From: Yixun Lan <dlan@gentoo.org>
To: Troy Mitchell <troymitchell988@gmail.com>
Cc: Andi Shyti <andi.shyti@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-riscv@lists.infradead.org, linux-i2c@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 2/2] i2c: spacemit: add support for SpacemiT K1 SoC
Date: Sun, 24 Nov 2024 23:32:13 +0800 [thread overview]
Message-ID: <20241124153213-GYA3212048@gentoo> (raw)
In-Reply-To: <46a81098-3092-44a0-a625-bd17b4ba0e2b@gmail.com>
Hi Troy:
On 12:11 Thu 21 Nov , Troy Mitchell wrote:
> Hi, Yixun. thanks for ur review.
>
> On 2024/11/14 14:49, Yixun Lan wrote:
> > On 11:07 Tue 12 Nov , Troy Mitchell wrote:
> >> From: Troy Mitchell <troymitchell988@gmail.com>
> >>
> >> This patch introduces basic I2C support for the SpacemiT K1 SoC,
> >> utilizing interrupts for transfers.
> >>
> >> The driver has been tested using i2c-tools on a Bananapi-F3 board,
> >> and basic I2C read/write operations have been confirmed to work.
> >>
> >> Signed-off-by: Troy Mitchell <TroyMitchell988@gmail.com>
> >> ---
> >> drivers/i2c/busses/Kconfig | 19 ++
> >> drivers/i2c/busses/Makefile | 1 +
> >> drivers/i2c/busses/i2c-k1.c | 656 ++++++++++++++++++++++++++++++++++++++++++++
> >> 3 files changed, 676 insertions(+)
> >>
...
> >> +
> >> +static int spacemit_i2c_probe(struct platform_device *pdev)
> >> +{
> >> + struct spacemit_i2c_dev *i2c;
> >> + struct device_node *of_node = pdev->dev.of_node;
> >> + struct clk *clk;
> >> + int ret = 0;
> >> +
> >> + i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
> >> + if (!i2c)
> >> + return -ENOMEM;
> >> +
> >> + i2c->dev = &pdev->dev;
> >> +
> >> + i2c->base = devm_platform_ioremap_resource(pdev, 0);
> >> + if (IS_ERR(i2c->base))
> >> + return dev_err_probe(&pdev->dev, PTR_ERR(i2c->base), "failed to do ioremap");
> >> +
> >> + i2c->irq = platform_get_irq(pdev, 0);
> >> + if (i2c->irq < 0)
> >> + return dev_err_probe(&pdev->dev, i2c->irq, "failed to get irq resource");
> >> +
> >> + ret = devm_request_irq(i2c->dev, i2c->irq, spacemit_i2c_irq_handler,
> >> + IRQF_NO_SUSPEND | IRQF_ONESHOT, dev_name(i2c->dev), i2c);
> >> + if (ret)
> >> + return dev_err_probe(&pdev->dev, ret, "failed to request irq");
> >> +
> >> + disable_irq(i2c->irq);
> >> +
> >> + clk = devm_clk_get_enabled(&pdev->dev, NULL);
> >> + if (IS_ERR(clk))
> >> + return dev_err_probe(&pdev->dev, PTR_ERR(clk), "failed to enable clock");
> >> +
> > I'd suggest also to handle pin request here, since pinctrl driver is merged
> >
> > https://lore.kernel.org/all/CACRpkdYnaJsKKfcdhHeMGTTp86M+wNODzZx2e=OYbxQ4Jc4Rjw@mail.gmail.com/
> sry, I don't understand what pin I need to request?
> >
I was suggesting to add devm_pinctrl_get(), but after checking,
this is not needed anymore since it's already handled by device core,
so no need to change here..
