From: Heiko Stuebner <heiko@sntech.de>
To: heiko@sntech.de
Cc: quentin.schulz@cherry.de, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
dse@thaumatec.com, Heiko Stuebner <heiko.stuebner@cherry.de>
Subject: [PATCH v2 2/3] arm64: dts: rockchip: add dsi controller nodes on rk3588
Date: Wed, 27 Nov 2024 15:37:18 +0100 [thread overview]
Message-ID: <20241127143719.660658-3-heiko@sntech.de> (raw)
In-Reply-To: <20241127143719.660658-1-heiko@sntech.de>
From: Heiko Stuebner <heiko.stuebner@cherry.de>
The RK3588 comes with two DSI2 controllers based on a new Synopsis IP.
Add the necessary nodes for them.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
---
arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 57 +++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
index 93d031d8821f..52a5f3005d97 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/clock/rockchip,rk3588-cru.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/rk3588-power.h>
#include <dt-bindings/reset/rockchip,rk3588-cru.h>
#include <dt-bindings/phy/phy.h>
@@ -1418,6 +1419,62 @@ i2s9_8ch: i2s@fddfc000 {
status = "disabled";
};
+ dsi0: dsi@fde20000 {
+ compatible = "rockchip,rk3588-mipi-dsi2";
+ reg = <0x0 0xfde20000 0x0 0x10000>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_DSIHOST0>, <&cru CLK_DSIHOST0>;
+ clock-names = "pclk", "sys";
+ resets = <&cru SRST_P_DSIHOST0>;
+ reset-names = "apb";
+ power-domains = <&power RK3588_PD_VOP>;
+ phys = <&mipidcphy0 PHY_TYPE_DPHY>;
+ phy-names = "dcphy";
+ rockchip,grf = <&vop_grf>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dsi0_in: port@0 {
+ reg = <0>;
+ };
+
+ dsi0_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ dsi1: dsi@fde30000 {
+ compatible = "rockchip,rk3588-mipi-dsi2";
+ reg = <0x0 0xfde30000 0x0 0x10000>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_DSIHOST1>, <&cru CLK_DSIHOST1>;
+ clock-names = "pclk", "sys";
+ resets = <&cru SRST_P_DSIHOST1>;
+ reset-names = "apb";
+ power-domains = <&power RK3588_PD_VOP>;
+ phys = <&mipidcphy1 PHY_TYPE_DPHY>;
+ phy-names = "dcphy";
+ rockchip,grf = <&vop_grf>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dsi1_in: port@0 {
+ reg = <0>;
+ };
+
+ dsi1_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
hdmi0: hdmi@fde80000 {
compatible = "rockchip,rk3588-dw-hdmi-qp";
reg = <0x0 0xfde80000 0x0 0x20000>;
--
2.45.2
WARNING: multiple messages have this Message-ID (diff)
From: Heiko Stuebner <heiko@sntech.de>
To: heiko@sntech.de
Cc: quentin.schulz@cherry.de, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
dse@thaumatec.com, Heiko Stuebner <heiko.stuebner@cherry.de>
Subject: [PATCH v2 2/3] arm64: dts: rockchip: add dsi controller nodes on rk3588
Date: Wed, 27 Nov 2024 15:37:18 +0100 [thread overview]
Message-ID: <20241127143719.660658-3-heiko@sntech.de> (raw)
In-Reply-To: <20241127143719.660658-1-heiko@sntech.de>
From: Heiko Stuebner <heiko.stuebner@cherry.de>
The RK3588 comes with two DSI2 controllers based on a new Synopsis IP.
Add the necessary nodes for them.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
---
arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 57 +++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
index 93d031d8821f..52a5f3005d97 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/clock/rockchip,rk3588-cru.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/rk3588-power.h>
#include <dt-bindings/reset/rockchip,rk3588-cru.h>
#include <dt-bindings/phy/phy.h>
@@ -1418,6 +1419,62 @@ i2s9_8ch: i2s@fddfc000 {
status = "disabled";
};
+ dsi0: dsi@fde20000 {
+ compatible = "rockchip,rk3588-mipi-dsi2";
+ reg = <0x0 0xfde20000 0x0 0x10000>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_DSIHOST0>, <&cru CLK_DSIHOST0>;
+ clock-names = "pclk", "sys";
+ resets = <&cru SRST_P_DSIHOST0>;
+ reset-names = "apb";
+ power-domains = <&power RK3588_PD_VOP>;
+ phys = <&mipidcphy0 PHY_TYPE_DPHY>;
+ phy-names = "dcphy";
+ rockchip,grf = <&vop_grf>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dsi0_in: port@0 {
+ reg = <0>;
+ };
+
+ dsi0_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ dsi1: dsi@fde30000 {
+ compatible = "rockchip,rk3588-mipi-dsi2";
+ reg = <0x0 0xfde30000 0x0 0x10000>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_DSIHOST1>, <&cru CLK_DSIHOST1>;
+ clock-names = "pclk", "sys";
+ resets = <&cru SRST_P_DSIHOST1>;
+ reset-names = "apb";
+ power-domains = <&power RK3588_PD_VOP>;
+ phys = <&mipidcphy1 PHY_TYPE_DPHY>;
+ phy-names = "dcphy";
+ rockchip,grf = <&vop_grf>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dsi1_in: port@0 {
+ reg = <0>;
+ };
+
+ dsi1_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
hdmi0: hdmi@fde80000 {
compatible = "rockchip,rk3588-dw-hdmi-qp";
reg = <0x0 0xfde80000 0x0 0x20000>;
--
2.45.2
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2024-11-27 14:40 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-27 14:37 [PATCH v2 0/3] arm64: dts: rockchip: add and enable DSI2 on rk3588 Heiko Stuebner
2024-11-27 14:37 ` Heiko Stuebner
2024-11-27 14:37 ` [PATCH v2 1/3] arm64: dts: rockchip: add mipi dcphy nodes to rk3588 Heiko Stuebner
2024-11-27 14:37 ` Heiko Stuebner
2024-11-27 14:37 ` Heiko Stuebner [this message]
2024-11-27 14:37 ` [PATCH v2 2/3] arm64: dts: rockchip: add dsi controller nodes on rk3588 Heiko Stuebner
2024-11-27 14:37 ` [PATCH v2 3/3] arm64: dts: rockchip: add overlay for tiger-haikou video-demo adapter Heiko Stuebner
2024-11-27 14:37 ` Heiko Stuebner
2025-02-03 16:58 ` Quentin Schulz
2025-02-03 16:58 ` Quentin Schulz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241127143719.660658-3-heiko@sntech.de \
--to=heiko@sntech.de \
--cc=devicetree@vger.kernel.org \
--cc=dse@thaumatec.com \
--cc=heiko.stuebner@cherry.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=quentin.schulz@cherry.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.