From: Masahiro Yamada <masahiroy@kernel.org>
To: linux-kbuild@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, rust-for-linux@vger.kernel.org,
cocci@inria.fr, Masahiro Yamada <masahiroy@kernel.org>,
Nicolas Schier <nicolas@fjasle.eu>
Subject: [cocci] [PATCH v2 07/11] kbuild: support building external modules in a separate build directory
Date: Sun, 10 Nov 2024 10:34:35 +0900 [thread overview]
Message-ID: <20241110013649.34903-8-masahiroy@kernel.org> (raw)
In-Reply-To: <20241110013649.34903-1-masahiroy@kernel.org>
There has been a long-standing request to support building external
modules in a separate build directory.
This commit introduces a new environment variable, KBUILD_EXTMOD_OUTPUT,
and its shorthand Make variable, MO.
A simple usage:
$ make -C <kernel-dir> M=<module-src-dir> MO=<module-build-dir>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
---
Changes in v2:
- Add -I $(src) -I $(obj) for external modules as well
- Fix a typo 'Speficies' to 'Specifies'.
Documentation/kbuild/kbuild.rst | 8 +++++++-
Documentation/kbuild/modules.rst | 8 +++++++-
Makefile | 22 +++++++++++++++++++---
scripts/Makefile.host | 8 +++-----
scripts/Makefile.lib | 2 --
5 files changed, 36 insertions(+), 12 deletions(-)
diff --git a/Documentation/kbuild/kbuild.rst b/Documentation/kbuild/kbuild.rst
index 1796b3eba37b..17c9f920f03d 100644
--- a/Documentation/kbuild/kbuild.rst
+++ b/Documentation/kbuild/kbuild.rst
@@ -137,12 +137,18 @@ Specify the output directory when building the kernel.
This variable can also be used to point to the kernel output directory when
building external modules against a pre-built kernel in a separate build
directory. Please note that this does NOT specify the output directory for the
-external modules themselves.
+external modules themselves. (Use KBUILD_EXTMOD_OUTPUT for that purpose.)
The output directory can also be specified using "O=...".
Setting "O=..." takes precedence over KBUILD_OUTPUT.
+KBUILD_EXTMOD_OUTPUT
+--------------------
+Specify the output directory for external modules.
+
+Setting "MO=..." takes precedence over KBUILD_EXTMOD_OUTPUT.
+
KBUILD_EXTRA_WARN
-----------------
Specify the extra build checks. The same value can be assigned by passing
diff --git a/Documentation/kbuild/modules.rst b/Documentation/kbuild/modules.rst
index cd5a54d91e6d..a01f3754c7fc 100644
--- a/Documentation/kbuild/modules.rst
+++ b/Documentation/kbuild/modules.rst
@@ -66,7 +66,10 @@ Options
of the kernel output directory if the kernel was built in a separate
build directory.)
- make -C $KDIR M=$PWD
+ You can optionally pass MO= option if you want to build the modules in
+ a separate directory.
+
+ make -C $KDIR M=$PWD [MO=$BUILD_DIR]
-C $KDIR
The directory that contains the kernel and relevant build
@@ -80,6 +83,9 @@ Options
directory where the external module (kbuild file) is
located.
+ MO=$BUILD_DIR
+ Specifies a separate output directory for the external module.
+
Targets
-------
diff --git a/Makefile b/Makefile
index c7eeb10455b6..38ce19747728 100644
--- a/Makefile
+++ b/Makefile
@@ -134,6 +134,10 @@ ifeq ("$(origin M)", "command line")
KBUILD_EXTMOD := $(M)
endif
+ifeq ("$(origin MO)", "command line")
+ KBUILD_EXTMOD_OUTPUT := $(MO)
+endif
+
$(if $(word 2, $(KBUILD_EXTMOD)), \
$(error building multiple external modules is not supported))
@@ -187,7 +191,7 @@ ifdef KBUILD_EXTMOD
else
objtree := $(CURDIR)
endif
- output := $(KBUILD_EXTMOD)
+ output := $(or $(KBUILD_EXTMOD_OUTPUT),$(KBUILD_EXTMOD))