check drivers/core/pinctrl.c -> pinctrl_bind_pins()
> >> + i2c_set_adapdata(&i2c->adapt, i2c);
> >> + i2c->adapt.owner = THIS_MODULE;
> >> + i2c->adapt.algo = &spacemit_i2c_algo;
> >> + i2c->adapt.dev.parent = i2c->dev;
> >> + i2c->adapt.nr = pdev->id;
> >> +
> >> + i2c->adapt.dev.of_node = of_node;
> >> + i2c->adapt.algo_data = i2c;
> >> +
> >> + strscpy(i2c->adapt.name, "spacemit-i2c-adapter", sizeof(i2c->adapt.name));
> >> +
> >> + init_completion(&i2c->complete);
> >> +
> >> + ret = i2c_add_numbered_adapter(&i2c->adapt);
> >> + if (ret)
> >> + return dev_err_probe(&pdev->dev, ret, "failed to add i2c adapter");
> >> +
> >> + platform_set_drvdata(pdev, i2c);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static void spacemit_i2c_remove(struct platform_device *pdev)
> >> +{
> >> + struct spacemit_i2c_dev *i2c = platform_get_drvdata(pdev);
> >> +
> >> + i2c_del_adapter(&i2c->adapt);
> >> +}
> >> +
> >> +static const struct of_device_id spacemit_i2c_of_match[] = {
> >> + { .compatible = "spacemit,k1-i2c", },
> >> + { /* sentinel */ }
> >> +};
> >> +MODULE_DEVICE_TABLE(of, spacemit_i2c_of_match);
> >> +
> >> +static struct platform_driver spacemit_i2c_driver = {
> >> + .probe = spacemit_i2c_probe,
> >> + .remove = spacemit_i2c_remove,
> >> + .driver = {
> >> + .name = "i2c-k1",
> >> + .of_match_table = spacemit_i2c_of_match,
> >> + },
> >> +};
> >> +module_platform_driver(spacemit_i2c_driver);
> >> +
> >> +MODULE_LICENSE("GPL");
> >> +MODULE_DESCRIPTION("I2C bus driver for SpacemiT K1 SoC");
> >>
> >> --
> >> 2.34.1
> >>
> >
>
> --
> Troy Mitchell
--
Yixun Lan (dlan)
Gentoo Linux Developer
GPG Key ID AABEFD55
WARNING: multiple messages have this Message-ID (diff)
From: Yixun Lan <dlan@gentoo.org>
To: Troy Mitchell <troymitchell988@gmail.com>
Cc: Andi Shyti <andi.shyti@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-riscv@lists.infradead.org, linux-i2c@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 2/2] i2c: spacemit: add support for SpacemiT K1 SoC
Date: Sun, 24 Nov 2024 23:32:13 +0800 [thread overview]
Message-ID: <20241124153213-GYA3212048@gentoo> (raw)
In-Reply-To: <46a81098-3092-44a0-a625-bd17b4ba0e2b@gmail.com>
Hi Troy:
On 12:11 Thu 21 Nov , Troy Mitchell wrote:
> Hi, Yixun. thanks for ur review.
>
> On 2024/11/14 14:49, Yixun Lan wrote:
> > On 11:07 Tue 12 Nov , Troy Mitchell wrote:
> >> From: Troy Mitchell <troymitchell988@gmail.com>
> >>
> >> This patch introduces basic I2C support for the SpacemiT K1 SoC,
> >> utilizing interrupts for transfers.
> >>
> >> The driver has been tested using i2c-tools on a Bananapi-F3 board,
> >> and basic I2C read/write operations have been confirmed to work.
> >>
> >> Signed-off-by: Troy Mitchell <TroyMitchell988@gmail.com>
> >> ---
> >> drivers/i2c/busses/Kconfig | 19 ++
> >> drivers/i2c/busses/Makefile | 1 +
> >> drivers/i2c/busses/i2c-k1.c | 656 ++++++++++++++++++++++++++++++++++++++++++++
> >> 3 files changed, 676 insertions(+)
> >>
...
> >> +
> >> +static int spacemit_i2c_probe(struct platform_device *pdev)
> >> +{
> >> + struct spacemit_i2c_dev *i2c;
> >> + struct device_node *of_node = pdev->dev.of_node;
> >> + struct clk *clk;
> >> + int ret = 0;
> >> +
> >> + i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
> >> + if (!i2c)
> >> + return -ENOMEM;
> >> +
> >> + i2c->dev = &pdev->dev;
> >> +
> >> + i2c->base = devm_platform_ioremap_resource(pdev, 0);
> >> + if (IS_ERR(i2c->base))
> >> + return dev_err_probe(&pdev->dev, PTR_ERR(i2c->base), "failed to do ioremap");
> >> +
> >> + i2c->irq = platform_get_irq(pdev, 0);
> >> + if (i2c->irq < 0)
> >> + return dev_err_probe(&pdev->dev, i2c->irq, "failed to get irq resource");
> >> +
> >> + ret = devm_request_irq(i2c->dev, i2c->irq, spacemit_i2c_irq_handler,
> >> + IRQF_NO_SUSPEND | IRQF_ONESHOT, dev_name(i2c->dev), i2c);
> >> + if (ret)
> >> + return dev_err_probe(&pdev->dev, ret, "failed to request irq");
> >> +
> >> + disable_irq(i2c->irq);
> >> +
> >> + clk = devm_clk_get_enabled(&pdev->dev, NULL);
> >> + if (IS_ERR(clk))
> >> + return dev_err_probe(&pdev->dev, PTR_ERR(clk), "failed to enable clock");
> >> +
> > I'd suggest also to handle pin request here, since pinctrl driver is merged
> >
> > https://lore.kernel.org/all/CACRpkdYnaJsKKfcdhHeMGTTp86M+wNODzZx2e=OYbxQ4Jc4Rjw@mail.gmail.com/
> sry, I don't understand what pin I need to request?
