From: Anup Patel <apatel@ventanamicro.com>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jassi Brar <jassisinghbrar@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Sunil V L <sunilvl@ventanamicro.com>,
Rahul Pathak <rpathak@ventanamicro.com>,
Leyfoon Tan <leyfoon.tan@starfivetech.com>,
Atish Patra <atishp@atishpatra.org>,
Andrew Jones <ajones@ventanamicro.com>,
Anup Patel <anup@brainfault.org>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
Anup Patel <apatel@ventanamicro.com>
Subject: [RFC PATCH 5/8] mailbox: Add common header for RPMI messages sent via mailbox
Date: Mon, 16 Dec 2024 14:18:14 +0530 [thread overview]
Message-ID: <20241216084817.373131-6-apatel@ventanamicro.com> (raw)
In-Reply-To: <20241216084817.373131-1-apatel@ventanamicro.com>
The RPMI based mailbox controller drivers and mailbox cliens need to
share defines related to RPMI messages over mailbox interface so add
a common header for this purpose.
Co-developed-by: Rahul Pathak <rpathak@ventanamicro.com>
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
include/linux/mailbox/riscv-rpmi-message.h | 202 +++++++++++++++++++++
1 file changed, 202 insertions(+)
create mode 100644 include/linux/mailbox/riscv-rpmi-message.h
diff --git a/include/linux/mailbox/riscv-rpmi-message.h b/include/linux/mailbox/riscv-rpmi-message.h
new file mode 100644
index 000000000000..8f4b3a0edbce
--- /dev/null
+++ b/include/linux/mailbox/riscv-rpmi-message.h
@@ -0,0 +1,202 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2024 Ventana Micro Systems Inc.
+ */
+
+#ifndef _LINUX_RISCV_RPMI_MESSAGE_H_
+#define _LINUX_RISCV_RPMI_MESSAGE_H_
+
+#include <linux/mailbox_client.h>
+
+/** RPMI version encode/decode macros */
+#define RPMI_VER_MAJOR(__ver) (((__ver) >> 16) & 0xffff)
+#define RPMI_VER_MINOR(__ver) ((__ver) & 0xffff)
+#define RPMI_MKVER(__maj, __min) (((__maj) << 16) | (__min))
+
+/** RPMI message header */
+struct rpmi_message_header {
+ __le16 servicegroup_id;
+ u8 service_id;
+ u8 flags;
+ __le16 datalen;
+ __le16 token;
+};
+
+/** RPMI message */
+struct rpmi_message {
+ struct rpmi_message_header header;
+ u8 data[];
+};
+
+/** RPMI notification event */
+struct rpmi_notification_event {
+ __le16 event_datalen;
+ u8 event_id;
+ u8 reserved;
+ u8 event_data[];
+};
+
+/** RPMI error codes */
+enum rpmi_error_codes {
+ RPMI_SUCCESS = 0,
+ RPMI_ERR_FAILED = -1,
+ RPMI_ERR_NOTSUPP = -2,
+ RPMI_ERR_INVALID_PARAM = -3,
+ RPMI_ERR_DENIED = -4,
+ RPMI_ERR_INVALID_ADDR = -5,
+ RPMI_ERR_ALREADY = -6,
+ RPMI_ERR_EXTENSION = -7,
+ RPMI_ERR_HW_FAULT = -8,
+ RPMI_ERR_BUSY = -9,
+ RPMI_ERR_INVALID_STATE = -10,
+ RPMI_ERR_BAD_RANGE = -11,
+ RPMI_ERR_TIMEOUT = -12,
+ RPMI_ERR_IO = -13,
+ RPMI_ERR_NO_DATA = -14,
+ RPMI_ERR_RESERVED_START = -15,
+ RPMI_ERR_RESERVED_END = -127,
+ RPMI_ERR_VENDOR_START = -128,
+};
+
+static inline int rpmi_to_linux_error(int rpmi_error)
+{
+ switch (rpmi_error) {
+ case RPMI_SUCCESS:
+ return 0;
+ case RPMI_ERR_INVALID_PARAM:
+ case RPMI_ERR_BAD_RANGE:
+ case RPMI_ERR_INVALID_STATE:
+ return -EINVAL;
+ case RPMI_ERR_DENIED:
+ return -EPERM;
+ case RPMI_ERR_INVALID_ADDR:
+ case RPMI_ERR_HW_FAULT:
+ return -EFAULT;
+ case RPMI_ERR_ALREADY:
+ return -EALREADY;
+ case RPMI_ERR_BUSY:
+ return -EBUSY;
+ case RPMI_ERR_TIMEOUT:
+ return -ETIMEDOUT;
+ case RPMI_ERR_IO:
+ return -ECOMM;
+ case RPMI_ERR_FAILED:
+ case RPMI_ERR_NOTSUPP:
+ case RPMI_ERR_NO_DATA:
+ case RPMI_ERR_EXTENSION:
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/** RPMI linux mailbox attribute IDs */
+enum rpmi_mbox_attribute_id {
+ RPMI_MBOX_ATTR_SPEC_VERSION = 0,
+ RPMI_MBOX_ATTR_MAX_MSG_DATA_SIZE,
+ RPMI_MBOX_ATTR_SERVICEGROUP_ID,
+ RPMI_MBOX_ATTR_SERVICEGROUP_VERSION,
+ RPMI_MBOX_ATTR_MAX_ID,
+};
+
+/** RPMI linux mailbox message types */
+enum rpmi_mbox_message_type {
+ RPMI_MBOX_MSG_TYPE_GET_ATTRIBUTE = 0,
+ RPMI_MBOX_MSG_TYPE_SET_ATTRIBUTE,
+ RPMI_MBOX_MSG_TYPE_SEND_WITH_RESPONSE,
+ RPMI_MBOX_MSG_TYPE_SEND_WITHOUT_RESPONSE,
+ RPMI_MBOX_MSG_TYPE_NOTIFICATION_EVENT,
+ RPMI_MBOX_MSG_MAX_TYPE,
+};
+
+/** RPMI linux mailbox message instance */
+struct rpmi_mbox_message {
+ enum rpmi_mbox_message_type type;
+ union {
+ struct {
+ enum rpmi_mbox_attribute_id id;
+ u32 value;
+ } attr;
+
+ struct {
+ u32 service_id;
+ void *request;
+ unsigned long request_len;
+ void *response;
+ unsigned long max_response_len;
+ unsigned long out_response_len;
+ } data;
+
+ struct rpmi_notification_event *notif_event;
+ };
+ int error;
+};
+
+/** RPMI linux mailbox message helper routines */
+static inline void rpmi_mbox_init_get_attribute(struct rpmi_mbox_message *msg,
+ enum rpmi_mbox_attribute_id id)
+{
+ msg->type = RPMI_MBOX_MSG_TYPE_GET_ATTRIBUTE;
+ msg->attr.id = id;
+ msg->attr.value = 0;
+ msg->error = 0;
+}
+
+static inline void rpmi_mbox_init_set_attribute(struct rpmi_mbox_message *msg,
+ enum rpmi_mbox_attribute_id id,
+ u32 value)
+{
+ msg->type = RPMI_MBOX_MSG_TYPE_SET_ATTRIBUTE;
+ msg->attr.id = id;
+ msg->attr.value = value;
+ msg->error = 0;
+}
+
+static inline void rpmi_mbox_init_send_with_response(struct rpmi_mbox_message *msg,
+ u32 service_id,
+ void *request,
+ unsigned long request_len,
+ void *response,
+ unsigned long max_response_len)
+{
+ msg->type = RPMI_MBOX_MSG_TYPE_SEND_WITH_RESPONSE;
+ msg->data.service_id = service_id;
+ msg->data.request = request;
+ msg->data.request_len = request_len;
+ msg->data.response = response;
+ msg->data.max_response_len = max_response_len;
+ msg->data.out_response_len = 0;
+ msg->error = 0;
+}
+
+static inline void rpmi_mbox_init_send_without_response(struct rpmi_mbox_message *msg,
+ u32 service_id,
+ void *request,
+ unsigned long request_len)
+{
+ msg->type = RPMI_MBOX_MSG_TYPE_SEND_WITHOUT_RESPONSE;
+ msg->data.service_id = service_id;
+ msg->data.request = request;
+ msg->data.request_len = request_len;
+ msg->data.response = NULL;
+ msg->data.max_response_len = 0;
+ msg->data.out_response_len = 0;
+ msg->error = 0;
+}
+
+static inline int rpmi_mbox_send_message(struct mbox_chan *chan,
+ struct rpmi_mbox_message *msg)
+{
+ int ret;
+
+ /* Send message for the underlying mailbox channel */
+ ret = mbox_send_message(chan, msg);
+ if (ret < 0)
+ return ret;
+
+ /* Explicitly signal txdone for mailbox channel */