# KBUILD_EXTMOD might be a relative path. Remember its absolute path before
# Make changes the working directory.
srcroot := $(realpath $(KBUILD_EXTMOD))
@@ -555,7 +559,7 @@ USERINCLUDE := \
LINUXINCLUDE := \
-I$(srctree)/arch/$(SRCARCH)/include \
-I$(objtree)/arch/$(SRCARCH)/include/generated \
- $(if $(building_out_of_srctree),-I$(srctree)/include) \
+ -I$(srctree)/include \
-I$(objtree)/include \
$(USERINCLUDE)
@@ -645,6 +649,7 @@ quiet_cmd_makefile = GEN Makefile
} > Makefile
outputmakefile:
+ifeq ($(KBUILD_EXTMOD),)
@if [ -f $(srctree)/.config -o \
-d $(srctree)/include/config -o \
-d $(srctree)/arch/$(SRCARCH)/include/generated ]; then \
@@ -654,7 +659,16 @@ outputmakefile:
echo >&2 "***"; \
false; \
fi
- $(Q)ln -fsn $(srctree) source
+else
+ @if [ -f $(srcroot)/modules.order ]; then \
+ echo >&2 "***"; \
+ echo >&2 "*** The external module source tree is not clean."; \
+ echo >&2 "*** Please run 'make -C $(abs_srctree) M=$(realpath $(srcroot)) clean'"; \
+ echo >&2 "***"; \
+ false; \
+ fi
+endif
+ $(Q)ln -fsn $(srcroot) source
$(call cmd,makefile)
$(Q)test -e .gitignore || \
{ echo "# this is build directory, ignore it"; echo "*"; } > .gitignore
@@ -1940,6 +1954,8 @@ KBUILD_MODULES := 1
endif
+prepare: outputmakefile
+
# Preset locale variables to speed up the build process. Limit locale
# tweaks to this spot to avoid wrong language settings when running
# make menuconfig etc.
diff --git a/scripts/Makefile.host b/scripts/Makefile.host
index e01c13a588dd..c1dedf646a39 100644
--- a/scripts/Makefile.host
+++ b/scripts/Makefile.host
@@ -96,12 +96,10 @@ hostrust_flags = --out-dir $(dir $@) --emit=dep-info=$(depfile) \
$(KBUILD_HOSTRUSTFLAGS) $(HOST_EXTRARUSTFLAGS) \
$(HOSTRUSTFLAGS_$(target-stem))
-# $(objtree)/$(obj) for including generated headers from checkin source files
-ifeq ($(KBUILD_EXTMOD),)
+# $(obj) for including generated headers from checkin source files
ifdef building_out_of_srctree
-hostc_flags += -I $(objtree)/$(obj)
-hostcxx_flags += -I $(objtree)/$(obj)
-endif
+hostc_flags += -I $(obj)
+hostcxx_flags += -I $(obj)
endif
#####
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index e7859ad90224..5660dfc9ed36 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -213,13 +213,11 @@ endif
# $(src) for including checkin headers from generated source files
# $(obj) for including generated headers from checkin source files
-ifeq ($(KBUILD_EXTMOD),)
ifdef building_out_of_srctree
_c_flags += $(addprefix -I, $(src) $(obj))
_a_flags += $(addprefix -I, $(src) $(obj))
_cpp_flags += $(addprefix -I, $(src) $(obj))
endif
-endif
# If $(is-kernel-object) is 'y', this object will be linked to vmlinux or modules
is-kernel-object = $(or $(part-of-builtin),$(part-of-module))
--
2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: Masahiro Yamada <masahiroy@kernel.org>
To: linux-kbuild@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, rust-for-linux@vger.kernel.org,
cocci@inria.fr, Masahiro Yamada <masahiroy@kernel.org>,
Nicolas Schier <nicolas@fjasle.eu>
Subject: [PATCH v2 07/11] kbuild: support building external modules in a separate build directory
Date: Sun, 10 Nov 2024 10:34:35 +0900 [thread overview]
Message-ID: <20241110013649.34903-8-masahiroy@kernel.org> (raw)
In-Reply-To: <20241110013649.34903-1-masahiroy@kernel.org>
There has been a long-standing request to support building external
modules in a separate build directory.
