From: Hal Feng <hal.feng@starfivetech.com>
To: Leo <ycliang@andestech.com>, Tom Rini <trini@konsulko.com>,
Sumit Garg <sumit.garg@linaro.org>,
Rick Chen <rick@andestech.com>,
Heinrich Schuchardt <xypron.glpk@gmx.de>,
H Bell <dmoo_dv@protonmail.com>, E Shattow <lucent@gmail.com>,
Nam Cao <namcao@linutronix.de>, Bo Gan <ganboing@gmail.com>
Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com>,
Minda Chen <minda.chen@starfivetech.com>,
Hal Feng <hal.feng@starfivetech.com>,
u-boot@lists.denx.de
Subject: [PATCH v2 08/14] riscv: dts: jh7110: Move common code to the new jh7110-common-u-boot.dtsi
Date: Mon, 28 Oct 2024 09:58:41 +0800 [thread overview]
Message-ID: <20241028015847.42344-9-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20241028015847.42344-1-hal.feng@starfivetech.com>
To support JH7110 based boards besides v1.3B,
add a common dtsi and add common code to it.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
arch/riscv/dts/jh7110-common-u-boot.dtsi | 150 ++++++++++++++++++
...10-starfive-visionfive-2-v1.3b-u-boot.dtsi | 146 +----------------
2 files changed, 151 insertions(+), 145 deletions(-)
create mode 100644 arch/riscv/dts/jh7110-common-u-boot.dtsi
diff --git a/arch/riscv/dts/jh7110-common-u-boot.dtsi b/arch/riscv/dts/jh7110-common-u-boot.dtsi
new file mode 100644
index 0000000000..cfd3c04aec
--- /dev/null
+++ b/arch/riscv/dts/jh7110-common-u-boot.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ */
+
+#include "binman.dtsi"
+#include "jh7110-u-boot.dtsi"
+/ {
+ aliases {
+ spi0 = &qspi;
+ };
+
+ chosen {
+ bootph-pre-ram;
+ };
+
+ firmware {
+ spi0 = &qspi;
+ bootph-pre-ram;
+ };
+
+ config {
+ bootph-pre-ram;
+ u-boot,spl-payload-offset = <0x100000>;
+ };
+
+ memory@40000000 {
+ bootph-pre-ram;
+ };
+};
+
+&uart0 {
+ bootph-pre-ram;
+ reg-offset = <0>;
+ current-speed = <115200>;
+ clock-frequency = <24000000>;
+};
+
+&mmc0 {
+ bootph-pre-ram;
+ compatible = "snps,dw-mshc";
+};
+
+&mmc1 {
+ bootph-pre-ram;
+ compatible = "snps,dw-mshc";
+};
+
+&qspi {
+ bootph-pre-ram;
+ spi-max-frequency = <250000000>;
+
+ flash@0 {
+ bootph-pre-ram;
+ /delete-property/ cdns,read-delay;
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&syscrg {
+ assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_ROOT>,
+ <&syscrg JH7110_SYSCLK_BUS_ROOT>,
+ <&syscrg JH7110_SYSCLK_PERH_ROOT>,
+ <&syscrg JH7110_SYSCLK_QSPI_REF>;
+ assigned-clock-parents = <&pllclk JH7110_PLLCLK_PLL0_OUT>,
+ <&pllclk JH7110_PLLCLK_PLL2_OUT>,
+ <&pllclk JH7110_PLLCLK_PLL2_OUT>,
+ <&syscrg JH7110_SYSCLK_QSPI_REF_SRC>;
+ assigned-clock-rates = <0>, <0>, <0>, <0>;
+};
+
+&aoncrg {
+ assigned-clocks = <&aoncrg JH7110_AONCLK_APB_FUNC>;
+ assigned-clock-parents = <&osc>;
+ assigned-clock-rates = <0>;
+};
+
