[PATCH net 0/9] There are some bugfix for the HNS3 ethernet driver

[PATCH net 0/9] There are some bugfix for the HNS3 ethernet driver

[Jijie Shao]

There are some bugfix for the HNS3 ethernet driver

Hao Lan (4):
  net: hns3: fixed reset failure issues caused by the incorrect reset
    type
  net: hns3: fix missing features due to dev->features configuration too
    early
  net: hns3: Resolved the issue that the debugfs query result is
    inconsistent.
  net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds
    issue

Jian Shen (3):
  net: hns3: add sync command to sync io-pgtable
  net: hns3: don't auto enable misc vector
  net: hns3: initialize reset_timer before hclgevf_misc_irq_init()

Jie Wang (1):
  net: hns3: fix kernel crash when 1588 is sent on HIP08 devices

Peiyang Wang (1):
  net: hns3: default enable tx bounce buffer when smmu enabled

 .../ethernet/hisilicon/hns3/hns3_debugfs.c    |  4 +-
 .../net/ethernet/hisilicon/hns3/hns3_enet.c   | 59 ++++++++++++++++++-
 .../net/ethernet/hisilicon/hns3/hns3_enet.h   |  2 +
 .../ethernet/hisilicon/hns3/hns3_ethtool.c    | 33 +++++++++++
 .../hisilicon/hns3/hns3pf/hclge_main.c        | 44 +++++++++++---
 .../hisilicon/hns3/hns3pf/hclge_ptp.c         |  3 +
 .../hisilicon/hns3/hns3pf/hclge_regs.c        |  9 +--
 .../hisilicon/hns3/hns3vf/hclgevf_main.c      | 40 ++++++++++---
 .../hisilicon/hns3/hns3vf/hclgevf_regs.c      |  9 +--
 9 files changed, 178 insertions(+), 25 deletions(-)

-- 
2.33.0

[PATCH net 1/9] net: hns3: default enable tx bounce buffer when smmu enabled

[Jijie Shao]

From: Peiyang Wang <wangpeiyang1@huawei.com>

When TX bounce buffer is enabled, dma map is used only when the buffer
initialized. When spending packages, the driver only do dma sync. To
avoid SMMU prefetch, default enable tx bounce buffer if smmu enabled.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
---
 .../net/ethernet/hisilicon/hns3/hns3_enet.c   | 31 +++++++++++++++++
 .../net/ethernet/hisilicon/hns3/hns3_enet.h   |  2 ++
 .../ethernet/hisilicon/hns3/hns3_ethtool.c    | 33 +++++++++++++++++++
 3 files changed, 66 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 4cbc4d069a1f..ac88e301f221 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -11,6 +11,7 @@
 #include <linux/irq.h>
 #include <linux/ip.h>
 #include <linux/ipv6.h>
+#include <linux/iommu.h>
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/skbuff.h>
@@ -1032,6 +1033,8 @@ static bool hns3_can_use_tx_sgl(struct hns3_enet_ring *ring,
 static void hns3_init_tx_spare_buffer(struct hns3_enet_ring *ring)
 {
 	u32 alloc_size = ring->tqp->handle->kinfo.tx_spare_buf_size;
+	struct net_device *netdev = ring_to_netdev(ring);
+	struct hns3_nic_priv *priv = netdev_priv(netdev);
 	struct hns3_tx_spare *tx_spare;
 	struct page *page;
 	dma_addr_t dma;
@@ -1073,6 +1076,7 @@ static void hns3_init_tx_spare_buffer(struct hns3_enet_ring *ring)
 	tx_spare->buf = page_address(page);
 	tx_spare->len = PAGE_SIZE << order;
 	ring->tx_spare = tx_spare;
+	ring->tx_copybreak = priv->tx_copybreak;
 	return;
 
 dma_mapping_error:
@@ -4868,6 +4872,30 @@ static void hns3_nic_dealloc_vector_data(struct hns3_nic_priv *priv)
 	devm_kfree(&pdev->dev, priv->tqp_vector);
 }
 
+static void hns3_update_tx_spare_buf_config(struct hns3_nic_priv *priv)
+{
+#define HNS3_MIN_SPARE_BUF_SIZE (2 * 1024 * 1024)
+#define HNS3_MAX_PACKET_SIZE (64 * 1024)
+
+	struct iommu_domain *domain = iommu_get_domain_for_dev(priv->dev);
+	struct hnae3_ae_dev *ae_dev = hns3_get_ae_dev(priv->ae_handle);
+	struct hnae3_handle *handle = priv->ae_handle;
+
+	if (ae_dev->dev_version < HNAE3_DEVICE_VERSION_V3)
+		return;
+
+	if (!(domain && iommu_is_dma_domain(domain)))
+		return;
+
+	priv->min_tx_copybreak = HNS3_MAX_PACKET_SIZE;
+	priv->min_tx_spare_buf_size = HNS3_MIN_SPARE_BUF_SIZE;
+
+	if (priv->tx_copybreak < priv->min_tx_copybreak)
+		priv->tx_copybreak = priv->min_tx_copybreak;
+	if (handle->kinfo.tx_spare_buf_size < priv->min_tx_spare_buf_size)
+		handle->kinfo.tx_spare_buf_size = priv->min_tx_spare_buf_size;
+}
+
 static void hns3_ring_get_cfg(struct hnae3_queue *q, struct hns3_nic_priv *priv,
 			      unsigned int ring_type)
 {
@@ -5101,6 +5129,7 @@ int hns3_init_all_ring(struct hns3_nic_priv *priv)
 	int i, j;
 	int ret;
 
