* [PATCH v4] arm64: dts: mt7986: add overlay for SATA power socket on BPI-R3
@ 2024-12-06 13:23 ` Frank Wunderlich
0 siblings, 0 replies; 4+ messages in thread
From: Frank Wunderlich @ 2024-12-06 13:23 UTC (permalink / raw)
To: Matthias Brugger, AngeloGioacchino Del Regno, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: Frank Wunderlich, linux-kernel, linux-arm-kernel, linux-mediatek,
devicetree
From: Frank Wunderlich <frank-w@public-files.de>
Bananapi R3 has a Power socket entended for using external SATA drives.
This Socket is off by default but can be switched with gpio 8.
Add an overlay to activate it.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v4:
- rebased on 6.13-rc1 without the full-dtb patch
v3:
- make sata overlay better readable
v2:
- rebase on the patch "add dtbs with applied overlays for bpi-r3"
- add sata-overlay to the full dtbs
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
.../mt7986a-bananapi-bpi-r3-sata.dtso | 35 +++++++++++++++++++
2 files changed, 36 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sata.dtso
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 8fd7b2bb7a15..d844c4ce9863 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -17,6 +17,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-mini.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sata.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sata.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sata.dtso
new file mode 100644
index 000000000000..17659545470e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sata.dtso
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+ compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+ reg_sata12v: regulator-sata12v {
+ compatible = "regulator-fixed";
+ regulator-name = "sata12v";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&pio 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_sata5v: regulator-sata5v {
+ compatible = "regulator-fixed";
+ regulator-name = "sata5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <®_sata12v>;
+ };
+
+};
+
--
2.43.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v4] arm64: dts: mt7986: add overlay for SATA power socket on BPI-R3
@ 2024-12-06 13:23 ` Frank Wunderlich
0 siblings, 0 replies; 4+ messages in thread
From: Frank Wunderlich @ 2024-12-06 13:23 UTC (permalink / raw)
To: Matthias Brugger, AngeloGioacchino Del Regno, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: devicetree, linux-mediatek, linux-kernel, linux-arm-kernel
From: Frank Wunderlich <frank-w@public-files.de>
Bananapi R3 has a Power socket entended for using external SATA drives.
This Socket is off by default but can be switched with gpio 8.
Add an overlay to activate it.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v4:
- rebased on 6.13-rc1 without the full-dtb patch
v3:
- make sata overlay better readable
v2:
- rebase on the patch "add dtbs with applied overlays for bpi-r3"
- add sata-overlay to the full dtbs
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
.../mt7986a-bananapi-bpi-r3-sata.dtso | 35 +++++++++++++++++++
2 files changed, 36 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sata.dtso
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 8fd7b2bb7a15..d844c4ce9863 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -17,6 +17,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-mini.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sata.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sata.dtso b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sata.dtso
new file mode 100644
index 000000000000..17659545470e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sata.dtso
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+ compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+ reg_sata12v: regulator-sata12v {
+ compatible = "regulator-fixed";
+ regulator-name = "sata12v";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&pio 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_sata5v: regulator-sata5v {
+ compatible = "regulator-fixed";
+ regulator-name = "sata5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <®_sata12v>;
+ };
+
+};
+
--
2.43.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH v4] arm64: dts: mt7986: add overlay for SATA power socket on BPI-R3
2024-12-06 13:23 ` Frank Wunderlich
@ 2024-12-19 11:51 ` AngeloGioacchino Del Regno
-1 siblings, 0 replies; 4+ messages in thread
From: AngeloGioacchino Del Regno @ 2024-12-19 11:51 UTC (permalink / raw)
To: Matthias Brugger, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Frank Wunderlich
Cc: Frank Wunderlich, linux-kernel, linux-arm-kernel, linux-mediatek,
devicetree
On Fri, 06 Dec 2024 14:23:59 +0100, Frank Wunderlich wrote:
> Bananapi R3 has a Power socket entended for using external SATA drives.
> This Socket is off by default but can be switched with gpio 8.
>
> Add an overlay to activate it.
>
>
Applied to v6.13-next/dts64, thanks!
[1/1] arm64: dts: mt7986: add overlay for SATA power socket on BPI-R3
commit: 312189ebb802a0242639a9c628cfdc6e532d8e11
Cheers,
Angelo
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v4] arm64: dts: mt7986: add overlay for SATA power socket on BPI-R3
@ 2024-12-19 11:51 ` AngeloGioacchino Del Regno
0 siblings, 0 replies; 4+ messages in thread
From: AngeloGioacchino Del Regno @ 2024-12-19 11:51 UTC (permalink / raw)
To: Matthias Brugger, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Frank Wunderlich
Cc: devicetree, linux-mediatek, linux-kernel, linux-arm-kernel
On Fri, 06 Dec 2024 14:23:59 +0100, Frank Wunderlich wrote:
> Bananapi R3 has a Power socket entended for using external SATA drives.
> This Socket is off by default but can be switched with gpio 8.
>
> Add an overlay to activate it.
>
>
Applied to v6.13-next/dts64, thanks!
[1/1] arm64: dts: mt7986: add overlay for SATA power socket on BPI-R3
commit: 312189ebb802a0242639a9c628cfdc6e532d8e11
Cheers,
Angelo
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2024-12-19 11:52 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-12-06 13:23 [PATCH v4] arm64: dts: mt7986: add overlay for SATA power socket on BPI-R3 Frank Wunderlich
2024-12-06 13:23 ` Frank Wunderlich
2024-12-19 11:51 ` AngeloGioacchino Del Regno
2024-12-19 11:51 ` AngeloGioacchino Del Regno
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.