From: E Shattow <e@freeshell.de>
To: Henry Bell <dmoo_dv@protonmail.com>
Cc: E Shattow <e@freeshell.de>,
Emil Renner Berthing <kernel@esmil.dk>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] riscv: dts: starfive: Update ethernet phy0 delay parameter values for Star64
Date: Mon, 21 Oct 2024 23:09:51 -0700 [thread overview]
Message-ID: <20241022061004.62812-1-e@freeshell.de> (raw)
Improve function of Star64 bottom network port phy0 with updated delay values.
Initial upstream patches supporting Star64 use the same vendor board support
package parameters known to result in an unreliable bottom network port.
Success acquiring DHCP lease and no dropped packets to ping LAN address:
rx 900: tx 1500 1650 1800 1950
rx 750: tx 1650 1800 1950
rx 600: tx 1800 1950
rx 1050: tx 1650 1800 1950
rx 1200: tx 1500 1650 1800 1950
rx 1350: tx 1500 1650 1800 1950
rx 1500: tx 1500 1650 1800 1950
rx 1650: tx 1500 1650 1800 1950
rx 1800: tx 1500 1650 1800 1950
rx 1900: tx 1950
rx 1950: tx 1950
Failure acquiring DHCP lease or many dropped packets:
rx 450: tx 1500 1800 1950
rx 600: tx 1200 1350 1650
rx 750: tx 1350 1500
rx 900: tx 1200 1350
rx 1050: tx 1050 1200 1350 1500
rx 1200: tx 1350
rx 1350: tx 1350
rx 1500: tx 1200 1350
rx 1650: tx 1050 1200 1350
rx 1800: tx 1050 1200 1350
rx 1900: tx 1500 1650 1800
rx 1950: tx 1200 1350
Non-functional:
rx 0: tx 0 150 300 450 600 750 900 1050 1200 1350 1500 1650 1800 1950
rx 150: tx 0 150 300 450 600 750 900 1050 1200 1350 1500 1650 1800 1950
rx 300: tx 0 150 300 450 600 750 900 1050 1200 1350 1500 1650 1800 1950
rx 450: tx 0 150 300 450 600 750 900 1050 1200 1350 1650
rx 600: tx 0 150 300 450 600 750 900 1050
rx 750: tx 0 150 300 450 600 750 900 1050 1200
rx 900: tx 0 150 300 450 600 750 900 1050
rx 1050: tx 0 150 300 450 600 750 900
rx 1200: tx 0 150 300 450 600 750 900 1050 1200
rx 1350: tx 0 150 300 450 600 750 900 1050 1200
rx 1500: tx 0 150 300 450 600 750 900 1050
rx 1650: tx 0 150 300 450 600 750 900
rx 1800: tx 0 150 300 450 600 750 900
rx 1900: tx 0 150 300 450 600 750 900 1050 1200 1350
rx 1950: tx 0 150 300 450 600 750 900 1050
Selecting the median of all working rx delay values 1500 combined with tx delay
values 1500, 1650, 1800, and 1950 only the tx delay value of 1950 (default) is
reliable as tested in both Linux 6.11.2 and U-Boot v2024.10
Signed-off-by: E Shattow <e@freeshell.de>
---
arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
index b720cdd15ed6..8e39fdc73ecb 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
@@ -44,8 +44,7 @@ &pcie1 {
};
&phy0 {
- rx-internal-delay-ps = <1900>;
- tx-internal-delay-ps = <1500>;
+ rx-internal-delay-ps = <1500>;
motorcomm,rx-clk-drv-microamp = <2910>;
motorcomm,rx-data-drv-microamp = <2910>;
motorcomm,tx-clk-adj-enabled;
--
2.45.2
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
WARNING: multiple messages have this Message-ID (diff)
From: E Shattow <e@freeshell.de>
To: Henry Bell <dmoo_dv@protonmail.com>
Cc: E Shattow <e@freeshell.de>,
Emil Renner Berthing <kernel@esmil.dk>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] riscv: dts: starfive: Update ethernet phy0 delay parameter values for Star64
Date: Mon, 21 Oct 2024 23:09:51 -0700 [thread overview]
Message-ID: <20241022061004.62812-1-e@freeshell.de> (raw)
Improve function of Star64 bottom network port phy0 with updated delay values.
