* [PATCH v3 0/2] Add a driver for the Iron Device SMA1307 Amp
[not found] <20241104-irondevice-sma1307-v3-0-4bbe79895f54@irondevice.com>
@ 2024-11-04 7:33 ` Ki-Seok Jo
[not found] ` <20241104-irondevice-sma1307-v3-1-4bbe79895f54@irondevice.com>
[not found] ` <20241104-irondevice-sma1307-v3-2-4bbe79895f54@irondevice.com>
2 siblings, 0 replies; 9+ messages in thread
From: Ki-Seok Jo @ 2024-11-04 7:33 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Jaroslav Kysela, Takashi Iwai
Cc: alsa-devel@alsa-project.org, linux-sound@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
This adds basic audio support for the Iron Device SMA1307 amplifier
Signed-off-by: Kiseok Jo <kiseok.jo@irondevice.com>
---
Kiseok Jo (2):
ASoC: dt-bindings: irondevice,sma1307: Add initial DT binding
ASoC: sma1307: Add driver for Iron Device SMA1307
.../bindings/sound/irondevice,sma1307.yaml | 54 +
To | 0
sound/soc/codecs/Kconfig | 10 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/sma1307.c | 2052 ++++++++++++++++++++
sound/soc/codecs/sma1307.h | 444 +++++
6 files changed, 2562 insertions(+)
---
base-commit: 06df5968fd2f418b5729c43fffd65388ef0448f4
change-id: 20241007-irondevice-sma1307-ffc42b218574
Best regards,
--
Kiseok Jo <kiseok.jo@irondevice.com>
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v3 1/2] ASoC: dt-bindings: irondevice,sma1307: Add initial DT binding
[not found] ` <20241104-irondevice-sma1307-v3-1-4bbe79895f54@irondevice.com>
@ 2024-11-04 7:33 ` Ki-Seok Jo
2024-11-04 16:17 ` Rob Herring
2024-11-07 21:52 ` Mark Brown
0 siblings, 2 replies; 9+ messages in thread
From: Ki-Seok Jo @ 2024-11-04 7:33 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Jaroslav Kysela, Takashi Iwai
Cc: alsa-devel@alsa-project.org, linux-sound@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
This adds the schema binding for the Iron Device SMA1307 Amp
Signed-off-by: Kiseok Jo <kiseok.jo@irondevice.com>
---
.../bindings/sound/irondevice,sma1307.yaml | 54 ++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/irondevice,sma1307.yaml b/Documentation/devicetree/bindings/sound/irondevice,sma1307.yaml
new file mode 100644
index 000000000..0bb4ee664
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/irondevice,sma1307.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/irondevice,sma1307.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Iron Device SMA1307 Audio Amplifier
+
+maintainers:
+ - Kiseok Jo <kiseok.jo@irondevice.com>
+
+description:
+ SMA1307 boosted digital speaker amplifier
+ with feedback-loop.
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - irondevice,sma1307a
+ - irondevice,sma1307aq
+ description:
+ If a 'q' is added, it indicated the product is AEC-Q100
+ qualified for automotive applications. SMA1307A supports
+ both WLCSP and QFN packages. However, SMA1307AQ only
+ supports the QFN package.
+
+ reg:
+ maxItems: 1
+
+ '#sound-dai-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ amplifier@1e {
+ compatible = "irondevice,sma1307a";
+ reg = <0x1e>;
+ #sound-dai-cells = <1>;
+ };
+ };
--
2.39.2
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v3 2/2] ASoC: sma1307: Add driver for Iron Device SMA1307
[not found] ` <20241104-irondevice-sma1307-v3-2-4bbe79895f54@irondevice.com>
@ 2024-11-04 7:33 ` Ki-Seok Jo
2024-11-04 14:03 ` Mark Brown
0 siblings, 1 reply; 9+ messages in thread
From: Ki-Seok Jo @ 2024-11-04 7:33 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Jaroslav Kysela, Takashi Iwai
Cc: alsa-devel@alsa-project.org, linux-sound@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
The Iron Device SMA1307 is a boosted digital speaker amplifier
v2 -> v3
- Use BIT() macro
- Changed the value in sizeof
- Designated as const
- Removed the retry functionality from the regmap functions
- Removed the remove callback function from the component driver
- Added match data and I2C ID table
- Applied the value when setting the binary mode
- Removed unused variable
- Removed some error log
- Removed cache_type member
- Changed the configuration for one shot control
- Modified the 'Amp Enable Switch' and 'Binary Mode Control'
- Removed the reutrn value for regmap
- Change 'check fault' from sysfs to ALSA control
- Fix for the error in workqueue polling operation
- Uevent configuration in fault situation
- Fixed typos
Signed-off-by: Kiseok Jo <kiseok.jo@irondevice.com>
---
To | 0
sound/soc/codecs/Kconfig | 10 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/sma1307.c | 2052 ++++++++++++++++++++++++++++++++++++++++++++
sound/soc/codecs/sma1307.h | 444 ++++++++++
5 files changed, 2508 insertions(+)
diff --git a/To b/To
new file mode 100644
index 000000000..e69de29bb
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index c6c4c7481..3484a3f68 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -236,6 +236,7 @@ config SND_SOC_ALL_CODECS
imply SND_SOC_SIMPLE_AMPLIFIER
imply SND_SOC_SIMPLE_MUX
imply SND_SOC_SMA1303
+ imply SND_SOC_SMA1307
imply SND_SOC_SPDIF
imply SND_SOC_SRC4XXX_I2C
imply SND_SOC_SSM2305
@@ -1836,6 +1837,15 @@ config SND_SOC_SMA1303
help
Enable support for Iron Device SMA1303 Boosted Class-D amplifier
+config SND_SOC_SMA1307
+ tristate "Iron Device SMA1307 Audio Amplifier"
+ depends on I2C
+ help
+ Enable support for Iron Device SMA1307 boosted digital speaker
+ amplifier with feedback-loop.
+ If you are using a system with an SMA1307 amplifier connected
+ via I2C, enable this option.
+
config SND_SOC_SPDIF
tristate "S/PDIF CODEC"
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 850c6249e..4b29fd4bd 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -274,6 +274,7 @@ snd-soc-sigmadsp-i2c-y := sigmadsp-i2c.o
snd-soc-sigmadsp-regmap-y := sigmadsp-regmap.o
snd-soc-si476x-y := si476x.o
snd-soc-sma1303-y := sma1303.o
+snd-soc-sma1307-y := sma1307.o
snd-soc-spdif-tx-y := spdif_transmitter.o
snd-soc-spdif-rx-y := spdif_receiver.o
snd-soc-src4xxx-y := src4xxx.o
@@ -678,6 +679,7 @@ obj-$(CONFIG_SND_SOC_SIGMADSP_I2C) += snd-soc-sigmadsp-i2c.o
obj-$(CONFIG_SND_SOC_SIGMADSP_REGMAP) += snd-soc-sigmadsp-regmap.o
obj-$(CONFIG_SND_SOC_SI476X) += snd-soc-si476x.o
obj-$(CONFIG_SND_SOC_SMA1303) += snd-soc-sma1303.o
+obj-$(CONFIG_SND_SOC_SMA1307) += snd-soc-sma1307.o
obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif-rx.o snd-soc-spdif-tx.o
obj-$(CONFIG_SND_SOC_SRC4XXX) += snd-soc-src4xxx.o
obj-$(CONFIG_SND_SOC_SRC4XXX_I2C) += snd-soc-src4xxx-i2c.o
diff --git a/sound/soc/codecs/sma1307.c b/sound/soc/codecs/sma1307.c
new file mode 100644
index 000000000..985a247b3
--- /dev/null
+++ b/sound/soc/codecs/sma1307.c
@@ -0,0 +1,2052 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// sma1307.c -- sma1307 ALSA SoC Audio driver
+//
+// Copyright 2024 Iron Device Corporation
+//
+// Auther: Gyuhwa Park <gyuwha.park@irondevice.com>
+// Auther: Kiseok Jo <kiseok.jo@irondevice.com>
+
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <sound/pcm_params.h>
+#include <sound/tlv.h>
+#include "sma1307.h"
+
+#define CHECK_PERIOD_TIME 1 /* sec per HZ */
+#define PLL_MATCH(_input_clk_name, _output_clk_name, _input_clk,\
+ _post_n, _n, _vco, _p_cp)\
+{\
+ .input_clk_name = _input_clk_name,\
+ .output_clk_name = _output_clk_name,\
+ .input_clk = _input_clk,\
+ .post_n = _post_n,\
+ .n = _n,\
+ .vco = _vco,\
+ .p_cp = _p_cp,\
+}
+
+static const char *setting_file = "sma1307_setting.bin";
+#define SMA1307_SETTING_CHECKSUM 0x100000
+
+/* PLL clock setting Table */
+struct sma1307_pll_match {
+ char *input_clk_name;
+ char *output_clk_name;
+ unsigned int input_clk;
+ unsigned int post_n;
+ unsigned int n;
+ unsigned int vco;
+ unsigned int p_cp;
+};
+
+struct sma1307_data {
+ char *name;
+ void (*init)(struct regmap *regmap);
+};
+
+struct sma1307_priv {
+ bool check_fault_status;
+ bool force_mute_status;
+ bool sw_ot1_prot;
+ char *name;
+ enum sma1307_mode amp_mode;
+ int binary_mode;
+ int dapm_aif_in;
+ int dapm_aif_out0;
+ int dapm_aif_out1;
+ int dapm_sdo_en;
+ int dapm_sdo_setting;
+ int num_of_pll_matches;
+ int check_fault_period;
+ struct delayed_work check_fault_work;
+ struct device *dev;
+ struct kobject *kobj;
+ struct mutex default_lock;
+ struct regmap *regmap;
+ struct sma1307_setting_file set;
+ const struct sma1307_pll_match *pll_matches;
+ const struct sma1307_data *data;
+ unsigned int cur_vol;
+ unsigned int format;
+ unsigned int frame_size;
+ unsigned int init_vol;
+ unsigned int last_bclk;
+ unsigned int otp_trm2;
+ unsigned int otp_trm3;
+ unsigned int rev_num;
+ unsigned int sys_clk_id;
+ unsigned int tdm_slot0_rx;
+ unsigned int tdm_slot1_rx;
+ unsigned int tdm_slot0_tx;
+ unsigned int tdm_slot1_tx;
+ unsigned int tsdw_cnt;
+};
+
+static const struct sma1307_pll_match sma1307_pll_matches[] = {
+ /* in_clk_name, out_clk_name, input_clk post_n, n, vco, p_cp */
+ PLL_MATCH("1.411MHz", "24.554MHz",
+ 1411200, 0x06, 0xD1, 0x88, 0x00),
+ PLL_MATCH("1.536MHz", "24.576MHz",
+ 1536000, 0x06, 0xC0, 0x88, 0x00),
+ PLL_MATCH("2.822MHz", "24.554MHz",
+ 2822400, 0x06, 0xD1, 0x88, 0x04),
+ PLL_MATCH("3.072MHz", "24.576MHz",
+ 3072000, 0x06, 0x60, 0x88, 0x00),
+ PLL_MATCH("6.144MHz", "24.576MHz",
+ 6144000, 0x06, 0x60, 0x88, 0x04),
+ PLL_MATCH("12.288MHz", "24.576MHz",
+ 12288000, 0x06, 0x60, 0x88, 0x08),
+ PLL_MATCH("19.2MHz", "24.48MHz",
+ 19200000, 0x06, 0x7B, 0x88, 0x0C),
+ PLL_MATCH("24.576MHz", "24.576MHz",
+ 24576000, 0x06, 0x60, 0x88, 0x0C),
+};
+
+static struct snd_soc_component *sma1307_amp_component;
+
+static void sma1307_startup(struct snd_soc_component *);
+static void sma1307_shutdown(struct snd_soc_component *);
+static void sma1307_reset(struct snd_soc_component *);
+static void sma1307_set_binary(struct snd_soc_component *);
+static void sma1307_set_default(struct snd_soc_component *);
+
+/* Initial register value - 6.0W SPK (8ohm load) */
+static const struct reg_default sma1307_reg_def[] = {
+ { 0x00, 0x80 },
+ { 0x01, 0x00 },
+ { 0x02, 0x52 },
+ { 0x03, 0x4C },
+ { 0x04, 0x47 },
+ { 0x05, 0x42 },
+ { 0x06, 0x40 },
+ { 0x07, 0x40 },
+ { 0x08, 0x3C },
+ { 0x09, 0x2F },
+ { 0x0A, 0x32 },
+ { 0x0B, 0x50 },
+ { 0x0C, 0x8C },
+ { 0x0D, 0x00 },
+ { 0x0E, 0x3F },
+ { 0x0F, 0x00 },
+ { 0x10, 0x00 },
+ { 0x11, 0x00 },
+ { 0x12, 0x00 },
+ { 0x13, 0x09 },
+ { 0x14, 0x12 },
+ { 0x1C, 0x00 },
+ { 0x1D, 0x85 },
+ { 0x1E, 0xA1 },
+ { 0x1F, 0x67 },
+ { 0x22, 0x00 },
+ { 0x23, 0x1F },
+ { 0x24, 0x7A },
+ { 0x25, 0x00 },
+ { 0x26, 0xFF },
+ { 0x27, 0x39 },
+ { 0x28, 0x54 },
+ { 0x29, 0x92 },
+ { 0x2A, 0xB0 },
+ { 0x2B, 0xED },
+ { 0x2C, 0xED },
+ { 0x2D, 0xFF },
+ { 0x2E, 0xFF },
+ { 0x2F, 0xFF },
+ { 0x30, 0xFF },
+ { 0x31, 0xFF },
+ { 0x32, 0xFF },
+ { 0x34, 0x01 },
+ { 0x35, 0x17 },
+ { 0x36, 0x92 },