+ ret = msg->error;
+ mbox_client_txdone(chan, ret);
+ return ret;
+}
+
+#endif /* _LINUX_RISCV_RPMI_MESSAGE_H_ */
--
2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: Anup Patel <apatel@ventanamicro.com>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jassi Brar <jassisinghbrar@gmail.com>
Cc: Anup Patel <apatel@ventanamicro.com>,
devicetree@vger.kernel.org,
Leyfoon Tan <leyfoon.tan@starfivetech.com>,
Anup Patel <anup@brainfault.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
linux-kernel@vger.kernel.org, Palmer Dabbelt <palmer@dabbelt.com>,
Atish Patra <atishp@atishpatra.org>,
linux-riscv@lists.infradead.org,
Andrew Jones <ajones@ventanamicro.com>,
linux-clk@vger.kernel.org,
Rahul Pathak <rpathak@ventanamicro.com>
Subject: [RFC PATCH 5/8] mailbox: Add common header for RPMI messages sent via mailbox
Date: Mon, 16 Dec 2024 14:18:14 +0530 [thread overview]
Message-ID: <20241216084817.373131-6-apatel@ventanamicro.com> (raw)
In-Reply-To: <20241216084817.373131-1-apatel@ventanamicro.com>
The RPMI based mailbox controller drivers and mailbox cliens need to
share defines related to RPMI messages over mailbox interface so add
a common header for this purpose.
Co-developed-by: Rahul Pathak <rpathak@ventanamicro.com>
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
include/linux/mailbox/riscv-rpmi-message.h | 202 +++++++++++++++++++++
1 file changed, 202 insertions(+)
create mode 100644 include/linux/mailbox/riscv-rpmi-message.h
diff --git a/include/linux/mailbox/riscv-rpmi-message.h b/include/linux/mailbox/riscv-rpmi-message.h
new file mode 100644
index 000000000000..8f4b3a0edbce
--- /dev/null
+++ b/include/linux/mailbox/riscv-rpmi-message.h
@@ -0,0 +1,202 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2024 Ventana Micro Systems Inc.
+ */
+
+#ifndef _LINUX_RISCV_RPMI_MESSAGE_H_
+#define _LINUX_RISCV_RPMI_MESSAGE_H_
+
+#include <linux/mailbox_client.h>
+
+/** RPMI version encode/decode macros */
+#define RPMI_VER_MAJOR(__ver) (((__ver) >> 16) & 0xffff)
+#define RPMI_VER_MINOR(__ver) ((__ver) & 0xffff)
+#define RPMI_MKVER(__maj, __min) (((__maj) << 16) | (__min))
+
+/** RPMI message header */
+struct rpmi_message_header {
+ __le16 servicegroup_id;
+ u8 service_id;
+ u8 flags;
+ __le16 datalen;
+ __le16 token;
+};
+
+/** RPMI message */
+struct rpmi_message {
+ struct rpmi_message_header header;
+ u8 data[];
+};
+
+/** RPMI notification event */
+struct rpmi_notification_event {
+ __le16 event_datalen;
+ u8 event_id;
+ u8 reserved;
+ u8 event_data[];
+};
+
+/** RPMI error codes */
+enum rpmi_error_codes {
+ RPMI_SUCCESS = 0,
+ RPMI_ERR_FAILED = -1,
+ RPMI_ERR_NOTSUPP = -2,
+ RPMI_ERR_INVALID_PARAM = -3,
+ RPMI_ERR_DENIED = -4,
+ RPMI_ERR_INVALID_ADDR = -5,
+ RPMI_ERR_ALREADY = -6,
+ RPMI_ERR_EXTENSION = -7,
+ RPMI_ERR_HW_FAULT = -8,
+ RPMI_ERR_BUSY = -9,
+ RPMI_ERR_INVALID_STATE = -10,
+ RPMI_ERR_BAD_RANGE = -11,
+ RPMI_ERR_TIMEOUT = -12,
+ RPMI_ERR_IO = -13,
+ RPMI_ERR_NO_DATA = -14,
+ RPMI_ERR_RESERVED_START = -15,
+ RPMI_ERR_RESERVED_END = -127,
+ RPMI_ERR_VENDOR_START = -128,
+};
+