+	hns3_update_tx_spare_buf_config(priv);
 	for (i = 0; i < ring_num; i++) {
 		ret = hns3_alloc_ring_memory(&priv->ring[i]);
 		if (ret) {
@@ -5305,6 +5334,8 @@ static int hns3_client_init(struct hnae3_handle *handle)
 	priv->ae_handle = handle;
 	priv->tx_timeout_count = 0;
 	priv->max_non_tso_bd_num = ae_dev->dev_specs.max_non_tso_bd_num;
+	priv->min_tx_copybreak = 0;
+	priv->min_tx_spare_buf_size = 0;
 	set_bit(HNS3_NIC_STATE_DOWN, &priv->state);
 
 	handle->msg_enable = netif_msg_init(debug, DEFAULT_MSG_LEVEL);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
index d36c4ed16d8d..caf7a4df8585 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
@@ -596,6 +596,8 @@ struct hns3_nic_priv {
 	struct hns3_enet_coalesce rx_coal;
 	u32 tx_copybreak;
 	u32 rx_copybreak;
+	u32 min_tx_copybreak;
+	u32 min_tx_spare_buf_size;
 };
 
 union l3_hdr_info {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index b1e988347347..97eaeec1952b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -1933,6 +1933,31 @@ static int hns3_set_tx_spare_buf_size(struct net_device *netdev,
 	return ret;
 }
 
+static int hns3_check_tx_copybreak(struct net_device *netdev, u32 copybreak)
+{
+	struct hns3_nic_priv *priv = netdev_priv(netdev);
+
+	if (copybreak < priv->min_tx_copybreak) {
+		netdev_err(netdev, "tx copybreak %u should be no less than %u!\n",
+			   copybreak, priv->min_tx_copybreak);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int hns3_check_tx_spare_buf_size(struct net_device *netdev, u32 buf_size)
+{
+	struct hns3_nic_priv *priv = netdev_priv(netdev);
+
+	if (buf_size < priv->min_tx_spare_buf_size) {
+		netdev_err(netdev,
+			   "tx spare buf size %u should be no less than %u!\n",
+			   buf_size, priv->min_tx_spare_buf_size);
+		return -EINVAL;
+	}
+	return 0;
+}
+
 static int hns3_set_tunable(struct net_device *netdev,
 			    const struct ethtool_tunable *tuna,
 			    const void *data)
@@ -1949,6 +1974,10 @@ static int hns3_set_tunable(struct net_device *netdev,
 
 	switch (tuna->id) {
 	case ETHTOOL_TX_COPYBREAK:
+		ret = hns3_check_tx_copybreak(netdev, *(u32 *)data);
+		if (ret)
+			return ret;
+
 		priv->tx_copybreak = *(u32 *)data;
 
 		for (i = 0; i < h->kinfo.num_tqps; i++)
@@ -1963,6 +1992,10 @@ static int hns3_set_tunable(struct net_device *netdev,
 
 		break;
 	case ETHTOOL_TX_COPYBREAK_BUF_SIZE:
+		ret = hns3_check_tx_spare_buf_size(netdev, *(u32 *)data);
+		if (ret)
+			return ret;
+
 		old_tx_spare_buf_size = h->kinfo.tx_spare_buf_size;
 		new_tx_spare_buf_size = *(u32 *)data;
 		netdev_info(netdev, "request to set tx spare buf size from %u to %u\n",
-- 
2.33.0

Re: [PATCH net 1/9] net: hns3: default enable tx bounce buffer when smmu enabled

[Jakub Kicinski]

On Fri, 11 Oct 2024 17:45:13 +0800 Jijie Shao wrote:
> From: Peiyang Wang <wangpeiyang1@huawei.com>
> 
> When TX bounce buffer is enabled, dma map is used only when the buffer
> initialized. When spending packages, the driver only do dma sync. To

packages -> packets

> avoid SMMU prefetch, default enable tx bounce buffer if smmu enabled.

you seem to force it to be enabled, rather than just changing 
the default. That is strange. Why not let the user lower the value?

Also I don't see why this is a fix. Seems like a performance
improvement.
-- 
pw-bot: cr

Re: [PATCH net 1/9] net: hns3: default enable tx bounce buffer when smmu enabled

[Jijie Shao]

on 2024/10/16 9:16, Jakub Kicinski wrote:
> On Fri, 11 Oct 2024 17:45:13 +0800 Jijie Shao wrote:
>> From: Peiyang Wang <wangpeiyang1@huawei.com>
>>
>> When TX bounce buffer is enabled, dma map is used only when the buffer
>> initialized. When spending packages, the driver only do dma sync. To
> packages -> packets
>
>> avoid SMMU prefetch, default enable tx bounce buffer if smmu enabled.
> you seem to force it to be enabled, rather than just changing
> the default. That is strange. Why not let the user lower the value?
>
> Also I don't see why this is a fix. Seems like a performance
> improvement.

The SMMU engine on HIP09 chip has a hardware issue. SMMU pagetable 
prefetch features may prefetch and use a invalid PTE even the PTE is 
valid at that time. This will cause the device trigger fake pagefaults. 
The solution is to avoid prefetching by adding a SYNC command when smmu 
mapping a iova. But the performance of nic has a sharp drop. Then we do 
this workaround, always enable tx bounce buffer, avoid mapping/unmapping 
on TX path. This issue only affects HNS3, so we always enable tx bounce 
buffer to improve performance. Thanks， Jijie Shao

Re: [PATCH net 1/9] net: hns3: default enable tx bounce buffer when smmu enabled

[Jijie Shao]

on 2024/10/16 9:16, Jakub Kicinski wrote:
> On Fri, 11 Oct 2024 17:45:13 +0800 Jijie Shao wrote:
>> From: Peiyang Wang <wangpeiyang1@huawei.com>
>>
>> When TX bounce buffer is enabled, dma map is used only when the buffer
>> initialized. When spending packages, the driver only do dma sync. To
> packages -> packets
>
>> avoid SMMU prefetch, default enable tx bounce buffer if smmu enabled.
> you seem to force it to be enabled, rather than just changing
> the default. That is strange. Why not let the user lower the value?
>
> Also I don't see why this is a fix. Seems like a performance
> improvement.

