* [PATCH v3 0/4] Fix configuration for on-chip USB 2.0 support @ 2024-10-15 7:04 ` Minda Chen 0 siblings, 0 replies; 6+ messages in thread From: Minda Chen @ 2024-10-15 7:04 UTC (permalink / raw) To: Vinod Koul, Kishon Vijay Abraham I, Jan Kiszka, linux-phy Cc: Emil Renner Berthing, Rob Herring, Conor Dooley, linux-kernel, Minda Chen While mainline has support for the USB controller of the JH7110 since 6.5, this never really worked in USB 2.0 only case. The reason for that was a missing syscon setting that prevented the connection between USB 2.0 PHY and the controller. This series finally fixes the issue. Changes in v2: - fix copy&paste mistake in error patch found by kernel test robot and Dan Carpenter Change in v3: - Using syscon_regmap_lookup_by_compatible() to lookup regmap. So dts with no changed. Delete v2 patch1 and patch 2. Change in v4: - changed the format to make it pass strict checkpatch. base on v6.12-rc1 Jan Kiszka (1): phy: starfive: jh7110-usb: Fix link configuration to controller drivers/phy/starfive/phy-jh7110-usb.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc -- 2.17.1 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v3 0/4] Fix configuration for on-chip USB 2.0 support @ 2024-10-15 7:04 ` Minda Chen 0 siblings, 0 replies; 6+ messages in thread From: Minda Chen @ 2024-10-15 7:04 UTC (permalink / raw) To: Vinod Koul, Kishon Vijay Abraham I, Jan Kiszka, linux-phy Cc: Emil Renner Berthing, Rob Herring, Conor Dooley, linux-kernel, Minda Chen While mainline has support for the USB controller of the JH7110 since 6.5, this never really worked in USB 2.0 only case. The reason for that was a missing syscon setting that prevented the connection between USB 2.0 PHY and the controller. This series finally fixes the issue. Changes in v2: - fix copy&paste mistake in error patch found by kernel test robot and Dan Carpenter Change in v3: - Using syscon_regmap_lookup_by_compatible() to lookup regmap. So dts with no changed. Delete v2 patch1 and patch 2. Change in v4: - changed the format to make it pass strict checkpatch. base on v6.12-rc1 Jan Kiszka (1): phy: starfive: jh7110-usb: Fix link configuration to controller drivers/phy/starfive/phy-jh7110-usb.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) base-commit: 9852d85ec9d492ebef56dc5f229416c925758edc -- 2.17.1 ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v4 1/1] phy: starfive: jh7110-usb: Fix link configuration to controller 2024-10-15 7:04 ` Minda Chen @ 2024-10-15 7:04 ` Minda Chen -1 siblings, 0 replies; 6+ messages in thread From: Minda Chen @ 2024-10-15 7:04 UTC (permalink / raw) To: Vinod Koul, Kishon Vijay Abraham I, Jan Kiszka, linux-phy Cc: Emil Renner Berthing, Rob Herring, Conor Dooley, linux-kernel, Minda Chen From: Jan Kiszka <jan.kiszka@siemens.com> In order to connect the USB 2.0 PHY to its controller, we also need to set "u0_pdrstn_split_sw_usbpipe_plugen" [1]. Some downstream U-Boot versions did that, but upstream firmware does not, and the kernel must not rely on such behavior anyway. Failing to set this left the USB gadget port invisible to connected hosts behind. Link: https://doc-en.rvspace.org/JH7110/TRM/JH7110_TRM/sys_syscon.html#sys_syscon__section_b3l_fqs_wsb [1] Fixes: 16d3a71c20cf ("phy: starfive: Add JH7110 USB 2.0 PHY driver") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> --- drivers/phy/starfive/phy-jh7110-usb.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/phy/starfive/phy-jh7110-usb.c b/drivers/phy/starfive/phy-jh7110-usb.c index 633912f8a05d..cb5454fbe2c8 100644 --- a/drivers/phy/starfive/phy-jh7110-usb.c +++ b/drivers/phy/starfive/phy-jh7110-usb.c @@ -10,18 +10,24 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/regmap.h> #include <linux/usb/of.h> #define USB_125M_CLK_RATE 125000000 #define USB_LS_KEEPALIVE_OFF 0x4 #define USB_LS_KEEPALIVE_ENABLE BIT(4) +#define USB_PDRSTN_SPLIT BIT(17) +#define SYSCON_USB_SPLIT_OFFSET 0x18 + struct jh7110_usb2_phy { struct phy *phy; void __iomem *regs; + struct regmap *sys_syscon; struct clk *usb_125m_clk; struct clk *app_125m; enum phy_mode mode; @@ -61,6 +67,10 @@ static int usb2_phy_set_mode(struct phy *_phy, usb2_set_ls_keepalive(phy, (mode != PHY_MODE_USB_DEVICE)); } + /* Connect usb 2.0 phy mode */ + regmap_update_bits(phy->sys_syscon, SYSCON_USB_SPLIT_OFFSET, + USB_PDRSTN_SPLIT, USB_PDRSTN_SPLIT); + return 0; } @@ -129,6 +139,12 @@ static int jh7110_usb_phy_probe(struct platform_device *pdev) phy_set_drvdata(phy->phy, phy); phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + phy->sys_syscon = + syscon_regmap_lookup_by_compatible("starfive,jh7110-sys-syscon"); + if (IS_ERR(phy->sys_syscon)) + return dev_err_probe(dev, PTR_ERR(phy->sys_syscon), + "Failed to get sys-syscon\n"); + return PTR_ERR_OR_ZERO(phy_provider); } -- 2.17.1 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v4 1/1] phy: starfive: jh7110-usb: Fix link