+static inline int rpmi_to_linux_error(int rpmi_error)
+{
+ switch (rpmi_error) {
+ case RPMI_SUCCESS:
+ return 0;
+ case RPMI_ERR_INVALID_PARAM:
+ case RPMI_ERR_BAD_RANGE:
+ case RPMI_ERR_INVALID_STATE:
+ return -EINVAL;
+ case RPMI_ERR_DENIED:
+ return -EPERM;
+ case RPMI_ERR_INVALID_ADDR:
+ case RPMI_ERR_HW_FAULT:
+ return -EFAULT;
+ case RPMI_ERR_ALREADY:
+ return -EALREADY;
+ case RPMI_ERR_BUSY:
+ return -EBUSY;
+ case RPMI_ERR_TIMEOUT:
+ return -ETIMEDOUT;
+ case RPMI_ERR_IO:
+ return -ECOMM;
+ case RPMI_ERR_FAILED:
+ case RPMI_ERR_NOTSUPP:
+ case RPMI_ERR_NO_DATA:
+ case RPMI_ERR_EXTENSION:
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/** RPMI linux mailbox attribute IDs */
+enum rpmi_mbox_attribute_id {
+ RPMI_MBOX_ATTR_SPEC_VERSION = 0,
+ RPMI_MBOX_ATTR_MAX_MSG_DATA_SIZE,
+ RPMI_MBOX_ATTR_SERVICEGROUP_ID,
+ RPMI_MBOX_ATTR_SERVICEGROUP_VERSION,
+ RPMI_MBOX_ATTR_MAX_ID,
+};
+
+/** RPMI linux mailbox message types */
+enum rpmi_mbox_message_type {
+ RPMI_MBOX_MSG_TYPE_GET_ATTRIBUTE = 0,
+ RPMI_MBOX_MSG_TYPE_SET_ATTRIBUTE,
+ RPMI_MBOX_MSG_TYPE_SEND_WITH_RESPONSE,
+ RPMI_MBOX_MSG_TYPE_SEND_WITHOUT_RESPONSE,
+ RPMI_MBOX_MSG_TYPE_NOTIFICATION_EVENT,
+ RPMI_MBOX_MSG_MAX_TYPE,
+};
+
+/** RPMI linux mailbox message instance */
+struct rpmi_mbox_message {
+ enum rpmi_mbox_message_type type;
+ union {
+ struct {
+ enum rpmi_mbox_attribute_id id;
+ u32 value;
+ } attr;
+
+ struct {
+ u32 service_id;
+ void *request;
+ unsigned long request_len;
+ void *response;
+ unsigned long max_response_len;
+ unsigned long out_response_len;
+ } data;
+
+ struct rpmi_notification_event *notif_event;
+ };
+ int error;
+};
+
+/** RPMI linux mailbox message helper routines */
+static inline void rpmi_mbox_init_get_attribute(struct rpmi_mbox_message *msg,
+ enum rpmi_mbox_attribute_id id)
+{
+ msg->type = RPMI_MBOX_MSG_TYPE_GET_ATTRIBUTE;
+ msg->attr.id = id;
+ msg->attr.value = 0;
+ msg->error = 0;
+}
+
+static inline void rpmi_mbox_init_set_attribute(struct rpmi_mbox_message *msg,
+ enum rpmi_mbox_attribute_id id,
+ u32 value)
+{
+ msg->type = RPMI_MBOX_MSG_TYPE_SET_ATTRIBUTE;
+ msg->attr.id = id;
+ msg->attr.value = value;
+ msg->error = 0;
+}
+
+static inline void rpmi_mbox_init_send_with_response(struct rpmi_mbox_message *msg,
+ u32 service_id,
+ void *request,
+ unsigned long request_len,
+ void *response,
+ unsigned long max_response_len)
+{
+ msg->type = RPMI_MBOX_MSG_TYPE_SEND_WITH_RESPONSE;
+ msg->data.service_id = service_id;
+ msg->data.request = request;
+ msg->data.request_len = request_len;
+ msg->data.response = response;
+ msg->data.max_response_len = max_response_len;
+ msg->data.out_response_len = 0;
+ msg->error = 0;
+}
+
+static inline void rpmi_mbox_init_send_without_response(struct rpmi_mbox_message *msg,
+ u32 service_id,
+ void *request,
+ unsigned long request_len)
+{
+ msg->type = RPMI_MBOX_MSG_TYPE_SEND_WITHOUT_RESPONSE;
+ msg->data.service_id = service_id;
+ msg->data.request = request;
+ msg->data.request_len = request_len;
+ msg->data.response = NULL;
+ msg->data.max_response_len = 0;
+ msg->data.out_response_len = 0;
+ msg->error = 0;
+}
+
