Re: [PATCH v9 0/9] Drivers to support the MCU on QNAP NAS devices

[Lee Jones <lee@kernel.org>]

On Thu, 12 Dec 2024, Lee Jones wrote:

> On Thu, 07 Nov 2024 12:47:03 +0100, Heiko Stuebner wrote:
> > This implements a set of drivers for the MCU used on QNAP NAS devices.
> > 
> > Of course no documentation for the serial protocol is available, so
> > thankfully QNAP has a tool on their rescue-inird to talk to the MCU and
> > I found interceptty [0] to listen to what goes over the serial connection.
> > 
> > In general it looks like there are two different generations in general,
> > an "EC" device and now this "MCU" - referenced in the strings of the
> > userspace handlers for those devices.
> > 
> > [...]
> 
> Applied, thanks!
> 
> [1/9] HID: hid-sensor-hub: don't use stale platform-data on remove
>       commit: e079a120f31e3f9c00180aa13c1df18cc138f7fe
> [2/9] mfd: core: make platform_data pointer const in struct mfd_cell
>       commit: 8f4009ad901c44f0428dbde654c4dd1fb29c863b
> [3/9] dt-bindings: mfd: add binding for qnap,ts433-mcu devices
>       commit: 8877bcff3e3b4f08a1fc0232dbfdaeda085cfdf3
> [4/9] mfd: add base driver for qnap-mcu devices
>       commit: 944ca826f69e4723853b3876875b03aeafe67b60
> [5/9] leds: add driver for LEDs from qnap-mcu devices
>       commit: fe6a21ee38f12e3e5f9adbd2f9a840be105b943f
> [6/9] Input: add driver for the input part of qnap-mcu devices
>       commit: 4b27e0da257371d3d141fae38fdbdc3c3a67bce6
> [7/9] hwmon: add driver for the hwmon parts of qnap-mcu devices
>       commit: 41755872a8a8ab8d1644459d9634c53b743fe2be

Once build testing is complete, I'll send out a PR.

Note to self: ib-mfd-hid-hwmon-input-leds-6.14

-- 
Lee Jones [李琼斯]