This commit introduces a new environment variable, KBUILD_EXTMOD_OUTPUT,
and its shorthand Make variable, MO.
A simple usage:
$ make -C <kernel-dir> M=<module-src-dir> MO=<module-build-dir>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
---
Changes in v2:
- Add -I $(src) -I $(obj) for external modules as well
- Fix a typo 'Speficies' to 'Specifies'.
Documentation/kbuild/kbuild.rst | 8 +++++++-
Documentation/kbuild/modules.rst | 8 +++++++-
Makefile | 22 +++++++++++++++++++---
scripts/Makefile.host | 8 +++-----
scripts/Makefile.lib | 2 --
5 files changed, 36 insertions(+), 12 deletions(-)
diff --git a/Documentation/kbuild/kbuild.rst b/Documentation/kbuild/kbuild.rst
index 1796b3eba37b..17c9f920f03d 100644
--- a/Documentation/kbuild/kbuild.rst
+++ b/Documentation/kbuild/kbuild.rst
@@ -137,12 +137,18 @@ Specify the output directory when building the kernel.
This variable can also be used to point to the kernel output directory when
building external modules against a pre-built kernel in a separate build
directory. Please note that this does NOT specify the output directory for the
-external modules themselves.
+external modules themselves. (Use KBUILD_EXTMOD_OUTPUT for that purpose.)
The output directory can also be specified using "O=...".
Setting "O=..." takes precedence over KBUILD_OUTPUT.
+KBUILD_EXTMOD_OUTPUT
+--------------------
+Specify the output directory for external modules.
+
+Setting "MO=..." takes precedence over KBUILD_EXTMOD_OUTPUT.
+
KBUILD_EXTRA_WARN
-----------------
Specify the extra build checks. The same value can be assigned by passing
diff --git a/Documentation/kbuild/modules.rst b/Documentation/kbuild/modules.rst
index cd5a54d91e6d..a01f3754c7fc 100644
--- a/Documentation/kbuild/modules.rst
+++ b/Documentation/kbuild/modules.rst
@@ -66,7 +66,10 @@ Options
of the kernel output directory if the kernel was built in a separate
build directory.)
- make -C $KDIR M=$PWD
+ You can optionally pass MO= option if you want to build the modules in
+ a separate directory.
+
+ make -C $KDIR M=$PWD [MO=$BUILD_DIR]
-C $KDIR
The directory that contains the kernel and relevant build
@@ -80,6 +83,9 @@ Options
directory where the external module (kbuild file) is
located.
+ MO=$BUILD_DIR
+ Specifies a separate output directory for the external module.
+
Targets
-------
diff --git a/Makefile b/Makefile
index c7eeb10455b6..38ce19747728 100644
--- a/Makefile
+++ b/Makefile
@@ -134,6 +134,10 @@ ifeq ("$(origin M)", "command line")
KBUILD_EXTMOD := $(M)
endif
+ifeq ("$(origin MO)", "command line")
+ KBUILD_EXTMOD_OUTPUT := $(MO)
+endif
+
$(if $(word 2, $(KBUILD_EXTMOD)), \
$(error building multiple external modules is not supported))
@@ -187,7 +191,7 @@ ifdef KBUILD_EXTMOD
else
objtree := $(CURDIR)
endif
- output := $(KBUILD_EXTMOD)
+ output := $(or $(KBUILD_EXTMOD_OUTPUT),$(KBUILD_EXTMOD))
