From: Gao Xiang <hsiangkao@linux.alibaba.com>
To: linux-erofs@lists.ozlabs.org
Cc: Derek McGowan <derek@mcg.dev>,
Gao Xiang <hsiangkao@linux.alibaba.com>,
LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 4/4] erofs: use buffered I/O for file-backed mounts by default
Date: Thu, 12 Dec 2024 21:43:36 +0800 [thread overview]
Message-ID: <20241212134336.2059899-1-hsiangkao@linux.alibaba.com> (raw)
In-Reply-To: <20241212133504.2047178-4-hsiangkao@linux.alibaba.com>
For many use cases (e.g. container images are just fetched from remote),
performance will be impacted if underlay page cache is up-to-date but
direct i/o flushes dirty pages first.
Instead, let's use buffered I/O by default to keep in sync with loop
devices and add a (re)mount option to explicitly enable direct I/O
if supported by the underlying files.
The container startup time is improved as below:
unpack 1st run non-1st runs
EROFS snapshotter buffered I/O file 4.586404265s 0.308s 0.198s
EROFS snapshotter direct I/O file 4.581742849s 2.238s 0.222s
EROFS snapshotter loop 4.596023152s 0.346s 0.201s
Overlayfs snapshotter 5.382851037s 0.206s 0.214s
Fixes: fb176750266a ("erofs: add file-backed mount support")
Cc: Derek McGowan <derek@mcg.dev>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
---
v1: https://lore.kernel.org/r/20241212133504.2047178-4-hsiangkao@linux.alibaba.com
changes since v1 (obsoleted version by mistake):
- refine commit message;
- add `directio` in erofs_show_options() too.
fs/erofs/fileio.c | 7 +++++--
fs/erofs/internal.h | 1 +
fs/erofs/super.c | 23 +++++++++++++++--------
3 files changed, 21 insertions(+), 10 deletions(-)
diff --git a/fs/erofs/fileio.c b/fs/erofs/fileio.c
index a61b8faec651..33f8539dda4a 100644
--- a/fs/erofs/fileio.c
+++ b/fs/erofs/fileio.c
@@ -9,6 +9,7 @@ struct erofs_fileio_rq {
struct bio_vec bvecs[BIO_MAX_VECS];
struct bio bio;
struct kiocb iocb;
+ struct super_block *sb;
};
struct erofs_fileio {
@@ -52,8 +53,9 @@ static void erofs_fileio_rq_submit(struct erofs_fileio_rq *rq)
rq->iocb.ki_pos = rq->bio.bi_iter.bi_sector << SECTOR_SHIFT;
rq->iocb.ki_ioprio = get_current_ioprio();
rq->iocb.ki_complete = erofs_fileio_ki_complete;
- rq->iocb.ki_flags = (rq->iocb.ki_filp->f_mode & FMODE_CAN_ODIRECT) ?
