIR := $(OBJ_DIR)/sched_ext
BPFOBJ := $(BPFOBJ_DIR)/libbpf.a
LIBBPF_OUTPUT := $(OBJ_DIR)/libbpf/libbpf.a
-DEFAULT_BPFTOOL := $(OUTPUT_DIR)/sbin/bpftool
-HOST_BUILD_DIR := $(OBJ_DIR)
-HOST_OUTPUT_DIR := $(OUTPUT_DIR)
-VMLINUX_BTF_PATHS ?= ../../../../vmlinux \
+DEFAULT_BPFTOOL := $(OUTPUT_DIR)/host/sbin/bpftool
+HOST_OBJ_DIR := $(OBJ_DIR)/host/bpftool
+HOST_LIBBPF_OUTPUT := $(OBJ_DIR)/host/libbpf/
+HOST_LIBBPF_DESTDIR := $(OUTPUT_DIR)/host/
+HOST_DESTDIR := $(OUTPUT_DIR)/host/
+
+VMLINUX_BTF_PATHS ?= $(if $(O),$(O)/vmlinux) \
+ $(if $(KBUILD_OUTPUT),$(KBUILD_OUTPUT)/vmlinux) \
+ ../../../../vmlinux \
/sys/kernel/btf/vmlinux \
/boot/vmlinux-$(shell uname -r)
VMLINUX_BTF ?= $(abspath $(firstword $(wildcard $(VMLINUX_BTF_PATHS))))
@@ -80,17 +74,23 @@ IS_LITTLE_ENDIAN = $(shell $(CC) -dM -E - </dev/null | \
# Use '-idirafter': Don't interfere with include mechanics except where the
# build would have failed anyways.
define get_sys_includes
-$(shell $(1) -v -E - </dev/null 2>&1 \
+$(shell $(1) $(2) -v -E - </dev/null 2>&1 \
| sed -n '/<...> search starts here:/,/End of search list./{ s| \(/.*\)|-idirafter \1|p }') \
-$(shell $(1) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}')
+$(shell $(1) $(2) -dM -E - </dev/null | grep '__riscv_xlen ' | awk '{printf("-D__riscv_xlen=%d -D__BITS_PER_LONG=%d", $$3, $$3)}')
endef
+ifneq ($(CROSS_COMPILE),)
+CLANG_TARGET_ARCH = --target=$(notdir $(CROSS_COMPILE:%-=%))
+endif
+
+CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG),$(CLANG_TARGET_ARCH))
+
BPF_CFLAGS = -g -D__TARGET_ARCH_$(SRCARCH) \
$(if $(IS_LITTLE_ENDIAN),-mlittle-endian,-mbig-endian) \
-I$(CURDIR)/include -I$(CURDIR)/include/bpf-compat \
-I$(INCLUDE_DIR) -I$(APIDIR) -I$(SCXTOOLSINCDIR) \
-I$(REPOROOT)/include \
- $(call get_sys_includes,$(CLANG)) \
+ $(CLANG_SYS_INCLUDES) \
-Wall -Wno-compare-distinct-pointer-types \
-Wno-incompatible-function-pointer-types \
-O2 -mcpu=v3
@@ -98,7 +98,7 @@ BPF_CFLAGS = -g -D__TARGET_ARCH_$(SRCARCH) \
# sort removes libbpf duplicates when not cross-building
MAKE_DIRS := $(sort $(OBJ_DIR)/libbpf $(OBJ_DIR)/libbpf \
$(OBJ_DIR)/bpftool $(OBJ_DIR)/resolve_btfids \
- $(INCLUDE_DIR) $(SCXOBJ_DIR))
+ $(HOST_OBJ_DIR) $(INCLUDE_DIR) $(SCXOBJ_DIR))
$(MAKE_DIRS):
$(call msg,MKDIR,,$@)
@@ -108,18 +108,19 @@ $(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \
$(APIDIR)/linux/bpf.h \
| $(OBJ_DIR)/libbpf
$(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(OBJ_DIR)/libbpf/ \
+ ARCH=$(ARCH) CC="$(CC)" CROSS_COMPILE=$(CROSS_COMPILE) \
EXTRA_CFLAGS='-g -O0 -fPIC' \
DESTDIR=$(OUTPUT_DIR) prefix= all install_headers
$(DEFAULT_BPFTOOL): $(wildcard $(BPFTOOLDIR)/*.[ch] $(BPFTOOLDIR)/Makefile) \