+ { 0x37, 0x00 },
+ { 0x38, 0x01 },
+ { 0x39, 0x10 },
+ { 0x3E, 0x01 },
+ { 0x3F, 0x08 },
+ { 0x8B, 0x05 },
+ { 0x8C, 0x50 },
+ { 0x8D, 0x80 },
+ { 0x8E, 0x10 },
+ { 0x8F, 0x02 },
+ { 0x90, 0x02 },
+ { 0x91, 0x83 },
+ { 0x92, 0xC0 },
+ { 0x93, 0x00 },
+ { 0x94, 0xA4 },
+ { 0x95, 0x74 },
+ { 0x96, 0x57 },
+ { 0xA2, 0xCC },
+ { 0xA3, 0x28 },
+ { 0xA4, 0x40 },
+ { 0xA5, 0x01 },
+ { 0xA6, 0x41 },
+ { 0xA7, 0x08 },
+ { 0xA8, 0x04 },
+ { 0xA9, 0x27 },
+ { 0xAA, 0x10 },
+ { 0xAB, 0x10 },
+ { 0xAC, 0x10 },
+ { 0xAD, 0x0F },
+ { 0xAE, 0xCD },
+ { 0xAF, 0x70 },
+ { 0xB0, 0x03 },
+ { 0xB1, 0xEF },
+ { 0xB2, 0x03 },
+ { 0xB3, 0xEF },
+ { 0xB4, 0xF3 },
+ { 0xB5, 0x3D },
+};
+
+static bool sma1307_readable_register(struct device *dev, unsigned int reg)
+{
+ if (reg > SMA1307_FF_DEVICE_INDEX)
+ return false;
+
+ switch (reg) {
+ case SMA1307_00_SYSTEM_CTRL ... SMA1307_1F_TONE_FINE_VOLUME:
+ case SMA1307_22_COMP_HYS_SEL ... SMA1307_32_BROWN_OUT_PROT19:
+ case SMA1307_34_OCP_SPK ... SMA1307_39_PMT_NZ_VAL:
+ case SMA1307_3B_TEST1 ... SMA1307_3F_ATEST2:
+ case SMA1307_8B_PLL_POST_N ... SMA1307_9A_OTP_TRM3:
+ case SMA1307_A0_PAD_CTRL0 ... SMA1307_BE_MCBS_CTRL2:
+ case SMA1307_F5_READY_FOR_V_SAR:
+ case SMA1307_F7_READY_FOR_T_SAR ... SMA1307_FF_DEVICE_INDEX:
+ break;
+ default:
+ return false;
+ }
+ return true;
+}
+
+static bool sma1307_writeable_register(struct device *dev, unsigned int reg)
+{
+ if (reg > SMA1307_FF_DEVICE_INDEX)
+ return false;
+
+ switch (reg) {
+ case SMA1307_00_SYSTEM_CTRL ... SMA1307_1F_TONE_FINE_VOLUME:
+ case SMA1307_22_COMP_HYS_SEL ... SMA1307_32_BROWN_OUT_PROT19:
+ case SMA1307_34_OCP_SPK ... SMA1307_39_PMT_NZ_VAL:
+ case SMA1307_3B_TEST1 ... SMA1307_3F_ATEST2:
+ case SMA1307_8B_PLL_POST_N ... SMA1307_9A_OTP_TRM3:
+ case SMA1307_A0_PAD_CTRL0 ... SMA1307_BE_MCBS_CTRL2:
+ break;
+ default:
+ return false;
+ }
+ return true;
+}
+
+static bool sma1307_volatile_register(struct device *dev, unsigned int reg)
+{
+ if (reg > SMA1307_FF_DEVICE_INDEX)
+ return false;
+
+ switch (reg) {
+ case SMA1307_F8_STATUS_T1 ... SMA1307_FF_DEVICE_INDEX:
+ break;
+ default:
+ return false;
+ }
+ return true;
+}
+
+/* DB scale conversion of speaker volume */
+static const DECLARE_TLV_DB_SCALE(sma1307_spk_tlv, -6000, 50, 0);
+
+static const char *const sma1307_aif_in_source_text[] = {
+ "Mono", "Left", "Right"
+};
+
+static const char *const sma1307_sdo_setting_text[] = {
+ "Data_One_48k", "Data_Two_48k", "Data_Two_24k",
+ "Clk_PLL", "Clk_OSC"
+};
+
+static const char *const sma1307_aif_out_source_text[] = {
+ "Disable", "After_FmtC", "After_Mixer", "After_DSP",
+ "Vrms2_Avg", "Battery", "Temperature", "After_Delay"
+};
+
+static const char *const sma1307_tdm_slot_text[] = {
+ "Slot0", "Slot1", "Slot2", "Slot3",
+ "Slot4", "Slot5", "Slot6", "Slot7"
+};
+
+static const char *const sma1307_binary_mode_text[] = {
+ "Mode0", "Mode1", "Mode2", "Mode3", "Mode4"
+};
+
+static const char *const sma1307_reset_text[] = {
+ "Reset"
+};
+
+static const struct soc_enum sma1307_aif_in_source_enum =
+SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1307_aif_in_source_text),
+ sma1307_aif_in_source_text);
+static const struct soc_enum sma1307_sdo_setting_enum =
+SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1307_sdo_setting_text),
+ sma1307_sdo_setting_text);
+static const struct soc_enum sma1307_aif_out_source_enum =
+SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1307_aif_out_source_text),
+ sma1307_aif_out_source_text);
+static const struct soc_enum sma1307_tdm_slot_enum =
+SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1307_tdm_slot_text),
+ sma1307_tdm_slot_text);
+static const struct soc_enum sma1307_binary_mode_enum =
+SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1307_binary_mode_text),
+ sma1307_binary_mode_text);
+static const struct soc_enum sma1307_reset_enum =
+SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1307_reset_text),
+ sma1307_reset_text);
+
+static int sma1307_force_mute_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component =
+ snd_soc_kcontrol_component(kcontrol);
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+
+ ucontrol->value.integer.value[0] = (int)sma1307->force_mute_status;
+
+ return 0;
+}
+
+static int sma1307_force_mute_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component =
+ snd_soc_kcontrol_component(kcontrol);
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+ bool change = false, val = (bool)ucontrol->value.integer.value[0];
+
+ if (sma1307->force_mute_status == val) {
+ change = false;
+ } else {
+ change = true;
+ sma1307->force_mute_status = val;
+ }
+
+ return change;
+}
+
+static int sma1307_tdm_slot_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component =
+ snd_soc_kcontrol_component(kcontrol);
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+ int val1, val2;
+
+ regmap_read(sma1307->regmap, SMA1307_A5_TDM1, &val1);
+ regmap_read(sma1307->regmap, SMA1307_A6_TDM2, &val2);
+
+ if (!strcmp(kcontrol->id.name, SMA1307_TDM_RX0_POS_NAME)) {
+ ucontrol->value.integer.value[0]
+ = (val1 & SMA1307_TDM_SLOT0_RX_POS_MASK) >> 3;
+ sma1307->tdm_slot0_rx = ucontrol->value.integer.value[0];
+ } else if (!strcmp(kcontrol->id.name, SMA1307_TDM_RX1_POS_NAME)) {
+ ucontrol->value.integer.value[0]
+ = val1 & SMA1307_TDM_SLOT1_RX_POS_MASK;
+ sma1307->tdm_slot1_rx = ucontrol->value.integer.value[0];
+ } else if (!strcmp(kcontrol->id.name, SMA1307_TDM_TX0_POS_NAME)) {
+ ucontrol->value.integer.value[0]
+ = (val2 & SMA1307_TDM_SLOT0_TX_POS_MASK) >> 3;
+ sma1307->tdm_slot0_tx = ucontrol->value.integer.value[0];
+ } else if (!strcmp(kcontrol->id.name, SMA1307_TDM_TX1_POS_NAME)) {
+ ucontrol->value.integer.value[0]
+ = val2 & SMA1307_TDM_SLOT1_TX_POS_MASK;
+ sma1307->tdm_slot1_tx = ucontrol->value.integer.value[0];
+ } else {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sma1307_tdm_slot_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component =
+ snd_soc_kcontrol_component(kcontrol);
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+ int val = (int)ucontrol->value.integer.value[0];
+ bool change;
+
+ if (!strcmp(kcontrol->id.name, SMA1307_TDM_RX0_POS_NAME)) {
+ if (sma1307->tdm_slot0_rx == val)
+ change = false;
+ else {
+ change = true;
+ sma1307->tdm_slot0_rx = val;
+ regmap_update_bits(sma1307->regmap, SMA1307_A5_TDM1,
+ SMA1307_TDM_SLOT0_RX_POS_MASK, val << 3);
+ }
+ } else if (!strcmp(kcontrol->id.name, SMA1307_TDM_RX1_POS_NAME)) {
+ if (sma1307->tdm_slot1_rx == val)
+ change = false;
+ else {
+ change = true;
+ sma1307->tdm_slot1_rx = val;
+ regmap_update_bits(sma1307->regmap, SMA1307_A5_TDM1,
+ SMA1307_TDM_SLOT1_RX_POS_MASK, val);
+ }
+ } else if (!strcmp(kcontrol->id.name, SMA1307_TDM_TX0_POS_NAME)) {
+ if (sma1307->tdm_slot0_tx == val)
+ change = false;
+ else {
+ change = true;
+ sma1307->tdm_slot0_tx = val;
+ regmap_update_bits(sma1307->regmap, SMA1307_A6_TDM2,
+ SMA1307_TDM_SLOT0_TX_POS_MASK, val << 3);
+ }
+ } else if (!strcmp(kcontrol->id.name, SMA1307_TDM_TX1_POS_NAME)) {
+ if (sma1307->tdm_slot1_tx == val)
+ change = false;
+ else {
+ change = true;
+ sma1307->tdm_slot1_tx = val;
+ regmap_update_bits(sma1307->regmap, SMA1307_A6_TDM2,
+ SMA1307_TDM_SLOT1_TX_POS_MASK, val);
+ }
+ } else {
+ dev_err(sma1307->dev, "%s: Invalid Control ID - %s\n",
+ __func__, kcontrol->id.name);
+ return -EINVAL;
+ }
+
+ return change;
+}
+
+static int sma1307_sw_ot1_prot_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component =
+ snd_soc_kcontrol_component(kcontrol);
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+
+ ucontrol->value.integer.value[0] = (int)sma1307->sw_ot1_prot;
+
+ return 0;
+}
+
+static int sma1307_sw_ot1_prot_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component =
+ snd_soc_kcontrol_component(kcontrol);
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+ bool change = false, val = (bool)ucontrol->value.integer.value[0];
+
+ if (sma1307->sw_ot1_prot == val)
+ change = false;
+ else {
+ change = true;
+ sma1307->sw_ot1_prot = val;
+ }
+
+ return change;
+}
+
+static int sma1307_check_fault_status_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component =
+ snd_soc_kcontrol_component(kcontrol);
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+
+ ucontrol->value.integer.value[0] = (int)sma1307->check_fault_status;
+
+ return 0;
+}
+
+static int sma1307_check_fault_status_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component =
+ snd_soc_kcontrol_component(kcontrol);
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+ bool change = false, val = (bool)ucontrol->value.integer.value[0];
+
+ if (sma1307->check_fault_status == val) {
+ change = false;
+ } else {
+ change = true;
+ sma1307->check_fault_status = val;
+ }
+
+ return change;
+}
+
+static int sma1307_check_fault_period_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component =
+ snd_soc_kcontrol_component(kcontrol);
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+
+ ucontrol->value.integer.value[0] = sma1307->check_fault_period;
+
+ return 0;
+}
+
+static int sma1307_check_fault_period_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component =
+ snd_soc_kcontrol_component(kcontrol);
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ bool change = false;
+ int val = ucontrol->value.integer.value[0];
+
+ if (val < mc->min || val > mc->max)
+ return -EINVAL;
+ if (sma1307->check_fault_period == val) {
+ change = false;
+ } else {
+ change = true;
+ sma1307->check_fault_period = val;
+ }
+
+ return change;
+}
+
+static int sma1307_reset_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component =
+ snd_soc_kcontrol_component(kcontrol);
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+
+ regmap_update_bits(sma1307->regmap, SMA1307_00_SYSTEM_CTRL,
+ SMA1307_RESET_MASK, SMA1307_RESET_ON);
+ sma1307_reset(component);
+
+ snd_ctl_notify(component->card->snd_card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &kcontrol->id);
+
+ return true;
+}
+
+static int sma1307_binary_mode_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component =
+ snd_soc_kcontrol_component(kcontrol);
+ struct sma1307_priv *sma1307 = snd_kcontrol_chip(kcontrol);
+
+ sma1307->binary_mode = (int)ucontrol->value.enumerated.item[0];
+ if (sma1307->set.status)
+ sma1307_set_binary(component);
+
+ return snd_soc_put_enum_double(kcontrol, ucontrol);
+}
+
+static void sma1307_startup(struct snd_soc_component *component)
+{
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+
+ regmap_update_bits(sma1307->regmap, SMA1307_A2_TOP_MAN1,
+ SMA1307_PLL_MASK, SMA1307_PLL_ON);
+ regmap_update_bits(sma1307->regmap, SMA1307_00_SYSTEM_CTRL,