- IOCB_DIRECT : 0;
+ if (test_opt(&EROFS_SB(rq->sb)->opt, DIRECT_IO) &&
+ rq->iocb.ki_filp->f_mode & FMODE_CAN_ODIRECT)
+ rq->iocb.ki_flags = IOCB_DIRECT;
iov_iter_bvec(&iter, ITER_DEST, rq->bvecs, rq->bio.bi_vcnt,
rq->bio.bi_iter.bi_size);
ret = vfs_iocb_iter_read(rq->iocb.ki_filp, &rq->iocb, &iter);
@@ -68,6 +70,7 @@ static struct erofs_fileio_rq *erofs_fileio_rq_alloc(struct erofs_map_dev *mdev)
bio_init(&rq->bio, NULL, rq->bvecs, BIO_MAX_VECS, REQ_OP_READ);
rq->iocb.ki_filp = mdev->m_dif->file;
+ rq->sb = mdev->m_sb;
return rq;
}
diff --git a/fs/erofs/internal.h b/fs/erofs/internal.h
index 59e7739b7c3b..bc46000ccc6b 100644
--- a/fs/erofs/internal.h
+++ b/fs/erofs/internal.h
@@ -177,6 +177,7 @@ struct erofs_sb_info {
#define EROFS_MOUNT_POSIX_ACL 0x00000020
#define EROFS_MOUNT_DAX_ALWAYS 0x00000040
#define EROFS_MOUNT_DAX_NEVER 0x00000080
+#define EROFS_MOUNT_DIRECT_IO 0x00000100
#define clear_opt(opt, option) ((opt)->mount_opt &= ~EROFS_MOUNT_##option)
#define set_opt(opt, option) ((opt)->mount_opt |= EROFS_MOUNT_##option)
diff --git a/fs/erofs/super.c b/fs/erofs/super.c
index 9044907354e1..f5956474bfde 100644
--- a/fs/erofs/super.c
+++ b/fs/erofs/super.c
@@ -364,14 +364,8 @@ static void erofs_default_options(struct erofs_sb_info *sbi)
}
enum {
- Opt_user_xattr,
- Opt_acl,
- Opt_cache_strategy,
- Opt_dax,
- Opt_dax_enum,
- Opt_device,
- Opt_fsid,
- Opt_domain_id,
+ Opt_user_xattr, Opt_acl, Opt_cache_strategy, Opt_dax, Opt_dax_enum,
+ Opt_device, Opt_fsid, Opt_domain_id, Opt_directio,
Opt_err
};
@@ -398,6 +392,7 @@ static const struct fs_parameter_spec erofs_fs_parameters[] = {
fsparam_string("device", Opt_device),
fsparam_string("fsid", Opt_fsid),
fsparam_string("domain_id", Opt_domain_id),
+ fsparam_flag_no("directio", Opt_directio),
{}
};
@@ -511,6 +506,16 @@ static int erofs_fc_parse_param(struct fs_context *fc,
errorfc(fc, "%s option not supported", erofs_fs_parameters[opt].name);
break;
#endif
+ case Opt_directio:
+#ifdef CONFIG_EROFS_FS_BACKED_BY_FILE
+ if (result.boolean)
+ set_opt(&sbi->opt, DIRECT_IO);
+ else
+ clear_opt(&sbi->opt, DIRECT_IO);
+#else
+ errorfc(fc, "%s option not supported", erofs_fs_parameters[opt].name);
+#endif
+ break;
default:
return -ENOPARAM;
}
@@ -948,6 +953,8 @@ static int erofs_show_options(struct seq_file *seq, struct dentry *root)
seq_puts(seq, ",dax=always");
if (test_opt(opt, DAX_NEVER))
seq_puts(seq, ",dax=never");
+ if (erofs_is_fileio_mode(sbi) && test_opt(opt, DIRECT_IO))
+ seq_puts(seq, ",directio");
#ifdef CONFIG_EROFS_FS_ONDEMAND
if (sbi->fsid)
seq_printf(seq, ",fsid=%s", sbi->fsid);
--
2.43.5
WARNING: multiple messages have this Message-ID (diff)
From: Gao Xiang <hsiangkao@linux.alibaba.com>
To: linux-erofs@lists.ozlabs.org
Cc: LKML <linux-kernel@vger.kernel.org>,
Gao Xiang <hsiangkao@linux.alibaba.com>,
Derek McGowan <derek@mcg.dev>
Subject: [PATCH v2 4/4] erofs: use buffered I/O for file-backed mounts by default
Date: Thu, 12 Dec 2024 21:43:36 +0800 [thread overview]
Message-ID: <20241212134336.2059899-1-hsiangkao@linux.alibaba.com> (raw)
In-Reply-To: <20241212133504.2047178-4-hsiangkao@linux.alibaba.com>
For many use cases (e.g. container images are just fetched from remote),
performance will be impacted if underlay page cache is up-to-date but
direct i/o flushes dirty pages first.
Instead, let's use buffered I/O by default to keep in sync with loop
devices and add a (re)mount option to explicitly enable direct I/O
if supported by the underlying files.