- $(LIBBPF_OUTPUT) | $(OBJ_DIR)/bpftool
+ $(LIBBPF_OUTPUT) | $(HOST_OBJ_DIR)
$(Q)$(MAKE) $(submake_extras) -C $(BPFTOOLDIR) \
ARCH= CROSS_COMPILE= CC=$(HOSTCC) LD=$(HOSTLD) \
EXTRA_CFLAGS='-g -O0' \
- OUTPUT=$(OBJ_DIR)/bpftool/ \
- LIBBPF_OUTPUT=$(OBJ_DIR)/libbpf/ \
- LIBBPF_DESTDIR=$(OUTPUT_DIR)/ \
- prefix= DESTDIR=$(OUTPUT_DIR)/ install-bin
+ OUTPUT=$(HOST_OBJ_DIR)/ \
+ LIBBPF_OUTPUT=$(HOST_LIBBPF_OUTPUT) \
+ LIBBPF_DESTDIR=$(HOST_LIBBPF_DESTDIR) \
+ prefix= DESTDIR=$(HOST_DESTDIR) install-bin
$(INCLUDE_DIR)/vmlinux.h: $(VMLINUX_BTF) $(BPFTOOL) | $(INCLUDE_DIR)
ifeq ($(VMLINUX_H),)
@@ -150,9 +151,7 @@ $(INCLUDE_DIR)/%.bpf.skel.h: $(SCXOBJ_DIR)/%.bpf.o $(INCLUDE_DIR)/vmlinux.h $(BP
override define CLEAN
rm -rf $(OUTPUT_DIR)
- rm -f *.o *.bpf.o *.bpf.skel.h *.bpf.subskel.h
rm -f $(TEST_GEN_PROGS)
- rm -f runner
endef
# Every testcase takes all of the BPF progs are dependencies by default. This
@@ -196,21 +195,15 @@ $(SCXOBJ_DIR)/runner.o: runner.c | $(SCXOBJ_DIR)
# function doesn't support using implicit rules otherwise.
$(testcase-targets): $(SCXOBJ_DIR)/%.o: %.c $(SCXOBJ_DIR)/runner.o $(all_test_bpfprogs) | $(SCXOBJ_DIR)
$(eval test=$(patsubst %.o,%.c,$(notdir $@)))
- $(CC) $(CFLAGS) -c $< -o $@ $(SCXOBJ_DIR)/runner.o
+ $(CC) $(CFLAGS) -c $< -o $@
$(SCXOBJ_DIR)/util.o: util.c | $(SCXOBJ_DIR)
$(CC) $(CFLAGS) -c $< -o $@
-runner: $(SCXOBJ_DIR)/runner.o $(SCXOBJ_DIR)/util.o $(BPFOBJ) $(testcase-targets)
+$(OUTPUT)/runner: $(SCXOBJ_DIR)/runner.o $(SCXOBJ_DIR)/util.o $(BPFOBJ) $(testcase-targets)
@echo "$(testcase-targets)"
$(CC) $(CFLAGS) -o $@ $^ $(LDFLAGS)
-TEST_GEN_PROGS := runner
-
-all: runner
-
-.PHONY: all clean help
-
.DEFAULT_GOAL := all
.DELETE_ON_ERROR:
base-commit: 87d6aab2389e5ce0197d8257d5f8ee965a67c4cd
--
2.43.0
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next reply other threads:[~2024-10-08 15:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-08 15:35 Björn Töpel [this message]
2024-10-08 15:35 ` [PATCH v3] selftests: sched_ext: Add sched_ext as proper selftest target Björn Töpel
2024-10-08 20:09 ` Shuah Khan
2024-10-08 20:09 ` Shuah Khan
2024-10-08 20:38 ` David Vernet
2024-10-08 20:38 ` David Vernet
2024-10-09 16:21 ` Mark Brown
2024-10-09 16:21 ` Mark Brown
2024-10-09 16:46 ` Tejun Heo
2024-10-09 16:46 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241008153519.1270862-1-bjorn@kernel.org \
--to=bjorn@kernel.org \
--cc=anders.roxell@linaro.org \
--cc=bjorn@rivosinc.com \
--cc=bpf@vger.kernel.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=shuah@kernel.org \
--cc=tj@kernel.org \
--cc=void@manifault.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.