> >
I was suggesting to add devm_pinctrl_get(), but after checking,
this is not needed anymore since it's already handled by device core,
so no need to change here..
check drivers/core/pinctrl.c -> pinctrl_bind_pins()
> >> + i2c_set_adapdata(&i2c->adapt, i2c);
> >> + i2c->adapt.owner = THIS_MODULE;
> >> + i2c->adapt.algo = &spacemit_i2c_algo;
> >> + i2c->adapt.dev.parent = i2c->dev;
> >> + i2c->adapt.nr = pdev->id;
> >> +
> >> + i2c->adapt.dev.of_node = of_node;
> >> + i2c->adapt.algo_data = i2c;
> >> +
> >> + strscpy(i2c->adapt.name, "spacemit-i2c-adapter", sizeof(i2c->adapt.name));
> >> +
> >> + init_completion(&i2c->complete);
> >> +
> >> + ret = i2c_add_numbered_adapter(&i2c->adapt);
> >> + if (ret)
> >> + return dev_err_probe(&pdev->dev, ret, "failed to add i2c adapter");
> >> +
> >> + platform_set_drvdata(pdev, i2c);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static void spacemit_i2c_remove(struct platform_device *pdev)
> >> +{
> >> + struct spacemit_i2c_dev *i2c = platform_get_drvdata(pdev);
> >> +
> >> + i2c_del_adapter(&i2c->adapt);
> >> +}
> >> +
> >> +static const struct of_device_id spacemit_i2c_of_match[] = {
> >> + { .compatible = "spacemit,k1-i2c", },
> >> + { /* sentinel */ }
> >> +};
> >> +MODULE_DEVICE_TABLE(of, spacemit_i2c_of_match);
> >> +
> >> +static struct platform_driver spacemit_i2c_driver = {
> >> + .probe = spacemit_i2c_probe,
> >> + .remove = spacemit_i2c_remove,
> >> + .driver = {
> >> + .name = "i2c-k1",
> >> + .of_match_table = spacemit_i2c_of_match,
> >> + },
> >> +};
> >> +module_platform_driver(spacemit_i2c_driver);
> >> +
> >> +MODULE_LICENSE("GPL");
> >> +MODULE_DESCRIPTION("I2C bus driver for SpacemiT K1 SoC");
> >>
> >> --
> >> 2.34.1
> >>
> >
>
> --
> Troy Mitchell
--
Yixun Lan (dlan)
Gentoo Linux Developer
GPG Key ID AABEFD55
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2024-11-24 15:32 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-12 3:07 [PATCH v3 0/2] riscv: spacemit: add i2c support to K1 SoC Troy Mitchell
2024-11-12 3:07 ` Troy Mitchell
2024-11-12 3:07 ` [PATCH v3 1/2] dt-bindings: i2c: spacemit: add support for " Troy Mitchell
2024-11-12 3:07 ` Troy Mitchell
2024-11-12 18:03 ` Conor Dooley
2024-11-12 18:03 ` Conor Dooley
2024-11-14 7:06 ` Yixun Lan
2024-11-14 7:06 ` Yixun Lan
2024-11-21 4:12 ` Troy Mitchell
2024-11-21 4:12 ` Troy Mitchell
2024-11-12 3:07 ` [PATCH v3 2/2] i2c: spacemit: add support for SpacemiT " Troy Mitchell
2024-11-12 3:07 ` Troy Mitchell
2024-11-14 6:49 ` Yixun Lan
2024-11-14 6:49 ` Yixun Lan
2024-11-21 4:11 ` Troy Mitchell
2024-11-21 4:11 ` Troy Mitchell
2024-11-24 15:32 ` Yixun Lan [this message]
2024-11-24 15:32 ` Yixun Lan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241124153213-GYA3212048@gentoo \
--to=dlan@gentoo.org \
--cc=andi.shyti@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=robh@kernel.org \
--cc=troymitchell988@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.