The container startup time is improved as below:
unpack 1st run non-1st runs
EROFS snapshotter buffered I/O file 4.586404265s 0.308s 0.198s
EROFS snapshotter direct I/O file 4.581742849s 2.238s 0.222s
EROFS snapshotter loop 4.596023152s 0.346s 0.201s
Overlayfs snapshotter 5.382851037s 0.206s 0.214s
Fixes: fb176750266a ("erofs: add file-backed mount support")
Cc: Derek McGowan <derek@mcg.dev>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
---
v1: https://lore.kernel.org/r/20241212133504.2047178-4-hsiangkao@linux.alibaba.com
changes since v1 (obsoleted version by mistake):
- refine commit message;
- add `directio` in erofs_show_options() too.
fs/erofs/fileio.c | 7 +++++--
fs/erofs/internal.h | 1 +
fs/erofs/super.c | 23 +++++++++++++++--------
3 files changed, 21 insertions(+), 10 deletions(-)
diff --git a/fs/erofs/fileio.c b/fs/erofs/fileio.c
index a61b8faec651..33f8539dda4a 100644
--- a/fs/erofs/fileio.c
+++ b/fs/erofs/fileio.c
@@ -9,6 +9,7 @@ struct erofs_fileio_rq {
struct bio_vec bvecs[BIO_MAX_VECS];
struct bio bio;
struct kiocb iocb;
+ struct super_block *sb;
};
struct erofs_fileio {
@@ -52,8 +53,9 @@ static void erofs_fileio_rq_submit(struct erofs_fileio_rq *rq)
rq->iocb.ki_pos = rq->bio.bi_iter.bi_sector << SECTOR_SHIFT;
rq->iocb.ki_ioprio = get_current_ioprio();
rq->iocb.ki_complete = erofs_fileio_ki_complete;
- rq->iocb.ki_flags = (rq->iocb.ki_filp->f_mode & FMODE_CAN_ODIRECT) ?
- IOCB_DIRECT : 0;
+ if (test_opt(&EROFS_SB(rq->sb)->opt, DIRECT_IO) &&
+ rq->iocb.ki_filp->f_mode & FMODE_CAN_ODIRECT)
+ rq->iocb.ki_flags = IOCB_DIRECT;
iov_iter_bvec(&iter, ITER_DEST, rq->bvecs, rq->bio.bi_vcnt,
rq->bio.bi_iter.bi_size);
ret = vfs_iocb_iter_read(rq->iocb.ki_filp, &rq->iocb, &iter);
@@ -68,6 +70,7 @@ static struct erofs_fileio_rq *erofs_fileio_rq_alloc(struct erofs_map_dev *mdev)
bio_init(&rq->bio, NULL, rq->bvecs, BIO_MAX_VECS, REQ_OP_READ);
rq->iocb.ki_filp = mdev->m_dif->file;
+ rq->sb = mdev->m_sb;
return rq;
}
diff --git a/fs/erofs/internal.h b/fs/erofs/internal.h
index 59e7739b7c3b..bc46000ccc6b 100644
--- a/fs/erofs/internal.h
+++ b/fs/erofs/internal.h
@@ -177,6 +177,7 @@ struct erofs_sb_info {
#define EROFS_MOUNT_POSIX_ACL 0x00000020
#define EROFS_MOUNT_DAX_ALWAYS 0x00000040
#define EROFS_MOUNT_DAX_NEVER 0x00000080
+#define EROFS_MOUNT_DIRECT_IO 0x00000100
#define clear_opt(opt, option) ((opt)->mount_opt &= ~EROFS_MOUNT_##option)
#define set_opt(opt, option) ((opt)->mount_opt |= EROFS_MOUNT_##option)
diff --git a/fs/erofs/super.c b/fs/erofs/super.c
index 9044907354e1..f5956474bfde 100644
--- a/fs/erofs/super.c
+++ b/fs/erofs/super.c
@@ -364,14 +364,8 @@ static void erofs_default_options(struct erofs_sb_info *sbi)
}