Sorry, there's a problem with the layout of the first reply.

The SMMU engine on HIP09 chip has a hardware issue.
SMMU pagetable prefetch features may prefetch and use a invalid PTE
even the PTE is valid at that time. This will cause the device trigger fake pagefaults.
The solution is to avoid prefetching by adding a SYNC command when smmu mapping a iova.
But the performance of nic has a sharp drop. Then we do this workaround, always enable tx bounce buffer,
avoid mapping/unmapping on TX path.

This issue only affects HNS3, so we always enable tx bounce buffer to improve performance.

Thanks
Jijie Shao

[PATCH net 2/9] net: hns3: add sync command to sync io-pgtable

[Jijie Shao]

From: Jian Shen <shenjian15@huawei.com>

To avoid errors in pgtable prefectch, add a sync command to sync
io-pagtable.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
---
 .../net/ethernet/hisilicon/hns3/hns3_enet.c   | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index ac88e301f221..8760b4e9ade6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -381,6 +381,24 @@ static const struct hns3_rx_ptype hns3_rx_ptype_tbl[] = {
 #define HNS3_INVALID_PTYPE \
 		ARRAY_SIZE(hns3_rx_ptype_tbl)
 
+static void hns3_dma_map_sync(struct device *dev, unsigned long iova)
+{
+	struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
+	struct iommu_iotlb_gather iotlb_gather;
+	size_t granule;
+
+	if (!domain || !iommu_is_dma_domain(domain))
+		return;
+
+	granule = 1 << __ffs(domain->pgsize_bitmap);
+	iova = ALIGN_DOWN(iova, granule);
+	iotlb_gather.start = iova;
+	iotlb_gather.end = iova + granule - 1;
+	iotlb_gather.pgsize = granule;
+
+	iommu_iotlb_sync(domain, &iotlb_gather);
+}
+
 static irqreturn_t hns3_irq_handle(int irq, void *vector)
 {
 	struct hns3_enet_tqp_vector *tqp_vector = vector;
@@ -1728,7 +1746,9 @@ static int hns3_map_and_fill_desc(struct hns3_enet_ring *ring, void *priv,
 				  unsigned int type)
 {
 	struct hns3_desc_cb *desc_cb = &ring->desc_cb[ring->next_to_use];
+	struct hnae3_handle *handle = ring->tqp->handle;
 	struct device *dev = ring_to_dev(ring);
+	struct hnae3_ae_dev *ae_dev;
 	unsigned int size;
 	dma_addr_t dma;
 
@@ -1760,6 +1780,13 @@ static int hns3_map_and_fill_desc(struct hns3_enet_ring *ring, void *priv,
 		return -ENOMEM;
 	}
 
+	/* Add a SYNC command to sync io-pgtale to avoid errors in pgtable
+	 * prefetch
+	 */
+	ae_dev = hns3_get_ae_dev(handle);
+	if (ae_dev->dev_version >= HNAE3_DEVICE_VERSION_V3)
+		hns3_dma_map_sync(dev, dma);
+
 	desc_cb->priv = priv;
 	desc_cb->length = size;
 	desc_cb->dma = dma;
-- 
2.33.0

Re: [PATCH net 2/9] net: hns3: add sync command to sync io-pgtable

[Jakub Kicinski]

On Fri, 11 Oct 2024 17:45:14 +0800 Jijie Shao wrote:
> To avoid errors in pgtable prefectch, add a sync command to sync
> io-pagtable.

I've never seen net drivers call iommu_iotlb functions.
Could you provide more context on what this is doing and 
why such unusual handling is necessary?

Re: [PATCH net 2/9] net: hns3: add sync command to sync io-pgtable

[Jijie Shao]

on 2024/10/16 9:19, Jakub Kicinski wrote:
> On Fri, 11 Oct 2024 17:45:14 +0800 Jijie Shao wrote:
>> To avoid errors in pgtable prefectch, add a sync command to sync
>> io-pagtable.
> I've never seen net drivers call iommu_iotlb functions.
> Could you provide more context on what this is doing and
> why such unusual handling is necessary?

Follow the reply of the previous patch.

In the case of large traffic, the TX bounce buffer may be used up.
At this point, we go to mapping/unmapping on TX path again.
So we added the sync command in driver to avoid hardware issue.

Thanks
Jijie Shao

[PATCH net 3/9] net: hns3: fixed reset failure issues caused by the incorrect reset type

[Jijie Shao]

From: Hao Lan <lanhao@huawei.com>

When a reset type that is not supported by the driver is input, a reset
pending flag bit of the HNAE3_NONE_RESET type is generated in
reset_pending. The driver does not have a mechanism to clear this type
of error. As a result, the driver considers that the reset is not
complete. This patch provides a mechanism to clear the
HNAE3_NONE_RESET flag and the parameter of
hnae3_ae_ops.set_default_reset_request is verified.