+&sysgpio {
+ bootph-pre-ram;
+};
+
+&mmc0_pins {
+ bootph-pre-ram;
+ rst-pins {
+ bootph-pre-ram;
+ };
+};
+
+&mmc1_pins {
+ bootph-pre-ram;
+ clk-pins {
+ bootph-pre-ram;
+ };
+
+ mmc-pins {
+ bootph-pre-ram;
+ };
+};
+
+&i2c5_pins {
+ bootph-pre-ram;
+ i2c-pins {
+ bootph-pre-ram;
+ };
+};
+
+&i2c5 {
+ bootph-pre-ram;
+ eeprom@50 {
+ bootph-pre-ram;
+ compatible = "atmel,24c04";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
+&binman {
+ itb {
+ fit {
+ images {
+ fdt-1 {
+ description = "NAME";
+ load = <0x40400000>;
+ compression = "none";
+
+ uboot_fdt_blob: blob-ext {
+ filename = "u-boot.dtb";
+ };
+ };
+ };
+
+ configurations {
+ conf-1 {
+ fdt = "fdt-1";
+ };
+ };
+ };
+ };
+
+ spl-img {
+ filename = "spl/u-boot-spl.bin.normal.out";
+
+ mkimage {
+ args = "-T sfspl";
+
+ u-boot-spl {
+ };
+ };
+ };
+};
diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
index 2b063414e5..f4807957ae 100644
--- a/arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
+++ b/arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
@@ -3,48 +3,7 @@
* Copyright (C) 2023 StarFive Technology Co., Ltd.
*/
-#include "binman.dtsi"
-#include "jh7110-u-boot.dtsi"
-/ {
- aliases {
- spi0 = &qspi;
- };
-
- chosen {
- bootph-pre-ram;
- };
-
- firmware {
- spi0 = &qspi;
- bootph-pre-ram;
- };
-
- config {
- bootph-pre-ram;
- u-boot,spl-payload-offset = <0x100000>;
- };
-
- memory@40000000 {
- bootph-pre-ram;
- };
-};
-
-&uart0 {
- bootph-pre-ram;
- reg-offset = <0>;
- current-speed = <115200>;
- clock-frequency = <24000000>;
-};
-
-&mmc0 {
- bootph-pre-ram;
- compatible = "snps,dw-mshc";
-};
-
-&mmc1 {
- bootph-pre-ram;
- compatible = "snps,dw-mshc";
-};
+#include "jh7110-common-u-boot.dtsi"
&phy0 {
rx-internal-delay-ps = <1900>;
@@ -53,106 +12,3 @@
&phy1 {
rx-internal-delay-ps = <0>;
};
-
-&qspi {
- bootph-pre-ram;
- spi-max-frequency = <250000000>;
-
- flash@0 {
- bootph-pre-ram;
- /delete-property/ cdns,read-delay;
- spi-max-frequency = <100000000>;
- };
-};
-
-&syscrg {
- assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_ROOT>,
- <&syscrg JH7110_SYSCLK_BUS_ROOT>,
- <&syscrg JH7110_SYSCLK_PERH_ROOT>,
- <&syscrg JH7110_SYSCLK_QSPI_REF>;
- assigned-clock-parents = <&pllclk JH7110_PLLCLK_PLL0_OUT>,
- <&pllclk JH7110_PLLCLK_PLL2_OUT>,
- <&pllclk JH7110_PLLCLK_PLL2_OUT>,
- <&syscrg JH7110_SYSCLK_QSPI_REF_SRC>;
- assigned-clock-rates = <0>, <0>, <0>, <0>;
-};
-
-&aoncrg {
- assigned-clocks = <&aoncrg JH7110_AONCLK_APB_FUNC>;
- assigned-clock-parents = <&osc>;
- assigned-clock-rates = <0>;
-};
-
-&sysgpio {
- bootph-pre-ram;
-};
-
-&mmc0_pins {
- bootph-pre-ram;
- rst-pins {
- bootph-pre-ram;
- };
-};
-
-&mmc1_pins {
- bootph-pre-ram;
- clk-pins {
- bootph-pre-ram;
- };
-
- mmc-pins {
- bootph-pre-ram;