Initial upstream patches supporting Star64 use the same vendor board support
package parameters known to result in an unreliable bottom network port.
Success acquiring DHCP lease and no dropped packets to ping LAN address:
rx 900: tx 1500 1650 1800 1950
rx 750: tx 1650 1800 1950
rx 600: tx 1800 1950
rx 1050: tx 1650 1800 1950
rx 1200: tx 1500 1650 1800 1950
rx 1350: tx 1500 1650 1800 1950
rx 1500: tx 1500 1650 1800 1950
rx 1650: tx 1500 1650 1800 1950
rx 1800: tx 1500 1650 1800 1950
rx 1900: tx 1950
rx 1950: tx 1950
Failure acquiring DHCP lease or many dropped packets:
rx 450: tx 1500 1800 1950
rx 600: tx 1200 1350 1650
rx 750: tx 1350 1500
rx 900: tx 1200 1350
rx 1050: tx 1050 1200 1350 1500
rx 1200: tx 1350
rx 1350: tx 1350
rx 1500: tx 1200 1350
rx 1650: tx 1050 1200 1350
rx 1800: tx 1050 1200 1350
rx 1900: tx 1500 1650 1800
rx 1950: tx 1200 1350
Non-functional:
rx 0: tx 0 150 300 450 600 750 900 1050 1200 1350 1500 1650 1800 1950
rx 150: tx 0 150 300 450 600 750 900 1050 1200 1350 1500 1650 1800 1950
rx 300: tx 0 150 300 450 600 750 900 1050 1200 1350 1500 1650 1800 1950
rx 450: tx 0 150 300 450 600 750 900 1050 1200 1350 1650
rx 600: tx 0 150 300 450 600 750 900 1050
rx 750: tx 0 150 300 450 600 750 900 1050 1200
rx 900: tx 0 150 300 450 600 750 900 1050
rx 1050: tx 0 150 300 450 600 750 900
rx 1200: tx 0 150 300 450 600 750 900 1050 1200
rx 1350: tx 0 150 300 450 600 750 900 1050 1200
rx 1500: tx 0 150 300 450 600 750 900 1050
rx 1650: tx 0 150 300 450 600 750 900
rx 1800: tx 0 150 300 450 600 750 900
rx 1900: tx 0 150 300 450 600 750 900 1050 1200 1350
rx 1950: tx 0 150 300 450 600 750 900 1050
Selecting the median of all working rx delay values 1500 combined with tx delay
values 1500, 1650, 1800, and 1950 only the tx delay value of 1950 (default) is
reliable as tested in both Linux 6.11.2 and U-Boot v2024.10
Signed-off-by: E Shattow <e@freeshell.de>
---
arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
index b720cdd15ed6..8e39fdc73ecb 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
@@ -44,8 +44,7 @@ &pcie1 {
};
&phy0 {
- rx-internal-delay-ps = <1900>;
- tx-internal-delay-ps = <1500>;
+ rx-internal-delay-ps = <1500>;
motorcomm,rx-clk-drv-microamp = <2910>;
motorcomm,rx-data-drv-microamp = <2910>;
motorcomm,tx-clk-adj-enabled;
--
2.45.2
next reply other threads:[~2024-10-22 6:11 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-22 6:09 E Shattow [this message]
2024-10-22 6:09 ` [PATCH] riscv: dts: starfive: Update ethernet phy0 delay parameter values for Star64 E Shattow
2024-10-22 16:41 ` Conor Dooley
2024-10-22 16:41 ` Conor Dooley
2024-10-23 1:12 ` E Shattow
2024-10-23 1:12 ` E Shattow
2024-10-22 17:39 ` Emil Renner Berthing
2024-10-22 17:39 ` Emil Renner Berthing
2024-10-23 10:30 ` Conor Dooley
2024-10-23 10:30 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241022061004.62812-1-e@freeshell.de \
--to=e@freeshell.de \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmoo_dv@protonmail.com \
--cc=kernel@esmil.dk \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.