The error message:
hns3 0000:39:01.0: cmd failed -16
hns3 0000:39:01.0: hclge device re-init failed, VF is disabled!
hns3 0000:39:01.0: failed to reset VF stack
hns3 0000:39:01.0: failed to reset VF(4)
hns3 0000:39:01.0: prepare reset(2) wait done
hns3 0000:39:01.0 eth4: already uninitialized

Use the crash tool to view struct hclgevf_dev:
struct hclgevf_dev {
...
	default_reset_request = 0x20,
	reset_level = HNAE3_NONE_RESET,
	reset_pending = 0x100,
	reset_type = HNAE3_NONE_RESET,
...
};

Fixes: 720bd5837e37 ("net: hns3: add set_default_reset_request in the hnae3_ae_ops")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
---
 .../hisilicon/hns3/hns3pf/hclge_main.c        | 33 ++++++++++++++--
 .../hisilicon/hns3/hns3vf/hclgevf_main.c      | 38 ++++++++++++++++---
 2 files changed, 61 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index bd86efd92a5a..35c618c794be 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -3584,6 +3584,17 @@ static int hclge_set_vf_link_state(struct hnae3_handle *handle, int vf,
 	return ret;
 }
 
+static void hclge_set_reset_pending(struct hclge_dev *hdev,
+				    enum hnae3_reset_type reset_type)
+{
+	/* When an incorrect reset type is executed, the get_reset_level
+	 * function generates the HNAE3_NONE_RESET flag. As a result, this
+	 * type do not need to pending.
+	 */
+	if (reset_type != HNAE3_NONE_RESET)
+		set_bit(reset_type, &hdev->reset_pending);
+}
+
 static u32 hclge_check_event_cause(struct hclge_dev *hdev, u32 *clearval)
 {
 	u32 cmdq_src_reg, msix_src_reg, hw_err_src_reg;
@@ -3604,7 +3615,7 @@ static u32 hclge_check_event_cause(struct hclge_dev *hdev, u32 *clearval)
 	 */
 	if (BIT(HCLGE_VECTOR0_IMPRESET_INT_B) & msix_src_reg) {
 		dev_info(&hdev->pdev->dev, "IMP reset interrupt\n");
-		set_bit(HNAE3_IMP_RESET, &hdev->reset_pending);
+		hclge_set_reset_pending(hdev, HNAE3_IMP_RESET);
 		set_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state);
 		*clearval = BIT(HCLGE_VECTOR0_IMPRESET_INT_B);
 		hdev->rst_stats.imp_rst_cnt++;
@@ -3614,7 +3625,7 @@ static u32 hclge_check_event_cause(struct hclge_dev *hdev, u32 *clearval)
 	if (BIT(HCLGE_VECTOR0_GLOBALRESET_INT_B) & msix_src_reg) {
 		dev_info(&hdev->pdev->dev, "global reset interrupt\n");
 		set_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state);
-		set_bit(HNAE3_GLOBAL_RESET, &hdev->reset_pending);
+		hclge_set_reset_pending(hdev, HNAE3_GLOBAL_RESET);
 		*clearval = BIT(HCLGE_VECTOR0_GLOBALRESET_INT_B);
 		hdev->rst_stats.global_rst_cnt++;
 		return HCLGE_VECTOR0_EVENT_RST;
@@ -4062,7 +4073,7 @@ static void hclge_do_reset(struct hclge_dev *hdev)
 	case HNAE3_FUNC_RESET:
 		dev_info(&pdev->dev, "PF reset requested\n");
 		/* schedule again to check later */
-		set_bit(HNAE3_FUNC_RESET, &hdev->reset_pending);
+		hclge_set_reset_pending(hdev, HNAE3_FUNC_RESET);
 		hclge_reset_task_schedule(hdev);
 		break;
 	default:
@@ -4096,6 +4107,8 @@ static enum hnae3_reset_type hclge_get_reset_level(struct hnae3_ae_dev *ae_dev,
 		clear_bit(HNAE3_FLR_RESET, addr);
 	}
 
+	clear_bit(HNAE3_NONE_RESET, addr);
+
 	if (hdev->reset_type != HNAE3_NONE_RESET &&
 	    rst_level < hdev->reset_type)
 		return HNAE3_NONE_RESET;
@@ -4237,7 +4250,7 @@ static bool hclge_reset_err_handle(struct hclge_dev *hdev)
 		return false;
 	} else if (hdev->rst_stats.reset_fail_cnt < MAX_RESET_FAIL_CNT) {
 		hdev->rst_stats.reset_fail_cnt++;
-		set_bit(hdev->reset_type, &hdev->reset_pending);
+		hclge_set_reset_pending(hdev, hdev->reset_type);
 		dev_info(&hdev->pdev->dev,
 			 "re-schedule reset task(%u)\n",
 			 hdev->rst_stats.reset_fail_cnt);
@@ -4480,8 +4493,20 @@ static void hclge_reset_event(struct pci_dev *pdev, struct hnae3_handle *handle)
 static void hclge_set_def_reset_request(struct hnae3_ae_dev *ae_dev,
 					enum hnae3_reset_type rst_type)
 {
+#define HCLGE_SUPPORT_RESET_TYPE \
+	(BIT(HNAE3_FLR_RESET) | BIT(HNAE3_FUNC_RESET) | \
+	BIT(HNAE3_GLOBAL_RESET) | BIT(HNAE3_IMP_RESET))
+
 	struct hclge_dev *hdev = ae_dev->priv;
 
+	if (!(BIT(rst_type) & HCLGE_SUPPORT_RESET_TYPE)) {
+		/* To prevent reset triggered by hclge_reset_event */
+		set_bit(HNAE3_NONE_RESET, &hdev->default_reset_request);
+		dev_warn(&hdev->pdev->dev, "unsupported reset type %d\n",
+			 rst_type);
+		return;
+	}
+
 	set_bit(rst_type, &hdev->default_reset_request);
 }
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 094a7c7b5592..ab54e6155e93 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -1395,6 +1395,17 @@ static int hclgevf_notify_roce_client(struct hclgevf_dev *hdev,
 	return ret;
 }
 