- };
-};
-
-&i2c5_pins {
- bootph-pre-ram;
- i2c-pins {
- bootph-pre-ram;
- };
-};
-
-&i2c5 {
- bootph-pre-ram;
- eeprom@50 {
- bootph-pre-ram;
- compatible = "atmel,24c04";
- reg = <0x50>;
- pagesize = <16>;
- };
-};
-
-&binman {
- itb {
- fit {
- images {
- fdt-1 {
- description = "NAME";
- load = <0x40400000>;
- compression = "none";
-
- uboot_fdt_blob: blob-ext {
- filename = "u-boot.dtb";
- };
- };
- };
-
- configurations {
- conf-1 {
- fdt = "fdt-1";
- };
- };
- };
- };
-
- spl-img {
- filename = "spl/u-boot-spl.bin.normal.out";
-
- mkimage {
- args = "-T sfspl";
-
- u-boot-spl {
- };
- };
- };
-};
--
2.43.2
next prev parent reply other threads:[~2024-10-28 2:01 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-28 1:58 [PATCH v2 00/14] Support OF_UPSTREAM for StarFive JH7110 Hal Feng
2024-10-28 1:58 ` [PATCH v2 01/14] Makefile: Add OF_UPSTREAM Makefile for RISC-V Hal Feng
2024-10-28 1:58 ` [PATCH v2 02/14] dts: starfive: Switch to using upstream DT Hal Feng
2024-10-28 1:58 ` [PATCH v2 03/14] riscv: dts: jh7110: Drop redundant devicetree files Hal Feng
2024-10-28 1:58 ` [PATCH v2 04/14] dt-bindings: Remove StarFive JH7110 clock and reset definitions Hal Feng
2024-10-28 1:58 ` [PATCH v2 05/14] riscv: dts: jh7110: Make u-boot device trees adapting to upstream DT Hal Feng
2024-10-28 1:58 ` [PATCH v2 06/14] clk: starfive: jh7110: Sync clock definitions with upstream dt-bindings Hal Feng
2024-10-28 1:58 ` [PATCH v2 07/14] pcie: starfive: Make the driver compatible with upstream DT Hal Feng
2024-10-28 1:58 ` Hal Feng [this message]
2024-10-28 1:58 ` [PATCH v2 09/14] riscv: dts: jh7110: Add u-boot device tree for JH7110 based boards Hal Feng
2024-10-28 3:34 ` E Shattow
2024-10-28 1:58 ` [PATCH v2 10/14] board: starfive: spl: Drop the unneeded DT modification code Hal Feng
2024-10-28 1:58 ` [PATCH v2 11/14] configs: visionfive2: Enable MULTI_DTB_FIT for JH7110 based board DT Hal Feng
2024-10-28 1:58 ` [PATCH v2 12/14] riscv: dts: jh7110: Support multiple DTBs in a Fit image Hal Feng
2024-10-28 1:58 ` [PATCH v2 13/14] board: starfive: spl: Fix the wrong use of CONFIG_IS_ENABLED() Hal Feng
2024-10-28 1:58 ` [PATCH v2 14/14] board: starfive: spl: Support multiple DTBs for JH7110 based boards Hal Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241028015847.42344-9-hal.feng@starfivetech.com \
--to=hal.feng@starfivetech.com \
--cc=dmoo_dv@protonmail.com \
--cc=emil.renner.berthing@canonical.com \
--cc=ganboing@gmail.com \
--cc=lucent@gmail.com \
--cc=minda.chen@starfivetech.com \
--cc=namcao@linutronix.de \
--cc=rick@andestech.com \
--cc=sumit.garg@linaro.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=xypron.glpk@gmx.de \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.