All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jakub Kicinski <kuba@kernel.org>
To: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Michael Chan <michael.chan@broadcom.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Paolo Abeni <pabeni@redhat.com>,
	Potnuri Bharat Teja <bharat@chelsio.com>,
	Christian Benvenuti <benve@cisco.com>,
	Satish Kharat <satishkh@cisco.com>,
	Manish Chopra <manishc@marvell.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-hardening@vger.kernel.org
Subject: Re: [PATCH 2/2][next] net: ethtool: Avoid thousands of -Wflex-array-member-not-at-end warnings
Date: Tue, 29 Oct 2024 06:58:24 -0700	[thread overview]
Message-ID: <20241029065824.670f14fc@kernel.org> (raw)
In-Reply-To: <f4f8ca5cd7f039bcab816194342c7b6101e891fe.1729536776.git.gustavoars@kernel.org>

On Mon, 21 Oct 2024 13:02:27 -0600 Gustavo A. R. Silva wrote:
> @@ -3025,7 +3025,7 @@ static int bnxt_set_link_ksettings(struct net_device *dev,
>  {
>  	struct bnxt *bp = netdev_priv(dev);
>  	struct bnxt_link_info *link_info = &bp->link_info;
> -	const struct ethtool_link_settings *base = &lk_ksettings->base;
> +	const struct ethtool_link_settings_hdr *base = &lk_ksettings->base;

Please improve the variable ordering while at it. Longest list first,
so move the @base definition first.

>  	bool set_pause = false;
>  	u32 speed, lanes = 0;
>  	int rc = 0;
> diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
> index 7f3f5afa864f..cc43294bdc96 100644
> --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
> +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
> @@ -663,7 +663,7 @@ static int get_link_ksettings(struct net_device *dev,
>  			      struct ethtool_link_ksettings *link_ksettings)
>  {
>  	struct port_info *pi = netdev_priv(dev);
> -	struct ethtool_link_settings *base = &link_ksettings->base;
> +	struct ethtool_link_settings_hdr *base = &link_ksettings->base;

ditto

>  	/* For the nonce, the Firmware doesn't send up Port State changes
>  	 * when the Virtual Interface attached to the Port is down.  So
> @@ -719,7 +719,7 @@ static int set_link_ksettings(struct net_device *dev,
>  {
>  	struct port_info *pi = netdev_priv(dev);
>  	struct link_config *lc = &pi->link_cfg;
> -	const struct ethtool_link_settings *base = &link_ksettings->base;
> +	const struct ethtool_link_settings_hdr *base = &link_ksettings->base;

and here

>  	struct link_config old_lc;
>  	unsigned int fw_caps;
>  	int ret = 0;
> diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
> index 2fbe0f059a0b..0d85ac342ac7 100644
> --- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
> +++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
> @@ -1437,7 +1437,7 @@ static int cxgb4vf_get_link_ksettings(struct net_device *dev,
>  				  struct ethtool_link_ksettings *link_ksettings)
>  {
>  	struct port_info *pi = netdev_priv(dev);
> -	struct ethtool_link_settings *base = &link_ksettings->base;
> +	struct ethtool_link_settings_hdr *base = &link_ksettings->base;

and here

>  	/* For the nonce, the Firmware doesn't send up Port State changes
>  	 * when the Virtual Interface attached to the Port is down.  So
> diff --git a/drivers/net/ethernet/cisco/enic/enic_ethtool.c b/drivers/net/ethernet/cisco/enic/enic_ethtool.c
> index f7986f2b6a17..8670eb394fad 100644
> --- a/drivers/net/ethernet/cisco/enic/enic_ethtool.c
> +++ b/drivers/net/ethernet/cisco/enic/enic_ethtool.c
> @@ -130,7 +130,7 @@ static int enic_get_ksettings(struct net_device *netdev,
>  			      struct ethtool_link_ksettings *ecmd)
>  {
>  	struct enic *enic = netdev_priv(netdev);
> -	struct ethtool_link_settings *base = &ecmd->base;
> +	struct ethtool_link_settings_hdr *base = &ecmd->base;

and here

>  	ethtool_link_ksettings_add_link_mode(ecmd, supported,
>  					     10000baseT_Full);

> @@ -62,7 +62,7 @@ static int linkmodes_reply_size(const struct ethnl_req_info *req_base,
>  {
>  	const struct linkmodes_reply_data *data = LINKMODES_REPDATA(reply_base);
>  	const struct ethtool_link_ksettings *ksettings = &data->ksettings;
> -	const struct ethtool_link_settings *lsettings = &ksettings->base;
> +	const struct ethtool_link_settings_hdr *lsettings = &ksettings->base;

here it was correct and now its not

>  	bool compact = req_base->flags & ETHTOOL_FLAG_COMPACT_BITSETS;
>  	int len, ret;
>  
> @@ -103,7 +103,7 @@ static int linkmodes_fill_reply(struct sk_buff *skb,
>  {
>  	const struct linkmodes_reply_data *data = LINKMODES_REPDATA(reply_base);
>  	const struct ethtool_link_ksettings *ksettings = &data->ksettings;
> -	const struct ethtool_link_settings *lsettings = &ksettings->base;
> +	const struct ethtool_link_settings_hdr *lsettings = &ksettings->base;

same

>  	bool compact = req_base->flags & ETHTOOL_FLAG_COMPACT_BITSETS;
>  	int ret;

  parent reply	other threads:[~2024-10-29 13:58 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-21 19:01 [PATCH 0/2][next] UAPI: net/ethtool: Avoid thousands of -Wflex-array-member-not-at-end warnings Gustavo A. R. Silva
2024-10-21 19:01 ` [PATCH 1/2][next] UAPI: ethtool: Use __struct_group() in struct ethtool_link_settings Gustavo A. R. Silva
2024-10-21 20:11   ` Andrew Lunn
2024-10-23 21:30     ` Gustavo A. R. Silva
2024-10-21 19:02 ` [PATCH 2/2][next] net: ethtool: Avoid thousands of -Wflex-array-member-not-at-end warnings Gustavo A. R. Silva
2024-10-28 23:21   ` Jakub Kicinski
2024-10-28 23:32     ` Gustavo A. R. Silva
2024-10-29  0:32       ` Jakub Kicinski
2024-10-29  2:37         ` Gustavo A. R. Silva
2024-10-29 13:56           ` Jakub Kicinski
2024-10-29 13:58   ` Jakub Kicinski [this message]
2024-10-29 16:55     ` Gustavo A. R. Silva
2024-10-29 18:08       ` Jakub Kicinski
2024-10-29 18:18         ` Gustavo A. R. Silva
2024-10-29 18:39           ` Jakub Kicinski
2024-10-29 18:48             ` Gustavo A. R. Silva
2024-10-29 18:54               ` Jakub Kicinski
2024-10-29 19:18                 ` Gustavo A. R. Silva
2024-10-29 20:00                   ` Jakub Kicinski
2024-10-29 22:06                     ` Gustavo A. R. Silva

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241029065824.670f14fc@kernel.org \
    --to=kuba@kernel.org \
    --cc=andrew+netdev@lunn.ch \
    --cc=benve@cisco.com \
    --cc=bharat@chelsio.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=gustavoars@kernel.org \
    --cc=linux-hardening@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manishc@marvell.com \
    --cc=michael.chan@broadcom.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=satishkh@cisco.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.