+static void hclgevf_set_reset_pending(struct hclgevf_dev *hdev,
+				      enum hnae3_reset_type reset_type)
+{
+	/* When an incorrect reset type is executed, the get_reset_level
+	 * function generates the HNAE3_NONE_RESET flag. As a result, this
+	 * type do not need to pending.
+	 */
+	if (reset_type != HNAE3_NONE_RESET)
+		set_bit(reset_type, &hdev->reset_pending);
+}
+
 static int hclgevf_reset_wait(struct hclgevf_dev *hdev)
 {
 #define HCLGEVF_RESET_WAIT_US	20000
@@ -1544,7 +1555,7 @@ static void hclgevf_reset_err_handle(struct hclgevf_dev *hdev)
 		hdev->rst_stats.rst_fail_cnt);
 
 	if (hdev->rst_stats.rst_fail_cnt < HCLGEVF_RESET_MAX_FAIL_CNT)
-		set_bit(hdev->reset_type, &hdev->reset_pending);
+		hclgevf_set_reset_pending(hdev, hdev->reset_type);
 
 	if (hclgevf_is_reset_pending(hdev)) {
 		set_bit(HCLGEVF_RESET_PENDING, &hdev->reset_state);
@@ -1664,6 +1675,8 @@ static enum hnae3_reset_type hclgevf_get_reset_level(unsigned long *addr)
 		clear_bit(HNAE3_FLR_RESET, addr);
 	}
 
+	clear_bit(HNAE3_NONE_RESET, addr);
+
 	return rst_level;
 }
 
@@ -1673,14 +1686,15 @@ static void hclgevf_reset_event(struct pci_dev *pdev,
 	struct hnae3_ae_dev *ae_dev = pci_get_drvdata(pdev);
 	struct hclgevf_dev *hdev = ae_dev->priv;
 
-	dev_info(&hdev->pdev->dev, "received reset request from VF enet\n");
-
 	if (hdev->default_reset_request)
 		hdev->reset_level =
 			hclgevf_get_reset_level(&hdev->default_reset_request);
 	else
 		hdev->reset_level = HNAE3_VF_FUNC_RESET;
 
+	dev_info(&hdev->pdev->dev, "received reset request from VF enet, reset level is %d\n",
+		 hdev->reset_level);
+
 	/* reset of this VF requested */
 	set_bit(HCLGEVF_RESET_REQUESTED, &hdev->reset_state);
 	hclgevf_reset_task_schedule(hdev);
@@ -1691,8 +1705,20 @@ static void hclgevf_reset_event(struct pci_dev *pdev,
 static void hclgevf_set_def_reset_request(struct hnae3_ae_dev *ae_dev,
 					  enum hnae3_reset_type rst_type)
 {
+#define HCLGEVF_SUPPORT_RESET_TYPE \
+	(BIT(HNAE3_VF_RESET) | BIT(HNAE3_VF_FUNC_RESET) | \
+	BIT(HNAE3_VF_PF_FUNC_RESET) | BIT(HNAE3_VF_FULL_RESET) | \
+	BIT(HNAE3_FLR_RESET) | BIT(HNAE3_VF_EXP_RESET))
+
 	struct hclgevf_dev *hdev = ae_dev->priv;
 
+	if (!(BIT(rst_type) & HCLGEVF_SUPPORT_RESET_TYPE)) {
+		/* To prevent reset triggered by hclge_reset_event */
+		set_bit(HNAE3_NONE_RESET, &hdev->default_reset_request);
+		dev_info(&hdev->pdev->dev, "unsupported reset type %d\n",
+			 rst_type);
+		return;
+	}
 	set_bit(rst_type, &hdev->default_reset_request);
 }
 
@@ -1849,14 +1875,14 @@ static void hclgevf_reset_service_task(struct hclgevf_dev *hdev)
 		 */
 		if (hdev->reset_attempts > HCLGEVF_MAX_RESET_ATTEMPTS_CNT) {
 			/* prepare for full reset of stack + pcie interface */
-			set_bit(HNAE3_VF_FULL_RESET, &hdev->reset_pending);
+			hclgevf_set_reset_pending(hdev, HNAE3_VF_FULL_RESET);
 
 			/* "defer" schedule the reset task again */
 			set_bit(HCLGEVF_RESET_PENDING, &hdev->reset_state);
 		} else {
 			hdev->reset_attempts++;
 
-			set_bit(hdev->reset_level, &hdev->reset_pending);
+			hclgevf_set_reset_pending(hdev, hdev->reset_level);
 			set_bit(HCLGEVF_RESET_PENDING, &hdev->reset_state);
 		}
 		hclgevf_reset_task_schedule(hdev);
@@ -1979,7 +2005,7 @@ static enum hclgevf_evt_cause hclgevf_check_evt_cause(struct hclgevf_dev *hdev,
 		rst_ing_reg = hclgevf_read_dev(&hdev->hw, HCLGEVF_RST_ING);
 		dev_info(&hdev->pdev->dev,
 			 "receive reset interrupt 0x%x!\n", rst_ing_reg);
-		set_bit(HNAE3_VF_RESET, &hdev->reset_pending);
+		hclgevf_set_reset_pending(hdev, HNAE3_VF_RESET);
 		set_bit(HCLGEVF_RESET_PENDING, &hdev->reset_state);
 		set_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state);
 		*clearval = ~(1U << HCLGEVF_VECTOR0_RST_INT_B);
-- 
2.33.0

[PATCH net 4/9] net: hns3: fix missing features due to dev->features configuration too early

[Jijie Shao]

From: Hao Lan <lanhao@huawei.com>

Currently, the netdev->features is configured in hns3_nic_set_features.
As a result, __netdev_update_features considers that there is no feature
difference, and the procedures of the real features are missing.