+static inline int rpmi_mbox_send_message(struct mbox_chan *chan,
+ struct rpmi_mbox_message *msg)
+{
+ int ret;
+
+ /* Send message for the underlying mailbox channel */
+ ret = mbox_send_message(chan, msg);
+ if (ret < 0)
+ return ret;
+
+ /* Explicitly signal txdone for mailbox channel */
+ ret = msg->error;
+ mbox_client_txdone(chan, ret);
+ return ret;
+}
+
+#endif /* _LINUX_RISCV_RPMI_MESSAGE_H_ */
--
2.43.0
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2024-12-16 8:49 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-16 8:48 [RFC PATCH 0/8] Linux SBI MPXY and RPMI drivers Anup Patel
2024-12-16 8:48 ` Anup Patel
2024-12-16 8:48 ` [RFC PATCH 1/8] riscv: Add new error codes defined by SBI v3.0 Anup Patel
2024-12-16 8:48 ` Anup Patel
2024-12-16 8:48 ` [RFC PATCH 2/8] dt-bindings: mailbox: Add bindings for RPMI shared memory transport Anup Patel
2024-12-16 8:48 ` Anup Patel
2024-12-16 10:41 ` Rob Herring (Arm)
2024-12-16 10:41 ` Rob Herring (Arm)
2024-12-16 18:49 ` Conor Dooley
2024-12-16 18:49 ` Conor Dooley
2024-12-17 4:19 ` Anup Patel
2024-12-17 4:19 ` Anup Patel
2024-12-24 2:19 ` Leyfoon Tan
2024-12-24 2:19 ` Leyfoon Tan
2024-12-24 3:07 ` Anup Patel
2024-12-24 3:07 ` Anup Patel
2024-12-16 8:48 ` [RFC PATCH 3/8] dt-bindings: mailbox: Add bindings for RISC-V SBI MPXY extension Anup Patel
2024-12-16 8:48 ` Anup Patel
2024-12-16 10:41 ` Rob Herring (Arm)
2024-12-16 10:41 ` Rob Herring (Arm)
2024-12-16 8:48 ` [RFC PATCH 4/8] RISC-V: Add defines for the SBI message proxy extension Anup Patel
2024-12-16 8:48 ` Anup Patel
2024-12-16 8:48 ` Anup Patel [this message]
2024-12-16 8:48 ` [RFC PATCH 5/8] mailbox: Add common header for RPMI messages sent via mailbox Anup Patel
2024-12-16 8:48 ` [RFC PATCH 6/8] mailbox: Add RISC-V SBI message proxy (MPXY) based mailbox driver Anup Patel
2024-12-16 8:48 ` Anup Patel
2024-12-24 3:21 ` Leyfoon Tan
2024-12-24 3:21 ` Leyfoon Tan
2024-12-26 11:51 ` Anup Patel
2024-12-26 11:51 ` Anup Patel
2024-12-16 8:48 ` [RFC PATCH 7/8] dt-bindings: clock: Add bindings for RISC-V RPMI clock service group Anup Patel
2024-12-16 8:48 ` Anup Patel
2024-12-16 10:41 ` Rob Herring (Arm)
2024-12-16 10:41 ` Rob Herring (Arm)
2024-12-16 8:48 ` [RFC PATCH 8/8] clk: Add clock driver for the " Anup Patel
2024-12-16 8:48 ` Anup Patel
2024-12-17 20:14 ` Stephen Boyd
2024-12-17 20:14 ` Stephen Boyd
2024-12-19 4:42 ` Rahul Pathak
2024-12-19 4:42 ` Rahul Pathak
2024-12-24 6:21 ` Leyfoon Tan
2024-12-24 6:21 ` Leyfoon Tan
2024-12-27 3:42 ` Rahul Pathak
2024-12-27 3:42 ` Rahul Pathak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241216084817.373131-6-apatel@ventanamicro.com \
--to=apatel@ventanamicro.com \
--cc=ajones@ventanamicro.com \
--cc=anup@brainfault.org \
--cc=atishp@atishpatra.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jassisinghbrar@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=leyfoon.tan@starfivetech.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh@kernel.org \
--cc=rpathak@ventanamicro.com \
--cc=sboyd@kernel.org \
--cc=sunilvl@ventanamicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.