# KBUILD_EXTMOD might be a relative path. Remember its absolute path before
# Make changes the working directory.
srcroot := $(realpath $(KBUILD_EXTMOD))
@@ -555,7 +559,7 @@ USERINCLUDE := \
LINUXINCLUDE := \
-I$(srctree)/arch/$(SRCARCH)/include \
-I$(objtree)/arch/$(SRCARCH)/include/generated \
- $(if $(building_out_of_srctree),-I$(srctree)/include) \
+ -I$(srctree)/include \
-I$(objtree)/include \
$(USERINCLUDE)
@@ -645,6 +649,7 @@ quiet_cmd_makefile = GEN Makefile
} > Makefile
outputmakefile:
+ifeq ($(KBUILD_EXTMOD),)
@if [ -f $(srctree)/.config -o \
-d $(srctree)/include/config -o \
-d $(srctree)/arch/$(SRCARCH)/include/generated ]; then \
@@ -654,7 +659,16 @@ outputmakefile:
echo >&2 "***"; \
false; \
fi
- $(Q)ln -fsn $(srctree) source
+else
+ @if [ -f $(srcroot)/modules.order ]; then \
+ echo >&2 "***"; \
+ echo >&2 "*** The external module source tree is not clean."; \
+ echo >&2 "*** Please run 'make -C $(abs_srctree) M=$(realpath $(srcroot)) clean'"; \
+ echo >&2 "***"; \
+ false; \
+ fi
+endif
+ $(Q)ln -fsn $(srcroot) source
$(call cmd,makefile)
$(Q)test -e .gitignore || \
{ echo "# this is build directory, ignore it"; echo "*"; } > .gitignore
@@ -1940,6 +1954,8 @@ KBUILD_MODULES := 1
endif
+prepare: outputmakefile
+
# Preset locale variables to speed up the build process. Limit locale
# tweaks to this spot to avoid wrong language settings when running
# make menuconfig etc.
diff --git a/scripts/Makefile.host b/scripts/Makefile.host
index e01c13a588dd..c1dedf646a39 100644
--- a/scripts/Makefile.host
+++ b/scripts/Makefile.host
@@ -96,12 +96,10 @@ hostrust_flags = --out-dir $(dir $@) --emit=dep-info=$(depfile) \
$(KBUILD_HOSTRUSTFLAGS) $(HOST_EXTRARUSTFLAGS) \
$(HOSTRUSTFLAGS_$(target-stem))
-# $(objtree)/$(obj) for including generated headers from checkin source files
-ifeq ($(KBUILD_EXTMOD),)
+# $(obj) for including generated headers from checkin source files
ifdef building_out_of_srctree
-hostc_flags += -I $(objtree)/$(obj)
-hostcxx_flags += -I $(objtree)/$(obj)
-endif
+hostc_flags += -I $(obj)
+hostcxx_flags += -I $(obj)
endif
#####
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index e7859ad90224..5660dfc9ed36 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -213,13 +213,11 @@ endif
# $(src) for including checkin headers from generated source files
# $(obj) for including generated headers from checkin source files
-ifeq ($(KBUILD_EXTMOD),)
ifdef building_out_of_srctree
_c_flags += $(addprefix -I, $(src) $(obj))
_a_flags += $(addprefix -I, $(src) $(obj))
_cpp_flags += $(addprefix -I, $(src) $(obj))
endif
-endif
# If $(is-kernel-object) is 'y', this object will be linked to vmlinux or modules
is-kernel-object = $(or $(part-of-builtin),$(part-of-module))
--
2.43.0
next prev parent reply other threads:[~2024-11-10 1:37 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-10 1:34 [cocci] [PATCH v2 00/11] kbuild: support building external modules in a separate build directory Masahiro Yamada
2024-11-10 1:34 ` Masahiro Yamada
2024-11-10 1:34 ` [cocci] [PATCH v2 01/11] kbuild: replace two $(abs_objtree) with $(CURDIR) in top Makefile Masahiro Yamada
2024-11-10 1:34 ` Masahiro Yamada