Fixes: 2a7556bb2b73 ("net: hns3: implement ndo_features_check ops for hns3 driver")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 8760b4e9ade6..b09f0cca34dc 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -2483,7 +2483,6 @@ static int hns3_nic_set_features(struct net_device *netdev,
 			return ret;
 	}
 
-	netdev->features = features;
 	return 0;
 }
 
-- 
2.33.0

[PATCH net 5/9] net: hns3: Resolved the issue that the debugfs query result is inconsistent.

[Jijie Shao]

From: Hao Lan <lanhao@huawei.com>

This patch modifies the implementation of debugfs:
When the user process stops unexpectedly, not all data of the file system
is read. In this case, the save_buf pointer is not released. When the user
process is called next time, save_buf is used to copy the cached data
to the user space. As a result, the queried data is inconsistent. To solve
this problem, determine whether the function is invoked for the first time
based on the value of *ppos. If *ppos is 0, obtain the actual data.

Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Guangwei Zhang <zhangwangwei6@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
index 807eb3bbb11c..841e5af7b2be 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c
@@ -1293,8 +1293,10 @@ static ssize_t hns3_dbg_read(struct file *filp, char __user *buffer,
 
 		/* save the buffer addr until the last read operation */
 		*save_buf = read_buf;
+	}
 
-		/* get data ready for the first time to read */
+	/* get data ready for the first time to read */
+	if (!*ppos) {
 		ret = hns3_dbg_read_cmd(dbg_data, hns3_dbg_cmd[index].cmd,
 					read_buf, hns3_dbg_cmd[index].buf_len);
 		if (ret)
-- 
2.33.0

[PATCH net 6/9] net: hns3: don't auto enable misc vector

[Jijie Shao]

From: Jian Shen <shenjian15@huawei.com>

Currently, there is a time window between misc irq enabled
and service task inited. If an interrupte is reported at
this time, it will cause warning like below:

[   16.324639] Call trace:
[   16.324641]  __queue_delayed_work+0xb8/0xe0
[   16.324643]  mod_delayed_work_on+0x78/0xd0
[   16.324655]  hclge_errhand_task_schedule+0x58/0x90 [hclge]
[   16.324662]  hclge_misc_irq_handle+0x168/0x240 [hclge]
[   16.324666]  __handle_irq_event_percpu+0x64/0x1e0
[   16.324667]  handle_irq_event+0x80/0x170
[   16.324670]  handle_fasteoi_edge_irq+0x110/0x2bc
[   16.324671]  __handle_domain_irq+0x84/0xfc
[   16.324673]  gic_handle_irq+0x88/0x2c0
[   16.324674]  el1_irq+0xb8/0x140
[   16.324677]  arch_cpu_idle+0x18/0x40
[   16.324679]  default_idle_call+0x5c/0x1bc
[   16.324682]  cpuidle_idle_call+0x18c/0x1c4
[   16.324684]  do_idle+0x174/0x17c
[   16.324685]  cpu_startup_entry+0x30/0x6c
[   16.324687]  secondary_start_kernel+0x1a4/0x280
[   16.324688] ---[ end trace 6aa0bff672a964aa ]---

So don't auto enable misc vector when request irq..

Fixes: 7be1b9f3e99f ("net: hns3: make hclge_service use delayed workqueue")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
---
 .../net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c   | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 35c618c794be..07e48145f3fe 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -6,6 +6,7 @@
 #include <linux/etherdevice.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
@@ -3779,6 +3780,7 @@ static int hclge_misc_irq_init(struct hclge_dev *hdev)
 	/* this would be explicitly freed in the end */
 	snprintf(hdev->misc_vector.name, HNAE3_INT_NAME_LEN, "%s-misc-%s",
 		 HCLGE_NAME, pci_name(hdev->pdev));
+	irq_set_status_flags(hdev->misc_vector.vector_irq, IRQ_NOAUTOEN);
 	ret = request_irq(hdev->misc_vector.vector_irq, hclge_misc_irq_handle,
 			  0, hdev->misc_vector.name, hdev);
 	if (ret) {
@@ -11916,9 +11918,6 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev)
 
 	hclge_init_rxd_adv_layout(hdev);
 
-	/* Enable MISC vector(vector0) */
-	hclge_enable_vector(&hdev->misc_vector, true);
-
 	ret = hclge_init_wol(hdev);
 	if (ret)
 		dev_warn(&pdev->dev,
@@ -11931,6 +11930,10 @@ static int hclge_init_ae_dev(struct hnae3_ae_dev *ae_dev)
 	hclge_state_init(hdev);
 	hdev->last_reset_time = jiffies;
 
+	/* Enable MISC vector(vector0) */
+	enable_irq(hdev->misc_vector.vector_irq);
+	hclge_enable_vector(&hdev->misc_vector, true);
+
 	dev_info(&hdev->pdev->dev, "%s driver initialization finished.\n",
 		 HCLGE_DRIVER_NAME);
 
@@ -12336,7 +12339,7 @@ static void hclge_uninit_ae_dev(struct hnae3_ae_dev *ae_dev)
 
 	/* Disable MISC vector(vector0) */
 	hclge_enable_vector(&hdev->misc_vector, false);
-	synchronize_irq(hdev->misc_vector.vector_irq);
+	disable_irq(hdev->misc_vector.vector_irq);
 
 	/* Disable all hw interrupts */
 	hclge_config_mac_tnl_int(hdev, false);
-- 
2.33.0

Re: [PATCH net 6/9] net: hns3: don't auto enable misc vector

[Jakub Kicinski]

On Fri, 11 Oct 2024 17:45:18 +0800 Jijie Shao wrote:
> +	irq_set_status_flags(hdev->misc_vector.vector_irq, IRQ_NOAUTOEN);
>  	ret = request_irq(hdev->misc_vector.vector_irq, hclge_misc_irq_handle,

You can pass IRQF_NO_AUTOEN to request_irq() instead, no?