+ SMA1307_POWER_MASK, SMA1307_POWER_ON);
+
+ if (sma1307->amp_mode == SMA1307_MONO_MODE) {
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_10_SYSTEM_CTRL1,
+ SMA1307_SPK_MODE_MASK,
+ SMA1307_SPK_MONO);
+ } else {
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_10_SYSTEM_CTRL1,
+ SMA1307_SPK_MODE_MASK,
+ SMA1307_SPK_STEREO);
+ }
+
+ if (sma1307->check_fault_status) {
+ if (sma1307->check_fault_period > 0)
+ queue_delayed_work(system_freezable_wq,
+ &sma1307->check_fault_work,
+ sma1307->check_fault_period * HZ);
+ else
+ queue_delayed_work(system_freezable_wq,
+ &sma1307->check_fault_work,
+ CHECK_PERIOD_TIME * HZ);
+ }
+}
+
+static void sma1307_shutdown(struct snd_soc_component *component)
+{
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+
+ /* for SMA1307A */
+ cancel_delayed_work_sync(&sma1307->check_fault_work);
+
+ regmap_update_bits(sma1307->regmap, SMA1307_0E_MUTE_VOL_CTRL,
+ SMA1307_SPK_MUTE_MASK, SMA1307_SPK_MUTE);
+ /* Need to wait time for mute slope */
+ msleep(55);
+
+ regmap_update_bits(sma1307->regmap, SMA1307_10_SYSTEM_CTRL1,
+ SMA1307_SPK_MODE_MASK, SMA1307_SPK_OFF);
+ regmap_update_bits(sma1307->regmap, SMA1307_A2_TOP_MAN1,
+ SMA1307_PLL_MASK, SMA1307_PLL_OFF);
+ regmap_update_bits(sma1307->regmap, SMA1307_00_SYSTEM_CTRL,
+ SMA1307_POWER_MASK, SMA1307_POWER_OFF);
+}
+
+static int sma1307_aif_in_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+ unsigned int mux = sma1307->dapm_aif_in;
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ switch (mux) {
+ case SMA1307_MONO_MODE:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_11_SYSTEM_CTRL2,
+ SMA1307_MONOMIX_MASK,
+ SMA1307_MONOMIX_ON);
+ break;
+ case SMA1307_LEFT_MODE:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_11_SYSTEM_CTRL2,
+ SMA1307_MONOMIX_MASK,
+ SMA1307_MONOMIX_OFF);
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_11_SYSTEM_CTRL2,
+ SMA1307_LR_DATA_SW_MASK,
+ SMA1307_LR_DATA_SW_NORMAL);
+ break;
+ case SMA1307_RIGHT_MODE:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_11_SYSTEM_CTRL2,
+ SMA1307_MONOMIX_MASK,
+ SMA1307_MONOMIX_OFF);
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_11_SYSTEM_CTRL2,
+ SMA1307_LR_DATA_SW_MASK,
+ SMA1307_LR_DATA_SW_SWAP);
+ break;
+ default:
+
+ dev_err(sma1307->dev, "%s: Invalid value (%d)\n",
+ __func__, mux);
+ return -EINVAL;
+ }
+ sma1307->amp_mode = mux;
+ break;
+ }
+ return 0;
+}
+
+static int sma1307_sdo_setting_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+ unsigned int mux = sma1307->dapm_sdo_setting;
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ switch (mux) {
+ case SMA1307_OUT_DATA_ONE_48K:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A2_TOP_MAN1,
+ SMA1307_SDO_OUTPUT2_MASK,
+ SMA1307_ONE_SDO_PER_CH);
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A3_TOP_MAN2,
+ SMA1307_SDO_OUTPUT3_MASK
+ |
+ SMA1307_DATA_CLK_SEL_MASK,
+ SMA1307_SDO_OUTPUT3_DIS
+ | SMA1307_SDO_DATA);
+ break;
+ case SMA1307_OUT_DATA_TWO_48K:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A2_TOP_MAN1,
+ SMA1307_SDO_OUTPUT2_MASK,
+ SMA1307_TWO_SDO_PER_CH);
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A3_TOP_MAN2,
+ SMA1307_SDO_OUTPUT3_MASK
+ |
+ SMA1307_DATA_CLK_SEL_MASK,
+ SMA1307_SDO_OUTPUT3_DIS
+ | SMA1307_SDO_DATA);
+ break;
+ case SMA1307_OUT_DATA_TWO_24K:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A2_TOP_MAN1,
+ SMA1307_SDO_OUTPUT2_MASK,
+ SMA1307_TWO_SDO_PER_CH);
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A3_TOP_MAN2,
+ SMA1307_SDO_OUTPUT3_MASK
+ |
+ SMA1307_DATA_CLK_SEL_MASK,
+ SMA1307_TWO_SDO_PER_CH_24K
+ | SMA1307_SDO_DATA);
+ break;
+ case SMA1307_OUT_CLK_PLL:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A3_TOP_MAN2,
+ SMA1307_DATA_CLK_SEL_MASK,
+ SMA1307_SDO_CLK_PLL);
+
+ break;
+ case SMA1307_OUT_CLK_OSC:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A3_TOP_MAN2,
+ SMA1307_DATA_CLK_SEL_MASK,
+ SMA1307_SDO_CLK_OSC);
+
+ break;
+ default:
+ dev_err(sma1307->dev, "%s: Invalid value (%d)\n",
+ __func__, mux);
+ return -EINVAL;
+ }
+ break;
+ }
+ return 0;
+}
+
+static int sma1307_aif_out_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+ unsigned int mux = 0, val = 0, mask = 0;
+
+ if (!strcmp(w->name, SMA1307_AIF_OUT0_NAME)) {
+ mux = sma1307->dapm_aif_out0;
+ val = mux;
+ mask = SMA1307_SDO_OUT0_SEL_MASK;
+ } else if (!strcmp(w->name, SMA1307_AIF_OUT1_NAME)) {
+ mux = sma1307->dapm_aif_out1;
+ val = mux << 3;
+ mask = SMA1307_SDO_OUT1_SEL_MASK;
+ } else {
+ dev_err(sma1307->dev, "%s: Invalid widget - %s\n",
+ __func__, w->name);
+ return -EINVAL;
+ }
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ regmap_update_bits(sma1307->regmap, SMA1307_09_OUTPUT_CTRL,
+ mask, val);
+ break;
+ }
+ return 0;
+}
+
+static int sma1307_sdo_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_09_OUTPUT_CTRL,
+ SMA1307_PORT_CONFIG_MASK,
+ SMA1307_OUTPUT_PORT_ENABLE);
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A3_TOP_MAN2,
+ SMA1307_SDO_OUTPUT_MASK,
+ SMA1307_LOGIC_OUTPUT);
+ break;
+ case SND_SOC_DAPM_POST_PMD:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_09_OUTPUT_CTRL,
+ SMA1307_PORT_CONFIG_MASK,
+ SMA1307_INPUT_PORT_ONLY);
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A3_TOP_MAN2,
+ SMA1307_SDO_OUTPUT_MASK,
+ SMA1307_HIGH_Z_OUTPUT);
+ break;
+ }
+ return 0;
+}
+
+static int sma1307_power_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ sma1307_startup(component);
+ break;
+ case SND_SOC_DAPM_PRE_PMD:
+ sma1307_shutdown(component);
+ break;
+ }
+ return 0;
+}
+
+static int sma1307_dapm_aif_in_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_dapm_context *dapm =
+ snd_soc_dapm_kcontrol_dapm(kcontrol);
+ struct sma1307_priv *sma1307 =
+ snd_soc_component_get_drvdata(dapm->component);
+
+ ucontrol->value.enumerated.item[0] = (unsigned int)sma1307->dapm_aif_in;
+ snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
+
+ return 0;
+}
+
+static int sma1307_dapm_aif_in_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_dapm_context *dapm =
+ snd_soc_dapm_kcontrol_dapm(kcontrol);
+ struct sma1307_priv *sma1307 =
+ snd_soc_component_get_drvdata(dapm->component);
+ int val = (int)ucontrol->value.enumerated.item[0];
+ bool change;
+
+ if ((val < 0) || (val >= ARRAY_SIZE(sma1307_aif_in_source_text))) {
+ dev_err(sma1307->dev, "%s: Out of range\n", __func__);
+ return -EINVAL;
+ }
+
+ if (sma1307->dapm_aif_in != val) {
+ change = true;
+ sma1307->dapm_aif_in = val;
+ } else
+ change = false;
+
+ snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
+
+ return change;
+}
+
+static int sma1307_dapm_sdo_setting_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_dapm_context *dapm =
+ snd_soc_dapm_kcontrol_dapm(kcontrol);
+ struct sma1307_priv *sma1307 =
+ snd_soc_component_get_drvdata(dapm->component);
+
+ ucontrol->value.enumerated.item[0] =
+ (unsigned int)sma1307->dapm_sdo_setting;
+ snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
+
+ return 0;
+}
+
+static int sma1307_dapm_sdo_setting_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_dapm_context *dapm =
+ snd_soc_dapm_kcontrol_dapm(kcontrol);
+ struct sma1307_priv *sma1307 =
+ snd_soc_component_get_drvdata(dapm->component);
+ int val = (int)ucontrol->value.enumerated.item[0];
+ bool change;
+
+ if ((val < 0) || (val >= ARRAY_SIZE(sma1307_sdo_setting_text))) {
+ dev_err(sma1307->dev, "%s: Out of range\n", __func__);
+ return -EINVAL;
+ }
+
+ if (sma1307->dapm_sdo_setting != val) {
+ change = true;
+ sma1307->dapm_sdo_setting = val;
+ } else
+ change = false;
+
+ snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
+
+ return change;
+}
+
+static int sma1307_dapm_aif_out_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_dapm_context *dapm =
+ snd_soc_dapm_kcontrol_dapm(kcontrol);
+ struct sma1307_priv *sma1307 =
+ snd_soc_component_get_drvdata(dapm->component);
+ unsigned int val = 0;
+
+ if (!strcmp(kcontrol->id.name, SMA1307_AIF_OUT0_NAME)) {
+ val = (unsigned int)sma1307->dapm_aif_out0;
+ } else if (!strcmp(kcontrol->id.name, SMA1307_AIF_OUT1_NAME)) {
+ val = (unsigned int)sma1307->dapm_aif_out1;
+ } else {
+ dev_err(sma1307->dev, "%s: Invalid Control ID - %s\n",
+ __func__, kcontrol->id.name);
+ return -EINVAL;
+ }
+ ucontrol->value.enumerated.item[0] = val;
+ snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
+
+ return 0;
+}
+
+static int sma1307_dapm_aif_out_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_dapm_context *dapm =
+ snd_soc_dapm_kcontrol_dapm(kcontrol);
+ struct sma1307_priv *sma1307 =
+ snd_soc_component_get_drvdata(dapm->component);
+ int val = (int)ucontrol->value.enumerated.item[0];
+ bool change;
+
+ if ((val < 0) || (val >= ARRAY_SIZE(sma1307_aif_out_source_text))) {
+ dev_err(sma1307->dev, "%s: Out of range\n", __func__);
+ return -EINVAL;
+ }
+
+ if (!strcmp(kcontrol->id.name, SMA1307_AIF_OUT0_NAME)) {
+ if (sma1307->dapm_aif_out0 != val) {
+ change = true;
+ sma1307->dapm_aif_out0 = val;
+ } else
+ change = false;
+ } else if (!strcmp(kcontrol->id.name, SMA1307_AIF_OUT1_NAME)) {
+ if (sma1307->dapm_aif_out1 != val) {
+ change = true;
+ sma1307->dapm_aif_out1 = val;
+ } else
+ change = false;
+ } else {
+ dev_err(sma1307->dev, "%s: Invalid Control ID - %s\n",
+ __func__, kcontrol->id.name);
+ return -EINVAL;
+ }
+
+ snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
+
+ return change;
+}
+
+static int sma1307_dapm_sdo_enable_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_dapm_context *dapm =
+ snd_soc_dapm_kcontrol_dapm(kcontrol);
+ struct sma1307_priv *sma1307 =
+ snd_soc_component_get_drvdata(dapm->component);
+
+ ucontrol->value.integer.value[0] = (long)sma1307->dapm_sdo_en;
+ snd_soc_dapm_put_volsw(kcontrol, ucontrol);
+
+ return 0;
+}
+
+static int sma1307_dapm_sdo_enable_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_dapm_context *dapm =
+ snd_soc_dapm_kcontrol_dapm(kcontrol);
+ struct sma1307_priv *sma1307 =
+ snd_soc_component_get_drvdata(dapm->component);
+ int val = (int)ucontrol->value.integer.value[0];
+ bool change;
+
+ if ((val < 0) || (val > 1)) {
+ dev_err(sma1307->dev, "%s: Out of range\n", __func__);
+ return -EINVAL;
+ }
+
+ if (sma1307->dapm_sdo_en != val) {
+ change = true;
+ sma1307->dapm_sdo_en = val;
+ } else
+ change = false;
+
+ snd_soc_dapm_put_volsw(kcontrol, ucontrol);
+
+ return change;
+}
+
+static const struct snd_kcontrol_new sma1307_aif_in_source_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = SMA1307_AIF_IN_NAME,
+ .info = snd_soc_info_enum_double,
+ .get = sma1307_dapm_aif_in_get,
+ .put = sma1307_dapm_aif_in_put,
+ .private_value = (unsigned long)&sma1307_aif_in_source_enum
+};
+