enum {
- Opt_user_xattr,
- Opt_acl,
- Opt_cache_strategy,
- Opt_dax,
- Opt_dax_enum,
- Opt_device,
- Opt_fsid,
- Opt_domain_id,
+ Opt_user_xattr, Opt_acl, Opt_cache_strategy, Opt_dax, Opt_dax_enum,
+ Opt_device, Opt_fsid, Opt_domain_id, Opt_directio,
Opt_err
};
@@ -398,6 +392,7 @@ static const struct fs_parameter_spec erofs_fs_parameters[] = {
fsparam_string("device", Opt_device),
fsparam_string("fsid", Opt_fsid),
fsparam_string("domain_id", Opt_domain_id),
+ fsparam_flag_no("directio", Opt_directio),
{}
};
@@ -511,6 +506,16 @@ static int erofs_fc_parse_param(struct fs_context *fc,
errorfc(fc, "%s option not supported", erofs_fs_parameters[opt].name);
break;
#endif
+ case Opt_directio:
+#ifdef CONFIG_EROFS_FS_BACKED_BY_FILE
+ if (result.boolean)
+ set_opt(&sbi->opt, DIRECT_IO);
+ else
+ clear_opt(&sbi->opt, DIRECT_IO);
+#else
+ errorfc(fc, "%s option not supported", erofs_fs_parameters[opt].name);
+#endif
+ break;
default:
return -ENOPARAM;
}
@@ -948,6 +953,8 @@ static int erofs_show_options(struct seq_file *seq, struct dentry *root)
seq_puts(seq, ",dax=always");
if (test_opt(opt, DAX_NEVER))
seq_puts(seq, ",dax=never");
+ if (erofs_is_fileio_mode(sbi) && test_opt(opt, DIRECT_IO))
+ seq_puts(seq, ",directio");
#ifdef CONFIG_EROFS_FS_ONDEMAND
if (sbi->fsid)
seq_printf(seq, ",fsid=%s", sbi->fsid);
--
2.43.5
next prev parent reply other threads:[~2024-12-12 13:43 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-12 13:35 [PATCH 1/4] erofs: add erofs_sb_free() helper Gao Xiang
2024-12-12 13:35 ` Gao Xiang
2024-12-12 13:35 ` [PATCH 2/4] erofs: use `struct erofs_device_info` for the primary device Gao Xiang
2024-12-12 13:35 ` Gao Xiang
2024-12-12 14:37 ` Chao Yu via Linux-erofs
2024-12-12 14:37 ` Chao Yu
2024-12-12 13:35 ` [PATCH 3/4] erofs: reference `struct erofs_device_info` for erofs_map_dev Gao Xiang
2024-12-12 13:35 ` Gao Xiang
2024-12-12 14:42 ` Chao Yu via Linux-erofs
2024-12-12 14:42 ` Chao Yu
2024-12-12 23:54 ` [PATCH v2 " Gao Xiang
2024-12-12 23:54 ` Gao Xiang
2024-12-14 6:33 ` [PATCH " kernel test robot
2024-12-12 13:35 ` [PATCH 4/4] erofs: use buffered I/O for file-backed mounts by default Gao Xiang
2024-12-12 13:35 ` Gao Xiang
2024-12-12 13:43 ` Gao Xiang [this message]
2024-12-12 13:43 ` [PATCH v2 " Gao Xiang
2024-12-12 14:46 ` Chao Yu via Linux-erofs
2024-12-12 14:46 ` Chao Yu
2024-12-12 14:29 ` [PATCH 1/4] erofs: add erofs_sb_free() helper Chao Yu via Linux-erofs
2024-12-12 14:29 ` Chao Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241212134336.2059899-1-hsiangkao@linux.alibaba.com \
--to=hsiangkao@linux.alibaba.com \
--cc=derek@mcg.dev \
--cc=linux-erofs@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.