Re: [PATCH net 6/9] net: hns3: don't auto enable misc vector

[Jijie Shao]

on 2024/10/16 9:22, Jakub Kicinski wrote:
> On Fri, 11 Oct 2024 17:45:18 +0800 Jijie Shao wrote:
>> +	irq_set_status_flags(hdev->misc_vector.vector_irq, IRQ_NOAUTOEN);
>>   	ret = request_irq(hdev->misc_vector.vector_irq, hclge_misc_irq_handle,
> You can pass IRQF_NO_AUTOEN to request_irq() instead, no?

Yeah， I wil fix it in V2

Thanks
Jijie Shao

[PATCH net 7/9] net: hns3: initialize reset_timer before hclgevf_misc_irq_init()

[Jijie Shao]

From: Jian Shen <shenjian15@huawei.com>

Currently the misc irq is initialized before reset_timer setup. But
it will access the reset_timer in the irq handler. So initialize
the reset_timer earlier.

Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index ab54e6155e93..896f1eb172d3 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -2315,6 +2315,7 @@ static void hclgevf_state_init(struct hclgevf_dev *hdev)
 	clear_bit(HCLGEVF_STATE_RST_FAIL, &hdev->state);
 
 	INIT_DELAYED_WORK(&hdev->service_task, hclgevf_service_task);
+	timer_setup(&hdev->reset_timer, hclgevf_reset_timer, 0);
 
 	mutex_init(&hdev->mbx_resp.mbx_mutex);
 	sema_init(&hdev->reset_sem, 1);
@@ -3014,7 +3015,6 @@ static int hclgevf_init_hdev(struct hclgevf_dev *hdev)
 		 HCLGEVF_DRIVER_NAME);
 
 	hclgevf_task_schedule(hdev, round_jiffies_relative(HZ));
-	timer_setup(&hdev->reset_timer, hclgevf_reset_timer, 0);
 
 	return 0;
 
-- 
2.33.0

[PATCH net 8/9] net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue

[Jijie Shao]

From: Hao Lan <lanhao@huawei.com>

The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs
1024-1279 are in different BAR space addresses. However,
hclge_fetch_pf_reg does not distinguish the tqp space information when
reading the tqp space information. When the number of TQPs is greater
than 1024, access bar space overwriting occurs.
The problem of different segments has been considered during the
initialization of tqp.io_base. Therefore, tqp.io_base is directly used
when the queue is read in hclge_fetch_pf_reg.

The error message:

Unable to handle kernel paging request at virtual address ffff800037200000
pc : hclge_fetch_pf_reg+0x138/0x250 [hclge]
lr : hclge_get_regs+0x84/0x1d0 [hclge]
Call trace:
 hclge_fetch_pf_reg+0x138/0x250 [hclge]
 hclge_get_regs+0x84/0x1d0 [hclge]
 hns3_get_regs+0x2c/0x50 [hns3]
 ethtool_get_regs+0xf4/0x270
 dev_ethtool+0x674/0x8a0
 dev_ioctl+0x270/0x36c
 sock_do_ioctl+0x110/0x2a0
 sock_ioctl+0x2ac/0x530
 __arm64_sys_ioctl+0xa8/0x100
 invoke_syscall+0x4c/0x124
 el0_svc_common.constprop.0+0x140/0x15c
 do_el0_svc+0x30/0xd0
 el0_svc+0x1c/0x2c
 el0_sync_handler+0xb0/0xb4
 el0_sync+0x168/0x180

Fixes: 939ccd107ffc ("net: hns3: move dump regs function to a separate file")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_regs.c  | 9 +++++----
 .../net/ethernet/hisilicon/hns3/hns3vf/hclgevf_regs.c    | 9 +++++----
 2 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_regs.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_regs.c
index 43c1c18fa81f..8c057192aae6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_regs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_regs.c
@@ -510,9 +510,9 @@ static int hclge_get_dfx_reg(struct hclge_dev *hdev, void *data)
 static int hclge_fetch_pf_reg(struct hclge_dev *hdev, void *data,
 			      struct hnae3_knic_private_info *kinfo)
 {
-#define HCLGE_RING_REG_OFFSET		0x200
 #define HCLGE_RING_INT_REG_OFFSET	0x4
 
+	struct hnae3_queue *tqp;
 	int i, j, reg_num;
 	int data_num_sum;
 	u32 *reg = data;
@@ -533,10 +533,11 @@ static int hclge_fetch_pf_reg(struct hclge_dev *hdev, void *data,
 	reg_num = ARRAY_SIZE(ring_reg_addr_list);
 	for (j = 0; j < kinfo->num_tqps; j++) {
 		reg += hclge_reg_get_tlv(HCLGE_REG_TAG_RING, reg_num, reg);
+		tqp = kinfo->tqp[j];
 		for (i = 0; i < reg_num; i++)
-			*reg++ = hclge_read_dev(&hdev->hw,
-						ring_reg_addr_list[i] +
-						HCLGE_RING_REG_OFFSET * j);
+			*reg++ = readl_relaxed(tqp->io_base -
+					       HCLGE_TQP_REG_OFFSET +
+					       ring_reg_addr_list[i]);
 	}
 	data_num_sum += (reg_num + HCLGE_REG_TLV_SPACE) * kinfo->num_tqps;
 