+static const struct snd_kcontrol_new sma1307_sdo_setting_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "SDO Setting",
+ .info = snd_soc_info_enum_double,
+ .get = sma1307_dapm_sdo_setting_get,
+ .put = sma1307_dapm_sdo_setting_put,
+ .private_value = (unsigned long)&sma1307_sdo_setting_enum
+};
+
+static const struct snd_kcontrol_new sma1307_aif_out0_source_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = SMA1307_AIF_OUT0_NAME,
+ .info = snd_soc_info_enum_double,
+ .get = sma1307_dapm_aif_out_get,
+ .put = sma1307_dapm_aif_out_put,
+ .private_value = (unsigned long)&sma1307_aif_out_source_enum
+};
+
+static const struct snd_kcontrol_new sma1307_aif_out1_source_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = SMA1307_AIF_OUT1_NAME,
+ .info = snd_soc_info_enum_double,
+ .get = sma1307_dapm_aif_out_get,
+ .put = sma1307_dapm_aif_out_put,
+ .private_value = (unsigned long)&sma1307_aif_out_source_enum
+};
+
+static const struct snd_kcontrol_new sma1307_sdo_control = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Switch",
+ .info = snd_soc_info_volsw,
+ .get = sma1307_dapm_sdo_enable_get,
+ .put = sma1307_dapm_sdo_enable_put,
+ .private_value = SOC_SINGLE_VALUE(SND_SOC_NOPM, 0, 1, 0, 0)
+};
+
+static const struct snd_kcontrol_new sma1307_enable_control =
+ SOC_DAPM_SINGLE("Switch", SMA1307_00_SYSTEM_CTRL, 0, 1, 0);
+
+static const struct snd_kcontrol_new sma1307_binary_mode_control[] = {
+ SOC_ENUM_EXT("Binary Mode", sma1307_binary_mode_enum,
+ snd_soc_get_enum_double, sma1307_binary_mode_put),
+};
+
+static const struct snd_kcontrol_new sma1307_snd_controls[] = {
+ SOC_SINGLE_TLV(SMA1307_VOL_CTRL_NAME, SMA1307_0A_SPK_VOL,
+ 0, 167, 1, sma1307_spk_tlv),
+ SOC_ENUM_EXT(SMA1307_TDM_RX0_POS_NAME, sma1307_tdm_slot_enum,
+ sma1307_tdm_slot_get, sma1307_tdm_slot_put),
+ SOC_ENUM_EXT(SMA1307_TDM_RX1_POS_NAME, sma1307_tdm_slot_enum,
+ sma1307_tdm_slot_get, sma1307_tdm_slot_put),
+ SOC_ENUM_EXT(SMA1307_TDM_TX0_POS_NAME, sma1307_tdm_slot_enum,
+ sma1307_tdm_slot_get, sma1307_tdm_slot_put),
+ SOC_ENUM_EXT(SMA1307_TDM_TX1_POS_NAME, sma1307_tdm_slot_enum,
+ sma1307_tdm_slot_get, sma1307_tdm_slot_put),
+ SOC_ENUM_EXT(SMA1307_RESET_CTRL_NAME, sma1307_reset_enum,
+ snd_soc_get_enum_double, sma1307_reset_put),
+ SOC_SINGLE_BOOL_EXT(SMA1307_FORCE_MUTE_CTRL_NAME, 0,
+ sma1307_force_mute_get, sma1307_force_mute_put),
+ SOC_SINGLE_BOOL_EXT(SMA1307_OT1_SW_PROT_CTRL_NAME, 0,
+ sma1307_sw_ot1_prot_get, sma1307_sw_ot1_prot_put),
+ SOC_SINGLE_BOOL_EXT(SMA1307_CHECK_FAULT_STATUS_NAME, 0,
+ sma1307_check_fault_status_get,
+ sma1307_check_fault_status_put),
+ SOC_SINGLE_EXT(SMA1307_CHECK_FAULT_PERIOD_NAME, SND_SOC_NOPM, 0, 600, 0,
+ sma1307_check_fault_period_get,
+ sma1307_check_fault_period_put),
+};
+
+static const struct snd_soc_dapm_widget sma1307_dapm_widgets[] = {
+ /* platform domain */
+ SND_SOC_DAPM_OUTPUT("SPK"),
+ SND_SOC_DAPM_INPUT("SDO"),
+
+ /* path domain */
+ SND_SOC_DAPM_MUX_E(SMA1307_AIF_IN_NAME, SND_SOC_NOPM, 0, 0,
+ &sma1307_aif_in_source_control,
+ sma1307_aif_in_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU),
+ SND_SOC_DAPM_MUX_E("SDO Setting", SND_SOC_NOPM, 0, 0,
+ &sma1307_sdo_setting_control,
+ sma1307_sdo_setting_event,
+ SND_SOC_DAPM_PRE_PMU),
+ SND_SOC_DAPM_MUX_E(SMA1307_AIF_OUT0_NAME, SND_SOC_NOPM, 0, 0,
+ &sma1307_aif_out0_source_control,
+ sma1307_aif_out_event,
+ SND_SOC_DAPM_PRE_PMU),
+ SND_SOC_DAPM_MUX_E(SMA1307_AIF_OUT1_NAME, SND_SOC_NOPM, 0, 0,
+ &sma1307_aif_out1_source_control,
+ sma1307_aif_out_event,
+ SND_SOC_DAPM_PRE_PMU),
+ SND_SOC_DAPM_SWITCH_E("SDO Enable", SND_SOC_NOPM, 0, 0,
+ &sma1307_sdo_control,
+ sma1307_sdo_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_MIXER("Entry", SND_SOC_NOPM, 0, 0, NULL, 0),
+ SND_SOC_DAPM_OUT_DRV_E("AMP Power", SND_SOC_NOPM, 0, 0, NULL, 0,
+ sma1307_power_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD |
+ SND_SOC_DAPM_POST_PMU),
+ SND_SOC_DAPM_SWITCH("AMP Enable", SND_SOC_NOPM, 0, 0,
+ &sma1307_enable_control),
+
+ /* stream domain */
+ SND_SOC_DAPM_AIF_IN("AIF IN", "Playback", 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("AIF OUT", "Capture", 0, SND_SOC_NOPM, 0, 0),
+};
+
+static const struct snd_soc_dapm_route sma1307_audio_map[] = {
+ /* Playback */
+ { "AIF IN Source", "Mono", "AIF IN" },
+ { "AIF IN Source", "Left", "AIF IN" },
+ { "AIF IN Source", "Right", "AIF IN" },
+
+ { "SDO Enable", "Switch", "AIF IN" },
+
+ { "SDO Setting", "Data_One_48k", "SDO Enable" },
+ { "SDO Setting", "Data_Two_48k", "SDO Enable" },
+ { "SDO Setting", "Data_Two_24k", "SDO Enable" },
+ { "SDO Setting", "Clk_PLL", "SDO Enable" },
+ { "SDO Setting", "Clk_OSC", "SDO Enable" },
+
+ { "AIF OUT0 Source", "Disable", "SDO Setting" },
+ { "AIF OUT0 Source", "After_FmtC", "SDO Setting" },
+ { "AIF OUT0 Source", "After_Mixer", "SDO Setting" },
+ { "AIF OUT0 Source", "After_DSP", "SDO Setting" },
+ { "AIF OUT0 Source", "Vrms2_Avg", "SDO Setting" },
+ { "AIF OUT0 Source", "Battery", "SDO Setting" },
+ { "AIF OUT0 Source", "Temperature", "SDO Setting" },
+ { "AIF OUT0 Source", "After_Delay", "SDO Setting" },
+
+ { "AIF OUT1 Source", "Disable", "SDO Setting" },
+ { "AIF OUT1 Source", "After_FmtC", "SDO Setting" },
+ { "AIF OUT1 Source", "After_Mixer", "SDO Setting" },
+ { "AIF OUT1 Source", "After_DSP", "SDO Setting" },
+ { "AIF OUT1 Source", "Vrms2_Avg", "SDO Setting" },
+ { "AIF OUT1 Source", "Battery", "SDO Setting" },
+ { "AIF OUT1 Source", "Temperature", "SDO Setting" },
+ { "AIF OUT1 Source", "After_Delay", "SDO Setting" },
+
+ { "Entry", NULL, "AIF OUT0 Source" },
+ { "Entry", NULL, "AIF OUT1 Source" },
+ { "Entry", NULL, "AIF IN Source" },
+
+ { "AMP Power", NULL, "Entry" },
+
+ { "AMP Enable", "Switch", "AMP Power" },
+ { "SPK", NULL, "AMP Enable" },
+
+ /* Capture */
+ { "AIF OUT", NULL, "AMP Enable" },
+};
+
+static void sma1307_setup_pll(struct snd_soc_component *component,
+ unsigned int bclk)
+{
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+
+ int i = 0;
+
+ dev_dbg(component->dev, "%s: BCLK = %dHz\n", __func__, bclk);
+
+ if (sma1307->sys_clk_id == SMA1307_PLL_CLKIN_MCLK) {
+ dev_warn(component->dev, "%s: MCLK is not supported\n",
+ __func__);
+ } else if (sma1307->sys_clk_id == SMA1307_PLL_CLKIN_BCLK) {
+ for (i = 0; i < sma1307->num_of_pll_matches; i++) {
+ if (sma1307->pll_matches[i].input_clk == bclk)
+ break;
+ }
+ if (i == sma1307->num_of_pll_matches) {
+ dev_warn(component->dev,
+ "%s: No matching value between pll table and SCK\n",
+ __func__);
+ return;
+ }
+
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A2_TOP_MAN1,
+ SMA1307_PLL_MASK, SMA1307_PLL_ON);
+ }
+
+ regmap_write(sma1307->regmap, SMA1307_8B_PLL_POST_N,
+ sma1307->pll_matches[i].post_n);
+ regmap_write(sma1307->regmap, SMA1307_8C_PLL_N,
+ sma1307->pll_matches[i].n);
+ regmap_write(sma1307->regmap, SMA1307_8D_PLL_A_SETTING,
+ sma1307->pll_matches[i].vco);
+ regmap_write(sma1307->regmap, SMA1307_8E_PLL_P_CP,
+ sma1307->pll_matches[i].p_cp);
+}
+
+static int sma1307_dai_hw_params_amp(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *component = dai->component;
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+ unsigned int bclk = 0;
+ int ret = 0;
+
+ if (sma1307->format == SND_SOC_DAIFMT_DSP_A)
+ bclk = params_rate(params) * sma1307->frame_size;
+ else
+ bclk = params_rate(params) * params_physical_width(params)
+ * params_channels(params);
+
+ dev_dbg(component->dev,
+ "%s: rate = %d : bit size = %d : channel = %d\n",
+ __func__, params_rate(params), params_width(params),
+ params_channels(params));
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ if (sma1307->sys_clk_id == SMA1307_PLL_CLKIN_BCLK) {
+ if (sma1307->last_bclk != bclk) {
+ sma1307_setup_pll(component, bclk);
+ sma1307->last_bclk = bclk;
+ }
+ }
+
+ switch (params_rate(params)) {
+ case 8000:
+ case 12000:
+ case 16000:
+ case 24000:
+ case 32000:
+ case 44100:
+ case 48000:
+ break;
+
+ case 96000:
+ dev_warn(component->dev,
+ "%s: %d rate not support SDO\n", __func__,
+ params_rate(params));
+ break;
+
+ default:
+ dev_err(component->dev, "%s: not support rate : %d\n",
+ __func__, params_rate(params));
+
+ return -EINVAL;
+ }
+
+ /* substream->stream is SNDRV_PCM_STREAM_CAPTURE */
+ } else {
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A4_TOP_MAN3,
+ SMA1307_SCK_RATE_MASK
+ |
+ SMA1307_DATA_WIDTH_MASK,
+ SMA1307_SCK_32FS |
+ SMA1307_DATA_16BIT);
+ break;
+
+ case SNDRV_PCM_FORMAT_S24_LE:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A4_TOP_MAN3,
+ SMA1307_SCK_RATE_MASK
+ |
+ SMA1307_DATA_WIDTH_MASK,
+ SMA1307_SCK_64FS |
+ SMA1307_DATA_24BIT);
+ break;
+
+ case SNDRV_PCM_FORMAT_S32_LE:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A4_TOP_MAN3,
+ SMA1307_SCK_RATE_MASK
+ |
+ SMA1307_DATA_WIDTH_MASK,
+ SMA1307_SCK_64FS |
+ SMA1307_DATA_24BIT);
+ break;
+ default:
+ dev_err(component->dev,
+ "%s: not support data bit : %d\n", __func__,
+ params_format(params));
+ return -EINVAL;
+ }
+ }
+
+ switch (sma1307->format) {
+ case SND_SOC_DAIFMT_I2S:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_01_INPUT_CTRL1,
+ SMA1307_I2S_MODE_MASK,
+ SMA1307_STANDARD_I2S);
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A4_TOP_MAN3,
+ SMA1307_INTERFACE_MASK,
+ SMA1307_I2S_FORMAT);
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_01_INPUT_CTRL1,
+ SMA1307_I2S_MODE_MASK, SMA1307_LJ);
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A4_TOP_MAN3,
+ SMA1307_INTERFACE_MASK,
+ SMA1307_LJ_FORMAT);
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ switch (params_width(params)) {
+ case 16:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_01_INPUT_CTRL1,
+ SMA1307_I2S_MODE_MASK,
+ SMA1307_RJ_16BIT);
+ break;
+ case 24:
+ case 32:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_01_INPUT_CTRL1,
+ SMA1307_I2S_MODE_MASK,
+ SMA1307_RJ_24BIT);
+ break;
+ }
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_01_INPUT_CTRL1,
+ SMA1307_I2S_MODE_MASK,
+ SMA1307_STANDARD_I2S);
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A4_TOP_MAN3,
+ SMA1307_INTERFACE_MASK,
+ SMA1307_TDM_FORMAT);
+ break;
+ }
+
+ switch (params_width(params)) {
+ case 16:
+ case 24:
+ case 32:
+ break;
+ default:
+ dev_err(component->dev,
+ "%s: not support data bit : %d\n", __func__,
+ params_format(params));
+ return -EINVAL;
+ }
+ if (ret < 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int sma1307_dai_set_sysclk_amp(struct snd_soc_dai *dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_component *component = dai->component;
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+
+ switch (clk_id) {
+ case SMA1307_EXTERNAL_CLOCK_19_2:
+ case SMA1307_EXTERNAL_CLOCK_24_576:
+ case SMA1307_PLL_CLKIN_MCLK:
+ case SMA1307_PLL_CLKIN_BCLK:
+ break;
+ default:
+ dev_err(component->dev, "%s: Invalid clk id: %d\n",
+ __func__, clk_id);
+ return -EINVAL;
+ }
+ sma1307->sys_clk_id = clk_id;
+
+ return 0;
+}
+
+static int sma1307_dai_set_fmt_amp(struct snd_soc_dai *dai, unsigned int fmt)
+{
+ struct snd_soc_component *component = dai->component;
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+
+ case SND_SOC_DAIFMT_CBC_CFC:
+ dev_dbg(component->dev,
+ "%s: %s\n", __func__, "I2S/TDM Device mode");
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_01_INPUT_CTRL1,
+ SMA1307_CONTROLLER_DEVICE_MASK,
+ SMA1307_DEVICE_MODE);
+ break;
+
+ case SND_SOC_DAIFMT_CBP_CFP:
+ dev_dbg(component->dev,
+ "%s: %s\n", __func__, "I2S/TDM Controller mode");
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_01_INPUT_CTRL1,
+ SMA1307_CONTROLLER_DEVICE_MASK,
+ SMA1307_CONTROLLER_MODE);
+ break;
+
+ default:
+ dev_err(component->dev,
+ "%s: Unsupported Controller/Device : 0x%x\n",
+ __func__, fmt);
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ case SND_SOC_DAIFMT_RIGHT_J:
+ case SND_SOC_DAIFMT_LEFT_J:
+ case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
+ sma1307->format = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
+ break;
+ default:
+ dev_err(component->dev,
+ "%s: Unsupported Audio Interface Format : 0x%x\n",
+ __func__, fmt);
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+
+ case SND_SOC_DAIFMT_IB_NF:
+ dev_dbg(component->dev, "%s: %s\n",
+ __func__, "Invert BCLK + Normal Frame");
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_01_INPUT_CTRL1,
+ SMA1307_SCK_RISING_MASK,
+ SMA1307_SCK_RISING_EDGE);
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ dev_dbg(component->dev, "%s: %s\n",
+ __func__, "Invert BCLK + Invert Frame");
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_01_INPUT_CTRL1,
+ SMA1307_LEFTPOL_MASK
+ | SMA1307_SCK_RISING_MASK,
+ SMA1307_HIGH_FIRST_CH
+ | SMA1307_SCK_RISING_EDGE);
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ dev_dbg(component->dev, "%s: %s\n",
+ __func__, "Normal BCLK + Invert Frame");
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_01_INPUT_CTRL1,
+ SMA1307_LEFTPOL_MASK,
+ SMA1307_HIGH_FIRST_CH);
+ break;
+ case SND_SOC_DAIFMT_NB_NF:
+ dev_dbg(component->dev, "%s: %s\n",
+ __func__, "Normal BCLK + Normal Frame");
+ break;
+ default:
+ dev_err(component->dev,
+ "%s: Unsupported Bit & Frameclock : 0x%x\n",
+ __func__, fmt);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sma1307_dai_set_tdm_slot(struct snd_soc_dai *dai,
+ unsigned int tx_mask, unsigned int rx_mask,
+ int slots, int slot_width)
+{
+ struct snd_soc_component *component = dai->component;
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+
+ dev_dbg(component->dev, "%s: slots = %d, slot_width - %d\n",
+ __func__, slots, slot_width);
+
+ sma1307->frame_size = slot_width * slots;
+
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A4_TOP_MAN3,
+ SMA1307_INTERFACE_MASK, SMA1307_TDM_FORMAT);
+
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A5_TDM1,
+ SMA1307_TDM_TX_MODE_MASK,
+ SMA1307_TDM_TX_MONO);
+
+ switch (slot_width) {
+ case 16:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A6_TDM2,
+ SMA1307_TDM_DL_MASK,
+ SMA1307_TDM_DL_16);
+ break;
+ case 32:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A6_TDM2,
+ SMA1307_TDM_DL_MASK,
+ SMA1307_TDM_DL_32);
+ break;
+ default:
+ dev_err(component->dev, "%s: not support TDM %d slot_width\n",
+ __func__, slot_width);
+ return -EINVAL;
+ }
+
+ switch (slots) {
+ case 4:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A6_TDM2,
+ SMA1307_TDM_N_SLOT_MASK,
+ SMA1307_TDM_N_SLOT_4);
+ break;
+ case 8:
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A6_TDM2,
+ SMA1307_TDM_N_SLOT_MASK,
+ SMA1307_TDM_N_SLOT_8);
+ break;
+ default:
+ dev_err(component->dev, "%s: not support TDM %d slots\n",
+ __func__, slots);
+ return -EINVAL;
+ }
+
+ if (sma1307->tdm_slot0_rx < slots)
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A5_TDM1,
+ SMA1307_TDM_SLOT0_RX_POS_MASK,
+ sma1307->tdm_slot0_rx << 3);
+ else
+ dev_err(component->dev, "%s: Incorrect tdm-slot0-rx %d set\n",
+ __func__, sma1307->tdm_slot0_rx);
+
+ if (sma1307->tdm_slot1_rx < slots)
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A5_TDM1,
+ SMA1307_TDM_SLOT1_RX_POS_MASK,
+ sma1307->tdm_slot1_rx);
+ else
+ dev_err(component->dev, "%s: Incorrect tdm-slot1-rx %d set\n",
+ __func__, sma1307->tdm_slot1_rx);
+
+ if (sma1307->tdm_slot0_tx < slots)
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A6_TDM2,
+ SMA1307_TDM_SLOT0_TX_POS_MASK,
+ sma1307->tdm_slot0_tx << 3);
+ else
+ dev_err(component->dev, "%s: Incorrect tdm-slot0-tx %d set\n",
+ __func__, sma1307->tdm_slot0_tx);
+
+ if (sma1307->tdm_slot1_tx < slots)
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_A6_TDM2,
+ SMA1307_TDM_SLOT1_TX_POS_MASK,
+ sma1307->tdm_slot1_tx);
+ else
+ dev_err(component->dev, "%s: Incorrect tdm-slot1-tx %d set\n",
+ __func__, sma1307->tdm_slot1_tx);
+
+ return 0;
+}
+
+static int sma1307_dai_mute_stream(struct snd_soc_dai *dai, int mute,
+ int stream)
+{
+ struct snd_soc_component *component = dai->component;
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+
+ if (stream == SNDRV_PCM_STREAM_CAPTURE)
+ return 0;
+ if (mute) {
+ dev_dbg(component->dev, "%s: %s\n", __func__, "MUTE");
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_0E_MUTE_VOL_CTRL,
+ SMA1307_SPK_MUTE_MASK,
+ SMA1307_SPK_MUTE);
+ } else {
+ if (!sma1307->force_mute_status) {
+ dev_dbg(component->dev, "%s: %s\n", __func__,
+ "UNMUTE");
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_0E_MUTE_VOL_CTRL,
+ SMA1307_SPK_MUTE_MASK,
+ SMA1307_SPK_UNMUTE);
+ } else {
+ dev_dbg(sma1307->dev, "%s: FORCE MUTE!!!\n", __func__);
+ }
+ }
+
+ return 0;
+}
+
+static const struct snd_soc_dai_ops sma1307_dai_ops_amp = {
+ .hw_params = sma1307_dai_hw_params_amp,
+ .set_fmt = sma1307_dai_set_fmt_amp,
+ .set_sysclk = sma1307_dai_set_sysclk_amp,
+ .set_tdm_slot = sma1307_dai_set_tdm_slot,
+ .mute_stream = sma1307_dai_mute_stream,
+};
+
+#define SMA1307_RATES_PLAYBACK SNDRV_PCM_RATE_8000_96000
+#define SMA1307_RATES_CAPTURE SNDRV_PCM_RATE_8000_48000
+#define SMA1307_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | \
+ SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_driver sma1307_dai[] = {
+ {
+ .name = "sma1307-amplifier",
+ .id = 0,
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SMA1307_RATES_PLAYBACK,
+ .formats = SMA1307_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SMA1307_RATES_CAPTURE,
+ .formats = SMA1307_FORMATS,
+ },
+ .ops = &sma1307_dai_ops_amp,
+ },
+};
+
+static void sma1307_check_fault_worker(struct work_struct *work)
+{
+ struct sma1307_priv *sma1307 =
+ container_of(work, struct sma1307_priv, check_fault_work.work);
+ unsigned int status1_val, status2_val;
+ char *envp[3] = { NULL, NULL, NULL };
+
+ if (sma1307->tsdw_cnt)
+ regmap_read(sma1307->regmap,
+ SMA1307_0A_SPK_VOL, &sma1307->cur_vol);
+ else
+ regmap_read(sma1307->regmap,
+ SMA1307_0A_SPK_VOL, &sma1307->init_vol);
+
+ regmap_read(sma1307->regmap, SMA1307_FA_STATUS1, &status1_val);
+ regmap_read(sma1307->regmap, SMA1307_FB_STATUS2, &status2_val);
+
+ if (~status1_val & SMA1307_OT1_OK_STATUS) {
+ dev_crit(sma1307->dev,
+ "%s: OT1(Over Temperature Level 1)\n", __func__);
+ envp[0] = kasprintf(GFP_KERNEL, "STATUS=OT1");
+ if (sma1307->sw_ot1_prot) {
+ /* Volume control (Current Volume -3dB) */
+ if ((sma1307->cur_vol + 6) <= 0xFA) {
+ sma1307->cur_vol += 6;
+ regmap_write(sma1307->regmap,
+ SMA1307_0A_SPK_VOL,
+ sma1307->cur_vol);
+ envp[1] = kasprintf(GFP_KERNEL,
+ "VOLUME=0x%02X", sma1307->cur_vol);
+ }
+ }
+ sma1307->tsdw_cnt++;
+ } else if (sma1307->tsdw_cnt) {
+ regmap_write(sma1307->regmap,
+ SMA1307_0A_SPK_VOL, sma1307->init_vol);
+ sma1307->tsdw_cnt = 0;
+ sma1307->cur_vol = sma1307->init_vol;
+ envp[0] = kasprintf(GFP_KERNEL, "STATUS=OT1_CLEAR");
+ envp[1] = kasprintf(GFP_KERNEL,
+ "VOLUME=0x%02X", sma1307->cur_vol);
+ }
+
+ if (~status1_val & SMA1307_OT2_OK_STATUS) {
+ dev_crit(sma1307->dev,
+ "%s: OT2(Over Temperature Level 2)\n", __func__);
+ envp[0] = kasprintf(GFP_KERNEL, "STATUS=OT2");
+ }
+ if (status1_val & SMA1307_UVLO_STATUS) {
+ dev_crit(sma1307->dev,
+ "%s: UVLO(Under Voltage Lock Out)\n", __func__);
+ envp[0] = kasprintf(GFP_KERNEL, "STATUS=UVLO");
+ }
+ if (status1_val & SMA1307_OVP_BST_STATUS) {
+ dev_crit(sma1307->dev,
+ "%s: OVP_BST(Over Voltage Protection)\n", __func__);
+ envp[0] = kasprintf(GFP_KERNEL, "STATUS=OVP_BST");
+ }
+ if (status2_val & SMA1307_OCP_SPK_STATUS) {
+ dev_crit(sma1307->dev,
+ "%s: OCP_SPK(Over Current Protect SPK)\n", __func__);
+ envp[0] = kasprintf(GFP_KERNEL, "STATUS=OCP_SPK");
+ }
+ if (status2_val & SMA1307_OCP_BST_STATUS) {
+ dev_crit(sma1307->dev,
+ "%s: OCP_BST(Over Current Protect Boost)\n", __func__);
+ envp[0] = kasprintf(GFP_KERNEL, "STATUS=OCP_BST");
+ }
+ if (status2_val & SMA1307_CLK_MON_STATUS) {
+ dev_crit(sma1307->dev,
+ "%s: CLK_FAULT(No clock input)\n", __func__);
+ envp[0] = kasprintf(GFP_KERNEL, "STATUS=CLK_FAULT");
+ }
+
+ if (envp[0] != NULL) {
+ if (kobject_uevent_env(sma1307->kobj, KOBJ_CHANGE, envp))
+ dev_err(sma1307->dev,
+ "%s: Error sending uevent\n", __func__);
+ kfree(envp[0]);
+ kfree(envp[1]);
+ }
+
+ if (sma1307->check_fault_status) {
+ if (sma1307->check_fault_period > 0)
+ queue_delayed_work(system_freezable_wq,
+ &sma1307->check_fault_work,
+ sma1307->check_fault_period * HZ);
+ else
+ queue_delayed_work(system_freezable_wq,
+ &sma1307->check_fault_work,
+ CHECK_PERIOD_TIME * HZ);
+ }
+}
+
+static void sma1307_setting_loaded(struct sma1307_priv *sma1307, const char *file)
+{
+ const struct firmware *fw;
+ int *data, size, offset, num_mode;
+
+ request_firmware(&fw, file, sma1307->dev);
+
+ if (!fw) {
+ dev_err(sma1307->dev, "%s: failed to read \"%s\"\n",
+ __func__, setting_file);
+ release_firmware(fw);
+ sma1307->set.status = false;
+ return;
+ } else if ((fw->size) < SMA1307_SETTING_HEADER_SIZE) {
+ dev_err(sma1307->dev, "%s: Invalid file\n", __func__);
+ release_firmware(fw);
+ sma1307->set.status = false;
+ return;
+ }
+
+ data = kzalloc(fw->size, GFP_KERNEL);
+ size = fw->size >> 2;
+ memcpy(data, fw->data, fw->size);
+
+ release_firmware(fw);
+
+ /* HEADER */
+ sma1307->set.header_size = SMA1307_SETTING_HEADER_SIZE;
+ sma1307->set.checksum = data[sma1307->set.header_size - 2];
+ sma1307->set.num_mode = data[sma1307->set.header_size - 1];
+ num_mode = sma1307->set.num_mode;
+ sma1307->set.header = devm_kzalloc(sma1307->dev,
+ sma1307->set.header_size,
+ GFP_KERNEL);
+ memcpy(sma1307->set.header, data,