configuration to controller @ 2024-10-15 7:04 ` Minda Chen 0 siblings, 0 replies; 6+ messages in thread From: Minda Chen @ 2024-10-15 7:04 UTC (permalink / raw) To: Vinod Koul, Kishon Vijay Abraham I, Jan Kiszka, linux-phy Cc: Emil Renner Berthing, Rob Herring, Conor Dooley, linux-kernel, Minda Chen From: Jan Kiszka <jan.kiszka@siemens.com> In order to connect the USB 2.0 PHY to its controller, we also need to set "u0_pdrstn_split_sw_usbpipe_plugen" [1]. Some downstream U-Boot versions did that, but upstream firmware does not, and the kernel must not rely on such behavior anyway. Failing to set this left the USB gadget port invisible to connected hosts behind. Link: https://doc-en.rvspace.org/JH7110/TRM/JH7110_TRM/sys_syscon.html#sys_syscon__section_b3l_fqs_wsb [1] Fixes: 16d3a71c20cf ("phy: starfive: Add JH7110 USB 2.0 PHY driver") Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> --- drivers/phy/starfive/phy-jh7110-usb.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/phy/starfive/phy-jh7110-usb.c b/drivers/phy/starfive/phy-jh7110-usb.c index 633912f8a05d..cb5454fbe2c8 100644 --- a/drivers/phy/starfive/phy-jh7110-usb.c +++ b/drivers/phy/starfive/phy-jh7110-usb.c @@ -10,18 +10,24 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/regmap.h> #include <linux/usb/of.h> #define USB_125M_CLK_RATE 125000000 #define USB_LS_KEEPALIVE_OFF 0x4 #define USB_LS_KEEPALIVE_ENABLE BIT(4) +#define USB_PDRSTN_SPLIT BIT(17) +#define SYSCON_USB_SPLIT_OFFSET 0x18 + struct jh7110_usb2_phy { struct phy *phy; void __iomem *regs; + struct regmap *sys_syscon; struct clk *usb_125m_clk; struct clk *app_125m; enum phy_mode mode; @@ -61,6 +67,10 @@ static int usb2_phy_set_mode(struct phy *_phy, usb2_set_ls_keepalive(phy, (mode != PHY_MODE_USB_DEVICE)); } + /* Connect usb 2.0 phy mode */ + regmap_update_bits(phy->sys_syscon, SYSCON_USB_SPLIT_OFFSET, + USB_PDRSTN_SPLIT, USB_PDRSTN_SPLIT); + return 0; } @@ -129,6 +139,12 @@ static int jh7110_usb_phy_probe(struct platform_device *pdev) phy_set_drvdata(phy->phy, phy); phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + phy->sys_syscon = + syscon_regmap_lookup_by_compatible("starfive,jh7110-sys-syscon"); + if (IS_ERR(phy->sys_syscon)) + return dev_err_probe(dev, PTR_ERR(phy->sys_syscon), + "Failed to get sys-syscon\n"); + return PTR_ERR_OR_ZERO(phy_provider); } -- 2.17.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3 0/4] Fix configuration for on-chip USB 2.0 support 2024-10-15 7:04 ` Minda Chen @ 2024-10-17 15:31 ` Vinod Koul -1 siblings, 0 replies; 6+ messages in thread From: Vinod Koul @ 2024-10-17 15:31 UTC (permalink / raw) To: Kishon Vijay Abraham I, Jan Kiszka, linux-phy, Minda Chen Cc: Emil Renner Berthing, Rob Herring, Conor Dooley, linux-kernel On Tue, 15 Oct 2024 15:04:43 +0800, Minda Chen wrote: > While mainline has support for the USB controller of the JH7110 since 6.5, > this never really worked in USB 2.0 only case. > The reason for that was a missing syscon setting that prevented the > connection between USB 2.0 PHY and the controller. This series finally > fixes the issue. > > Changes in v2: > - fix copy&paste mistake in error patch found by kernel test robot and Dan Carpenter > > [...] Applied, thanks! [1/1] phy: starfive: jh7110-usb: Fix link configuration to controller commit: e10c52e7e064038d9bd67b20bf4ce92077d7d84e Best regards, -- ~Vinod -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3 0/4] Fix configuration for on-chip USB 2.0 support @ 2024-10-17 15:31 ` Vinod Koul 0 siblings, 0 replies; 6+ messages in thread From: Vinod Koul @ 2024-10-17 15:31 UTC (permalink / raw) To: Kishon Vijay Abraham I, Jan Kiszka, linux-phy, Minda Chen Cc: Emil Renner Berthing, Rob Herring, Conor Dooley, linux-kernel On Tue, 15 Oct 2024 15:04:43 +0800, Minda Chen wrote: > While mainline has support for the USB controller of the JH7110 since 6.5, > this never really worked in USB 2.0 only case. > The reason for that was a missing syscon setting that prevented the > connection between USB 2.0 PHY and the controller. This series finally > fixes the issue. > > Changes in v2: > - fix copy&paste mistake in error patch found by kernel test robot and Dan Carpenter > > [...] Applied, thanks! [1/1] phy: starfive: jh7110-usb: Fix link configuration to controller commit: e10c52e7e064038d9bd67b20bf4ce92077d7d84e Best regards, -- ~Vinod ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2024-10-17 15:33 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2024-10-15 7:04 [PATCH v3 0/4] Fix configuration for on-chip USB 2.0 support Minda Chen 2024-10-15 7:04 ` Minda Chen 2024-10-15 7:04 ` [PATCH v4 1/1] phy: starfive: jh7110-usb: Fix link configuration to controller Minda Chen 2024-10-15 7:04 ` Minda Chen 2024-10-17 15:31 ` [PATCH v3 0/4] Fix configuration for on-chip USB 2.0 support Vinod Koul 2024-10-17 15:31 ` Vinod Koul
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.