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_regs.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_regs.c
index 6db415d8b917..7d9d9dbc7560 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_regs.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_regs.c
@@ -123,10 +123,10 @@ int hclgevf_get_regs_len(struct hnae3_handle *handle)
 void hclgevf_get_regs(struct hnae3_handle *handle, u32 *version,
 		      void *data)
 {
-#define HCLGEVF_RING_REG_OFFSET		0x200
 #define HCLGEVF_RING_INT_REG_OFFSET	0x4
 
 	struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
+	struct hnae3_queue *tqp;
 	int i, j, reg_um;
 	u32 *reg = data;
 
@@ -147,10 +147,11 @@ void hclgevf_get_regs(struct hnae3_handle *handle, u32 *version,
 	reg_um = ARRAY_SIZE(ring_reg_addr_list);
 	for (j = 0; j < hdev->num_tqps; j++) {
 		reg += hclgevf_reg_get_tlv(HCLGEVF_REG_TAG_RING, reg_um, reg);
+		tqp = &hdev->htqp[j].q;
 		for (i = 0; i < reg_um; i++)
-			*reg++ = hclgevf_read_dev(&hdev->hw,
-						  ring_reg_addr_list[i] +
-						  HCLGEVF_RING_REG_OFFSET * j);
+			*reg++ = readl_relaxed(tqp->io_base -
+					       HCLGEVF_TQP_REG_OFFSET +
+					       ring_reg_addr_list[i]);
 	}
 
 	reg_um = ARRAY_SIZE(tqp_intr_reg_addr_list);
-- 
2.33.0

[PATCH net 9/9] net: hns3: fix kernel crash when 1588 is sent on HIP08 devices

[Jijie Shao]

From: Jie Wang <wangjie125@huawei.com>

Currently, HIP08 devices does not register the ptp devices, so the
hdev->ptp is NULL. But the tx process would still try to set hardware time
stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash.

[  128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
...
[  128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge]
[  128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge]
[  128.292938] sp : ffff800059b93140
[  128.297200] x29: ffff800059b93140 x28: 0000000000003280
[  128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080
[  128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001
[  128.315969] x23: 0000000000000000 x22: 0000000000000194
[  128.322219] x21: ffff0cd94f986000 x20: 0000000000000000
[  128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000
[  128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24
[  128.340934] x15: 0000ffffd530a518 x14: 0000000000000000
[  128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368
[  128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02
[  128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0
[  128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000
[  128.372040] x5 : 0000000000000000 x4 : 000000000000ffff
[  128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294
[  128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080
[  128.390626] Call trace:
[  128.393964]  hclge_ptp_set_tx_info+0x2c/0x140 [hclge]
[  128.399893]  hns3_nic_net_xmit+0x39c/0x4c4 [hns3]
[  128.405468]  xmit_one.constprop.0+0xc4/0x200
[  128.410600]  dev_hard_start_xmit+0x54/0xf0
[  128.415556]  sch_direct_xmit+0xe8/0x634
[  128.420246]  __dev_queue_xmit+0x224/0xc70
[  128.425101]  dev_queue_xmit+0x1c/0x40
[  128.429608]  ovs_vport_send+0xac/0x1a0 [openvswitch]
[  128.435409]  do_output+0x60/0x17c [openvswitch]
[  128.440770]  do_execute_actions+0x898/0x8c4 [openvswitch]
[  128.446993]  ovs_execute_actions+0x64/0xf0 [openvswitch]
[  128.453129]  ovs_dp_process_packet+0xa0/0x224 [openvswitch]
[  128.459530]  ovs_vport_receive+0x7c/0xfc [openvswitch]
[  128.465497]  internal_dev_xmit+0x34/0xb0 [openvswitch]
[  128.471460]  xmit_one.constprop.0+0xc4/0x200
[  128.476561]  dev_hard_start_xmit+0x54/0xf0
[  128.481489]  __dev_queue_xmit+0x968/0xc70
[  128.486330]  dev_queue_xmit+0x1c/0x40
[  128.490856]  ip_finish_output2+0x250/0x570
[  128.495810]  __ip_finish_output+0x170/0x1e0
[  128.500832]  ip_finish_output+0x3c/0xf0
[  128.505504]  ip_output+0xbc/0x160
[  128.509654]  ip_send_skb+0x58/0xd4
[  128.513892]  udp_send_skb+0x12c/0x354
[  128.518387]  udp_sendmsg+0x7a8/0x9c0
[  128.522793]  inet_sendmsg+0x4c/0x8c
[  128.527116]  __sock_sendmsg+0x48/0x80
[  128.531609]  __sys_sendto+0x124/0x164
[  128.536099]  __arm64_sys_sendto+0x30/0x5c
[  128.540935]  invoke_syscall+0x50/0x130
[  128.545508]  el0_svc_common.constprop.0+0x10c/0x124
[  128.551205]  do_el0_svc+0x34/0xdc
[  128.555347]  el0_svc+0x20/0x30
[  128.559227]  el0_sync_handler+0xb8/0xc0
[  128.563883]  el0_sync+0x160/0x180

Fixes: 0bf5eb788512 ("net: hns3: add support for PTP")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c
index 5505caea88e9..bab16c2191b2 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ptp.c
@@ -58,6 +58,9 @@ bool hclge_ptp_set_tx_info(struct hnae3_handle *handle, struct sk_buff *skb)
 	struct hclge_dev *hdev = vport->back;
 	struct hclge_ptp *ptp = hdev->ptp;
 
+	if (!ptp)
+		return false;
+
 	if (!test_bit(HCLGE_PTP_FLAG_TX_EN, &ptp->flags) ||
 	    test_and_set_bit(HCLGE_STATE_PTP_TX_HANDLING, &hdev->state)) {
 		ptp->tx_skipped++;
-- 
2.33.0