+ sma1307->set.header_size * sizeof(int));
+
+ if ((sma1307->set.checksum >> 8) != SMA1307_SETTING_CHECKSUM) {
+ dev_err(sma1307->dev, "%s: failed by dismatch \"%s\"\n",
+ __func__, setting_file);
+ sma1307->set.status = false;
+ return;
+ }
+
+ /* DEFAULT */
+ sma1307->set.def_size = SMA1307_SETTING_DEFAULT_SIZE;
+ sma1307->set.def
+ = devm_kzalloc(sma1307->dev,
+ sma1307->set.def_size * sizeof(int), GFP_KERNEL);
+ memcpy(sma1307->set.def,
+ &data[sma1307->set.header_size],
+ sma1307->set.def_size * sizeof(int));
+
+ /* MODE */
+ offset = sma1307->set.header_size + sma1307->set.def_size;
+ sma1307->set.mode_size = DIV_ROUND_CLOSEST(size - offset, num_mode + 1);
+ for (int i = 0; i < num_mode; i++) {
+ sma1307->set.mode_set[i]
+ = devm_kzalloc(sma1307->dev,
+ sma1307->set.mode_size * 2 * sizeof(int),
+ GFP_KERNEL);
+ for (int j = 0; j < sma1307->set.mode_size; j++) {
+ sma1307->set.mode_set[i][2 * j]
+ = data[offset + ((num_mode + 1) * j)];
+ sma1307->set.mode_set[i][2 * j + 1]
+ = data[offset + ((num_mode + 1) * j + i + 1)];
+ }
+ }
+
+ kfree(data);
+ sma1307->set.status = true;
+
+}
+
+static void sma1307_reset(struct snd_soc_component *component)
+{
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+ unsigned int status = 0;
+
+ regmap_read(sma1307->regmap, SMA1307_FF_DEVICE_INDEX, &status);
+
+ sma1307->rev_num = status & SMA1307_REV_NUM_STATUS;
+ dev_dbg(component->dev, "%s: SMA1307 Revision %d\n",
+ __func__, sma1307->rev_num);
+ regmap_read(sma1307->regmap, SMA1307_99_OTP_TRM2, &sma1307->otp_trm2);
+ regmap_read(sma1307->regmap, SMA1307_9A_OTP_TRM3, &sma1307->otp_trm3);
+
+ if ((sma1307->otp_trm2 & SMA1307_OTP_STAT_MASK) != SMA1307_OTP_STAT_1)
+ dev_warn(component->dev, "%s: SMA1307 OTP Status Fail\n",
+ __func__);
+
+ /* Register Initial Value Setting */
+ sma1307_setting_loaded(sma1307, setting_file);
+ if (sma1307->set.status)
+ sma1307_set_binary(component);
+ else
+ sma1307_set_default(component);
+
+ regmap_update_bits(sma1307->regmap,
+ SMA1307_93_INT_CTRL,
+ SMA1307_DIS_INT_MASK, SMA1307_HIGH_Z_INT);
+ regmap_write(sma1307->regmap, SMA1307_0A_SPK_VOL, sma1307->init_vol);
+}
+
+static void sma1307_set_binary(struct snd_soc_component *component)
+{
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+ int i = 0, mode = 0;
+
+ for (i = 0; i < (sma1307->set.def_size); i++) {
+ if (sma1307_writeable_register(sma1307->dev, i)
+ && ((i < SMA1307_97_OTP_TRM0)
+ || (i > SMA1307_9A_OTP_TRM3))) {
+ regmap_write(sma1307->regmap, i, sma1307->set.def[i]);
+
+ }
+ }
+ for (i = 0; i < (sma1307->set.mode_size); i++) {
+ if (sma1307_writeable_register(sma1307->dev, i)
+ && ((i < SMA1307_97_OTP_TRM0)
+ || (i > SMA1307_9A_OTP_TRM3))) {
+ mode = sma1307->binary_mode;
+ regmap_write(sma1307->regmap,
+ sma1307->set.mode_set[mode][2 * i],
+ sma1307->set.mode_set[mode][2 * i +
+ 1]);
+ }
+ }
+}
+
+static void sma1307_set_default(struct snd_soc_component *component)
+{
+ struct sma1307_priv *sma1307 = snd_soc_component_get_drvdata(component);
+ int i = 0;
+
+ for (i = 0; i < (unsigned int)ARRAY_SIZE(sma1307_reg_def); i++)
+ regmap_write(sma1307->regmap,
+ sma1307_reg_def[i].reg,
+ sma1307_reg_def[i].def);
+
+ if (!strcmp(sma1307->name, DEVICE_NAME_SMA1307AQ))
+ sma1307->data->init(sma1307->regmap);
+}
+
+static int sma1307_probe(struct snd_soc_component *component)
+{
+ struct snd_soc_dapm_context *dapm =
+ snd_soc_component_get_dapm(component);
+
+ snd_soc_dapm_sync(dapm);
+
+ sma1307_amp_component = component;
+
+ snd_soc_add_component_controls(component, sma1307_binary_mode_control,
+ ARRAY_SIZE(sma1307_binary_mode_control));
+ sma1307_reset(component);
+
+ return 0;
+}
+
+static const struct snd_soc_component_driver sma1307_component = {
+ .probe = sma1307_probe,
+ .controls = sma1307_snd_controls,
+ .num_controls = ARRAY_SIZE(sma1307_snd_controls),
+ .dapm_widgets = sma1307_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(sma1307_dapm_widgets),
+ .dapm_routes = sma1307_audio_map,
+ .num_dapm_routes = ARRAY_SIZE(sma1307_audio_map),
+};
+
+static const struct regmap_config sma_i2c_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = SMA1307_FF_DEVICE_INDEX,
+ .readable_reg = sma1307_readable_register,
+ .writeable_reg = sma1307_writeable_register,
+ .volatile_reg = sma1307_volatile_register,
+
+ .reg_defaults = sma1307_reg_def,
+ .num_reg_defaults = ARRAY_SIZE(sma1307_reg_def),
+};
+
+static void sma1307aq_init(struct regmap *regmap)
+{
+ /* Guidelines for driving 4ohm load */
+ /* Brown Out Protection */
+ regmap_write(regmap, SMA1307_02_BROWN_OUT_PROT1, 0x62);
+ regmap_write(regmap, SMA1307_03_BROWN_OUT_PROT2, 0x5D);
+ regmap_write(regmap, SMA1307_04_BROWN_OUT_PROT3, 0x57);
+ regmap_write(regmap, SMA1307_05_BROWN_OUT_PROT8, 0x54);
+ regmap_write(regmap, SMA1307_06_BROWN_OUT_PROT9, 0x51);
+ regmap_write(regmap,
+ SMA1307_07_BROWN_OUT_PROT10, 0x4D);
+ regmap_write(regmap,
+ SMA1307_08_BROWN_OUT_PROT11, 0x4B);
+ regmap_write(regmap, SMA1307_27_BROWN_OUT_PROT4, 0x3C);
+ regmap_write(regmap, SMA1307_28_BROWN_OUT_PROT5, 0x5B);
+ regmap_write(regmap,
+ SMA1307_29_BROWN_OUT_PROT12, 0x78);
+ regmap_write(regmap,
+ SMA1307_2A_BROWN_OUT_PROT13, 0x96);
+ regmap_write(regmap,
+ SMA1307_2B_BROWN_OUT_PROT14, 0xB4);
+ regmap_write(regmap,
+ SMA1307_2C_BROWN_OUT_PROT15, 0xD3);
+ /* FDPEC Gain */
+ regmap_write(regmap, SMA1307_35_FDPEC_CTRL0, 0x16);
+ /* FLT Vdd */
+ regmap_write(regmap, SMA1307_92_FDPEC_CTRL1, 0xA0);
+ /* Boost Max */
+ regmap_write(regmap, SMA1307_AB_BOOST_CTRL4, 0x0F);
+}
+
+static const struct sma1307_data sma1307aq_data = {
+ .name = DEVICE_NAME_SMA1307AQ,
+ .init = sma1307aq_init,
+};
+
+static int sma1307_i2c_probe(struct i2c_client *client)
+{
+ struct sma1307_priv *sma1307;
+ const struct sma1307_data *data;
+ int ret = 0;
+ unsigned int device_info;
+
+ sma1307 = devm_kzalloc(&client->dev,
+ sizeof(*sma1307), GFP_KERNEL);
+ if (!sma1307)
+ return -ENOMEM;
+
+ sma1307->regmap = devm_regmap_init_i2c(client, &sma_i2c_regmap);
+ if (IS_ERR(sma1307->regmap)) {
+ return dev_err_probe(&client->dev, PTR_ERR(sma1307->regmap),
+ "%s: failed to allocate register map\n", __func__);
+ }
+
+ data = device_get_match_data(&client->dev);
+ if (!data)
+ return -ENODEV;
+
+ sma1307->data = data;
+
+ /* set initial value as normal AMP IC status */
+ sma1307->name = client->name;
+ sma1307->format = SND_SOC_DAIFMT_I2S;
+ sma1307->sys_clk_id = SMA1307_PLL_CLKIN_BCLK;
+ sma1307->num_of_pll_matches = ARRAY_SIZE(sma1307_pll_matches);
+
+ sma1307->check_fault_period = CHECK_PERIOD_TIME;
+ sma1307->check_fault_status = true;
+ sma1307->init_vol = 0x32;
+ sma1307->cur_vol = sma1307->init_vol;
+ sma1307->sw_ot1_prot = true;
+
+ mutex_init(&sma1307->default_lock);
+
+ INIT_DELAYED_WORK(&sma1307->check_fault_work,
+ sma1307_check_fault_worker);
+
+ sma1307->dev = &client->dev;
+ sma1307->kobj = &client->dev.kobj;
+
+ i2c_set_clientdata(client, sma1307);
+
+ sma1307->pll_matches = sma1307_pll_matches;
+
+ regmap_read(sma1307->regmap,
+ SMA1307_FF_DEVICE_INDEX, &device_info);
+
+ if ((device_info & 0xF8) != SMA1307_DEVICE_ID) {
+ dev_err(&client->dev,
+ "%s: device initialization error (0x%02X)",
+ __func__, device_info);
+ return -ENODEV;
+ }
+ dev_dbg(&client->dev, "%s: chip version 0x%02X\n",
+ __func__, device_info);
+
+ i2c_set_clientdata(client, sma1307);
+
+ ret = devm_snd_soc_register_component(&client->dev,
+ &sma1307_component, sma1307_dai,
+ 1);
+
+ if (ret) {
+ dev_err(&client->dev, "%s: failed to register component\n",
+ __func__);
+
+ return ret;
+ }
+
+ return ret;
+}
+
+static void sma1307_i2c_remove(struct i2c_client *client)
+{
+ struct sma1307_priv *sma1307 =
+ (struct sma1307_priv *)i2c_get_clientdata(client);
+
+ cancel_delayed_work_sync(&sma1307->check_fault_work);
+}
+
+static const struct i2c_device_id sma1307_i2c_id[] = {
+ { "sma1307a", 0 },
+ { "sma1307aq", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, sma1307_i2c_id);
+
+static const struct of_device_id sma1307_of_match[] = {
+ {
+ .compatible = "irondevice,sma1307a",
+ },
+ {
+ .compatible = "irondevice,sma1307aq",
+ .data = &sma1307aq_data //AEC-Q100 Qualificated
+ },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, sma1307_of_match);
+
+static struct i2c_driver sma1307_i2c_driver = {
+ .driver = {
+ .name = "sma1307",
+ .of_match_table = sma1307_of_match,
+ },
+ .probe = sma1307_i2c_probe,
+ .remove = sma1307_i2c_remove,
+ .id_table = sma1307_i2c_id,
+};
+
+module_i2c_driver(sma1307_i2c_driver);
+
+MODULE_DESCRIPTION("ALSA SoC SMA1307 driver");
+MODULE_AUTHOR("Gyuhwa Park, <gyuhwa.park@irondevice.com>");
+MODULE_AUTHOR("KS Jo, <kiseok.jo@irondevice.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/sma1307.h b/sound/soc/codecs/sma1307.h
new file mode 100644
index 000000000..44aab52a3
--- /dev/null
+++ b/sound/soc/codecs/sma1307.h
@@ -0,0 +1,444 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later
+ * sma1307.h -- sma1307 ALSA SoC Audio driver
+ *
+ * Copyright 2024 Iron Device Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _SMA1307_H
+#define _SMA1307_H
+
+#include <sound/soc.h>
+
+enum sma1307_fault {
+ SMA1307_FAULT_OT1,
+ SMA1307_FAULT_OT2,
+ SMA1307_FAULT_UVLO,
+ SMA1307_FAULT_OVP_BST,
+ SMA1307_FAULT_OCP_SPK,
+ SMA1307_FAULT_OCP_BST,
+ SMA1307_FAULT_CLK
+};
+
+enum sma1307_mode {
+ SMA1307_MONO_MODE,
+ SMA1307_LEFT_MODE,
+ SMA1307_RIGHT_MODE,
+};
+
+enum sma1307_sdo_mode {
+ SMA1307_OUT_DATA_ONE_48K,
+ SMA1307_OUT_DATA_TWO_48K,
+ SMA1307_OUT_DATA_TWO_24K,
+ SMA1307_OUT_CLK_PLL,
+ SMA1307_OUT_CLK_OSC
+};
+
+enum sma1307_sdo_source {
+ SMA1307_OUT_DISABLE,
+ SMA1307_OUT_FORMAT_C,
+ SMA1307_OUT_MIXER_OUT,
+ SMA1307_OUT_AFTER_DSP,
+ SMA1307_OUT_VRMS2_AVG,
+ SMA1307_OUT_BATTERY,
+ SMA1307_OUT_TEMP,
+ SMA1307_OUT_AFTER_DELAY
+};
+
+struct sma1307_setting_file {
+ bool status;
+ char *header;
+ int *def;
+ int *mode_set[5];
+ int checksum;
+ int num_mode;
+ size_t header_size;
+ size_t def_size;
+ size_t mode_size;
+};
+
+#define SMA1307_I2C_ADDR_00 0x1e
+#define SMA1307_I2C_ADDR_01 0x3e
+#define SMA1307_I2C_ADDR_10 0x5e
+#define SMA1307_I2C_ADDR_11 0x7e
+
+#define DEVICE_NAME_SMA1307A "sma1307a"
+#define DEVICE_NAME_SMA1307AQ "sma1307aq"
+
+#define SMA1307_EXTERNAL_CLOCK_19_2 0x00
+#define SMA1307_EXTERNAL_CLOCK_24_576 0x01
+#define SMA1307_PLL_CLKIN_MCLK 0x02
+#define SMA1307_PLL_CLKIN_BCLK 0x03
+
+#define SMA1307_OFFSET_DEFAULT_MODE 0x00
+#define SMA1307_OFFSET_BURNING_MODE 0x01
+
+#define SMA1307_SETTING_HEADER_SIZE 0x08
+#define SMA1307_SETTING_DEFAULT_SIZE 0xC0
+
+#define SMA1307_DEFAULT_SET 0x00
+#define SMA1307_BINARY_FILE_SET 0x01
+
+/* Controls Name */
+#define SMA1307_REG_CTRL_NAME "Register Byte Control"