2024-11-10 1:34 ` [cocci] [PATCH v2 02/11] kbuild: add $(objtree)/ prefix to some in-kernel build artifacts Masahiro Yamada
2024-11-10 1:34 ` Masahiro Yamada
2024-11-10 1:34 ` [cocci] [PATCH v2 03/11] kbuild: rename abs_objtree to abs_output Masahiro Yamada
2024-11-10 1:34 ` Masahiro Yamada
2024-11-10 1:34 ` [cocci] [PATCH v2 04/11] kbuild: use 'output' variable to create the output directory Masahiro Yamada
2024-11-10 1:34 ` Masahiro Yamada
2024-11-10 1:34 ` [cocci] [PATCH v2 05/11] kbuild: change working directory to external module directory with M= Masahiro Yamada
2024-11-10 1:34 ` Masahiro Yamada
2024-11-18 14:47 ` [cocci] " Nicolas Schier
2024-11-18 14:47 ` Nicolas Schier
2024-11-18 17:02 ` [cocci] " Masahiro Yamada
2024-11-18 17:02 ` Masahiro Yamada
2024-11-27 15:29 ` [cocci] " Nicolas Schier
2024-11-27 15:29 ` Nicolas Schier
2024-11-27 23:15 ` [cocci] " Masahiro Yamada
2024-11-27 23:15 ` Masahiro Yamada
2024-12-04 20:51 ` [cocci] " Alison Schofield
2024-12-04 20:51 ` Alison Schofield
2024-12-05 2:33 ` [cocci] " Masahiro Yamada
2024-12-05 2:33 ` Masahiro Yamada
2024-12-04 23:35 ` Charlie Jenkins
2024-12-05 2:48 ` [cocci] " Masahiro Yamada
2024-12-05 2:48 ` Masahiro Yamada
2024-12-05 6:27 ` Charlie Jenkins
2024-12-05 2:06 ` [cocci] " Masahiro Yamada
2024-12-09 13:46 ` Thorsten Blum
2024-12-09 13:55 ` Thorsten Blum
2024-12-10 10:47 ` [cocci] " Masahiro Yamada
2024-12-10 10:47 ` Masahiro Yamada
2024-12-10 11:06 ` Thorsten Blum
2024-12-11 2:36 ` [cocci] " Masahiro Yamada
2024-12-11 2:36 ` Masahiro Yamada
2024-12-10 15:34 ` Jon Hunter
2024-12-11 2:39 ` [cocci] " Masahiro Yamada
2024-12-11 2:39 ` Masahiro Yamada
2024-12-11 12:21 ` Jon Hunter
2024-12-12 2:08 ` [cocci] " Masahiro Yamada
2024-12-12 2:08 ` Masahiro Yamada
2024-12-12 6:00 ` Jon Hunter
2024-12-12 15:49 ` [cocci] " Masahiro Yamada
2024-12-12 15:49 ` Masahiro Yamada
2025-01-27 23:08 ` [cocci] " Qu Wenruo
2025-01-27 23:08 ` Qu Wenruo
2024-11-10 1:34 ` [cocci] [PATCH v2 06/11] kbuild: remove extmod_prefix, MODORDER, MODULES_NSDEPS variables Masahiro Yamada
2024-11-10 1:34 ` Masahiro Yamada
2024-11-10 1:34 ` Masahiro Yamada [this message]
2024-11-10 1:34 ` [PATCH v2 07/11] kbuild: support building external modules in a separate build directory Masahiro Yamada
2024-11-10 1:34 ` [cocci] [PATCH v2 08/11] kbuild: support -fmacro-prefix-map for external modules Masahiro Yamada
2024-11-10 1:34 ` Masahiro Yamada
2024-11-10 1:34 ` [cocci] [PATCH v2 09/11] kbuild: use absolute path in the generated wrapper Makefile Masahiro Yamada
2024-11-10 1:34 ` Masahiro Yamada
2024-11-10 1:34 ` [cocci] [PATCH v2 10/11] kbuild: make wrapper Makefile more convenient for external modules Masahiro Yamada
2024-11-10 1:34 ` Masahiro Yamada
2024-11-10 1:34 ` [cocci] [PATCH v2 11/11] kbuild: allow to start building external modules in any directory Masahiro Yamada
2024-11-10 1:34 ` Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241110013649.34903-8-masahiroy@kernel.org \
--to=masahiroy@kernel.org \
--cc=cocci@inria.fr \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas@fjasle.eu \
--cc=rust-for-linux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.