+#define SMA1307_VOL_CTRL_NAME "Speaker Volume"
+#define SMA1307_FORCE_MUTE_CTRL_NAME "Force Mute Switch"
+#define SMA1307_TDM_RX0_POS_NAME "TDM RX Slot0 Position"
+#define SMA1307_TDM_RX1_POS_NAME "TDM RX Slot1 Position"
+#define SMA1307_TDM_TX0_POS_NAME "TDM TX Slot0 Position"
+#define SMA1307_TDM_TX1_POS_NAME "TDM TX Slot1 Position"
+#define SMA1307_OT1_SW_PROT_CTRL_NAME "OT1 SW Protection Switch"
+#define SMA1307_RESET_CTRL_NAME "Reset Switch"
+#define SMA1307_CHECK_FAULT_STATUS_NAME "Check Fault Status"
+#define SMA1307_CHECK_FAULT_PERIOD_NAME "Check Fault Period"
+
+/* DAPM Name */
+#define SMA1307_AIF_IN_NAME "AIF IN Source"
+#define SMA1307_AIF_OUT0_NAME "AIF OUT0 Source"
+#define SMA1307_AIF_OUT1_NAME "AIF OUT1 Source"
+
+/*
+ * SMA1307 Register Definition
+ */
+
+/* SMA1307 Register Addresses */
+#define SMA1307_00_SYSTEM_CTRL 0x00
+#define SMA1307_01_INPUT_CTRL1 0x01
+#define SMA1307_02_BROWN_OUT_PROT1 0x02
+#define SMA1307_03_BROWN_OUT_PROT2 0x03
+#define SMA1307_04_BROWN_OUT_PROT3 0x04
+#define SMA1307_05_BROWN_OUT_PROT8 0x05
+#define SMA1307_06_BROWN_OUT_PROT9 0x06
+#define SMA1307_07_BROWN_OUT_PROT10 0x07
+#define SMA1307_08_BROWN_OUT_PROT11 0x08
+#define SMA1307_09_OUTPUT_CTRL 0x09
+#define SMA1307_0A_SPK_VOL 0x0A
+#define SMA1307_0B_BST_TEST 0x0B
+#define SMA1307_0C_BOOST_CTRL8 0x0C
+#define SMA1307_0D_SPK_TEST 0x0D
+#define SMA1307_0E_MUTE_VOL_CTRL 0x0E
+#define SMA1307_0F_VBAT_TEMP_SENSING 0x0F
+
+#define SMA1307_10_SYSTEM_CTRL1 0x10
+#define SMA1307_11_SYSTEM_CTRL2 0x11
+#define SMA1307_12_SYSTEM_CTRL3 0x12
+#define SMA1307_13_DELAY 0x13
+#define SMA1307_14_MODULATOR 0x14
+#define SMA1307_15_BASS_SPK1 0x15
+#define SMA1307_16_BASS_SPK2 0x16
+#define SMA1307_17_BASS_SPK3 0x17
+#define SMA1307_18_BASS_SPK4 0x18
+#define SMA1307_19_BASS_SPK5 0x19
+#define SMA1307_1A_BASS_SPK6 0x1A
+#define SMA1307_1B_BASS_SPK7 0x1B
+#define SMA1307_1C_BROWN_OUT_PROT20 0x1C
+#define SMA1307_1D_BROWN_OUT_PROT0 0x1D
+#define SMA1307_1E_TONE_GENERATOR 0x1E
+#define SMA1307_1F_TONE_FINE_VOLUME 0x1F
+
+#define SMA1307_22_COMP_HYS_SEL 0x22
+#define SMA1307_23_COMPLIM1 0x23
+#define SMA1307_24_COMPLIM2 0x24
+#define SMA1307_25_COMPLIM3 0x25
+#define SMA1307_26_COMPLIM4 0x26
+#define SMA1307_27_BROWN_OUT_PROT4 0x27
+#define SMA1307_28_BROWN_OUT_PROT5 0x28
+#define SMA1307_29_BROWN_OUT_PROT12 0x29
+#define SMA1307_2A_BROWN_OUT_PROT13 0x2A
+#define SMA1307_2B_BROWN_OUT_PROT14 0x2B
+#define SMA1307_2C_BROWN_OUT_PROT15 0x2C
+#define SMA1307_2D_BROWN_OUT_PROT6 0x2D
+#define SMA1307_2E_BROWN_OUT_PROT7 0x2E
+#define SMA1307_2F_BROWN_OUT_PROT16 0x2F
+
+#define SMA1307_30_BROWN_OUT_PROT17 0x30
+#define SMA1307_31_BROWN_OUT_PROT18 0x31
+#define SMA1307_32_BROWN_OUT_PROT19 0x32
+#define SMA1307_34_OCP_SPK 0x34
+#define SMA1307_35_FDPEC_CTRL0 0x35
+#define SMA1307_36_PROTECTION 0x36
+#define SMA1307_37_SLOPECTRL 0x37
+#define SMA1307_38_POWER_METER 0x38
+#define SMA1307_39_PMT_NZ_VAL 0x39
+#define SMA1307_3B_TEST1 0x3B
+#define SMA1307_3C_TEST2 0x3C
+#define SMA1307_3D_TEST3 0x3D
+#define SMA1307_3E_IDLE_MODE_CTRL 0x3E
+#define SMA1307_3F_ATEST2 0x3F
+#define SMA1307_8B_PLL_POST_N 0x8B
+#define SMA1307_8C_PLL_N 0x8C
+#define SMA1307_8D_PLL_A_SETTING 0x8D
+#define SMA1307_8E_PLL_P_CP 0x8E
+#define SMA1307_8F_ANALOG_TEST 0x8F
+
+#define SMA1307_90_CRESTLIM1 0x90
+#define SMA1307_91_CRESTLIM2 0x91
+#define SMA1307_92_FDPEC_CTRL1 0x92
+#define SMA1307_93_INT_CTRL 0x93
+#define SMA1307_94_BOOST_CTRL9 0x94
+#define SMA1307_95_BOOST_CTRL10 0x95
+#define SMA1307_96_BOOST_CTRL11 0x96
+#define SMA1307_97_OTP_TRM0 0x97
+#define SMA1307_98_OTP_TRM1 0x98
+#define SMA1307_99_OTP_TRM2 0x99
+#define SMA1307_9A_OTP_TRM3 0x9A
+
+#define SMA1307_A0_PAD_CTRL0 0xA0
+#define SMA1307_A1_PAD_CTRL1 0xA1
+#define SMA1307_A2_TOP_MAN1 0xA2
+#define SMA1307_A3_TOP_MAN2 0xA3
+#define SMA1307_A4_TOP_MAN3 0xA4
+#define SMA1307_A5_TDM1 0xA5
+#define SMA1307_A6_TDM2 0xA6
+#define SMA1307_A7_CLK_MON 0xA7
+#define SMA1307_A8_BOOST_CTRL1 0xA8
+#define SMA1307_A9_BOOST_CTRL2 0xA9
+#define SMA1307_AA_BOOST_CTRL3 0xAA
+#define SMA1307_AB_BOOST_CTRL4 0xAB
+#define SMA1307_AC_BOOST_CTRL5 0xAC
+#define SMA1307_AD_BOOST_CTRL6 0xAD
+#define SMA1307_AE_BOOST_CTRL7 0xAE
+#define SMA1307_AF_LPF 0xAF
+
+#define SMA1307_B0_RMS_TC1 0xB0
+#define SMA1307_B1_RMS_TC2 0xB1
+#define SMA1307_B2_AVG_TC1 0xB2
+#define SMA1307_B3_AVG_TC2 0xB3
+#define SMA1307_B4_PRVALUE1 0xB4
+#define SMA1307_B5_PRVALUE2 0xB5
+#define SMA1307_B8_SPK_NG_CTRL1 0xB8
+#define SMA1307_B9_SPK_NG_CTRL2 0xB9
+#define SMA1307_BA_DGC1 0xBA
+#define SMA1307_BB_DGC2 0xBB
+#define SMA1307_BC_DGC3 0xBC
+#define SMA1307_BD_MCBS_CTRL1 0xBD
+#define SMA1307_BE_MCBS_CTRL2 0xBE
+
+/* Status Register Read Only */
+#define SMA1307_F5_READY_FOR_V_SAR 0xF5
+#define SMA1307_F7_READY_FOR_T_SAR 0xF7
+#define SMA1307_F8_STATUS_T1 0xF8
+#define SMA1307_F9_STATUS_T2 0xF9
+#define SMA1307_FA_STATUS1 0xFA
+#define SMA1307_FB_STATUS2 0xFB
+#define SMA1307_FC_STATUS3 0xFC
+#define SMA1307_FD_STATUS4 0xFD
+#define SMA1307_FE_STATUS5 0xFE
+#define SMA1307_FF_DEVICE_INDEX 0xFF
+
+/* SMA1307 Registers Bit Fields */
+/* Power On/Off */
+#define SMA1307_POWER_MASK BIT(0)
+#define SMA1307_POWER_OFF 0
+#define SMA1307_POWER_ON BIT(0)
+
+/* Reset */
+#define SMA1307_RESET_MASK BIT(1)
+#define SMA1307_RESET_ON BIT(1)
+
+/* Left Polarity */
+#define SMA1307_LEFTPOL_MASK BIT(3)
+#define SMA1307_LOW_FIRST_CH 0
+#define SMA1307_HIGH_FIRST_CH BIT(3)
+
+/* SCK Falling/Rising */
+#define SMA1307_SCK_RISING_MASK BIT(2)
+#define SMA1307_SCK_FALLING_EDGE 0
+#define SMA1307_SCK_RISING_EDGE BIT(2)
+
+/* SPK Mute */
+#define SMA1307_SPK_MUTE_MASK BIT(0)
+#define SMA1307_SPK_UNMUTE 0
+#define SMA1307_SPK_MUTE BIT(0)
+
+/* SPK Mode */
+#define SMA1307_SPK_MODE_MASK (BIT(2)|BIT(3)|BIT(4))
+#define SMA1307_SPK_OFF 0
+#define SMA1307_SPK_MONO BIT(2)
+#define SMA1307_SPK_STEREO BIT(4)
+
+/* Mono Mix */
+#define SMA1307_MONOMIX_MASK BIT(0)
+#define SMA1307_MONOMIX_OFF 0
+#define SMA1307_MONOMIX_ON BIT(0)
+
+/* LR Data Swap */
+#define SMA1307_LR_DATA_SW_MASK BIT(4)
+#define SMA1307_LR_DATA_SW_NORMAL 0
+#define SMA1307_LR_DATA_SW_SWAP BIT(4)
+
+/* PLL On/Off */
+#define SMA1307_PLL_MASK BIT(6)
+#define SMA1307_PLL_ON 0
+#define SMA1307_PLL_OFF BIT(6)
+
+/* Input Format */
+#define SMA1307_I2S_MODE_MASK (BIT(4)|BIT(5)|BIT(6))
+#define SMA1307_STANDARD_I2S 0
+#define SMA1307_LJ BIT(4)
+#define SMA1307_RJ_16BIT BIT(6)
+#define SMA1307_RJ_18BIT (BIT(4)|BIT(6))
+#define SMA1307_RJ_20BIT (BIT(5)|BIT(6))
+#define SMA1307_RJ_24BIT (BIT(4)|BIT(5)|BIT(6))
+
+/* Controller / Device Setting */
+#define SMA1307_CONTROLLER_DEVICE_MASK BIT(7)
+#define SMA1307_DEVICE_MODE 0
+#define SMA1307_CONTROLLER_MODE BIT(7)
+
+/* Port Config */
+#define SMA1307_PORT_CONFIG_MASK (BIT(6)|BIT(7))
+#define SMA1307_INPUT_PORT_ONLY 0
+#define SMA1307_OUTPUT_PORT_ENABLE BIT(7)
+
+/* SDO Output */
+#define SMA1307_SDO_OUTPUT_MASK BIT(3)
+#define SMA1307_LOGIC_OUTPUT 0
+#define SMA1307_HIGH_Z_OUTPUT BIT(3)
+
+#define SMA1307_DATA_CLK_SEL_MASK (BIT(6)|BIT(7))
+#define SMA1307_SDO_DATA 0
+#define SMA1307_SDO_CLK_PLL BIT(6)
+#define SMA1307_SDO_CLK_OSC (BIT(6)|BIT(7))
+
+/* SDO Output2 */
+#define SMA1307_SDO_OUTPUT2_MASK BIT(0)
+#define SMA1307_ONE_SDO_PER_CH 0
+#define SMA1307_TWO_SDO_PER_CH BIT(0)
+
+/* SDO Output3 */
+#define SMA1307_SDO_OUTPUT3_MASK BIT(2)
+#define SMA1307_SDO_OUTPUT3_DIS 0
+#define SMA1307_TWO_SDO_PER_CH_24K BIT(2)
+
+/* SDO OUT1 Select*/
+#define SMA1307_SDO_OUT1_SEL_MASK (BIT(3)|BIT(4)|BIT(5))
+#define SMA1307_SDO1_DISABLE 0
+#define SMA1307_SDO1_FORMAT_C BIT(3)
+#define SMA1307_SDO1_MONO_MIX BIT(4)
+#define SMA1307_SDO1_AFTER_DSP (BIT(3)|BIT(4))
+#define SMA1307_SDO1_VRMS2_AVG BIT(5)
+#define SMA1307_SDO1_VBAT_MON (BIT(3)|BIT(5))
+#define SMA1307_SDO1_TEMP_MON (BIT(4)|BIT(5))
+#define SMA1307_SDO1_AFTER_DELAY (BIT(3)|BIT(4)|BIT(5))
+
+/* SDO OUT0 Select*/
+#define SMA1307_SDO_OUT0_SEL_MASK (BIT(0)|BIT(1)|BIT(2))
+#define SMA1307_SDO0_DISABLE 0
+#define SMA1307_SDO0_FORMAT_C BIT(0)
+#define SMA1307_SDO0_MONO_MIX BIT(1)
+#define SMA1307_SDO0_AFTER_DSP (BIT(0)|BIT(1))
+#define SMA1307_SDO0_VRMS2_AVG BIT(2)
+#define SMA1307_SDO0_VBAT_MON (BIT(0)|BIT(2))
+#define SMA1307_SDO0_TEMP_MON (BIT(1)|BIT(2))
+#define SMA1307_SDO0_AFTER_DELAY (BIT(0)|BIT(1)|BIT(2))
+
+/* INTERRUPT Operation */
+#define SMA1307_SEL_INT_MASK BIT(2)
+#define SMA1307_INT_CLEAR_AUTO 0
+#define SMA1307_INT_CLEAR_MANUAL BIT(2)
+
+/* INTERRUPT CLEAR */
+#define SMA1307_CLR_INT_MASK BIT(1)
+#define SMA1307_INT_READY 0
+#define SMA1307_INT_CLEAR BIT(1)
+
+/* INTERRUPT Disable */
+#define SMA1307_DIS_INT_MASK BIT(0)
+#define SMA1307_NORMAL_INT 0
+#define SMA1307_HIGH_Z_INT BIT(0)
+
+/* Interface Control */
+#define SMA1307_INTERFACE_MASK (BIT(5)|BIT(6)|BIT(7))
+#define SMA1307_LJ_FORMAT BIT(5)
+#define SMA1307_I2S_FORMAT (BIT(5)|BIT(6))
+#define SMA1307_TDM_FORMAT BIT(7)
+
+#define SMA1307_SCK_RATE_MASK (BIT(3)|BIT(4))
+#define SMA1307_SCK_64FS 0
+#define SMA1307_SCK_32FS BIT(4)
+
+#define SMA1307_DATA_WIDTH_MASK (BIT(1)|BIT(2))
+#define SMA1307_DATA_24BIT 0
+#define SMA1307_DATA_16BIT (BIT(1)|BIT(2))
+
+#define SMA1307_TDM_TX_MODE_MASK BIT(6)
+#define SMA1307_TDM_TX_MONO 0
+#define SMA1307_TDM_TX_STEREO BIT(6)
+
+#define SMA1307_TDM_SLOT0_RX_POS_MASK (BIT(3)|BIT(4)|BIT(5))
+#define SMA1307_TDM_SLOT0_RX_POS_0 0
+#define SMA1307_TDM_SLOT0_RX_POS_1 BIT(3)
+#define SMA1307_TDM_SLOT0_RX_POS_2 BIT(4)
+#define SMA1307_TDM_SLOT0_RX_POS_3 (BIT(3)|BIT(4))
+#define SMA1307_TDM_SLOT0_RX_POS_4 BIT(5)
+#define SMA1307_TDM_SLOT0_RX_POS_5 (BIT(3)|BIT(5))
+#define SMA1307_TDM_SLOT0_RX_POS_6 (BIT(4)|BIT(5))
+#define SMA1307_TDM_SLOT0_RX_POS_7 (BIT(3)|BIT(4)|BIT(5))
+
+#define SMA1307_TDM_SLOT1_RX_POS_MASK (BIT(0)|BIT(1)|BIT(2))
+#define SMA1307_TDM_SLOT1_RX_POS_0 0
+#define SMA1307_TDM_SLOT1_RX_POS_1 BIT(0)
+#define SMA1307_TDM_SLOT1_RX_POS_2 BIT(1)
+#define SMA1307_TDM_SLOT1_RX_POS_3 (BIT(0)|BIT(1))
+#define SMA1307_TDM_SLOT1_RX_POS_4 BIT(2)
+#define SMA1307_TDM_SLOT1_RX_POS_5 (BIT(0)|BIT(2))
+#define SMA1307_TDM_SLOT1_RX_POS_6 (BIT(1)|BIT(2))
+#define SMA1307_TDM_SLOT1_RX_POS_7 (BIT(0)|BIT(1)|BIT(2))
+
+/* TDM2 FORMAT : 0xA6 */
+#define SMA1307_TDM_DL_MASK BIT(7)
+#define SMA1307_TDM_DL_16 0
+#define SMA1307_TDM_DL_32 BIT(7)
+
+#define SMA1307_TDM_N_SLOT_MASK BIT(6)
+#define SMA1307_TDM_N_SLOT_4 0
+#define SMA1307_TDM_N_SLOT_8 BIT(6)
+
+#define SMA1307_TDM_SLOT0_TX_POS_MASK (BIT(3)|BIT(4)|BIT(5))
+#define SMA1307_TDM_SLOT0_TX_POS_0 0
+#define SMA1307_TDM_SLOT0_TX_POS_1 BIT(3)
+#define SMA1307_TDM_SLOT0_TX_POS_2 BIT(4)
+#define SMA1307_TDM_SLOT0_TX_POS_3 (BIT(3)|BIT(4))
+#define SMA1307_TDM_SLOT0_TX_POS_4 BIT(5)
+#define SMA1307_TDM_SLOT0_TX_POS_5 (BIT(3)|BIT(5))
+#define SMA1307_TDM_SLOT0_TX_POS_6 (BIT(4)|BIT(5))
+#define SMA1307_TDM_SLOT0_TX_POS_7 (BIT(3)|BIT(4)|BIT(5))
+
+#define SMA1307_TDM_SLOT1_TX_POS_MASK (BIT(0)|BIT(1)|BIT(2))
+#define SMA1307_TDM_SLOT1_TX_POS_0 0
+#define SMA1307_TDM_SLOT1_TX_POS_1 BIT(0)
+#define SMA1307_TDM_SLOT1_TX_POS_2 BIT(1)
+#define SMA1307_TDM_SLOT1_TX_POS_3 (BIT(0)|BIT(1))
+#define SMA1307_TDM_SLOT1_TX_POS_4 BIT(2)
+#define SMA1307_TDM_SLOT1_TX_POS_5 (BIT(0)|BIT(2))
+#define SMA1307_TDM_SLOT1_TX_POS_6 (BIT(1)|BIT(2))
+#define SMA1307_TDM_SLOT1_TX_POS_7 (BIT(0)|BIT(1)|BIT(2))
+
+/* OTP STATUS */
+#define SMA1307_OTP_STAT_MASK BIT(6)
+#define SMA1307_OTP_STAT_0 0
+#define SMA1307_OTP_STAT_1 BIT(6)
+
+/* STATUS */
+#define SMA1307_OT1_OK_STATUS BIT(7)
+#define SMA1307_OT2_OK_STATUS BIT(6)
+#define SMA1307_UVLO_STATUS BIT(5)
+#define SMA1307_OVP_BST_STATUS BIT(4)
+#define SMA1307_POWER_FLAG BIT(3)
+
+#define SMA1307_SCAN_CHK BIT(7)
+#define SMA1307_OCP_SPK_STATUS BIT(5)
+#define SMA1307_OCP_BST_STATUS BIT(4)
+#define SMA1307_BOP_STATE (BIT(1)|BIT(2)|BIT(3))
+#define SMA1307_CLK_MON_STATUS BIT(0)
+
+#define SMA1307_DEVICE_ID (BIT(3)|BIT(4))
+#define SMA1307_REV_NUM_STATUS (BIT(0)|BIT(1))
+#define SMA1307_REV_NUM_REV0 0
+#define SMA1307_REV_NUM_REV1 BIT(0)
+
+#endif
--
2.39.2
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v3 2/2] ASoC: sma1307: Add driver for Iron Device SMA1307
2024-11-04 7:33 ` [PATCH v3 2/2] ASoC: sma1307: Add driver for Iron Device SMA1307 Ki-Seok Jo
@ 2024-11-04 14:03 ` Mark Brown
2024-11-05 0:13 ` Ki-Seok Jo
0 siblings, 1 reply; 9+ messages in thread
From: Mark Brown @ 2024-11-04 14:03 UTC (permalink / raw)
To: Ki-Seok Jo
Cc: Liam Girdwood, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Jaroslav Kysela, Takashi Iwai, alsa-devel@alsa-project.org,
linux-sound@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
[-- Attachment #1: Type: text/plain, Size: 434 bytes --]
On Mon, Nov 04, 2024 at 07:33:50AM +0000, Ki-Seok Jo wrote:
>
> The Iron Device SMA1307 is a boosted digital speaker amplifier
>
> v2 -> v3
> - Use BIT() macro
> - Changed the value in sizeof
The changelog should go after the --- so the tools automatically drop
it.
> ---
> To | 0
This looks like it got in by mistake. Other than that things look good,
I've fixed this up manually.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v3 1/2] ASoC: dt-bindings: irondevice,sma1307: Add initial DT binding
2024-11-04 7:33 ` [PATCH v3 1/2] ASoC: dt-bindings: irondevice,sma1307: Add initial DT binding Ki-Seok Jo
@ 2024-11-04 16:17 ` Rob Herring
2024-11-04 16:41 ` Mark Brown
2024-11-05 0:10 ` FW: " Ki-Seok Jo
2024-11-07 21:52 ` Mark Brown
1 sibling, 2 replies; 9+ messages in thread
From: Rob Herring @ 2024-11-04 16:17 UTC (permalink / raw)
To: Ki-Seok Jo
Cc: Liam Girdwood, Mark Brown, Krzysztof Kozlowski, Conor Dooley,
Jaroslav Kysela, Takashi Iwai, alsa-devel@alsa-project.org,
linux-sound@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
On Mon, Nov 04, 2024 at 07:33:47AM +0000, Ki-Seok Jo wrote:
>
I don't see the rest of the series (I fetch from lore). That means your
threading is broken.
> This adds the schema binding for the Iron Device SMA1307 Amp
>
> Signed-off-by: Kiseok Jo <kiseok.jo@irondevice.com>
> ---
v3, but where is the revision history?
> .../bindings/sound/irondevice,sma1307.yaml | 54 ++++++++++++++++++++++
> 1 file changed, 54 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/sound/irondevice,sma1307.yaml b/Documentation/devicetree/bindings/sound/irondevice,sma1307.yaml
> new file mode 100644
> index 000000000..0bb4ee664
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/irondevice,sma1307.yaml
> @@ -0,0 +1,54 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
"%YAML 1.2" goes on the 2nd line.
> +---
> +$id: http://devicetree.org/schemas/sound/irondevice,sma1307.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Iron Device SMA1307 Audio Amplifier
> +
> +maintainers:
> + - Kiseok Jo <kiseok.jo@irondevice.com>
> +
> +description:
> + SMA1307 boosted digital speaker amplifier
> + with feedback-loop.
Wrap lines at 80 char.
> +
> +allOf:
> + - $ref: dai-common.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - irondevice,sma1307a
> + - irondevice,sma1307aq
> + description:
> + If a 'q' is added, it indicated the product is AEC-Q100
> + qualified for automotive applications. SMA1307A supports
> + both WLCSP and QFN packages. However, SMA1307AQ only
> + supports the QFN package.
Is this difference visible to software? The package is not, so that part
is irrelevant.
> +
> + reg:
> + maxItems: 1
> +
> + '#sound-dai-cells':
> + const: 1
> +
> +required:
> + - compatible
> + - reg
> + - '#sound-dai-cells'
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + amplifier@1e {
> + compatible = "irondevice,sma1307a";
> + reg = <0x1e>;
> + #sound-dai-cells = <1>;
> + };
> + };
>
> --
> 2.39.2
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v3 1/2] ASoC: dt-bindings: irondevice,sma1307: Add initial DT binding
2024-11-04 16:17 ` Rob Herring
@ 2024-11-04 16:41 ` Mark Brown
2024-11-05 0:10 ` FW: " Ki-Seok Jo
1 sibling, 0 replies; 9+ messages in thread
From: Mark Brown @ 2024-11-04 16:41 UTC (permalink / raw)
To: Rob Herring
Cc: Ki-Seok Jo, Liam Girdwood, Krzysztof Kozlowski, Conor Dooley,
Jaroslav Kysela, Takashi Iwai, alsa-devel@alsa-project.org,
linux-sound@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
[-- Attachment #1: Type: text/plain, Size: 688 bytes --]
On Mon, Nov 04, 2024 at 10:17:51AM -0600, Rob Herring wrote:
> On Mon, Nov 04, 2024 at 07:33:47AM +0000, Ki-Seok Jo wrote:
> > + enum:
> > + - irondevice,sma1307a
> > + - irondevice,sma1307aq
> > + description:
> > + If a 'q' is added, it indicated the product is AEC-Q100
> > + qualified for automotive applications. SMA1307A supports
> > + both WLCSP and QFN packages. However, SMA1307AQ only
> > + supports the QFN package.
> Is this difference visible to software? The package is not, so that part
> is irrelevant.
It seems reasonable to allow it as a compatible if it's sold as a
separate part, even if we don't need to care.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* FW: [PATCH v3 1/2] ASoC: dt-bindings: irondevice,sma1307: Add initial DT binding
2024-11-04 16:17 ` Rob Herring
2024-11-04 16:41 ` Mark Brown
@ 2024-11-05 0:10 ` Ki-Seok Jo
1 sibling, 0 replies; 9+ messages in thread
From: Ki-Seok Jo @ 2024-11-05 0:10 UTC (permalink / raw)
To: Rob Herring
Cc: Liam Girdwood, Mark Brown, Krzysztof Kozlowski, Conor Dooley,
Jaroslav Kysela, Takashi Iwai, alsa-devel@alsa-project.org,
linux-sound@vger.kernel.org
>
> On Mon, Nov 04, 2024 at 07:33:47AM +0000, Ki-Seok Jo wrote:
> >
>
> I don't see the rest of the series (I fetch from lore). That means your
> threading is broken.
Okay, I see.
It appears that using the b4 tool this time may have caused some issues,
resulting in the removal of previous content. I would appreciate any
suggestions you might have for reconnecting the series. Thank you!
>
> > This adds the schema binding for the Iron Device SMA1307 Amp
> >
> > Signed-off-by: Kiseok Jo <kiseok.jo@irondevice.com>
> > ---
>
> v3, but where is the revision history?
Yes, that sounds good. Thank you!
There are changes before v2, but there are no changes in this section
when transitioning to v3, so I didn't include anything.
Would it be better to add the previous changes and indicate that
there are no changes when moving to v3?
Thank you for your help!
I'll reflect on the points you've mentioned and update it to v4.
If I download the source again, make the necessary modifications,
and then just change the version to v4 before sending it,
could that cause the threading to break again?
^ permalink raw reply [flat|nested] 9+ messages in thread
* RE: [PATCH v3 2/2] ASoC: sma1307: Add driver for Iron Device SMA1307
2024-11-04 14:03 ` Mark Brown
@ 2024-11-05 0:13 ` Ki-Seok Jo
0 siblings, 0 replies; 9+ messages in thread
From: Ki-Seok Jo @ 2024-11-05 0:13 UTC (permalink / raw)
To: Mark Brown
Cc: Liam Girdwood, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Jaroslav Kysela, Takashi Iwai, alsa-devel@alsa-project.org,
linux-sound@vger.kernel.org
[-- Attachment #1: Type: text/plain, Size: 636 bytes --]
>
> On Mon, Nov 04, 2024 at 07:33:50AM +0000, Ki-Seok Jo wrote:
> >
> > The Iron Device SMA1307 is a boosted digital speaker amplifier
> >
> > v2 -> v3
> > - Use BIT() macro
> > - Changed the value in sizeof
>
> The changelog should go after the --- so the tools automatically drop it.
>
> > ---
> > To | 0
>
> This looks like it got in by mistake. Other than that things look good, I've
> fixed this up manually.
Thank you so much. I appreciate it, and I apologize for missing that.
I'm glad there are no other issues.
I will revise the DT-Binding section and send it again.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 499 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v3 1/2] ASoC: dt-bindings: irondevice,sma1307: Add initial DT binding
2024-11-04 7:33 ` [PATCH v3 1/2] ASoC: dt-bindings: irondevice,sma1307: Add initial DT binding Ki-Seok Jo
2024-11-04 16:17 ` Rob Herring
@ 2024-11-07 21:52 ` Mark Brown
1 sibling, 0 replies; 9+ messages in thread
From: Mark Brown @ 2024-11-07 21:52 UTC (permalink / raw)
To: Liam Girdwood, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Jaroslav Kysela, Takashi Iwai, Ki-Seok Jo
Cc: alsa-devel, linux-sound, devicetree, linux-kernel
On Mon, 04 Nov 2024 07:33:47 +0000, Ki-Seok Jo wrote:
> This adds the schema binding for the Iron Device SMA1307 Amp
>
>
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/2] ASoC: dt-bindings: irondevice,sma1307: Add initial DT binding
(no commit info)
[2/2] ASoC: sma1307: Add driver for Iron Device SMA1307
commit: 576c57e6b4c1d734bcb7cc33dde9a99a9383b520
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2024-11-07 21:53 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20241104-irondevice-sma1307-v3-0-4bbe79895f54@irondevice.com>
2024-11-04 7:33 ` [PATCH v3 0/2] Add a driver for the Iron Device SMA1307 Amp Ki-Seok Jo
[not found] ` <20241104-irondevice-sma1307-v3-1-4bbe79895f54@irondevice.com>
2024-11-04 7:33 ` [PATCH v3 1/2] ASoC: dt-bindings: irondevice,sma1307: Add initial DT binding Ki-Seok Jo
2024-11-04 16:17 ` Rob Herring
2024-11-04 16:41 ` Mark Brown
2024-11-05 0:10 ` FW: " Ki-Seok Jo
2024-11-07 21:52 ` Mark Brown
[not found] ` <20241104-irondevice-sma1307-v3-2-4bbe79895f54@irondevice.com>
2024-11-04 7:33 ` [PATCH v3 2/2] ASoC: sma1307: Add driver for Iron Device SMA1307 Ki-Seok Jo
2024-11-04 14:03 ` Mark Brown
2024-11-05 0:13 ` Ki-Seok Jo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.